Uninstalling Netgear WG111v3 blocks Windows 10

Similar Questions

• HP Photosmart D110a: how to UNINSTALL "HP ePrinterCenter" of Windows 7?

  Someone knpws how to UNINSTALL "HP ePrinterCenter" of Windows 7?

  Thank you.

  Hi wuopisht,

  If you talk about the HP eprint printer driver, then you can delete the printer driver by following the steps below.

  1. on your windows machine, click on the windows button and then click on devices and printers.

  2. under printers and faxes, you will see all of the installed printer drivers.

  3. right click on the one you want to uninstall.

  4. Select Delete device and follow the instructions to uninstall.

  This will delete the printer from your windows driver 7. Make sure you click on the right printer driver.

  * It is recommended to any other printer driver [which is the one you want to use] the value by default rather indented other printer drivers. Where you need more you can use.

• Cannot uninstall the program and Windows Update.

  Original title: RUNNING WINDOWS VISTA 32. WINDOWS INSTALL STOP WORKING. CAN NOT INSTALL OR UNINSTALL.

  HOW to REINSTALL WINDOWS INSTALL OR GET to WORK IF I can NOT INSTALL anything, INCLUDING WINDOWS UPDATES.

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         You get the error message?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/2438651

  Method 2:

  Check if the installation of windows services are running. Follow these steps:

  a. Click Start, type Services.msc and press ENTER.

  b. double-click Windows Installer.

  c. set the start type for Windows Installer to manual.

  d. Click Start to start the service.

  e. click OK.

  Method 3:

  Re-register the windows setup program. Follow these steps:

  a. click Start, click run and then type cmd in the dialog box, and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  c. to unregister the type install windows MSIExec /Unregister.

  d. to re-register MSIExec/regserverwindows installer type.

  e. try to uninstall the update from Windows.

• I can't uninstall Photosmart B209 on Windows 7

  I can't uninstall Photosmart B209 on Windows 7.  Disk and I tried Control Panel did not work.  Any suggestions

  Hey,.

  Have you tried running the uninstaller built into the temp for the B209 folder?  Try the procedure described below.

  1. run the disk cleanup on your computer

  2. download and run the software and the drivers below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3777182&

  3. once the download is done retrieve, cancel the download.

  4. press on the Windows key + R on the keyboard to bring up the run menu.

  5. tap folder in the field to run, and then click OK.

  6. Locate and open the folder starting with 7z (example: 7zS2356)

  7 open the Util folder

  8 open the CCC folder

  9. run the L4.bat uninstall_ for computers not HP.  For HP computers, run the Uninstall_L3.bat

  10. once the uninstall is complete, restart the computer

  11. install an Accessories\ System Tools Disk Cleanup

  12. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  13 use this tool to clean the system and the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damage or loss of data caused by the utility.  This step is optional.   You can skip if you want.

  http://download.CNET.com/advanced-SystemCare/3000-2086_4-10407614.HTML?part=DL-6271865&Subj=DL&tag=button

  14 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3777182&

  15. run the download to reinstall the printer

  Some of the instructions are for a re - install and can be ignored if you just want to uninstall.

  So, if necessary try to launch the link below from Microsoft for programs that can not install or uninstall.

  Solve problems with programs that cannot be installed or uninstalled

• How to uninstall and re-install Windows Media Player 12?

  Help!

  I had a windows 7 Packard Bell Pc load pretty much since when Windows 7 is released.

  Media Player was always full of problems (mainly loading websites Web and any old logo in the directory of the image).

  Now, he won't play same videos web based and said media player is not installed correctly and must be reinstalled - sends you to the MS site but not to download.

  I pay for BT HE advise and they had no way to remove and reinstall Media player 12.

  I tried to download Media player 11 but it happens like no download for this operating system!

  As I said... help!

  Concerning

  Chris

  Hello Dollar1973,

  To develop on the post of Andrew, I would uninstall, and then reinstall Windows Media Player.

  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try using the troubleshooter to see if this fixes

  the problem.

  Open the troubleshooter of settings of Windows Media Player by clicking the theStart button, and then clicking Control Panel. In the search box, typetroubleshooter, and then click Troubleshooting. Click all, and then click the Windows Media Player settings.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How do you uninstall the narrator in Windows 7

  How do you uninstall the narrator in Windows 7

  To disable the Narrator:

  1. To open Narrator, click the Start button, and then in the search box, type narrator. In the list of results, click Narrator.

  2. Click control whether Narrator starts when I connect.

  3. Clear activate the narrator and turn on Audio Description check boxes, then click on apply. You may need to restart.

  http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

• Impossible to uninstall a program in Windows 7

  I'm trying to uninstall a program in Windows 7. Does not allow me to uninstall. Not even get any error message. He just used uninstall.

  How to manually uninstall this program?

  Thank you

  Hello

  Try to uninstall with Revo Uninstaller: http://www.revouninstaller.com/revo_uninstaller_free_download.html

  You can also download a portable version that does not need to be installed.

  If you don't know how to use it, please see: https://www.youtube.com/watch?v=K_FHWDKi14Q

  Hope this helps,

  J

• I want to uninstall the upgrade of windows 7 and go back to Vista.

  This device comes preinstalled with Vista so that I only have the recovery disks that I made when I first set up the computer.  How can I uninstall the upgrade of windows 7 and reinstall Vista?

  BogeyB,

  If you have made a real upgrade (overlay on Vista), you might be surprised.  Click on the computer and open the D Recovery drive.  Open the folder named Recovery. Look at the bottom left corner.

  What is the date of creation?  Mine is from 2007.  I do not superimpose WIN 7 until 2011, but the recovery is still 2007.

  It's actually your full version of Vista recovery... it didn't get deleted or altered, except if you did.

• If I bought a computer with windows 8 is already installed (windows 8 sucks) can I uninstall it and install windows 7

  If I bought a computer with windows 8 is already installed (windows 8 sucks) can I uninstall it and install windows 7? Windows 8 has to be the worst software ever. It is like going back to the iceage of computers. The LAGS and timing on is horrible. I expect right cruse, that she does not exist. It's like a person driving a car with their foot constantly on the brake.

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

• How to remove or uninstall a program in windows 8

  How to remove or uninstall a program in windows 8

  Hi Michael,

  We are happy to get your query on Microsoft Community.
   
  Regarding the question to uninstall an application or program in Windows 8, please follow these steps:
   
  Method 1:
  
  
  Uninstall an application on the Start screen:
  
  (1) on the start screen, type the name of the application you want to install.
  (2) in the list select the required one and do a right-click on the program.
  (3) you will get different options at the bottom of the screen. Select Uninstall.
   
  Method 2:
  
  Alternatively, you can uninstall a program from the Control Panel:
  
  1) press Windows and the x button to open a list of tasks from the lower left corner of the screen.
  (2) select Control Panel.
  (3) select programs and features.
  4) double-click the program you want to uninstall, and then follow the instructions on the screen.
  
  I hope that now, it would be easier for you to uninstall any program. Please write us back if the problem still persists.

• How to re - install Photoshop CS6 after you have uninstalled it from my Windows PC?

  How to re - install Photoshop CS6 after you have uninstalled it from my Windows PC? I want to uninstall my present download because I have problems with it and re - install.

  Hello

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

  Download link:-applications download Creative Suite 6

• Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

  We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How to uninstall Roku 3 on Windows 7?

  Hello everyone, Iv'e looking for a Roku 3 884 on my PC, but I can not find it. I Kow its there because it appears in Windows media player12 when I want to use the server to read my music files. I have an amplifier/server that I use with windows media player. When I click on read with: where my system appears, usually it works but sometimes there is Roku 3 884 that appears in Windows media player and blocking my server and I can not play music on my server. I checked on uninstall programs, on C:\\, and App data, but I can't find the 3 884 roku. So I was wandering if a member in the forum, which could help me to solve my problem. Thank you.

  You use the feature of "play to" WMP?

  If Yes, see this article http://windows.microsoft.com/en-GB/windows7/using-the-play-to-feature-to-stream-media#section_5

  and see the 'manage... '. ' Article on how to remove the unwanted devices.

  If this is not the case, can you please explain exactly step by step what you do.

  Thank you.

• Do not uninstall the language on Windows 7 Ultimate pack

  I tried to upgrade to Windows 8 (my upgrade key is just for Windows 8, not Windows 8.1), but then it stops on a message windows Explorer (Yes, instead of display in the install window, it appears on IE which does not help me much) saying I can't go further if I uninstall all first language packs.

  So I did, but the Korean language pack fails to uninstall. It's the final result:

  

  I tried using the following commands, also without success:

  Lpksetup/u ko-KR/s

  DISM/Online/Remove-Package /packagename:Microsoft-Windows-Client-Refresh-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7601.175146.1.7601.17514

  That's what I get from the windows event log "setup" on the event viewer:

  
   
     
      3
      0
      0
      0
      0
      0 x 8000000000000000
     
      3038
     
     
      Setup
      Rodrigo-PC
     
   
   
     
        SP1 Language Pack
        Absent
        0x80070005
        Lpksetup
     
   
  

  And that's what I have on CBS.log:

  2014-03-17 11:49:32, error CSI 00000fac@2014/3/17:14:49:32.896 (F) d:\win7sp1_gdr\base\wcp\sil\merged\ntu\ntsystem.cpp(703): native STATUS_ACCESS_DENIED error of the function WorkAroundBackupIntentForFilesystem expression: TmpStatus
  [gle = 0 x 80004005]
  2014-03-17 12:00:29, error CSI 00000fad (F) STATUS_ACCESS_DENIED #4656311 # to Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile(flags_=_0,_handle_=_{provider=,_handle=0},_da_=_(FILE_GENERIC_READ|)) FILE_WRITE_ATTRIBUTES | FILE_WRITE_EA | FILE_APPEND_DATA | FILE_WRITE_DATA), oa = @0x1c9d8c8--> OBJECT_ATTRIBUTES {s:48, rd:, on:[83]"\SystemRoot\WinSxS\Temp\PendingRenames\e88f5439ed41cf01fa0300009c04641b.desktop.ini"; a: (OBJ_CASE_INSENSITIVE);} SD:@0x10475880}, iosb = @0x1c9d910, ACE = 524 (0x000000000000020c), f = 0 x 00000027, his = (FILE_SHARE_READ |) FILE_SHARE_WRITE. FILE_SHARE_DELETE), d = FILE_OPEN_IF, co = (FILE_NON_DIRECTORY_FILE |) FILE_SYNCHRONOUS_IO_NONALERT | (0 x 00004000), eab = NULL, eal = 0, disp = (null))
  [gle = 0xd0000022]
  2014-03-17 12:00:29, error CSI 00000fae@2014/3/17:15:00:29.486 (F) d:\win7sp1_gdr\base\wcp\sil\merged\ntu\ntsystem.cpp(2062): native STATUS_ACCESS_DENIED error of the function expression Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile: (null)
  [gle = 0 x 80004005]
  2014-03-17 12:11:46, error CSI STATUS_ACCESS_DENIED (F) #4656310 00000faf # to Windows::Rtl:SystemImplementation:CIniFile_IRtlIniFileTearoff: Commit (...) [gle = 0xd0000022]
  2014-03-17 12:11:46, error CSI STATUS_ACCESS_DENIED (F) #4628031 00000fb0 # to PrimitiveInstaller::CCoordinator:FinalizeChanges (...) [gle = 0xd0000022]
  2014-03-17 12:11:46, error CSI STATUS_ACCESS_DENIED (F) #4353012 00000fb1 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0000022]
  2014-03-17 12:11:46, error CSI STATUS_ACCESS_DENIED (F) #4353011 00000fb2 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0000022]
  2014-03-17 12:11:46, error CSI STATUS_ACCESS_DENIED (F) #4353010 00000fb3 # to CCSDirectTransaction::GenerateComponentChangeList (...) [gle = 0xd0000022]
  2014-03-17 12:11:46, error CSI STATUS_ACCESS_DENIED (F) #4353009 00000fb4 # to Windows::COM:CPendingTransaction:ExtractInformationFromRtlTransaction (...) [gle = 0xd0000022]
  2014-03-17 12:11:46, error CSI 00000fb5 (F) HRESULT_FROM_WIN32 (ERROR_ACCESS_DENIED) #1492897 # to Windows::COM:CPendingTransaction:IStorePendingTransaction_Analyze (...) [gle = 0 x 80070005]
  2014-03-17 12:11:46, error CSI 00000fb6 (F) HRESULT_FROM_WIN32 (ERROR_ACCESS_DENIED) #1471382 # Windows::ServicingAPI:CCSITransaction:ICSITransaction_Commit(Flags_=_47_(0x0000002f), pSink = NULL, disp = 0, coldpatching = FALSE) [gle = 0 x 80070005]
  2014-03-17 12:11:46, error CSI 00000fb7 (F) HRESULT_FROM_WIN32 (ERROR_ACCESS_DENIED) # 3808619413 #1471381 by Windows::ServicingAPI:CCSITransaction_ICSITransaction:Commit(flags_=_0x0000002f,_pSink_=_NULL,_disp_=_0)
  [gle = 0 x 80070005]
  2014-03-17 12:11:46, info CBS setting ExecuteState key: ExecuteStateNone
  2014-03-17 12:11:46, Pavilion Info CBS RollbackFailed setting to 0
  2014-03-17 12:11:46, info CBS Clearing HangDetect value
  2014-03-17 12:11:46, CBS info saved last overall progress. Current: 0, limit: 1, ExecuteState: ExecuteStateNone
  2014-03-17 12:11:46, CBS Exec info: restore operations because of a CSI pilot commit failure.
  2014-03-17 12:11:46, error CBS Exec: impossible transaction CSI hangs because transactions cannot be merged: 0 [HRESULT = 0x80070005 - E_ACCESSDENIED]
  2014-03-17 12:11:46, 00000fb8@2014/3/17:15:11:46.356 CSI CSI Transaction Info @ destroyed 0x6a2b4b0
  2014-03-17 12:11:46, CBS Perf info: all InstallUninstallChain.
  2014-03-17 12:11:46, info CBS cannot run the chain of execution. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  2014-03-17 12:11:46, error CBS could not process the single-phase execution. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  2014-03-17 12:11:46, CBS WER info: generate report of failure for the package: Microsoft-Windows-Client-Refresh-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7601.17514, State: 0x80070005, source of failure: Execute, begin State: installed, target State: Absent, client id: lpksetup
  2014-03-17 12:11:46, CBS News has no query DisableWerReporting hint.  Assuming not only together... [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  2014-03-17 12:11:46, could CBS info add %windir%\winsxs\pending.xml to the WER report because it is absent.  Continue without her...
  2014-03-17 12:11:46, could CBS info add %windir%\winsxs\pending.xml.bad to the WER report because it is absent.  Continue without her...
  2014-03-17 12:22:27, CBS Reboot info brand Refs: 0
  2014-03-17 12:22:27, info CBS M²: Reporting change of package for the package: Microsoft-Windows-Client-Refresh-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7601.17514, current: installed, pending: default, start: installed, it is necessary: installed, target: Absent, limit: Absent, /hotpatch status: DisabledBecauseNoHotpatchPackagesInitiated, status: 0x0, source of failure: run, restart required: false, client id: lpksetup launched offline: False, execution sequence: 1720, merged first sequence : 1720
  2014-03-17 12:22:27, CBS M² info: Upload asked to report: PackageChangeBegin_Microsoft-Windows-Client-Refresh-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7601.17514, session id: 142859, sample type: Standard
  2014-03-17 12:22:27, CBS M² info: ignorant download request because the sample type is not enabled: Standard
  2014-03-17 12:22:27, CBS M² info: Reporting change completion for package package: Microsoft-Windows-Client-Refresh-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7601.17514, current: installed, original: installed, target: Absent, status: 0x80070005, source of failure: run, details of the failure: "(null)", client id: lpksetup launched offline: false, execution sequence: 1720, merged first sequence: 1720
  2014-03-17 12:22:27, CBS M² info: run time performance datapoint is not valid. [HRESULT = 0 X 80070490 - ERROR_NOT_FOUND]
  2014-03-17 12:22:27, CBS M² info: Upload asked to report: PackageChangeEnd_Microsoft-Windows-Client-Refresh-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7601.17514, session id: 142862, sample type: Standard
  2014-03-17 12:22:27, CBS M² info: ignorant download request because the sample type is not enabled: Standard
  2014-03-17 12:22:27, the start option Info CBS to LKG
  2014-03-17 12:22:27, CBS Exec info: end: nested restore point - full.
  2014-03-17 12:22:27, the State of the information CBS block restored system sleep: 0x80000000
  2014-03-17 12:22:28, CBS Exec info: complete treatment.  Session: 30360044_3010381984, package: Microsoft-Windows-Client-Refresh-LanguagePack-Package~31bf3856ad364e35~amd64~ko-KR~6.1.7601.17514 [HRESULT = 0x80070005 - E_ACCESSDENIED]
  2014-03-17 12:22:28, error CBS could not perform the operation.  [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  2014-03-17 12:22:28, CBS Session info: 30360044_3010381984 finalized. Reboot required: no [HRESULT = 0x80070005 - E_ACCESSDENIED]

  I can't do a clean install on this system, this is why I really need to find a way to do it.

  I cannot even delete all files. If I could just 'put' all information registry for "Absent" again for this Korean package would be nice.

  Any help is welcome.

  Call

  Send SMS

  Add to Skype

  You will need Skype CreditFree via Skype

  OK, I found the solution and finally managed to remove the language pack and also install Windows 8! :)

  The CBS.log newspaper above, I decided to intentionally remove the file that was put to fire the error "Access denied". Then rerun the uninstallation, another file pulled the same mistake... but the CBS.log newspaper accused the first file is not found, so it would be completely ignored the "restoration" of the package file.

  So I realized that it was the uninstall was done: trying to do a "System Restore" 2 years ago. The file may be corrupted or would be too old for this... anyway, it doesn't matter. Since I knew he was trying to restore, I ran the Windows system cleaning and remove EVERYTHING, including the restore points "Service Packs" (by the way, that made me almost 7 GB of extra space!).

  Then I restarted the computer and was able to remove the package!

• I can't uninstall Thunderbird to my Windows programs "Uninstall list"; Why does not uninstall and be removed from this list?

  Very frustrating... under windows ' programs/uninstall a program "list, Mozilla Thunderbird is still listed AFTER that I have removed completely (I thought) from my computer. I clicked on 'uninstall' several times and nothing happens. I can't take the fact that Mozilla has set it up so that it can apparently be deleted from this list... What is everything? I tried to research the problem, even by using your Web site without success. All what I want to do is get out of my list to uninstall/change. I used this program AND will not use it. I don't want this program on my computer/list period. I would appreciate your help.

  It is a problem with the management of Windows applications. Mozilla does nothing to interfere with the installation/uninstallation process.

  You could re - install Thunderbird so re-synchronization of the list of applications, then uninstall again, or you could use a utility to remove from the list.

  A search of thunderbird.exe will confirm whether or not it was really deleted, but you may need to disable all the fool-proofing that implement Microsoft for not to see the true state of the file system; Configure to display hidden files and the extensions of file to start.

  Thunderbird is almost independent. You are free to delete manually the folder that the application resides in if Windows fails to uninstall it for you, but that will not solve the incorrect appearance of thunderbird in the list of installed applications.