Similar Questions

• Phone will now connect only via wifi to otherwise the web network does not work

  My Motorola xprt is less than 1 week old. At first, that everything worked well. I got internet connection etc. So I connected to my wifi at home and it worked fine, then my wifi secure at work. but now I can't connect to the internet without wifi. There is no 3G signal activity. I tried to help out with a representatitve of Sprint and after trying to make an update to profile 3 times in vain, he recommended I take it into a store and maybe get a new phone. Prior to this, however I tried to solve the problems of the site via a USB connection with the drivers properly installed (I think) and he was not able to detect my camera. Don't I have some settings wrong? I'm going crazy because I like the phone but can not use wifi all the time.

  In fact the question on the data connection helped because I went to my settings and the title of the data management 'enabled data' has not been verified, now everything is ok - I have my 3G back. It seems that the Sprint guy should have just over my settings rather than suggesting that I might need a new phone. Thanks again.

  I have another question, but I'll start a separate discussion.

• Automatically use the wired on wireless LAN connection when using the docking station

  Hey guys!

  I use the my T500 with the Advanced Mini Dock @TheDude recommended in this thread: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-Recommended-Compatible-Docking-Station...

  I had almost a month now, and whenever I anchor my laptop I have to pass the connection wireless switch off hard or using FN + F5 and extinguish this particular radio.

  Is it possible to have the computer automatically choose the wired connection when it is available, otherwise use the wireless radio?

  I use Windows 7 Prof 64 bit.

  Thank you

  c1p0

  ThinkVantage Access Connections (AC) can be configured to do this. Change your location profile and change the order of the adapter associated with this place, for example, order first as Wired and Wireless second.

  When I am connected Wired and I pull the Ethernet cable, AC will switch to using wireless automatically. When I put the Ethernet back in, it starts automatically by using the wired and wireless don't report limited or no connectivity (which means that the switch has occurred). You will have to perhaps set up wireless in AC power options, i.e. disable radio when not in use (I did not sentence again).

  This could be similar to a docking station solution. Mine is without docking station; When I'm at the office and go to a meeting, I pull the wire and have continuity.

  Ideally, the CA should provide a solution. But it may take some fiddling.

• DeskJet 2540 does not connect when the WiFi is enabled

  When online the printer will print not wireless, when the line of the printer print wireless help... aaaaahhhhhh third one is now...

  Hi paulthechef1,

  Using a connection myfi could absolutely cause these issues.  MyFi isn't a supported type of connection, and its functionality with printers is not a guaranteed connection.  I recommend you to connect to a router or a USB cable.

  Please let me know if you have any other questions.  Thanks for posting on the HP Forums.

• Tried all your suggestions and always receive "Unable to connect" when using ANY search engine.

  Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems.

  In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue.

  Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible).

  Thanks for the comments!

• LaserJet P1102: Stuck on new device is now connected

  Thank you for takeing your time to read this.  I have a problem installing my new LaserJet P1102, the instalation of driver's stuck to new device is connected now... As far as I can see it is a known problem, but cannot find a way to fix it.

  The printer is detected:
  
  

  

  What should I do?

  I have solved the problem, deleted the drivers in the Device Manager and reinstalled windows drivers.

• BlackBerry Smartphones access denied when using WiFi to the web page of my carrier

  Hi, guyz! I have the following situation: I am trying to access my carrier via WiFi web site, using the phone's browser, but I get the error "activate your mobile data. But, if I want to access the same page using the browser Opera, everything is OK.

  Does anyone know if there is a restriction made by the operator or it is something normal to all of the carrier selling services of BIS?

  Therefore, on this basis, I would deduce that your operator has some of the same device control features built into this URL and deny the application for a BB. If you change your BB browser identification (might older browsers, more recent are all automatic) to something else (for example, IE or FireFox), it is possible, you might be able to then cross through the native browser.

  But, once again, of all, as you said, all I can assume is that you carrier has the blocker in place on their websites, blocks access to the browsers of BB. Why they have it is a question that only they can answer. The fact that you reproduced it with another BB only reinforces this conclusion.

  Good luck!

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• How to use wifi when connected to another computer?

  I am currently in a situation where I need screen sharing another mac via ethernet with my thunderbolt, while the Wifi adapter. I have a 2014 the computer I want to see is a new Mac Mini and Macbook Pro screen. When we are connected by ethernet, none of my wifi signal works, even if I am logged in. My computer is looking for internet connection coming from the mac mini, but that is not connected to the internet. As soon as I unplug my shot of lightning/Ethernet, then my wifi starts immediately to the top. In any case to be connected to my wifi, as well as the other computer by ethernet at the same time? Thank you

  Steve

  Your description is disconcerting.

  Do not run cables on the carpet between the computers. Connect all devices to your router or switches that connect to your router, or via Wi - Fi to your router.

  You have a SINGLE network. Some devices can be connected by Ethernet and others by Wi - Fi, but it's the same network.  There is no need to have all devices to use the same media. Ethernet is the fastest connection you can do, so if you have an Ethernet connection, Wi - Fi can be "".

  As long as each device can get on the Internet at the same time without rewiring, you can also do a computer connection to computer whenever you want.

• When connecting to a Wifi hotspot, gives error: device or resource (Server DSN) does not

  Original title: wifi connection problem

  When connecting to a Wifi hotspot, there is problem that is... peripheral or the resource (Server DSN) does not. Help me solve this problem

  Hi Avinash,

  My apologies for the miss.

  In this case, I would recommend contact your college IT helpdesk or you can also post your query in TechNet support.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Satellite Pro C50 "unable to connect" when linking to Netgear WiFi

  WiFi error - could not connect to this network WNAP210 Netgear router.

  Hello

  I have a problem with my computer laptop connection with my router Wifi Netgear router WNAP210 model, when I type the password it says that it is unable to connect or sometimes that the password is incorrect!

  I contacted Netgear, and they suggested changing the name of the router to remove any trait symbols "_" underscore, I made it today but always this annoying message on the cell phone. It does the same thing on my Nokia Lumia 1320!

  I tried deleting found connections and starting from scratch and also changed the name of the router (which displays correctly when you scan for Wifi on the C50).

  Now it starts to get really wound up... Please please help?

  Thank you
  Adam.

  Hello

  You should check the configuration of the WLan router.
  First, you will need to use the same standard WLan (802.11 A/B/G/N) for the wireless network, as well as for the Wlan router.
  In the device-> Waln Manager map properties-> Advanced tab, you can choose the standard Wlan to Wlan card.
  You should also check the settings (WPA/WPA2 AES, TKIP) encryption. Not all standards are supported by each Wlan adapter! So please pay attention to this fact.

  Last but not least, you should also check if these connection problems using various channels (1-11)

• Equium A200 cannot connect to the interest in using Wifi

  Hello

  Since having to reinstall Windows Vista Ultimate Edition, I can't connect to the point of using Wifi. It works very well for Ethernet, but when select the screen "to connect to the Internet", his Blanck and will not find any wifi connects or allow me to connect manually to a.

  In Manager devices under network adapters, it only now shows the Ethernet controller and not the Wifi adapter. I tried to download the driver from this site and after restarting, nothing has changed. I did that the machine has all the latest Windows updates as well. I also mader as the wifi button is lit on the front of the machine.

  As a note I can't find the exact name of the laptop to the system section of the control other than Equum A200 Panel. The driver download page there is NOT an A200 mentions only A300 and A300D.

  NES http://UK.Computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi & action = search & teddProduct = 759 & selShortMod = 667

  Any help would be grateful.

  Spec:

  Windows Vista Ultimate Edition
  Toshiba Satellite A200
  32-bit operating system

  > Also an note aside, I can't seem to find the exact name of the laptop to the system section of the control other than Equum A200 Panel. The driver download page there is NOT an A200 mentions only A300 and A300D.

  I guess you didn't look in the Archive the A200 is a little older, so that the drivers are placed in the Archives!

  If you want to know which driver you are interested in, then I recommend you this faq:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  All Wlan drivers can be found here:
  http://APS2.toshiba-tro.de/WLAN/

• How can I connect using wifi?

  I can't connect to an extract using wifi.

  The first thing to check is to see if the preview work if you connect your iPhone/iPad to your computer via a USB cable.  If USB does not work, but you still want to use wifi, then here are some things to check.

  For wifi, here are a few suggestions:

  1. Make sure that you have installed Photoshop CC 2015 updates, as have been some improvements in wifi connection.
  2. Make sure that you have signed in the creative cloud by using the same user account in the creative cloud desktop application and the iOS Preview app. To verify which user account is used on your computer, launch Photoshop CC 2015 > open the menu help > and confirm that you see your Adobe ID listed next to "logout".
  3. So that your device to appear in the device Preview Panel in Photoshop, the iOS app preview must be open and you must be logged in. Believe you that your device is listed in the overview of the unit Panel? You see the preview with instructions telling icon to launch the application and connect via USB or wifi?
  4. Make sure that your computer and your iOS device are on the same wi - fi network.  The overview of the unit Panel now displays a warning icon and a link to troubleshooting if there is a problem connecting via wifi to the computer running Photoshop for the device that is running the iOS Preview CC app.
  5. WiFi connections can now be initiated using the button "Check for Devices ' in the overview of the device Panel. If you have already connected devices, you will see a refresh button in the Panel that allows you to check for new wifi devices. Preview will automatically check for new wifi devices when you do one of the following: first launch Photoshop (if the Panel is open); Open the control panel; Open a document; or documents. Devices connected via USB are not affected by this change and will be always automatically connect.
  6. Make sure that your computer and your iOS device are on the same wireless subnet.
  7. If you use VPN on your computer or iOS device, try to disconnect from the VPN and then try to connect in the preview.
  8. If you have a firewall running, try to disable it temporarily and see if it is related to the problem.
  9. If you still have difficulty getting a wifi connection works, please send an email to [email protected] and tell us where you have wifi problems. At home? At work? Please let us also know what wifi equipment you use.

• EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and IMessage.

  My iPod touch get now and then next alert message due to change on my iPhone.

  EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.

  Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.

  What is my apple ID used on other devices with the same name as my iPhone?

  I would be happy if anyone has an explanation of why I feel this strange behavior.

  When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.

  You said "by reason of change on my iPhone"

  What has changed on the iPhone?

• IPhone does not connect to the WIFI in the House when not near router

  This is a recent as problem it used to work fine.

  My iphone connects to the WIFI in my house when I'm in the same room as the router but won't connect to nowhere elsewhere in the House.

  Any other apple device I have works fine, so this would suggest that there is a problem with the phone?

  Is it possible to fix this?

  Thank you

  If your iPhone is in a case, first thing I would try is to remove the case and see if that fixes it.  Other that that, I can't imagine any easy fixes.  This article may help:

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  My next step would be to take it to a nearby Apple store and see if they can diagnose and help you.