Unique code 134 time used?

Similar Questions

• I2C communication slows down over time using USB-8451

  Hi all!

  I try to communicate via a device slave using a USB-8451 I2C and I noticed that after a while the communication speed slows way.

  I can send and receive data very well and apparently my system seems to work. But the problem is that over time the speed of data transfer slows down so much so that if I let it run all night it has slowed to a crawl in the morning. My ultimate goal is to gather data, draw and save every second and at the beginning it is easily achievable, but after 10-15 hours I can no longer collect data as fast I need. I'm not quite sure if this is a problem with my code LabVIEW, the NI USB-8451 box or the slave device. But if I stop running the LabVIEW program and start it again, everything returns to normal.

  The slave device is a personalized card with a microchip PIC which acts as a slave I2C and returns the data at the request of the master. I can't imagine anyone will be able to determine if this is a problem directly, but if we can rule out the other two (code LabVIEW or the NOR-8451) as the source of the problem so I know it's my slave device.

  I've greatly simplified the LabVIEW code that I used to collect data on I2C and I see even this gradual slowing down over time. Attached, it's that the very simplified VI and the data file, it produced. I only ran it for about 45 minutes, but from the beginning to the end we see again that the enforcement timeframe is rising.

  I hope I'm just doing something stupid, thanks in advance!

  -Aaron

  Aaron,

  Do not have the additional module responsible for these functions, but I'm sure I know whats going on.  It seems that each time through the loop 'OR-845 x I2C Create Configuration Reference.vi' creates a new reference.  After a while it will start to slow things down.  Better to open the reference before the while loop starts and spend just the reference in the loop.  Don't forget to close the reference after the loop stops.

• When I try to download the update of windows I get an error code every time: 802440F.

  When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?

  @ Evanston only!...

  You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).

  Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck & achieve before Thanksgiving 2010!

• I try to add an image map for the first time using Dreamweaver CC

  I am trying to add an image map for the first time using Dreamweaver CC in an html site.

  I can get map controls is displayed when I select the image in the code, and I can select the rectangle tool.

  However, when I try to select the area of the image disappears from the section of the map of the properties viewer and I can't select the area for my hyperlink.

  What I am I missing videos online are it seems so simple, but something with my page is not allowing me to withdraw this.

  This is the code section and the image that I'm trying to add the link.

  < side class = "sidebar" >

  < img src = "images/flowchart.jpg" alt ="product dev. Flowchart">

  < / side >

  Please help or give me any advice... There might be something to do with the fact that my site is "sensitive"?

  Hello

  You could just add links to each box, but a better solution would be to use svg for this. Unfortunately, it is easier for me to write for someone who does not know svg to do.

  If you have Adobe Illustrator create your svg using this program, then it would be a case to add links manually to each box created in the svg code. SVG is an xml-based language and not a real image, even if this is how a browser will display the it.

  PZ

• How can I have 2 email accounts open at the same time using the apple mail icon?

  How to open 2 e-mail accounts at the same time?

  Hello carroll12,

  Thank you for using communities of Apple Support.

  I see that you do not want to open two e-mail accounts at the same time using the Mail application. I understand perfectly. I have multiple e-mail accounts set up in my Mail application. I'm happy to help you with this.

  You can have more than one e-mail account set up in the Mail application. The first time you open Mail, it may prompt you to add an e-mail account (if you have not already done). Select an account type, and then enter your account information. To add another account, choose Mail > add an account, select an account type, and then enter your account information. Make sure that the Mail check box is selected for the account.

  If you have already both set in place, and I just want to be able to view both on the screen at the same time, open Mail, and then click file at the top.  From there, select the option for the new window of the observer.  This will open a new window where you can see each of the individual mailboxes on the same screen.

  Have an amazing day!

• A method exists to make an executable of labview and derive the source code as screws used to create?

  Were there any type of methodology to take a labview executable and code source screws used to create the VI extrapolating?

  If the diagrams were not removed during the build (by default, they are deleted).

• Please give me the html code ready for use

  Dear Sir

  Please give me the html code ready for use

  Yes, we know now, it's the Telugu ;-) In any case, the subject of the question is not in this forum.

• Error codes when you use windows update 0 x 643

  Error codes when you use windows update

  Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

  Hey Joe,

  You can check if this article helps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update

• I forgot passwoar hotmail id but I've got the unique code

  I forgot passwoar hotmail id but I've got the unique code

  You will find support for Windows Live Hotmail in these forums: http://windowslivehelp.com/forums.aspx?productid=1

• All that print from the web doing in the HTML code. I use the family XP Edition version

  All that print from the web doing in the html code. I use the family XP Edition version.  I'm almost on my home computer so I don't know when it happened first.  Try to print the boarding card.  Help.

  Thank you

  Hi GordonHarris,

  ·         You use Internet Explorer? If so, what version of Internet Explorer?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  (a) click Start, Control Panel, Add and remove programs.

  (b) click on set program access and defaults, select custom, select Internet Explorer as your web browser by default.

  (c) click OK.

  Method 2: Follow the steps in the article, if you are using Internet Explorer.

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479

• How to fix it. Problem of "Serial Cable using IrDA Protocol" it says Code 43 I use window XP

  How to fix it.  Problem of "Serial Cable using IrDA Protocol" it says Code 43 I use window XP I have no idea what the point is that the origin of the problem. Is there a link I can go to-to solve this problem? Thank you in advance.

  Yes, just right click on the device in Device Manager and select uninstall.  When you restart, Windows can detect the device and try to reinstall.  If the error is returned, post back - if this error is related to a laptop that has an infra-red (IR) integrated connector, you can disable this device in the BIOS.

• When logging in to my email account, I get a red message that I tried to sign in too many times using an incorrect id or password

  After signing several times in & control my mail today, suddenly when signing once again, I get a red message that I tried to sign in too many times using an incorrect id or the password. WHAT? I have NOT changed or the other lately... and have certainly not today! I don't like having my daily work routine interrupted by this measure obviously fake message/security, when I don't do anything different from what I have already done many times today! Please correct this problem immediately... Without that I have to change anything or even interrupt my schedule. Thank you. By the way... I grow increasingly wary of any company of which the customer has as much bad contacting help with their product. And grow more and more suspicious with this incident. What is happening with your safety that I can't just leave my settings as is? Please take the time to look at this before decide me that your company's products just aren't worth the headache.

  Hello

  · What email client you use to access your emails?

  If you work on Hotmail or Windows Live then it would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

  You can also access: Microsoft's strategy concerning lost or forgotten passwords: http://support.microsoft.com/kb/189126

• I have re loaded vista home prem but its saying that my activation code is in use

  original title: ACTIVATION
  I have re loaded vista home prem but its says my activation code is in use, what do I do?

  This is normal - you must activate by phone.

  If this fails, publish a report MGADiag...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• driver chipset download code 80070490 error using Windows updates

  original title: try to download intelr 829456 chipset family code 80070490 error, microsoft has tried to adapt it still download of may not run solutions

  Hi, I keep getting a notice from windows update down load an update of the family of chipsets intel r 829456 Express.com when I do I get a code error 80070490, used good microsoft it solutions I get a message from windows update components must be repaired don't know what to do next , or if I need this update?, or is there a way to stop this request to make this update? Dave

  Hello

  Did you change your computer?

  I suggest you to see link and check.

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!