Unpack the cluster data channels

Similar Questions

• remove the Cluster data store data store

  I have an infrastructure with vCenter and ESXi 4 5.5 I have a data cluster store in SAN with 8 Mon, I need to remove 3 Lun (to be used for other purposes) what is the appropriate procedure

  to remove the Lun (end then to destroy)? Thank you

  Do you want the LUN to use for purpose of non-vSphere? If so, you can just storage vMotion virtual machines since associated LUN data warehouses that you want to decommission (or simply putting the data store in maintenance mode, in this way, that the virtual machines will automatically be migrated). Cleaning after the data store, move the data store from the cluster data store, and then delete the VMware environment data store as described here: best practices: how to properly remove a unit number logic of a host ESX - VMware vSphere Blog - VMware Blogs

• Use the case of the Cluster data without DRS storage store?

  Can someone tell me please the use case of the Cluster data without DRS storage store?

  Virtually no,.

  The only one that is useful is the aggregation of resources of data warehouses in a cluster data store. But it is aggregation of resources in its crudest form. When you create a virtual machine and the use of a cluster as the destination data store, you must always select the data store that will store the virtual machine.

  Storage DRS off =

  No calculation of initial investment

  No space load balancing

  No I/O load balancing

  No rule affinity VMDK

  No maintenance mode

  For this purpose a group of data without active DRS storage store is a kind of a data store folder.

• Add the host Cluster in the Cluster data store

  How can I add host/HostCluster in the Cluster data store after the cluster data store is created. I know that we can add at this time, when you create the cluster data store, but how can we add it as soon as it is created?

  I think that as long as the new host has access to all the LUNS that comprise data warehouses in the cluster data store, then no further action is necessary.

  Make sure just that if using CF then zoning is configured correctly and the LUNS are not hidden from the new host.

  Also, make sure you restart the analysis for new data warehouses on your new host so that it can detect data warehouses

• END of the TNS data channel

  I use IKM:sql command append, LKM: load sql to oracle ORACLE CKM:CKM
  but by exploiting the module in error:
  For action 'table of analytical work' status is "attention".
  warning Msg:
  17002: null: java.sql.SQLException: IO exception: end of TNS data channel
  java.sql.SQLException: IO exception: end of TNS data channel
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
  
  at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:649)
  
  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
  
  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
  
  at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
  
  at com.sunopsis.sql.SnpsQuery.executeUpdate (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.i (e.java)
  
  at com.sunopsis.dwg.cmd.g.y (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  Description:
  BEGIN
  DBMS_STATS. () GATHER_TABLE_STATS
  ownname = > 'ODI ',.
  tabname = > "C$ _0target_table"
  estimate_percent = > DBMS_STATS. AUTO_SAMPLE_SIZE
  );
  END;
  
  
  then
  For action ' create flow table I$ 'status has warned.
  17008: null: java.sql.SQLException: closed connection
  java.sql.SQLException: closed connection
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
  
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:753)
  
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:670)
  
  at com.sunopsis.sql.SnpsQuery.a (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.a (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.updateExecStatement (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.executeUpdate (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.i (e.java)
  
  at com.sunopsis.dwg.cmd.g.y (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  Description:
  create table ODI. I _target_table $
  (
  CALL_TYPE VARCHAR2 (25) NULL,
  MSISDN VARCHAR2 (25) NULL,
  CALL_DATE VARCHAR2 (25) NULL,
  CALL_TIME VARCHAR2 (25) NULL,
  OTHER_NUMBER VARCHAR2 (25) NULL,
  INDICATED VARCHAR2 (25) NULL,
  TERM NUMBER (10) NULL,
  IMEI VARCHAR2 (35) NULL
  )
  
  
  so for the action "insert stream in I$ table" status is RED
  performance:
  17008: null: java.sql.SQLException: closed connection
  java.sql.SQLException: closed connection
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
  
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:753)
  
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:670)
  
  at com.sunopsis.sql.SnpsQuery.a (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.a (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.updateExecStatement (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.executeUpdate (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.i (e.java)
  
  at com.sunopsis.dwg.cmd.g.y (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  
  Insert into ODI. I _target_table $
  (
  CALL_TYPE,
  MSISDN,
  CALL_DATE,
  CALL_TIME,
  OTHER_NUMBER,
  INDICATED,
  DURATION,
  IMEI
  )
  Select
  C1_CALL_TYPE,
  C2_MSISDN,
  C3_CALL_DATE,
  C4_CALL_TIME,
  C5_OTHER_NUMBER,
  C6_CELL_ID,
  C7_DURATION,
  C8_IMEI
  of ODI. C$ _0target_table
  where
  (1 = 1)
  
  How can not solve the problem?

  Hello

  I had not fallen on this error, a little but still try to help you,

  I did some r & D and comes to know his problem with connectivity, although I don't know yet (but I'm sure that's not coz of ODI). :)

  Please take a look the link that can help you, below

  http://forums.Sun.com/thread.jspa?threadID=280338&MessageID=1090056&forumid=48

  http://forums.Sun.com/thread.jspa?threadID=5348347

  I hope this helps.

  Thank you
  G

• Put the data store in the Cluster data store (StoragePod)

  Hello

  Try to a data store in a data cluster store, but the attribute VcDatastore.parent is ready, what is the best way to do this?

  Thanks in advance.

  Try stoargeCluster.moveIntoFolder_Task (arrayOfDatastoresToAdd);

• Script to create virtual machines fails when you try to add the disk to the cluster data store

  Hello

  Attached is the script that I used to create virtual machines and it works very well when virtual machines are created to warehouses of unique data, but do not have clustered data warehouses. I think that the reason is that it creates the virtual machine through the esx host (who does not know the cluter) and not via vCenter (who knows about it). Unfortunately I do not know how to fix.

  Thank you

  Astra

  Looks like he needs a store of data for this parameter object. So we need to do a get Datastore cluster I can try to test tomorrow, but try this:

  If ($datastore1 - only 'none') {}

  $drscluster = get-DatastoreCluster $datastore1

  $vmadddsk = new-disk-hard - VM $gstname CapacityKB - $datastore1size - data $drscluster store

  }

• Error in adding the Cluster data store

  "It was not correct to specified parameters. datastore.info.Type ".

  It is a connected iSCSI Synology. I'm sure this is a setting that I missed, can anyone point me in the right direction?

  With vSphere Client 5.5.0, vCenter Server 5.5.0. All hosts running 5.5 as well.

  Thank you!

  Nevermind, I found it. Different types. NAS vs. VMFS. Sigh.

• Question about the creation of cluster data store

  I'm running vSphere 5.1 and want to enable storage Drs before as I have create the cluster data store, I was reading through VMware vSphere 5.1, but don't see any confirmation when I add data to the cluster storage, the virtual machines using these storage of data is not affected.

  Can anyone confirm that the addition of a data to a data cluster store store has no impact on virtual machines running?

  Thank you.

  Can anyone confirm that the addition of a data to a data cluster store store has no impact on virtual machines running?

  You can add and remove data warehouses in a cluster of data with VMS running store.

• Cannot add the NFS share to store Cluster data

  Hello

  I have this scenario:

  Server - FREENAS with NFS share

  -cluster with 2 guests

  I added the NFS datastore successfully to each host in the cluster. The problem is when I try to add the NFS Datastore for the Cluster data store, I get the error: a specified poarameter was not correct. datastore.info.type.

  Any suggestions would be much appreciated.

  Thank you.

  Datastore1 and datastore2 data warehouses are data warehouses local? If so, you must remove these storages of data added before the NFS datatore to the cluster, first cause a cluster cannot be VMFS and NFS on the same cluster and second cause without making sense have warehouses of local data within a cluster data store.

• DTS moves to the same data store

  Greetings,

  We are short v5.5u1 esxi and vcenter device with DTS clusters installation using thresholds to space only at this time. We do not limit our VM to place records on the same data and store, and in view of the virtual machine can have his records scattered across data warehouses in a cluster of the DS.

  We have many events that seem to do nothing is represented below.  Everyone agrees that something actually happens or vcenter turns his wheels?

  

  Thank you

  Ron

  Just answered my own question... it has to do with my scattered placement of vmdk. Since the vmx file lives on a given data store, the event shows that the activity... However if you check the DTS tab for the cluster data store you will find the disks associated with the virtual machine on other data warehouses were actually moved.

  

• Channel of String conversion to the data channel

  I have a problem I tried to accomplish through a. The URI of the file but can seem to make it work good for me.  I have an original data channel are in TEXT format and the data in the channel are the phone number in the format 6667779999 or 4343. Can someone help me with a suggestion of script to convert this. Most of my ATTEMPTS end with a 66.67779e5.  Can be simple but I can just figure it out.

  Thank you J

  Hello J,

  A number such as 66.6778888e5 can be shown as 6667778888 in a DISPLAY box or table or text REPORT or a axis of REPORT graph by using the display correct format string - in this case "d".  Where do you 6667778888 number appears like this in DIAdem, exactly?  If you want to see in a BULLETIN Board, you will need to choose the option button 'Selected channels' first in the configuration dialog box, and only then will you be able to choose a format string to display such as "d" for this column.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Is it possible to recover the cluster labels in the data of the class?

  Is it possible to recover the cluster labels in the data of the class?

  I'm looking to use the labels of the cluster in the class data to build an insert sql on a mysql database.  I am currently doing this way by using a cluster control, but it becomes big enough and I want to reorganize.

  Thank you

  Zac

  

• [BUG] TestStand 2013 receives corrupt data to LabVIEW adapter if the cluster contains waveform array

  Hi all

  I am having trouble with the corruption of the data. My minimal test case is below.

  I have a VI that returns an array of clusters. My TestStand sequence simply call this VI and connects to its output:

  

  When I run the (with my open VI) .seq file, I can see the update of the Panel before LabVIEW with expected values:

  

  However, TestStand receives all these values. Waveform bays have the correct values, but everything else is empty / null:

  

  If I delete my typedef waveform table, all elements of the cluster are correctly registered by TestStand.

  I've attached an example of test (2013 TestStand, LabVIEW 2013) case.

  Any ideas on how to make it work?

  Hey JKSH,

  Thanks for the detailed on this report. I looked into it a little bit last week.

  I think that it is closely related to the 206892 of CAR, which describes a problem where data will not appear on the report unless a property or variable is specified for the output waveform parameter. However, this does not completely cover your case, because you see incorrect digital data in the row with the waveform of your cluster. I filed 462209 CAR for that matter, and we will investigate it more thoroughly.

  This problem only affects data that appears "below" the waveform in the cluster. In the case of the sample, if you put the waveform as the last element of the bunch, I think that it works correctly. I know that your real data could be more complex than this example, but this workaround solution would help in the meantime? You could also consider separating the waveform of the rest of the data, that would probably work too.

  As I said, please let us know, and it is classified in our system now for a developer to investigate the matter. Please let me know if solutions are not appropriate for your application, we would be happy to know a little more about your overall use case order to work around the problem.

• writing cannot be porformed, because data channels number does not match the number of channels in the task

  Hello

  I'm writing analogues of the buffer to several channels using NOR-6723.

  For some reason any, whenever I go to the buffer double function (1-d) that contains buffers for all channels.

  I always find myself with exception indicating that the numbers of channels in the data are '1 '.

  I use c#:

  Task m_TaskHandle = new Task();
  
  string sChannelsList = "Dev2/ao21:23";
  
  m_TaskHandle.AOChannels.CreateVoltageChannel(
  
  sChannelsList,
  
  "", 0, 5, AOVoltageUnits.Volts );
  
  int iNumberOfSamples = 4;
  
  double dSamplingFrequency = 1000;
  
  m_TaskHandle.Timing.ConfigureSampleClock("",
  
  dSamplingFrequency,
  
  SampleClockActiveEdge.Rising,
  
  SampleQuantityMode.ContinuousSamples,
  
  iNumberOfSamples /* Only relevant if mode is FiniteSamples */);
  
  // Data code is heredouble[] adSampleBuffer;// array values removed from this code snippet (here i have function that generates data)// array size is: num_of_samples * total_channels (in this case 4 * 3)
  
  AnalogSingleChannelWriter ChanWriter = new AnalogSingleChannelWriter(m_TaskHandle.Stream);
  
  ChanWriter.WriteMultiSample(false, adSampleBuffer);
  
  m_TaskHandle.Start();
  

  Not sure I'm I missing, how the MSTDIO determines the "number of data channels", I receive as an exception, it is always equal to 1.

  would appricate to help.

  Thank you.

  Hi idanbis,

  As the snippet you posted, you can create more than one channel using the ao21:23 range. That said, you should use AnalogMultiChannelWriter to configure your write instead of AnalogSingleChannelWriter operation.

  To write using AnalogMultiChannelWriter::WriteMultiSample (boolean, double, you must know the data you want to write must be stored in a 2D array.) Each element in the first dimension of the array corresponds to a channel in the task, while each item in the second dimension, to a sample of write on its channel. For example, that:

  Double [,] data = new double [numChannels, numSamplesPerChannel];

  Then:

  data [0, 0... numSamplesPerChannel]; It is the set of all samples in the first string (ao21 in your code).

  I hope that was helpful. Let me know if I left any doubt remaining.

  Best regards

  Anzurio