Uninstalling SAV allowed that Windows update to work

Similar Questions

• Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing

  Hello

  Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing.

  Zone Alarm has a key valid license - but for some strange reason, he will not have, so I had to uninstall and reinstall ZoneAlarm - he tells me that I need this update - who will not come?

  Note: Windows Firewall is turned on right now and when I look at 'exceptions' does not offer updates of windows as part of the selection list.

  Please, any advice on this will be greatly appreciated.

  Alan

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  I started to reinstall Windows XP, after he has screwed up and I discovered that all the system snapshot
  I created backups worthless - MS removes automatically after 90 days...

  But when reinstalling Windows XP Pro MCE 2005 I managed to beat or dodge the many problems - like all the
  famous error when update .NET Framework 1.1 Service Pack 1 and many others
  Suddenly I met an error generated by Microsoft of NONRECOVERABLE type!

  While trying to install Windows, I agreed that Windows was full of bugs and security flaws and
  need a large number of fixpacks installed via Windows Update.
  Such a group of patches is called KB930494 and the full name is:

  .NET framework 1.0 Service Pack 3 SYSTEM. WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Tablet PC Edition

  Windows Update gave a brief error msg that this update has failed and I have tried to run this update
  manually when it produces the following error message: (note he's telling the truth when it)
  claims that "Windows may not work correctly")

  ---
  KB930494 Setup error

  Error while updating your system.
  Windows XP has been partially updated and may not work properly.

  Ok
  ---

  So, this update of Microsoft killed my system - it sure that _ 'does not properly"more.
  Lots of things off, lots of BSOD...

  Og - of course I should have used the system restore and created a backup that I should come back...!
  I did well - but this bomb of viral type of Microsoft made sure it was not possible to create
  a valid system by restoring such a backup. Probably because half the file system matches the other.

  The worst part is - even if I try to reinstall Windows again, avoiding this Virus created by MS, how can I be sure that
  This will be the only disguised bomb nothing extraordinary provided by Windows Update as necessary security patches?

  So guys, what is the best utility backup/restore partition there?

  Rgds. E. Ben

  Use Partiton Lofic is a down load for free on the partition, you can also use Easeus Disk Copy. It is a free program with a friendly interface.

• I got the Conficker virus and now I can't get Windows Update to work

  I got the Conficker Virus/worm infected my system, but have now got rid of him (I think).

  I noticed yesterday that Windows Update has just stopped working, it has a red symbol X and said 'windows update cannot currently check updates because the service is not running'. Then, I figured that it could be a virus and tried to download AVG anti-virus, but the virus stopped me to access a website or a program to do with protection against viruses (including all Microsoft sites). Finally, I used a separate laptop and negative to download AVG and some other anti-virus/malware programs and down them mode without failure. I then ran Windows malware removal tool. That seems to have gotten rid of the virus (which has been identified as Conficker), I can now go to any Web site, so it seems that the virus is gone or disabled.

  However I can not even access Windows Update. My guess is the virus disabled some component of it, but how now operate again? Is it possible to re-enable it manually? Or y at - it something that I can download to fix?

  Hello

  Conficker often comes with other malware, so once you think that you're rid of him real problems then begin run through
  They are 100% sure that everything is clear and get it fixed.

  For those who think they might have Conficker:

  You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.

  Check with this site
  http://www.confickerworkinggroup.org/infection_test/cfeyechart.html

  Alert on the Win32/conficker virus
  http://support.Microsoft.com/kb/962007

  Protect yourself from Conficker
  http://www.Microsoft.com/security/worms/Conficker.aspx

  How to remove the worm Downadup Conficker (Uninstall Instructions)
  http://www.bleepingcomputer.com/virus-removal/remove-Downadup-Conficker

  How to manually remove the Conficker worm
  http://www.411-spyware.com/Conficker-worm-removal#how-to-remove

  BDTool to remove
  http://www.bdtools.NET/

  -----------------------------------------------

  Run the removal tool malicious Microsoft, Scan with Malwarebytes and run Prevx to be sure he's gone. (If necessary
  use UnHackMe below).

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  --------------
  Run these:

  Malwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
  http://www.Malwarebytes.org/

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------

  Here are some free scanners online help if needed (skip if not):

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Run Malwarebytes when you can.

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  Close IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Don't forget to do:

  Logon as administrator

  Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN

  Enter each of these one at a time and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset
  ------------------------------------------------------

  Here are a few rootkits if it were a question:

  SpyDLL Remover - free
  http://securityxploded.com/spydllremover.php

  Advanced Windows Service Manager
  http://securityxploded.com/winservicemanager.php

  Run the Rootkit Revealer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspx

  UnHackme - trial 5.5 or later version
  http://www.Greatis.com/UnHackMe/

  This tells you how to use UnHackme and has a link to the version 2.5 - use in good standing with
  the current version available as above is 5.5 or later
  http://safecomputing.umn.edu/guides/scan_unhackme.html

  IceSword - free
  http://www.AntiRootkit.com/software/IceSword.htm
  Instructions and pictorial
  http://securityxploded.com/IceSword.php
  Tutorial for use of IceSword
  http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3D

  Revo Uninstaller - free
  http://www.revouninstaller.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Update stopped working on my Vista system.

  Error message indicates the service is not started, but the list of services that Windows update as "started."  Rebooting makes no changes.

  Malware scan shows clean.  Norton 360 clean registry showed the key for "lack of program windows\system32\wuaucpl.cpl" and delete this key.

  How can I fix?

  My last use of this computer was in December 2011 and this is the last time I used Windows update on it, and it worked normally.

  It's on my laptop HP Vista 32 bit factory-installed.

  Error message indicates the service is not started, but the list of services that Windows update as "started."  Rebooting makes no changes.

  Malware scan shows clean.  Norton 360 clean registry showed the key for "lack of program windows\system32\wuaucpl.cpl" and delete this key.

  How can I fix?

  My last use of this computer was in December 2011 and this is the last time I used Windows update on it, and it worked normally.

  It's on my laptop HP Vista 32 bit factory-installed.

  "Norton 360 registry clean"

  * sigh *.

  Double whammy.  Norton and the words "Clean Registry" in the same sentence.

  OK - no matter what you think you have, if you know that you have done the excact steps I'm about to give you in a different order, etc. - tracking them in the order shown, not not an ignorant because you have scanned with that even (or other product) 35 seconds before you read my answer, etc.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Reset.

  Download (save) system update and do a right click on it and "Run as Administrator". Choose the right one for you:

  • All supported x 86 Windows Vista (32-bit) versions
  • All supported based on x 64 (64-bit) versions of Windows Vista

  Let things run/fix.

  Reset.

  Try to update.

  If it still fails, try the following:

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the issue is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• APPCRASH svchost.exe_wuauserv - Windows Update stopped working - Vista Ultimate x 64

  "Windows Update has stopped working" - exact error message. I spent three months of reading the forums, looking for answers and applying diligently solutions - which none have worked - of course :)

  This is not the problem of BITS. Yes, I also tried sfc/scannow. This isn't a new installation of Vista. Latest updates of success were 24 January

  The error relates to: APPCRASH - svchost.exe_wuauserv
  Exception code: c0000005
  Exception offset:... 001029cd

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: svchost.exe_wuauserv
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Default name of the Module: c:\windows\system32\wuaueng.dll
  Fault Module Version: 7.2.6001.788
  Timestamp of Module error: 48f7aab3
  Exception code: c0000005
  Exception Offset: 00000000001029cd
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 7177
  Information additional ca 7 1: 6
  More information 2: f5301b6cae295bf8a2fa5c4797c21e55
  3 more information: 53dc
  Additional information 4: 2655659e60e9fe4d553a061dcca31137
  (in print manually so Colocation errors above)

  Please, I am desperate to solve this problem and finally get secure windows-without even reinstalling Vista :)

  Thank you very much

  Hello ms_frustrated,

  I recommend that you perform a repair installation.  It would be the fastest way and repair you the computer and while still keeping your documents.  PLEASE SAVE YOUR SYSTEM VISTA FIRST.  The link below explains how to perform a repair installation.  After your installation, verify that Windows update works before installing anything.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/58ed3b94-D603-4FEC-83CA-b3d15d1275b8/

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I said that Windows update to download all updates, but let me choose when to install them.

  I asked the question "I said that Windows update to download all updates, but let me choose when to install them."
  I thought that my problem was resolved, but the problem is still ongoing.

  The link to my previous question and answers is http://social.answers.microsoft.com/Forums/en-US/user/threads?user=Stew1957

  Please help, what else can be tried.

  PS I have since uninstalled MSE and installed Norton Antivirus 2011

  1. my hard drive has been formatted and re loaded from scratch.

  2. my opperating sytem is 32 Bit Win 7.

  Thanks stew

  To avoid confusion, please report all further follow-up replies to your original thread, stew: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3aeb2786-6fee-46e8-9d30-f54e1143a9e1

  Thank you!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update not working 641 code

  I'm having a problem with the installation of windows updates. I get code 641. I tried to find solutions on the internet, but nothing has worked. I have Vista x 64 sp2 installed. I looked in the services that are running and installed windows is not listed. My last windows update which worked was on 11/04/2012. Thanks to all who can help.

  Not, in my opinion, no.

• Windows Update stopped working.

  I have the 64 bit version of Windows 7 SP1 installed on my laptop [Dell Studio 1747 with processor i7 4 GB RAM & 750 GB hard drive.  Windows Update stopped working on my machine.  All updates through April 19, 2016 have been installed.  I already did the following:

  (1) installed the previous images dating back to several months

  (2) only run WindowsUpdateDiagnostic.diagcab to get error # 0 x 80070005 several times

  (3) race reset Win Update.bat unsuccessfully

  (4) run MicrosoftEasyFix20179.mini.diagcab without success

  (5) I tried install subinacl.msi and runs the recommended Reset.cmd file

  (6) installed WindowsUpdateAgent-7, 6 - x 64 .exe

  All the latter were applied as suggested on the Microsoft Support Website.  None of these maneuvers in addition to the various applications of my antiviral software and malware, brought any resolution of the problem.  I would appreciate any suggestion short of a new facility, because I can't seem to find anywhere, all the new boards.

  I don't know what worked, but Windows Update started to update itself again.  What I don't have, though, was to limit the number of updates, I got the update at some point, less than 30.  I read a post at one point noted that a large number of updates may increase the risk of errors of download and installation.  I had some mistakes on the first download, but those corrected when I download tracking the rest of the updates.  I do not wish that Microsoft would create a repair or update protocol independent site, because it seems that this is not an uncommon problem.

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After that Windows update restarted as requested, by getting only now white screen

  After that Windows update restarted as requested, by getting only now white screen.

  Unable to set up windows

  I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good

• Impossible to install KB2686827 and KB2656368, keeps telling me that Windows Update encountered an unknown error. Code 641

  Check and fix the completed transaction. All of the files and registry keys listed in this operation were repaired successfully.  But I'm not able to upgrade windows (KB2686827) and (KB2656368).  Its keep telling me that Windows Update encountered an unknown error. 641, the code Please HELP. I have Windows Vista Home Premium 32 bit. Thanks in advance.

  Original title: of my CBS.log

  Try the manual download for both method:

  Update of security for Microsoft .NET Framework 4

  Update of security for Microsoft .NET Framework 4

• Windows update Error 80070020, I can't "click to open Windows Update to work!

  Windows update Error 80070020, when I go to safe mode, by mode, I can't "click to open Windows Update to work!

  Hi RichardReeks,

  I suggest you follow the steps in the article to resolve the problem you are experiencing:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825/en-us

• Blue screen 116 every time that Windows updates

  original title: 116 every time that Windows Update BSOD

  OK, so I'm in a bad mood, so this will be brief. I managed to understand I get BSOD every time I update my graphics driver, and I have no idea what kind of card I because it is a company built PC (never buy Dells) and the owner of this PC (that is to say my father and family) reinstalled Windows compeletly before I could look, so all I have is "Standard VGA Graphics Adapter" in the Device Manager. Try to manually update the drivers causing the BSOD once I chose to run windows normally (it runs in safe mode now too, which is of course the pre reinstall improved)

  So I don't really know what to do at this point.

  Hello

  Dell can tell you what the graphics device in the computer is so check with their support, their online
  documentation and drivers and ask in the Dell forums for known issues. Check the model number
  of your computer on the Dell Site for drivers - it should indicate the appropriate driver.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ========

  The fact that it BlueScreens when you try to update the driver could indicate there is something wrong
  with the video device. Because it has a "Standard VGA adapter' this means that the driver does not load.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.