Error 1074118650 on niDMM configures waveform Acquisition

Similar Questions

• I can't download ADOBE Flash. The error message can't since Firefox. The other error message is "CANNOT CONFIGURATION of APPLICATION." Any suggestions?

  ADOBE downloaded 12.exe. FLASH will download, but will not be installed. The error message is "cannot CONFIGURE
  APPLICATION»

  Hello, please try with adobe offline installers that are available on https://www.adobe.com/products/flashplayer/distribution3.html (choose the package "Browser Plugin" for firefox).

• Connection of the PXI-4071 - can sound and LOs remain interconnected for the impedance of the cable 2, voltage DC/AC, frequency and waveform acquisition?

  Hello

  We use the DMM and SMU-6363 map to test a hardware device.  We will also use a PXI-2530 b switching matrix.  We will use the digital multimeter to perform the measurements of voltage, DC and AC, measurements of impedance (2-wire and 4-wire), frequency and waveform acquisition.  Can the PXI-4071 left be 4 wire connected (black jacks taken connected and red connected) mode and still be used to perform all other measures (including 2 impedance of the cable).  This would simplify the switch connections.

  Current measures use the son + and LO, but the HI and S-can remain connected.  The problem you are having is if you have an active device the digital multimeter and take you a 4-wire resistance and the measurement of voltage with all 4 wires connected and then change to a current... When you do this, short-circuit you the terminals of the DUT, on that you just take the measurement of the resistance.  If the terminal HAD, say, a power supply 10V, then you have just shorted out.  Of course, this isn't a problem if your Instrument is a passive device, or if you change just the unused two lead whenever there is an active device of low impedance.

  If you want to make voltage, current and 4-wire resistance, you need all 4 wires.  If you want to do the voltage and current, you will need 3 wires, but you could connect the s + Hi and then just do the two wires.  I vote running every 4 son to your DUT for maximum flexibility.

  2-wire resistance is a must if you are measuring resistance above 10 MOhm.  Alternatively, you can use 4-wire for all measures.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• RV180W [IKE] ERROR: did not find configuration for

  I have 1 or 2 of these messages per week.

  Fri Sep 11 15:14:30 2015 (GMT + 0000): [*] [IKE] ERROR: did not find configuration for 85.25.43.94 [60105]

  I have not any clients VPN active so do not know why I get these other than intrusions attempts.

  Hello

  You have tunnels VPN site-to-site configured in the router?

  .:|:.:|:. CISCO | Russ Wyatt | Network engineer | Cisco technical support | [email protected] / * /

• vSAN 5.5 U2 - Flash Cache error reading configuration ' reason: an error occurred during the configuration of the host.

  Hosts: DL360 G6, dual quad core, 64 GB of RAM

  Discs: 3 SAS 10K rpm and 2 SSD Spidles.

  I am trying to set up one of the hosts of Read Cache Flash but I get the desciptive never so much and the defenseless error message...

  "Configuration on disk/vmfs/device/disks/naa. < longguid > has failed. "Reason: an error occurred during the configuration of the host.

  I hope that there is a log file I can verify for a more profound description of this lame error message.

  Can someone tell me where I can check on this error?

  Thank you

  Oh. k. so, it is the function of Read Cache (vFRC) Flash of vSphere and nothing to do with VSAN

  check the diaries which is throwing this error.

  ESP: /var/log/hostd.log and log/var/log/vmkernel of corresponding calendar. This will show what is happening here

  You can check the following

  one.

  Check if SSD LUNS are not used / no other partition

  # partedUtil getptbl/vmfs/devices/drives.

  b.

  Also check that the SSD lun on that host are local and eligible for the vflash

  List of devices # esxcli storage vflash

  Thank you

• The following translators were not loaded due to errors: ASP.htm: has configuration information that is invalid. on Dreamwever 2014.1.1

  I have Dreamweaver 2014.1.1 build 6982

  My computer is an iMac running Yosemite 10.10.3

  Whenever a file is opened, I get the following error message:

  "The following translators were not loaded due to errors: ASP.htm: has configuration information that is invalid.".

  
  

  generally to close this error I have to click on the button OK 3 times

  
  

  Further discussion I tried to rename the configuration file.  This only prevented the application to load completely, so the name was changed back.
  

  This has been resolved.

  'Translators were not loaded' mistakes...

• CMDTUX_CAT:754: ERROR: error parsing of the configuration files

  Hi Tuxedo Experts,
  I have compiled and related sample code Tuxedo client and server (simpapp). According to the README, the next steps is running y tmboot command. It starts smoking simpserv Server? If this is not the case, how can I start that?
  
  In addition, when I ran this 'tmboot-y' command, I get the error:
  ===========================================
  $ tmboot y
  
  tmboot: internal error: CMDTUX_CAT:754: ERROR: error parsing of the configuration files
  
  
  
  tmboot: internal error: CMDTUX_CAT:1360: ERROR: configuration file not found
  ===========================================
  
  Could you please help me with that.
  
  Thank you and best regards,
  Ahsan Asghar

  Hey Ahsan,

  Well, the error message says tmboot cannot find TUXCONFIG. If the TUXCONFIG environment variable has not been set or the tmloadcf command has not completed successfully to create TUXCONFIG. Whenever you login, you will need to run the tux.env file to set all necessary environment variables. If tmloadcf finishes successfully, it should have printed one or more of the error messages.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Error message - the following translators were not loaded due to errors: spry.htm: a configuration

  Can anyone help please.

  When I try to start my DW CS3 on my PC (Win XP) this message appears every time - the following translators were not loaded due to errors: spry.htm: has configuration information that is invalid.

  I am fairly new to this Yes, can you tell me what I need to do something?

  Thank you

  Alex

  See

  Troubleshooting errors in Dreamweaver JavaScript

  http://go.Adobe.com/kb/ts_tn_19105_en-us

  Try steps 4, 6 and 12.

• Number of averages for time waveform acquisition

  Hello

  It is on the configuration of the device - settings of the acquisition.

  in the parameters of the collection file, can I know is there a way to feed the number of averages and % of overlap between averages aquire waving time.

  Thank you!!

  BR

  Pattabi

  In version 3.0 of InsightCM, we will support an average and overlap on the data of the spectrum Viewer.  These settings will be applied only to the visualization of the spectral data and will not apply to calculations on the waveform or spectral data form.

  This will meet your needs?  Or are you interested in doing an average and are superimposed on the spectral data to then be used for calculations that are based on spectral data - such as 1 x Magnitude, etc.. ?

  Thanks for the question.

  -alan

• Error 200220 CRIO 9081 and data acquisition modules

  Hello

  I try to use a CRIO 9081 with NI9206 modules. Max recognize the chassis, but not the module.

  When I try to add an acquisition of data associated with the NI9206 in Veristand, 200220 error message seems.

  I have the solution, finally he was required to add a custom device to search for new engines and detect modules. Then, it is possible to interact with modules.

  Thank you very much for your help!

• tables of fixed size in FPGA compilation error - how to implement a waveform control in an FPGA?

  Hello

  After being stuck for two days, please let me briefly describe my project and the problem:

  I want to use the cRIO FPGA for iterative control of waveforms. I want to capture a full period of the waveform, subtracting a reference waveform period and apply control algorithms on this. Subsequently the new period of correction must be sent again for the output module OR. If it does not work, the captured waveform will look like the one reference after several iterations.

  I am planing to create an array of size fixed for the capture and the reference waveform (each around 2,000 items for a given period). I use so 2 paintings of each elements of 2000. I use the function 'replace the subset of table' to update each element captured in the loop sampling and a feedback for each table node to keep in memory (I also tried shift registers, but then the berries do not have a fixed size any more and I can't start the compilation process).

  If I try to compile the FPGA vi, I get the following error:

  Details:
  ERRORortability:3 - Xilinx this application runs out of memory or met a memory conflict.  Use of current memory is 4167696 KB.  You can try to increase physical or virtual memory of your system.  If you are using a Win32 system, you can increase your application from 2 GB to 3 GB memory using the 3 G switch in your boot.ini file. For more information, please visit Xilinx answer Record #14932. For technical support on this issue, you can open a WebCase with this project attached to http://www.xilinx.com/support.
  "Synthesize - XST" process failed

  Before I added berries to my code I could compile the FPGA without problems. So, it seems that the tables are too big for the FPGA. :-(

  Therefore, I would like to ask if there is perhaps a better method to implement my problem in LabVIEW FPGA? How could avoid the tables to save my waveforms on a period?

  Thanks a lot for your help in advance.

  Best regards

  Andreas

  Unfortunately, the LabVIEW FPGA compiler cannot deduct stores shipped from berries (yet). When you create these two large paintings, you are creating essentially several registers very, very large. Just by looking at your picture, I guess that there are at least 4 copies of each of the tables.

  You want to use LabVIEW FPGA memories instead. You can create memories outside the loop and then read/write them where you are currently referencing the berries. The only change that you really need to do is to break down your treatment in scalar operations. I have attached a simplified version of your plan, I hope it helps. Let us know if you have any other questions.

  

• Error in the SMTP Configurations for File Server Resource Manager

  Hello

  Please help me how to configure SMTP for file server resource manager, when I have set up SMTP for gmail and godady e-mail I got the error.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error on how to configure Outlook Express 6 with Gmail

  For all the,.
  when I try to send a mail to test (from OE) I get the follo wing error message:
  The connection to the server has failed. Account: 'imap.gmail.com', server: 'smtp.gmail.com', Protocol: SMTP, Port: 456, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  Here are my settings under accounts:

  Account
  mail (default) IMAP.gmail.com

  General
  Properties
  Mail account - imap.gmaill.com

  Servers
  Information about the server
  Server IMAP incoming mail server
  Incoming mail (imap) imap.gmail.com
  Outgoing (SMTP) mail SMTP.gmail.com

  Outgoing e-mail server
  My server requires an authentication-"verified".

  Advance

  The Server Port numbers
  Mail (smpt) outgoing 456
  Mail (imap) incoming 993

  Thank you

  The Server Port numbers
  Mail (smpt) outgoing 456
  Mail (imap) incoming 993
   
   
  Try to use port 465.
   
  1: enable POP in your Gmail account:
  http://mail.Google.com/support/bin/answer.py?answer=13273
   
  2: configuration of your e-mail to Gmail client: Outlook Express and Outlook 2002:
  http://mail.Google.com/support/bin/answer.py?answer=13276&topic=1556 
   
  Configure your Outlook Express client to work with Gmail:
  http://mail.Google.com/support/bin/answer.py?answer=76147