Unlock the USB write protected

Similar Questions

• How to format the USB write protected in windows 7

  Hi I want to format a 8 GB hp pen drive. When I format the USB key, it displays a message that's writing protected.can help you in this problem. Please help me I wait for your answer you.

  Thank you

  Hi Chantal,

  The question is limited to any particular pen driver?

  I suggest trying the steps and check if that helps.

  You can remove from the USB flash drive write protection using the following steps:

  a. open the Start menu, in the search bar typeregedit , then press Efriendship. The Registry Editor opens.

  b. navigate to the following location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

  Note: If theStorageDevicePolicies registry key does not exist, you must create it manually.
  c. highlight the Strategies of storage devicesand then create a new DWORD called (32-bit) aswrite protect.

  d. Double click on the keyrecording in the right window and set the value to 0 inthe value data box , and then press the OK button.

  e. restart the computer and try formatting USB key.

  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Keep us updated on the status of the issue.

• How can I remove a USB write protection

  my USB is write-protected how to remove it?

  Hello

  What operating system do you use?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it.

  Write protection is an element of protection which prevents accidental deletion of important data. Sometimes turning off the write protection is as simple as uncapping the USB key to find a manual switch. If your player lacks an external switch, the procedure requires a few steps to complete.

  (a) turn on your computer and plug the drive after that your operating system is loaded.

  (b) open 'My computer' and the list of readers of research until you find your USB drive letter

  (c) right click on the name, then click 'properties '. Browse the tabs until you see the option to remove the write protection. If this does not work, proceed to the next step.

  (d) visit the website of the company for your USB key. Go to the help or support section and search for "write protect".

  (e) search the Internet for software that will remove the write protection. Download the program and install it on your computer.

  (f) open the software. Follow the instructions to remove your USB write protection.

  I hope this helps.

• Unable to delete files from my flash removable disk, it says to remove the volume write protection

  I am trying to delete music files from my removable flash drive and it is telling that I have to remove the volume DISK USB write protection. I don't know how to do this.

  Original title: write Protection Removal

  Hello

  What is the full error message?

  Method 1:
   
   
  a. open 'my computer '.
   
  b. right-click on the USB drive and select "Properties".
   
  c. uncheck the 'read-only' if it is enabled.

  Note: Click Yes when the pop option ups saying 'apply changes to subfolders and files writable in this folder '.

  d. click on 'apply' and 'Ok '.
   
  e. try to delete the files.
   
   
  Method 2:
   
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows
  

  You can remove your usb flash drive write protection using the method below:

   

  a. open the start menu and select run. On the runline, type regedit and press efriendship. This wil open the Registry Editor.

  b. navigate to the following location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

  Note:

  If StorageDevicePolicies registry key does not exist, you must create it manually.

  c. in the right window, double-click the registration key and set the value to 0 in the value

  Data area, and then press the OK button

  d. restart your computer and try to delete the files from USB flash drives.

   

   

  Method 3: Run a scan for viruses on your computer.
  
  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

   

   

   

  I hope this helps.

• How to cancel on sandisk USB write protect

  How to remove write protect on my thimb drive - sandisk cruzer flash drive switch?

  Hello

  You can remove the SanDisk write Protection by following the steps:
  a. open 'my computer '.

  b. right-click on the drive letter of your flash (usually F: / or G: /) and select "Properties".

  c. click the tab sharing to make it active.

  d. click on 'permissions '.

  e. check the box 'Allow' next to 'total control '.

  If the problem persists while you can contact sandisk for better support.

  Contact us
  
  http://SanDisk.com/about-SanDisk/contact-us?utm_source=contactus&utm_medium=hyperlink&utm_campaign=HomePageTracking

• remove the adapter write protection and usb/microsd card

  Put a micro sd card into the adapter and since I opened it I'm impossible to delete files, format the drive e., Cup etc. When the drive is disconnected Ican manipulate the files which have been locked with the drive connected. The share in the properties of the drive button is untouchable and I tried some tools to format the troubed drive and nothing has worked so far. It affects all my usb ports no matter where I connect the sd adapter. How can I change the access point so E is not write protected?

  There is a little switch on the side of the SD card. Make sure that it is upward, to the terminals.

• How can I remove my USB write protection

  I don't know what is happening, but I was using the command of thumb is now "write protected". How can I change this?

  Follow the steps in the sub site
  http://www.ehow.com/how_4924168_remove-write-protection-USB-drive.html

• I can't remove my USB write protection

  Hello I tried to change the registry, but it does not work

  I can not format
  Usb is not a write protection switch
  I tried in Windows XP, Windows 7 and Windows 8
  I hope you could help me, I need a lot remove write protection

  Hello

  1. What is the brand and model of the USB?
  2. what happens when you try to remove the write protection?
  3. are you an error message or error code?

  I would suggest trying the following steps and check if it helps.

  Note: Before formatting the USB driver, I would recommend you to back your files from the USB driver.

  (a) stop your computer or laptop.
  (b) Insert the USB into your laptop or computer
  (c) turn on laptop and then start immediately by pressing the key (F8) then the Advanced Boot Options screen will go up
  (d) select Mode safe mode with command prompt
  (e) after loading files if your USB Memory Stick drive letter for example is (G) then write it as
  (f) C:\windows\system32>G: and press enter
  (g) G: G:\>format and press enter
  (h) if ask you (O/N) then press on (Y) and press enter
  (i) now a full format will begin that remove USB Memory Stick write-protection.

  Note:

  Before you remove your Computer, always remove safely by going to my computer, then right click on USB and click on eject.

• Fix the Flashdisk write protected

  Please, how do I fix my Kingston D101, 8 GB (= 0011 VID, PID = 7788), it is necessary to format but protected write (before he write protected my flashdisk was attacked by one / or several viruses and I clean it with antivirus SMADAV.) I don't know what is the virus but its been a lot of strange folder)? I try Fc Mptool but I don't understand how to use it. Thank you. Sorry bad English.

  Hello

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it. Write protection is an element of protection which prevents accidental deletion of important data.

  If you want to remove protection, try the advice given:

  Method 1:
  I suggest you to follow the steps and check if the problem persists.

  a. open 'My computer'.

  b. right-click on the USB key and select'Properties'.

  c. uncheck the 'read-only' if it is enabled.

  Note: Click Yes when the option appears saying 'apply changes to subfolders and files writable in this folder '.

  d. click on 'apply' and 'Ok '.

  e. try to delete the files.

  Method 2: I also suggest you follow the steps to edit the registry to disable the write-protected error and check if the problem persists.

  You can remove your usb pendrive write protection using the method below:
  a. open the start menu and select run. On the runline, type regedit and press efriendship. This wil open theRegistry Editor.
  b. navigate to the following location:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  Note:

  If StorageDevicePolicies registry key does not exist, you must create it manually.
  c. in the right window, double-click the registration key and set the value to 0 in the value
  Data area , and then press theOK button
  d. restart your computer and try todeletefiles from USB flash drives.
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  For more information about how to back up and restore the registry, proceed as in the article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps.

• Remove my USB write protection

  Hello

  Today I was transferring a large file to my pen drive which (manufactured is unknown) and in the Middle the procces it says that my USB has the write protection, this is not the first time that I tried to transfer files to the device and before it worked like a charm.

  I tried the normal methods to remove the unit like going in properties, hack rededit method, the method diskstart of the cmd command, the method of formatting, physical locking switch.

  nothing worked, I tried even other pcs and always locked. any ideas?

  Hello
   
  1. is specific to this USB issue special?
  2 have you made any changes to the computer, before the show?
   
  As you have tried different computers and you still face the question, it is quite likely that the USB has some issues and not the operating system.
   
  Method 1:
   
  Run the troubleshooter of material and check.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2:
   
  Run a scan to check on the USB drive.
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  Important: While performing a disk check, if it detects bad sectors and trying to fix it, all the data available in this area may be lost.
   
  If the above is not enough, it is better that get you in touch with the store where you bought the USB for assistance related to this topic.

• How to remove the floppy write protection

  How can I remove write Protection from a disk 1.3 MB

  Sometimes the switch 'cursor' on diskettes 3,5 "bit was removed (to create the disk read-only permanently). If this is the case, then just put a piece of opaque tape over the 'hole' (where the slider switch was)... and you'll be able to write to the diskette.

  If you hold the diskette if you are looking at the rear, the slider switch (or a hole where was the slide switch) is at the bottom RIGHT.

  Please note that the 3.5-inch disks came in various capacities (the two most common are 720 KB and 1.44 MB. If you hold the diskette, then you're looking at the back, then there will be a hole on the bottom LEFT, which is used to indicate the command what is the capacity of the disk. If my memory is good, there will be a hole in the bottom LEFT (when you see the back of the disc), for drives with capacity of 1.44 MB, and if no hole is on bottom LEFT, then the floppy drive is 720 KB.

  My point... If you need to put a piece of opaque tape over the hole where the playback cursor / writing has been (to make writable disk), don't forget to put tape over the hole at the bottom RIGHT (looking at the BACK of the disc... and 'back', I mean the side without label and where can be seen the axis of the disc).

• Interrupt the usb write buffer: how 8 bytes to write string

  Hello! I use USB RAW: interrupt method to read and write data of 8 bytes each time. However, I have a problem writing 8 bytes in the buffer... I want to write in such a way that I have control of all 64 bits (8 bytes) of façade... I tried the method illustrated in the figure below... but my 8 bytes became 8-bit effectively... How can I make 8 group of 8 bits transferred 8 bytes effectively?

  "1100100011000011001111010," Hi

  which is the 3rd step, that you can't do?

  In any case, see weed...

• Remove the disk write protection

  Separated from this thread.

  I need for the SD and USB

  Try here: Remove Protection in writing to a disk (I have not read the thread, this question was separated from so please excuse me it this suggestion has been suggested previously)

• In the box + write protect simultaneous RDM + disabling of the cluster

  I have two node oracle rac cluster running on ESXi 4.1.I have no problem when I run the two node (VMs) oracle on an ESXi server.

  When trying to create a cluster across two esxi server (IE a knot on each server esxi), I see LUNs (RDM) shared on both the nodes (VMs) .but I can set up the database on a single node. In the second node, I have configurable inaccesable to data error. If I set up the database on the second node, I get the error on the first node.

  I don't have the hell the wirte protection one simultanneous my share LUNS are mapped as RDM in physical compatibility mode

  I suspect that the problem may be because of the reason mentioned in the following KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1034165

  It applies to the RDM also?.

  can anyone confirm.

  Hi manic,

  According to http://www.vmware.com/files/pdf/partners/oracle/vmware-oracle-rac-deploy-guide.pdf (Appendix A)

  You must

  (a) use the adapter pvscsi for shared disks and

  (b) define the 'physical' share SCSI bus

  Good luck!

  Andreas

• Edit the CD write protected

  I burned a CD but I would like to make a few changes to the it, and my PC tells me that I can't do.

  In general, you can not do.  Once the CD is finalized - what - no more change.  There are a few ways to burn CDs which can be edited (search "UDF"), but not any software or readers to support this.

  "gobruinz12" wrote in the new message: * e-mail address is removed from the privacy... *

  * I burned a CD but I would like to make a few changes to the it, and my PC tells me that I can't do. *