Unit of Bango statements

Similar Questions

• Preventivo per risoluzione su problema unita PowerVault LTO5 request

  Description problema: the Ultimo nastro di inserito backup e anything bloccato all 'interno dell' Unità e non e più possibile only estrarlo it looping di espulsione relativo. It displays da codice di error 6. Unita e gia stata replaced in passato per lo stesso problema, quando era ancora in co.

  Service etiquette: H7VD002

  Order number: 431606436

  Giacomo Caramanico

  Administrator COMPUTER - Weatherford Mediterranea S.p.A.

  085 9051698 - Mobile 345.4746555 interno

  Buongiorno, the sto contattando by mail

• OfficeJet Pro 8620: Locked out of the printer settings

  Good evening

  I was unable to print wireless so I did a network reset the unit. When I rebooted the machine, I proceeded to return to the network settings in order to capture the wireless information however I received the error "function has been locked by the administrator or the person who set up your printer".

  I'm not sure what is the problem with that I'm the one who created this printer. I assign a password to the machine, and with that, I have no option to enter in order to unlock all the features (there is usually an option under 'Tools'.).

  After some searching through the forums, I printed a wireless test and the results were a single FAILURE for Wireless on.

  Any help/suggestions would be greatly appreciated.

  Kind regards

  Mark

  He had a semi full reset, which once preformed resturned unit to its state of semi reset and allowed me to change the settings I made.

• Portege - cannot access after BIOS update

  People,

  I've been struggling with this unit for some time now and I seem to be progressively worse.

  My current problem is that I can access is no longer the BIOS after changing a setting in the BIOS that USB emulation (or something like that). I was trying to make the boot from a USB device and turn well enough with all the settings to see what would work.

  This one has not. And now the unit no longer meets the F2. It is as if he is ignorant of the keyboard. DOH!

  Is it possible to reverse or re-flashing the BIOS? Or another way to access? I tried an external keyboard, without success.

  How did I get here?

  Well... I was given this unit to factory State, and I couldn't find an obvious option that would do that, other than Maintenance Toshiba utility which looked hopeful. He offered to erase the partition (which, at the time, seemed fair enough) - BUT THIS "S all there - the machine just starts repeatedly, displays"Please insert system disk"and then reboots.»

  OK, I'm a jerk - but it seems ridiculous for Toshiba to offer an option that instantly brick machine?

  In any case, I moved this problem to one that is much more serious. Not being is not able to access the BIOS means I have all the options - unless one of you wonderful people help me to discover one.

  Help

  I have since discovered that setting depending on whether I was going to set - Secure Boot - may have solved the problem - but now that F2 has no effect, so I "can't" to try it.

  What model phone you have and what operating system are you using?

  If you use Win8.1, you have access to some BIOS settings using settings in the control panel. Check it out please.

• HP ENVY 17 Laptop: HP Recovery Manager

  After updated to 10 Windows in Windows 7, I open HP Recovery Manager and get the message saying"recovery controller speaker has for Windows 7. It is not compatible with Windows 8 ".

  Can I update Windows 10 HP Recovery Manager?

  Please notify.

  Thank you

  Hello

  Unfortunately, the Recovery Manager application works only with the original operating system that the device delivered with and can not be updated.

  Also a long time that you have created your recovery media (on discs or a usb flash drive), this can still be used to return the unit to the State wherever it was when you bought first it - see the following link.

  http://support.HP.com/GB-en/document/c01867418

  Kind regards

  DP - K

• After changing the German OEM for Windows XP Pro SP2 do not work my Realtek AC97

  Hello everyone,

  After I changed the OS on my Satellite m40x.

  My sound card does not work.
  I have downloaded the driver of sound-sm40x-xp - 510005740t .zip. It detects unknown multimedia Audio Realtek AC97 Audio device, but it is marked with a! and he said:
  Windows successfully loaded the device of this hardware, but driver cannot find the hardware device. (Code 41)

  I'm sure that the device is working because when I try to disable it in Device Manager, I hear a beep warning me that I have her will deactivate.

  Thanks to all in advance

  Recovery to the German bone is not an option :D

  Hello Val

  Please check this document http://support.toshiba-tro.de/tools/Satellite/sm40x/win-xp/install-sm40x-xp-na.zip

  Please install your unit following this statement of facilities. It is very important that all the software components are installed in this order.

  You can also try to remove the block from the Device Manager, and then restart the device.

• Restoring factory MacBook

  I was setting up new mi 1.3 Ghz macbook for the first time and it froze before the end. I stopped it and now when you try to restart, it only shows a circle with a line through it.

  Could someone please offer some advice?

  Thank you very much

  Alberto

  Read more

  What to do before you sell or give away your Mac - Apple Support

  Although it is for the sale of your mac, it describes what is necessary to return the unit to a State of "factory".

• Trigger line asked could not be booked because it is already in use.

  Hi, I am trying to export the markers PFI0 and PXI_Trig0 on NI5450 (in script view)

  by using the following code

  There are no errors when I set up by using the following code.

  commWrapper.ExportSignal (PXICommonGenWrapper.niFgenConstants.MarkerEvent, "Marker1", "PFI0")
  commWrapper.ExportSignal (PXICommonGenWrapper.niFgenConstants.Marker, "Marker0", "PXI_Trig0")

  When I run the script, I get the following error

  Trigger line asked could not be booked because it is already in use.

  Good: Terminal output event marker
  Target unit: PXI1Slot2

  State code:-89126

  Would appreciate any solution that allows me to configure the two triggers/markers. I use these markers to trigger another card PXI (NI5644R on PXI_Trig0) and an external piece of equipment (using the output of PFI0).

  Thank you.

  Hi Surya,

  Thanks for this posting on the community page. It tells you what this error, it cannot route a trigger to your destination requested because something else has already booked this trigger line. A pottential typo, this is your second order ExportSignal specifies niFgenConstants.Marker and not. MarkerEvent. It is a simple error to solve, but there are many possible sources. Is it possible for you to share the complete code with me? Or, perhaps you could arrange a join.me and I can look at your full installer.

• SVJ202A11L screen stay black even after Holding Power button for 15 seconds and then restart

  Need to know why the stay of LCD in black and windows 8 did not come to the top.  But the mouse is alive and can be moved.

  Hi chioulienh,

  It could be windows start in question.  Please go through the following steps to solve the problem.  If this isn't the case, then try to boot in safe mode.  Then using restore windows systems restore to a date on which he was working.  If still does not boot to windows, you contact Sony support at 888-476-6972 for support.  Or can put the unit in a State factory.  Put the new State of the factory will be delete or delete all data and files.  Make sure that data backup before you go as long as the plant.

  Nick-

• My HP P1120w will not activate wireless?

  How can I get my hp P1120w to put on wireless?  When I turn on the printer manually, nothing happens.  If I turned it off and then back up, printing starts.  I have a laptop Dell Inspiron 1525, which uses the Vista operating system.

  I think you mean to have a printer Laserjet P1102w. Corrigez_ me if I'm wrong.

  Also, do you mean that the unit goes into State of no response? It will be turned on, but does not, until you unplug and turn off printer and then back up again?

  Try to update the firmware of the P1102w by running the update located here.

  If the unit continues to be a problem to stay reactive let me know.

• BlackBerry Z3 reset to factory settings

  my phone just 10 days. as it happened, I've implemented everything except for the wifi and data connection wireless internet connection.i tried and worked a few times, he says that it is limited.

  now to the problem. He says that you need to set up the device before 7 days of use. Unfortunately I did not. now I'm stuck in the device setup screen (1st 2 completed configurations). no access to the menu. It is said complete the setup of your device, insert a valid micro sim, or set up a wi - fi network. I hope that the SIM connects but still waiting now for the data connection. in regards to wi - fi, it connects, but said that the device could not connect to internet even though my internet is fine.

  Note: I could have disabled data/data connection services in settings since I was using a SIM on homelessness, while the phone work. This could be the problem or not.

  If I could secure the unit to the State when I bought (without any settings) that would solve the problem. I tried to reset it using link bb, power button for 10 seconds, did not work.

  Help please!

  I have never heard of a "lock of the region. Each instrument is manufactured for a specific set of carriers, the transceiver, necessary to be compatible with this set of carriers only. In addition, each device is locked to a carrier at plant, but which can be unlocked and allow the device to run on any carrier whose radio unit is compatible. Never heard of a lock in the region.

  leo_caveman wrote:

  you will not have bought shopping.

  Always a risk, of course. But if the seller has violated a any of their conditions (for example, deliver something different from what they have announced), then eBay has "Buyer Protection" that you could use. If, however, they delivered exactly what they have announced, and you don't have simply not followed the instructions they had provided, then of course this is not their fault.

  leo_caveman wrote:

  going to try os update bb link and hope this works! your help is always appreciated. thnx

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Be aware of the risks of 10.3.2 however... There are two things to worry about. First of all, be 100% sure that you know your BBID identifiers... If you do not, you may make your useless device to anyone, including yourself. Second, once you move to 10.3.2, you cannot fall back to 10.3.1 or earlier, by any medium (for example, even the unofficial AutoLoaders can not overcome this restriction anti-secours).

  Good luck!

• General Socket error

  I hope someone can help with this. I use a TCP socket client in my application. It works pretty well, but it seems to be about 30 calls on a TCP socket and then up a "General Socket error." This puts the unit in a State that usually requires a restart of the phone before it will resume communication socket. My code is below. Any ideas or suggestions are greatly appreciated.

  OK, I hope that someone can offer a better solution, but after a few tries, here is what is happening. I am struck these calls taken very quickly. Too fast, in fact, the garbage collector release resources appropriately. If I call system.GC() periodically, resources are released as soon as I need them to be. I realize that I should allow the system to take care of garbage collection for me, but my requirements are such that it is not possible. I also realize that Blackberry is not an ideal platform for my needs, but I have to work within the limits that I gave.

  Based on my code, if anyone can provide a better way to deal with this that force the garbage collection, I really appreciate it.

• Are constants of body of the PL/SQL Package in the shared or private area

  Based on that it is not clear to me if body Package PL/SQL constants are stored in the shared or private area.
  
  http://docs.Oracle.com/CD/B28359_01/server.111/b28318/memory.htm
  
  "PL/SQL program units and the Shared Pool
  
  Oracle database treats PL/SQL program units (anonymous blocks, procedures, functions, packages and triggers in database) much the same way he treats the individual SQL statements. Oracle database allocates a shared area to hold the shape analyzed, compiled a program unit. Oracle database allocates a private space to hold values specific to the session who runs the program unit, including local, global and package variables (also known as the package is instantiated) and stamps of SQL execution. If more than one user is running the same program unit, a place unique and shared is used by all users, while each user runs a separate copy of his own private SQL area containing session-specific values.
  
  The individual SQL statements contained in a PL/SQL program unit are processed as described in the previous sections. Despite their origins within a PL/SQL program unit, these SQL statements use a shared area to hold their analysed representations and a private space for each session, who executes the statement. »
  
  
  I am also curious to know what are the differences in fine grain in a perspective of memory and performance (multisession) for the two examples below. One is more effective?
  
  
  Example 1.
  
  create or replace
  package body
  application_util
  as
  
  c_create_metadata constant varchar2 (6000): =...
  
  procedure process_xxx
  (
  )
  as
  Start
  ...
  end process_xxx;
  
  end application_util;
  
  vs.
  
  Example 2.
  
  create or replace
  package body
  application_util
  as
  
  procedure process_xxx
  (
  )
  as
  
  c_create_metadata constant varchar2 (6000): =...
  
  Start
  ...
  end process_xxx;
  
  end application_util;

  881398 wrote:

  But I still have to ask because it seems still more particularly in example 1 that the constant can be attributed to the use that the actual value could be a pointer to a constant string value in a table of symbols or something related to the compilation unit. I'm always curious in a perspective of management of memory if there is a difference between the example 1 and example 2, and if one is better and why.

  The storage is real, references to this storage internal to the PL/SQL engine. And irrelevant to the PL/SQL programmer.

  This question is really a disagreement over the shape is better: example 1 or example 2. I prefer the 1 example, for readability, testability, etc., and so the question is where is the performance of the memory/differences and or is it just preference of developer.

  I agree with rp0428 - he raised a very important point that it is a problem of scope and nothing else.

  Basically is there any trade-off between using one shape on the other insofar as the performance and memory management?

  Not really. Most runtime engines release not just actual system memory when a variable is out of range. the malloc() calls are expensive. Free() calls are expensive (and are not always the result in usable free memory which can be malloc'ed again).

  Several execution engines use what is called a managed heap. A malloc is made of a new process when it is initialized. The heap memory / managed malloc'ed is adjacent. Pointer allocation of memory for this process is initially pointing to the base of the managed heap. As the process allocates / uses memory, the pointer is moved just advance in the managed heap, which indicates the HWM as such - the beginning of the 'free' memory in the heap. Allocation is sequential.

  Reset of your variable execution, or releasing your runtime object, does not reset the HWM as other objects/variables can still be used and located after this place in the bunch. In this case set him free memory by releasing / resetting the language variables does not restore the kernel memory.

  Memory management is a sophisticated process entirely processed by the engine running - and best left to the runtime engine. As you as a programmer do not explicitly control the memory management, it is not a good idea to try to write code that artificially attempt to use 'better' for the runtime engine memory management. The next version of the runtime of that aura of new features, optimizations and so on — and your interference in your code to get the "valorisation" of memory can happen just bite you not bad after an upgrade to execution.

  Regarding the performance aspect - variable initialization is dependent on scope. In order to have a global scope means a one-time initialization, whereas a private scope (created each call) is a multiple unit. If the first is a little faster than the latter.

  However, the performance differences are tiny - IMO too small to justify this as a valid consideration to spend in addition to the decision of functional design on what possibilities a variable or a constant need to have.

  SQL> create or replace package FooLib1 as
    2          procedure Exec;
    3  end;
    4  /
  
  Package created.
  
  SQL>
  SQL> create or replace package body FooLib1 as
    2          const1  constant varchar2(32767) := rpad('-',10000,'-');
    3
    4          procedure Exec is
    5                  var1    varchar2(32767);
    6          begin
    7                  var1 := const1;
    8          end;
    9  end;
   10  /
  
  Package body created.
  
  SQL>
  SQL>
  SQL> create or replace package FooLib2 as
    2          procedure Exec;
    3  end;
    4  /
  
  Package created.
  
  SQL>
  SQL> create or replace package body FooLib2 as
    2          procedure Exec is
    3                  const1  constant varchar2(32767) := rpad('-',10000,'-');
    4                  var1    varchar2(32767);
    5          begin
    6                  var1 := const1;
    7          end;
    8  end;
    9  /
  
  Package body created.
  
  SQL>
  SQL> set timing on
  SQL> exec for i in 1..100000 loop FooLib1.Exec; end loop;
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.28
  SQL> exec for i in 1..100000 loop FooLib2.Exec; end loop;
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.74
  SQL> 
  

  A second difference 0.0000046 in a single execution for FooLib.Exec between the use of package for the constant scope, against increased private. Which means that the issue of the scope is not a decision of the performance. Not when improving performance overhead is 0,0046 millisecs.

• Source of reception AR "AUTOMATIC RECEIPTS"

  Hi all
  
  We ran into a situation with Sources of receipt which has left us speechless. Documentation of claims indicates that the source of reception "AUTOMATIC RECEIPTS" is underway and I believe. Sources of receipt are stored by the ORGANIZATIONAL unit and we have two "RECIPES AUTOMATIC" one for (let's call them) OR X and the other for OR Y. We now create OR Z and that you can't find source of reception "RECIPES AUTOMATIC" for this ORGANIZATIONAL unit, and so States of documentaton claims, we cannot create such a source of reception because the system creates for us. Or at least is supposed to do and has in the past.
  
  We are unable to determine through documentation and research through ar_batch_sources/ar_batch_sources_all object dependencies, which creates sources of receiving 'AUTOMATIC RECEIPTS' seeded. Nobody knows when and how the "AUTOMATIC REVENUE" is created?
  
  Thank you
  Jason

  You ran "Replicate the seed data" for the new ORGANIZATIONAL unit?

• Adding an arrary?

  is it far from adding the unit which gets connected to the Bay as unit4 and contains an instance of unit4 and then if you press again as unit5 with unit5 instance and so forth...

  It comes to my table.

  var unitA:Array = [Unit, unit1, unit2];

  ...............................................................

  unit of var = 0;

  function addunit() {}

  If (cash > = 50) {}

  var unity = attachMovie ("unit", "unit" + units, _level0.getNextHighestDepth (), {_x:100, _y:100});})

  Unit += 1;

  cash-= 140;

  }

  }

  unit_btn.onRelease = addunit;

  .................................................................

  Your old code was wrong... too many things named 'unit' (4 of them, I think, you need 1), so without seeing what you have to change, it is unclear what could be the problem.  But you can try to use...

  unitA.push (this ["unit" + units]);

  What State has changed