universal time is not displayed on the computer of the user executable

Similar Questions

• Contact list that has brought as local is not displayed in the user interface

  Thanks to the Rest API of Eloqua, the contact list is created with scope as 'local' value but in Eloqua IU record is not displayed.

  Note: What scope is Global, then the folder is created successfully via API and also displayed in the user interface

  Maithili Eloqua creates lists with a range of 'local' when you add individual contacts or upload contacts to a segment.  These lists exist locally as part of the segment and should not appear anywhere else in the user interface.  For a list is available in the shared library, it must have a value of scope of the 'Global '.

• Text with LOV input is not displayed in the user interface

  Hello

  I'm new to adf.

  I am creating a LOV Type "Input Text" using Jdev 12 c, but when I run it its only display text of the entry. The Search icon is missing. How can I get that? Check the pictures below

  

  But the page is displayed without the search icon. Check out the image below.

  

  Please help me fix. His Jdev in 12 c.

  (2) I need to make two input visible and invisible text in adf:query based on the choice list value (value dropdown) how I can make?

  It was with the criteria that "CONTAINS" operator With the help of "EQUAL" solved the issue.

• prompt (Functions) are not displayed in the user management responsibility

  Hello
  
  EBS 12.0.3
  
  I added the responsibility of user management with my user application it shows not all prompt (functions) that it is empty, while the sysadmin user's show.
  Kindly answer me.
  
  Thank you

  You have assigned the role of "security administrator" for the user and see if that helps?

  Thank you
  Hussein

• The values are not displayed in the user interface

  Hello.
  
  I use jdev 11.1.1.5
  
  I need to refersh tha table
  
  I had created a TPTrialBal EO with corresponding VO. I had dragged and dropped it as an adf:table
  
  I had also created an adf:button named build., when I click on this button, some values are inserted into the TPTrialBal I need to show the value inserted in the user interface.,.
  How can I do this.,.
  
  could someone help me pls

  After update of data in the table add patialTrigger to the table component.
  You can do it by doing this. In the behavior section property table contains call partial property triggers here you
  adjustable from which component partial triggers this component, you can select your command button.

• HP Pavilion dv6 1335 TX - Mute button is red all the time and not of sound through computer speakers.

  HP Pavilion dv6 1335 TX - Notebook PC (New Zealand)

  MUTE button is red all the time and not of sound through computer speakers. # LED light is 5 according to the guidelines of the manual for the identification of your component externally.

  Processor Intel Core 2 Duo T6600 CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 2 logical processors

  Name of the OS Microsoft Windows 8 Preview version

  Version 6.2.8400 Build 8400

  System Type X 86-based PC

  All drivers works normally and have been checked for updates that were not necessary.

  Turn help would be appreciated

  Hello

  Mute key functionality is provided by IDT Audio software, so the problem may be that Windows 8 has installed a reference driver that does not contain.  Often, the Windows 7 version works Ok, so I would try downloading and installing the following driver IDT.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48830.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Number of unread messages not displayed against the message icon

  Product name: Iphone 5

  Storage capacity: 16 GB

  iOS 9.3.1

  Problem: Number of unread messages not displayed against the message icon. Can someone help me please.

  Already done troubleshooting: "The application of the badge icon" is running in the center of Notifications. Also restarted my phone several times

  Disconnect from the iMessage by settings - Messages - iMessage - OFF

  Disconnect from the iCloud

  Sign up for iPhone

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  Sign back into it

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• When I click on START / all PROGRAMS /, most programs do not display on the screen.

  I had a problem with a virus. Used Microsoft security programs to remove it. However, when I click on START / all PROGRAMS /, most programs do not display on the screen. Any ideas on how to solve this problem?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Create a new user account and check if it helps:
  http://support.Microsoft.com/kb/279783

  It will be useful.

• Recently opened progams are not displayed on the start menu

  Original title: my most recently opened PROGRAMS are not displayed n the Start Menu-Vista ultimate__

  Hello, Im under Vista Ultimate SP2 [32 bit] and what ever updates etc, there is so much current im.  Suddenly the list on the left side of the Start Menu [under the waiting list] shows all the programs that have been recently opened/used. It allows to view, obviously Ive done something along the way but don't can't seem to retrace my steps back far enough. Clicks to memorize and display properties are all not verified so no problem there.  Can someone please help with this annoying problem. May thanks, has soon.

  Type regedit in the start search. Access
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  and delete
  NoStartMenuMFUprogramsList
   
  --
  ..
  --
  "kenhankanen" wrote in message news: c0fac7b4-ec95-4c3b-8345-eb202323410c...
  > Bindu thanks for your reply, but I had tried these steps much earlier on
  > and are the most obvious that can be made. I was expecting something
  > more technical, if necessary, as perhaps a reg key has been changed and can
  > be reset but I am sure that is it might have been, or if in fact it is
  > the cause. I'm sure its base [other Quen exhibited obvious steps]
  [> above], but can't seem to find it in one of the preferences or
  > configuration in the control panel settings. other than furthere ideas
  > create a new user account?
  >
  > Thanks again for your time and help.
  >
   
   

• Microsoft Teredo Tunneling adapter not displayed in the window of adding hardware under common hardware Types.

  I have a HP Pavilion P6 desktop computer running Windows7 and in devices and printers , I noticed that my computer has a yellow triangle that relates to Microsoft Teredo Tunneling adapter.  To address this issue, I note that this device is not displayed in the window of adding hardware under common hardware Types, but I listed it in the Device Manager.

  I tried several attempts to reinstal, but not joy.  Can anyone suggest how I can restore this device?

  In the Properties window, it shows a Code 10.  This device cannot start.

  DM

  Tunneling is required only if you have a printer that requires it.  Here is how to re - install if you do

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.

  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices. If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Built in Flash Video and will NOT display in the hosted environment

  Built in Flash Video and will NOT display in the hosted environment. The files generated: work on the development computer. I posted the same files in the hosted environment and flash are not displayed. I first thought it was Vista 64 IE 7 so I switched to IE7 XP and the same results. Yet, it is strange that the falsh works locally. I'm sure it's something simple I'm missing. Any help would be appreciated. Thank you.
  
  Stan

  What files download you?

• I get emails with pictures and when I send them to others. they open them but the images are not displayed. The photos are there when I send them. Thank you

  I get emails with pictures and when I send them to others. they open
  their place but the images are not displayed. The photos are there when I send a
  them. Thank you

  Make sure that your security software (antivirus) is not blocking attachments.

• I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

  I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

  I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

  I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!