CSA network dock

Similar Questions

• Toshiba DVD Network Dock II - LAN driver installed but does not

  Toshiba DVD Network Dock II PA3007E-1DST

  I found this file on the internet: "t8103cl9" and I don't remember how I did but I managed to make it work!
  I needed to reinstall Windows 98 SE on my laptop because I had to, but I have other installation for example driver Sound, driver graphics driver and modem but I installed "t8103cl9" and in Device Manager it happens 'Toshiba PCI LAN FastEther II paper. "

  However, I can't access the network on Internet Explorer 6.0 or Mozilla Firefox!

  Any suggestions appreciated
  Nick

  I m wondering why you started new thread on the Toshiba DVD Dock II network because I found another thread 2nd in this forum that you opened some time ago
  However, as the LAN card is already recognized in Device Manager, the issue should not be the missing LAN card driver, but from my point of few LAN connection has not been configured correctly.

  To be honest it of a long time since I worked with this ancient system in Win 98SE and I do not exactly remember the steps how to configure the local and internet network to help Win 98SE, but knowledge base Microsoft contain a lot of useful KB article on different themes.

  I found this one:
  http://support.Microsoft.com/kb/192534/

  I hope this helps you solve the problems of network connection.

  Of course, I recommend to search in internet for more FAQ and HowTo in which case the article would not be useful.

• Drivers for PA3007U DVD Portege 7200 CT Network Dock II

  Hello

  Does anyone know how to get the drivers Toshiba PCI FastEther LAN on Docker II (the network DVD Dock II PA3007U) to work in Windows XP?

  The NIC is a 3Com card, but it's device id (VEN_10B7DEC_E000) is not listed on the 3Com site.
  The 3com card identifier does ' t detects the map well their logo is on the dock.

  As far as I know that Toshiba will not support XP on this machine because it is too old. However, the brand of the network card in the set menu is

  10/100 Ethernet 3COM 3C920 (3C905C-TX Compatible)

  Take a look at the site of 3COM for the 3C905C drivers. Who can help.

• CSA 4.5 - cale network

  We have csa 4.5.1.616 agents installed on the workstations about 100 windows with installed network dock, is there an easy way to uninstall the hotfix network?

  Thank you

  You can disable the loading of the hold in the registry, I don't think that you can uninstall. key = HKLM\SYSTEM\CurrentControlSet\Services\csanet\Enable = 0

  Just keep in mind that your shield network dominates the habit have an effect more.

  Jan

• Latitude E6330 - WiFi adapter turned off when it is docked - there are still

  Hello

  I have a Dell Latitude E6330 is fine, but when I plug it in the docking station, it uses the card NETWORK docking stations, but disables WiFi.

  Here, the WiFi is a different network and I need both.

  Any suggestions?

  (Windows 7 64-bit)

  Thank you

  Update for AColes:

  I found install the last Manager of power (under System Utilities downloads) solves the problem of Wi - Fi disconnection.

  Unfortunately, in thermal management methods are broken!  Dell software is a Whack-a-Mole of bugs.

• OneLink + don't Dock no network in Windows PE

  Hey all, I'm trying to push an image using SCCM for a X 1 Yoga that we ordered. As it doesn't have an ethernet port, we want the image using the OneLink + Dock. We can start Windows PE, but he does not see the network from the dock. After a few hours of research, I have a problem confirming exactly what drivers, we need in Windows PE, or if it is still possible to do using the docking station. Any help would be much appreciated!

  
  

• With the help of the cable network goes down TB15 Dock

  I have a new XPS 15 9550 and a dock TB15.  So far, the road has been long and hard to get this operational PC.  One of the issues pending my couple is that when I plug in an ethernet cable in the TB15 dock, it seems to hang the dock.  I lose the audio and video of her output.  To recover, I can unplug the ethernet cable, unplug the Thunderbolt of the PC cable, wait a few seconds and then plug the bolt of lightning cable back in.  I installed all the new network and the drivers for the XPS 15 9550 dock.

  Everyone knows a similar problem?  Any ideas on what I could do to fix it?

  Thank you!

  This procedure seems to solve the problem of ethernet with the dock:

  Go to the properties of the right WIFI, 'Control configuration\reseau and Internet\Network connections', click on the map of WI - FI, properties, configure, advanced, power output. Change from 100% to 75%.

  Source:
  en.Community.Dell.com/.../20915913

• Internal network card is cut off when I remove my XPS M1710 the docking station

  Hello

  I have a xps M1710 laptop. I normally use a docking station and the internal network card works fine when the laptop is in the docking station. But now when I remove the laptop from the docking station for the network adapter is disconnected.

  I know that it stops when the battery mode to save energy, but it is always closed when I connect to a power supply for laptop. I tried the plug before you turn on the computer and it does make a difference.

  It's not happened before and I have to go to the internet on my laptop earlier, when not to use the docking station.

  Any ideas on how to solve this problem?

  
  

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Pier show shared network - Manager profile

  Running the Server 5 and el cap, if I add network shares to a dock users that they show as a question mark that is not resolved when you click on it.  I think it's because of the network shares mapped AFTER THAT the docking station is responsible.  It wasn't a problem at the time of the Workgroup Manager, but things have changed to ovviously...

  I created a login script to 'kill the dock' after a period of time.  I also have a logoff script that did other things, so I don't know that the correct settings are enabled to allow scripts to run.

  Runs the script .sh during the session of the user refresh the dock and the network properly shortcuts card.  However, it is not automate as I want it too.  Ive has set the script to pause for 20 seconds, but it still does not for some reason any.

  Here is my script that is saved as a .sh and CHMOD 777 and then transferred to the Profile Manager in the section "login scripts.

  #! / bin/bash

  # Dock charging

  sleep 25

  Killall-KILL Dock

  output

  Anything obvious ive done wrong?

  Thank you.

  Just read this in another forum

  "

  • The connection-hook script runs synchronously before other connect actions and must therefore be short.

  "

  This explains why my script doesn't work as I had hoped.  I will try to start a file of a volume mapped instead network and see if it works.

• Elite x 3 Dock desktop: desktop dock use lan

  Just a quick question: the x 3 uses the connection to the local network of the dock office. It seems to me that it does not work. There seems to be no LAN settings in Windows Mobile 10 when it is docked.

  If this isn't the case, he plans to use the LAN DeskDock x 3 connectivity in the near future?

  Thank you

  Yes it works.

  I tried on my HP Elite x 3 by turning off cell phones and WiFi and connect an ethernet cable. For example, I could update my Garmin maps, which was a 3 GB download. (Note that this is super fast like wired is generally much faster than the wireless.)

  Also by email, browser WhatsApp and Edge worked as usual.

  There is actually no settings to configure, but most networks are DHCP / autoconfig anyway.

• Zbook G3 HP: HP Zbook Thunderbolt 3 Dock USB ports not working not

  I have a HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I've recently updated the BIOS and the firmware to the latest version to solve other problems 'dock '.  Am now at the latest for both.  The two monitors and ethernet on the work of lightning 3, but none of the USB ports are active.

  I am sure that the USB ports work, because they used to work before the update BIOS and firmware.  Keyboard, mouse, or USB memory on the dock work.

  I tried to go to the HP support and install the updates with the USB in it, but it didn't work.  I have a workaround - just connect the laptop directly, but I'd like to get my fully functioning dock.

  Device Manager does not display devices with questions.  I'll try to update, but I don't know which one to look at.

  

  Hey people,

  HP is dedicated to providing quality products to meet the needs of our customers. We listen to the customer feedback on our recent Thunderbolt Dock for use with the latest products ZBooks, and Elite Notebook. We continue to work with our customers to solve problems.

  Please find tips and updates to improve your use of the HP Thunderbolt docking station.

  1. The Thunderbolt dock uses the latest technology thunderbolt. To be fully functional, it takes the latest firmware, BIOS, and drivers to work properly. Please follow the step by step process as described below in "The process of updating your device".
  2. Here are links to the user, technical white paper guide helps and guides troubleshooting. Please, use them to help when you have problems after you have fully updated your device and platform by following the instructions above. Please note that you may copy and paste the links in your browser.
  3. If you still have any questions, please call HP support. We're here and eager to help succeed you using the HP docking station new Thunderbolt.

  Useful links

  User Guide: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586 & docLocale = en_US & docId = emr_na-c05141189

  Technical white paper: http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.pdf

  Help & troubleshooting the Dock: www.hp.com \support\thunderbolt3dock

  Process to update your device

  NOTE: Instructions below is found in the User Guide "Getting Started" to "Implementation of the dock" to "step 2: update your computer.

  Before connecting the dock to your computer, update the BIOS, software and drivers on your computer.

  NOTE: If you do not, the wharf may not work. For best performance, keep all software and drivers on your computer up to date. (See table 1)

  Update the BIOS and the software and drivers:

  1. Go to http://www.hp.com/support. Select the drivers and Get software, enter your model of computer (on the computer service tag) number, and then select search for my product.
  2. Click the link for your specific computer, select your operating system and then download the latest version

  BIOS, software and drivers as follows: Intel® Thunderbolt Firmware Update Utility, Intel's Thunderbolt

  Secure Connect Driver, graphics drivers, ASMedia eXtensible Host Controller Driver, Broadcom Ethernet

  Controller and driver Conexant USB driver.

  1. Install the latest version of the BIOS.
  2. Restart the computer.
  3. Install the last stroke of lightning Secure Connect driver Intel.
  4. Restart the computer.
  5. Install the latest Intel Thunderbolt Firmware Update Utility
  6. Restart the computer.
  7. Install any remaining updates in any order. Restart the computer after each update.

  Table 1

  For the products supported Thunderbolt Dock all HP
  Name of the component	Category on the Support Page on hp.com	Where to check (this applies to all laptops)
  BIOS	(BIOS)	BIOS F10 Setup to information system
  Intel's Thunderbolt course connect driver	(Pilot - controller)	Right click on tray icon Thunderbolt to settings for details.

  The Thunderbolt of Intel® firmware update utility

  (Firmware)

  Right click on tray icon Thunderbolt to settings for details. Note that the numbers on the left will not directly reflected. NVM Firmware Version: 16 PD Firmware Version: 1.07.03

  Intel Graphics Driver

  (Driver - graphics)

  Right click on the desktop to graphic properties (icon intel) Options & Information Center Support.

  NVIDIA graphics driver

  (- Graphics - Nvidia driver)

  Right-click on the desktop to NVIDIA control panel to information system at the bottom left.

  AMD graphics driver

  (Driver - graphics)

  Right-click on the desktop to graphic properties (top) to Information to software.

  ASMedia eXtensible Host Controller Driver

  (Driver - Chipset)

  Programs & features or the Device Manager to Universal Serial Bus Controllers (dock of needs to be connected).

  Of Broadcom Ethernet controller driver

  (Driver - network)

  The Device Manager to network adapters (dock of needs to be connected).

  Conexant Audio Driver USB

  (Audio - driver)

  The Manager of devices to sound, video and game controllers (dock of needs to be connected).

  BPPSQ-

  I work on behalf of HP

• Never connect some WiFi networks...

  Sometimes, when you are traveling I'll find myself looking to take advantage of the wifi airport... about 50% of the time my mac connected without problem. The rest of the time he is there right and acts like it is connected but nothing never loads in the browser.  This happens only on wifi networks that require some sort of "disagreement with the terms" screen or a paywall.   If I leave everything and restart then sometimes it fixes, but not always, and it's a terrible solution.

  Anyone know why this kind of thing happen?

  If you connect OK 50% of the time, then you are doing very well.

  AirPort WiFi networks are often overcrowded with too many users trying to use the same network at the same time. In this case, the result is slow... or not... connections. Nature of the beast, I'm afraid.

  If you belong to a club of the airline which offers separate private space for its members, the WiFi in these areas almost always works fast and reliable.

  One thing that might help a little... is to remove from the list of networks that your MacBook has signed in the past, allowing him to quickly find available networks when you need a connection.

  Open System Preferences (gear on the dock icon)

  Open Network

  Click Wireless on the left to highlight Panel

  Click the Advanced Options button at the bottom right of the window

  Here you will see a list of wireless networks that your MacBook is connected to in the past

  Click on the name of a network that you no longer need to highlight

  Then, click on the - (less) button at the bottom of the list to remove this network

  Do the same for all the other networks that you no longer need

  Click OK at the bottom right of the window

  Click apply in the next window that appears

  Close the windows and then restart your MacBook

• Portege 7020CT: PXE - of1 message appears when using the docking station

  It is used to anchor OK but now he refuses and displays this error message:

  "" PXE - of1: PCI vendor and device ID do not match! ".

  I would really appreciate some help on this, because without e dock I have no entries or exits.
  Is this something to do with being properly "OFF"?

  PROTECTED 7020CT Windows XP

  Hello

  Well, to my knowledge the PXE error because the device is not able to boot from the local network.
  Have you tried to boot from LAN or something like that?

  Enter the BIOS and change the boot order. Perhaps you set the LAN at the first stage in the boot order, and therefore the unit will try to boot from LAN.

  I also found this site:
  http://support.Intel.com/support/network/adapter/1000/sb/CS-010508.htm

  There are and advice to install the last Boot Agent. I put t know if it helps but you can try it.

• Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

  Hello Forum;

  Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

  I need for my construction work 2 monitors.

  My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
  Some have said, that after a connection with the DVI - D VGA connector is turned off.

  Someone at - he experiences?

  On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
  This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

  This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

  Someone out there experimenting with this docking station?

  What would be the best way to work with two monitors + the computer screen?

  Thanks for all the good advice.

  Michael

  Hello

  As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
  So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

  The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
  The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.