Uninstalling the pacs of service program
How to uninstall windows xp service PAC 3? I am able conclusion/installation of Director of windows and want to return to service PAC 2.
There are 4 different ways to remove the SP3 in the link that I you provided with.
Have you tried each of the 4 methods?
Tags: Windows
Similar Questions
-
Uninstalling the MS Security Essentials program
I can't uninstall MS Security Essentials. I said that I do not have sufficient privileges, and I am logged on as administrator. How can I fix?
Hi Keith,
What version of Microsoft Security Essentials is installed on your computer?
Refer to the steps in the following Microsoft article and check if that helps.
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
Note: If the problem persists, I suggest you to report the same issue in Microsoft Security Essentials, since we have a dedicated support for this.
Microsoft Security Essentials: http://answers.microsoft.com/en-us/protect/forum/mse?tab=all
Keep us informed on the status of the issue.
-
Impossible to uninstall the old Brother printer program
Original title: program won't uninstall
(1) try to uninstall the program (old Brother printer)
(2) Add/Remove Programs list displays the name of the program
(3) deletion FAILS with something like "blah, blah... lack of bits & pieces... blah, blah."
(4) no idea how can I RID this mess?
Hello
(1) you are able to uninstall other programs successfully?
(2) what is you get the exact error message?
(3) have you made recent changes to the computer before the show?
I suggest to run than Microsoft Fixit mentioned in the article and check if it helps to solve the problem.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
You can also read the following article and check if it helps.
-
I recently installed Windows 7 64 bit on new HD of Vista 32 bit on my HP Pavilion dv6000 laptop. I was watching the services running as I have had problems with IE 9 gel and crush several times when I have found the running game of CLCV0 service to autostart with no description of what it was or did. I googled find bad things about this service especially. So I'm looking a computer to find the associated program UTSCSI, who showed me that it is in the C:\Windows| SysWOW64 folder.
Hello
Method 1:
I suggest you to control in safe mode with network and perform clean boot.
Step 1:
Advanced startup options, including the SafeMode (check in SafeMode with networking)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
Tips for solving problems when Internet Explorer hangs or stops working
http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer
How to manage add-ons in Internet Explorer 9
http://Windows.Microsoft.com/en-us/Windows7/how-to-manage-add-ons-in-Internet-Explorer-9
Method 3:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate
-
Uninstalling the application using cmd program
I have recently installed a program that s my laptop did not start. Have tried to uninstall it via cmd, but after typing the command 'get the product name', it shows this message
Node - MININT-QR8DMD5
ERROR:
Description = class invalid.
Displays only a navyblue creen how do through this. Kindly help.
Hello Antony,
Thanks for posting your question on the Microsoft community.
This question fits better to the developers on MSDN forums.
I suggest you to ask your question on the MSDN forums.
MSDN forum
https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/home?category=windowsdesktopdevThank you
-
Using Windows XP.
In Control Panel, open network connections and the Internet. Right click on your network connection, and then select Properties. You should see the customer during the dialogue. You should be able to uncheck and remove it.
Otherwise, see http://www.novell.com/support/kb/doc.php?id=10059708
-
How can I uninstall the ask toolbar
Whin I try to uninstall the toolbar of all programs in the Control Panel, click on ask, click on uninstall and all I get is Error 1316 do not allow me to uninstall.
Try to start in safe mode by pressing F8 at boot time & select Safe mode.
You can also go to internet explore-> press ALT-> tools-> internet options-> programs-> Manage Add-ons-> click the toolbars section-> click on the Ask toolbar & click disable or the corresponding option there are.
You can run the System File Checker utility to check the alteration of system files & then try to uninstall.
to do this:
go to start menu-> type run-> right click Run-> click on run as administrator
Type SFC/scannow
Let the process run and complete. Restart your computer. Try to uninstall.
Concerning
Shantanu
-
How to uninstall the MyStart virus.
Title: mystart by blekko virus
I managed to download a virus MyStart accidentally. Any suggestions on getting rid of it?
Hi RWatson28,
I understand that you want to uninstall the MyStart virus.
Let us try the following methods; I'm sure this will help you to solve the problem.
Method 1:
Run Microsoft Safety Scanner.
Microsoft security scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.Method 2:
Try to uninstall the virus MyStart to programs and features.
Follow the steps for the same thing:
a. press the Windows key + X key, and click on Control Panel.
b. open programs and features.
c. Jeannot search toolbar.
d. select it and click on uninstall and follow the prompt.
e. Once you are done restart the computer.Just reply to the State of the question.
-
Several times I tried to install itunes but a message pops up saying
- Windows install is not properly installed and
I also try to uninstall programs and whenever it says the system administrator has set policies to prevent this installation, but I've changed my settings so that I can be the administrator
- the windows service install could not be accessed
HelloYou may encounter this error message when the Windows Installer files on the system are missing or damaged.You can resolve the error by using the methods mentioned below:Method 1: Start the Windows Installer servicea. Click Start, type "Services.msc" and press {ENTER}
b. double-click Windows Installer
c. the value of the Windows Installer Manual startup type
d. Click Start to start the service. Note the error message, if any.
e. click OK.
Method 2: Unsubscribe and re - register the Windows Installer
a. Click Start, click Run, type "MSIEXEC /Unregister." and then click OK. Even if you do it right, it may seem that nothing is happening.b. Click Start, run, type "MSIEXEC/REGSERVER" and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.After you run this command, the operation is complete.c. try your application based on Windows Installer again.
Method 3: Scan SFCPerform a scan of the SFC to check if this is related to the missing or corrupt file system.How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Service report - I uninstalled the program, but it continues to flow
I tried for days to get RapportService.exe to stop hogging my CPU usage. I uninstalled the program, but Microsoft said that I might need to remove the other files. I don't know where to find them and the program continues to run. I understand that this may be a program that need banks but at this point just want my computer to run correctly.
I found the answer when entering Safe Mode and disabling the program "ghost".
Back running.
Janet
-
Impossible to uninstall the program, lack of msi
I am trying to remove LogMeIn Server 2008 R2, we use more than the service, but I get an error "the feature you are trying to use is on an unavailable network resource. We no longer have logmein, therefore I can't reinstall to remove and when I looked around him made me the program install and uninstall the utility of Microsoft, but when I run it says that it is not compatible with my system. What other options are there to remove this unwanted program?
Hello
It's beyond our field of expertise. Please repost t; he deliver to TechNet Server Forum
LogMein help
-
Original title: cannot install WMP11, update rollup 2
I'm still on WMP 10 for a reason, and I wanted to connect my PC with 360 videos. I downloaded the update, but he told me to go get the Update Rollup 2 or something, so I tried to install it and he told me that I needed to go get the .NET framework 1.1 and .NET framework 1.1 SP1. I went to download them and install them, but he tells me that "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program".
I Googled, tried of all kinds, uninstalled SP3 and tried and nothing.
Hi xelliotx,I suggest that you follow these steps.Step 1:First of all, download and install .net Framework Cleanup Tool to remove selected versions of the .NET Framework on your computer.Step 2:Manually install the versions of Microsoft .NET Framework below:Microsoft .NET Framework Version 1.1 redistributable package
http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=enMicrosoft .NET Framework 1.1 Service Pack 1
http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=enOnce this installation is complete, try to install the other required software and check.See also:Error message when you install an update for .NET Framework 1.1 or the .NET Framework 1.0: "the upgrade patch cannot be installed by the Windows Installer service.
http://support.Microsoft.com/kb/940332
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Can I uninstall the Service Pack 3 on a computer preloaded with XP Professional/SP3?
I need to uninstall the Service Pack 3 of a delivered computer pre-loaded with Windows XP Professional with Service Pack 3. Is this possible? I read the support page for this, but to see if there is a difference between having SP3 preinstalled or updated through the windows update process.
No, unless Windows XP Service Pack 3 is listed in Add/Remove Programs, right.
Why do you ask? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title:
How to uninstall a program that does not appear on my conputer? I need uninstasll for Netware client services so that I can geyt my back to the Welcome screen
WHENEVER I TRY TO go BACK to MY SREEN WELCOME ORIGINAL SHOWING the USER ACCTS I GET THE MESSAGE THAT I need TO UNINSTALL the NETWARE. BUT AS I SAID I DO NOT HAVE THIS PROGRAM, AND I SEE NO FILE WITH THIS NAME
Hello
To work on the issue, check the following link.
Error message when you try to turn on welcome screen or Fast User Switching
Check if it helps. -
Cannot uninstall the program and Windows Update.
Original title: RUNNING WINDOWS VISTA 32. WINDOWS INSTALL STOP WORKING. CAN NOT INSTALL OR UNINSTALL.
HOW to REINSTALL WINDOWS INSTALL OR GET to WORK IF I can NOT INSTALL anything, INCLUDING WINDOWS UPDATES.
Hello
· You will remember to do recent changes on the computer before this problem?
· You get the error message?
I suggest you follow the steps mentioned below:
Method 1:
Follow the steps in the link and check if the problem persists:
http://support.Microsoft.com/kb/2438651
Method 2:
Check if the installation of windows services are running. Follow these steps:
a. Click Start, type Services.msc and press ENTER.
b. double-click Windows Installer.
c. set the start type for Windows Installer to manual.
d. Click Start to start the service.
e. click OK.
Method 3:
Re-register the windows setup program. Follow these steps:
a. click Start, click run and then type cmd in the dialog box, and then click command prompt.
b. at the command prompt, type the following and press ENTER after each line:
c. to unregister the type install windows MSIExec /Unregister.
d. to re-register MSIExec/regserverwindows installer type.
e. try to uninstall the update from Windows.
Maybe you are looking for
-
Satellite 5205-S703 (Windows XP Pro SP2) and TOSHIBA common modules
I have a laptop:Toshiba Satellite 5205-S703.After you have installed Windows XP Pro Service Pack 2, I can't install TOSHIBA common Modules (file: s140acpx.exe).During the installation of this program gives the message:"The installation is failure. Pl
-
Satellite A300-D 21W crash after clean windows7 x 64 installation
I just bought PC Toshiba laptop with Vista, and I tried to do a clean install of Windows 7 x 64. However, when you reboot a blue screen. I then run the restore function and I ", at the beginning. It only seems to happen whenever I update my system us
-
Satellite P200/300 - second HDD bay has no connector!
I became happy when I noticed 2 hard drive Bay. But there is no available sata connector! Just a few welds on the motherboard.If I weld a SATA CONNECTOR just like that; ves_Storage_Internal http://CGI.eBay.com/HP-Pavilion-dv6000-DV9000-SATA-Hard-Driv
-
I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question b
-
Hello I'm looking for a compatible Win 7 x 64 driver for my USB controller. Thank you. PCI\VEN_8086 & DEV_1E31 & SUBSYS_179C103C & REV_04PCI\VEN_8086 & DEV_1E31 & SUBSYS_179C103CPCI\VEN_8086 & DEV_1E31 & CC_0C0330PCI\VEN_8086 & DEV_1E31 & CC_0C03 \De