Uninstalled chrome, tbird cannot access my gmail anymore. Reinstalled tbird, told me 'username or password is incorrrect' when it is not.
Used tbird for my gmail for years without problem. Uninstalled Chrome the browser and suddenly tbird became a message "connection refused". Tried everything. Completely uninstalled/reinstalled TBird. It made no difference. I have a user name or incorrect password. (It is not). This sounds like the two factor authentication something but I don't know how to fix it. I went all over gmail settings, look for the two factor auth thing and find "audit of step 2' is disabled." What's past and how to make tbird back to work with my gmail accounts? (I have not whant to reinstall chrome, thanks.)
The first error indicates the ISP database doesn't have your e-mail prodiders domain information.
The second shows an ability to connect using the credentials used.
Google is in the database, he said your firewall to block something like Thunderbird or the ports or the areas needed it is to say Thunderbird.net and gmail.com.
Tags: Thunderbird
Similar Questions
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
cannot access my gmail account
Pauline smith mcdermott Google home page
cannot access my gmail account - * address email is removed from the privacy *More details would be useful; for example, you get an error when you try to access the page (what a mistake), you can access the page, but it won't take your password, etc..
Gmail support tracking can help: http://mail.google.com/support/bin/answer.py?answer=46346 -
Cannot access Yahoo mail anymore in Windows Live Mail
Use windows live mail (Version 2011 (Build 15.4.3538.0513) with updates, trying to extract 'yahoo plus mail' like last year.)
I have windows 7 with all updates for a year or two. Since the beginning of the week, cannot get/send mails.Can't send or receive messages on behalf of Yahoo mail more. An incorrect password was entered. The next time that you send or receive messages, you will be asked to enter your user name and password for this account.
Server error: 0x800CCC90
Server response:-ERR [AUTH] invalid username or password.
Server: 'plus.pop.mail.yahoo.com '.
Windows Live Mail error ID: 0x800CCC92
Protocol: POP3
Port: 995
Secure (SSL): YesAll double parameters checked by my son (computer scientist). I can access e-mail with the browser. We vtried password reset, disable the firewall on McAfee
Can anyone help?
Hello
The question you have posted is related to Windows Live and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
-
Started happening today (22/07/2015) - after the re-opening Firefox this afternoon, I couldn't connect to Yahoo, G-mail accounts, as well as other protected by password. Fortunately, I could access these accounts in Chrome. I don't have browsers save the passwords. I always type them in manually. How can I access these accounts in Chrome and not Firefox? JavaScript or what? The whole Flash issue is also boring. I use more other browsers. Please fix, or I forget quite using Firefox.
Safe mode is a troubleshooting mode that turns off temporarily
hardware acceleration, restores some settings and disables
-Add-ons (extensions and themes). If the problem disappears,
that tells us something. If it is not the case, this tells us something else.- Step 1
Type of topic: preferences #advanced< enter > in the address bar.
Under Advanced, select General.
Find and stop using hardware acceleration.Restart Firefox. Is always the problem?
- Step 2
It could be the work of one of your modules.
Type of topic: addons< enter > in the address bar to open your add-ons Manager.
Access key; < Control >(Mac: < command >)< shift > has)In the Manager of Add-ons, on the left, select Extensions.
Disable some add-ons, then restart Firefox.Some added addons toolbar and anti-virus are known to cause
Firefox issues. Disable all of them.If the problem persists, disable some more (restarting FF). Continue until the
the problem disappeared. After, you know which group is the origin of the problem.
Reactivate the last group ONE AT A TIME (reboot FF) until the problem reports.Once you think you have found the issue, that disable and reactivate all the
others, then restart. Let us know who the suspect is detective. -
Safari, chrome time cannot access most of the sites on my MacBook Air
All of a sudden since the morning of today I can access most of the sites except Google, Facebook, and LinkedIn. Safari and chrome have the same problem. I tried to empty cache, remove extensions, change dns 8.8.8.8 in Network preferences, but nothing seems to work. can someone please advice what to do.
I have OS X Yosemite with Safari 9.0.2
Thank you!
You may have installed one or more variants of the malware "VSearch' ad-injection. Please backup all data, and then follow the instructions from Apple Support to remove it.
If you have problems with these instructions, or if they do not work, see below.
Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.
VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.
1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:
/Library/LaunchDaemons
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named "LaunchDaemons" can open. Search inside the two files with the names of these forms:
com.something.daemon.plist
com.something.Helper.plist
com.something .net - preferences.plist
com.something.Preferences.plist
Here, something is a variable character string, that may be different in each VSearch infection. So far it has always been an alphanumeric string without punctuation signs, such as the 'cloud', 'point,' 'Highway', 'underwater', or 'trusteddownloads.' Sometimes, it's an empty string like 'e8dec5ae7fc75c28' instead of a Word. Sometimes, the string is "Apple", and then you must be particularly careful not to delete the wrong files, because many built-in OS X files have similar names.
You may have more than one copy of the malware, with different values of something.
There may be one or more files with the name of this form:
com.somethingUpd.plist
where something may be a different meaning empty string in other files. Yet once, there may be more than one file of this type, with different values of something.
Here's a specific example of an infection VSearch:
com.disbalance.daemon.plist
com.disbalance.Helper.plist
com.thunderbearerUpd.plist
You will have files with similar names, but probably not identical to these.
2. If you find such files, let the open LaunchDaemons folder and open the file following the same way:
/Library/LaunchAgents
In this case, there may be a file named
com.something.agent.plist
where the channel something is the same as before.
If you feel confident that you have identified the above files, back up all data, and then drag the files - nothing - to the trash only. You may be prompted for administrator login password. Close the Finder Windows, and then restart the computer.
Do not delete the folder 'LaunchAgents' or 'LaunchDaemons' or anything else inside either.
3 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select
▹ Safari preferences... ▹ General
and click on
Set on the current Page
The malware is now permanently inactivated, as long as you reinstall it never. You can stop here if you want, or you can delete the other two components for completeness.
4. This step is optional. Open this folder:
/Library
It may have subfolders that are named as follows
something
somethingUpd
where something is one of the channels that you have seen before. Drag all these subfolders to the trash, and then close the window.
Do not delete the folder "Library" or anything else inside.
5. This step does not apply to the OS X 10.11 ("El Capitan") or later and it is optional if you are using an older version of Mac OS X.
In this folder:
/System/Library/Frameworks
There may be an element named exactly
v.Framework
either a named item
Something.Framework
Again, something is the same string as before.
This item is actually a file, although it has a different icon than usual. Drag it to the trash, and then close the window.
Do not delete the folder "Frames" or anything else inside.
6. If you do not find the files or you are not sure about the identification, after what you have found.
If in doubt, or if you have no backups, change nothing at all.
7. the penalty may have started when you have downloaded and run an application called "MPlayerX." It is the name of a legitimate free movie actor, but the name is also used fraudulently to distribute VSearch. If there is an element with that name in the Applications folder, delete it. I do not recommend to install the genuine "MPlayerX", because it is hosted on the rogue 'SourceForge' site and is bundled with other malware.
This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.
In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.
Then, still in system preferences, open the pane of the App Store or software update and check the box marked
Install the system data files and security updates (OS X 10.10 or later version)
or
Automatically download the updates (OS X 10.9 or earlier version)
If it is not already done.
-
I uninstalled the driver realtek audio, and then I lost everything. Windows doesn't detect any hardware on my device. Nothing seems to work now
[Moved from comments]Hi Mickey,
- What is the brand and model of the Acer laptop?
- Have you tried to check if the device is detected in Device Manager?
If you have access to the mouse and the keyboard please try the following steps:
Method 1:
If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
Run the tool and troubleshooting hardware devices
Method 2:
Use Device Manager to find the hardware changes.
Note:
Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.
To check the hardware changes, follow these steps:
a. Click Start, type Manager of devices in the search box of start and press ENTER.
In Device Manager, click on your computer so that it appears highlighted.
b. click Action and then click Scan for hardware changes.
c. check the USB device to see if it works.
d. restart the computer.Method 3:
Download the drivers using another computer by visiting the manufacturer's website save it to a location external (USB key) and then install it in the computer in question.
Please post back with the State of the question.
-
Cannot access Mac on LAN with the name of user and password correct
I have two Mac Pros, it of brand-new and came with El Capitan installed, the other I've just updated to El Capitan.
I need to have access to the Mac via my local network and would usually use the option in the sidebar of the Finder. I can't access the new Mac.
I have the good registered user name and password, but every time I try to connect it just shakes and refuses to connect. Strangely, if I choose screen sharing, it works perfectly!
Is there something obvious that I do not forget to allow me to access the first Mac?
Thank you
Adam
by chance, you have file sharing enabled on the new Mac? (Preferences system - share - file sharing) Looks like you have active screen sharing, but not file sharing.
-
Original title: network path was not found
HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.
Hi gauravadavadkar,
Thanks for posting your query in Microsoft Communities. Provide the following information:
· Did you do changes on the computer before the show?
· What is the full error message?
· Work on a domain?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with networkand check if the problem persists.
S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Startand then click run.
(b) type msconfigand click OK.
The System Configuration utility dialog box appears.(c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.
(d) when you are prompted, click restart to restart the computer.
Method 3: Follow the steps in the article.
How to troubleshoot a network home in Windows XP
In Windows network connection issues
You can read this article for more information:
Windows wireless and wired network connection problems
I hope this helps. Let us know if you need more assistance.
Thank you.
-
Cannot access a file after reinstalling Windows XP
After a system crash that trashed my MBR, I reinstalled windows XP and renamed my computer. Now, I'm locked on one of my previous files. How can I access this file again?
See here:
How to capture a file or a folder in Windows XP
John
-
I get the message; D; ------isn't function of accessible.incorrect, whenever I try to copy anything either on a disk in the CD-rom Drive.I can play discs on the device, but if I try to ask a folder or my photo gallery, get the same message. How can I fix this, please? Stan shorts
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?See the bottom of the articles that might help you resolve this problem.
How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
http://support.Microsoft.com/kb/324129You receive an "Incorrect function" error message when you try to save a file from an Office program on a CD - RW or a DVD/CD-RW drive
http://support.Microsoft.com/kb/905431 -
Cannot send email to msg of error that e-mail from senders is incorrect when it is not
Got email for years and received today saying error message could not send email because the senders email was incorrect
Without more information, check your account via webmail if you have this ability, and see if it works very well from there. The case, which is sometimes useful, is to remove your e-mail account, close and reopen any email program you use and then add your account to e-mail back again. If this does not work, contact your email provider to resolve the problem.
Steve
-
error message "Windows cannot access the specified device, file, or the path."
Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.
Hi nanditaberi,
Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?
This problem may be caused by this security software on the computer, uninstall them might solve the problem.
Example: AVG, Zone Alarm
Important:
O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.
Ø you may need to check with the manufacturer of security software for reinstallation and activation.
O re - install the security software on the computer.
Reference:
Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.
A scanner online for any threat and try to correct
http://OneCare.live.com/site/en-us/Center/cleanup.htm
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot access my C drive whn saving quicken files
Windows 7 Home Premium operating system.
Initially, I couldn't access the C drive because I got the message that I need administrator privileges. I found the answer to fix this problem, but when I try to save my quicken, data files for the quicken directory, I get the message, "there is no such thing as c:\program Quicken, you want to create? When I click Yes I get a message "Please enter a valid directory." I type in C:\program files\quicken\qdata12.qdf-backup command line.
There are two folders Program Files under Windows 7. The second is Program Files (x 86) quicken where was installed. I tried to type C:\Program Files (x86)\quicken\qdata12.qdf-backup and get the message cannot access the C: drive.) Please make sure the disc is ready, and the disk is not write protected.
I never had this problem on my other computer that is running Windows XP Home Edition SP3.
No, it isn't a problem with Quicken. By a previous answer, the problem is Windows 7 Home Premium 64 bit running. It does not allow access to the Quicken directory as was the case of all other versions of windows and quicken which I've used since 1991.
In Windows 7 Quicken is installed in C:\Program Files (x 86) \Quicken. Is the path of the file for saving my file qdata12.qdf: C:\Users\myusername\AppData, because that Win 7 protects the program files.
RCWhite thanks for the answer.
-
I cannot access files W7 Pro both a remote computer (XP Pro) and a virtual machine (XP Pro not XP Mode) on my network. I see the folders but it says that I have no rights. I can access of W7 but not vice versa. In XP mode, I can access the file from W7. What is going on?
Dennis
Hello
For assistance on this issue, you can ask your question in the link below.
Windows 7 IT Pro
http://social.technet.Microsoft.com/forums/en/category/w7itpro
Maybe you are looking for
-
How to make ticker rss to Web sites of active power after marking of the power set as read?
Cannot do recharge now.
-
How to move from Lookout 6.5 to 6.7
I'm moving from 6.5 to 6.7. When I try to do he wants to do a full install. Is there a way just to do the upgrade?
-
The data execution program has wiped my mailboxes (in OE)?
I was deleting a file duplicate photographs, because my system said that memory was getting short. I got a message saying that the program execution of data necessary to shut down the system, and when it is restarted, the file photos was back where
-
Also, I can't see all my icons have an e with a yellow thing around them.
-
This printer can be connected to the home network with only iPads? Not available for installation of PC.