Unplug the icon

Similar Questions

• Cannot establish network connection. Messages on the icon alternate between "Acquiring network address" and "unplugged network cable.

  Original title: cannot establish a network connection

  Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?

  Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:

  Diagnosis of IP Configuration
  Invalid IP address
  Info	Zero (0.0.0.0) detected IP address
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: reset the network connection
  action	Disabling the network card
  action	Activation of the card network
  Info	Successfully activated network adapter
  Info	Zero (0.0.0.0) detected IP address
  action	Repair Manual: Reboot modem
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  Info	Redirect the user to support call

  WinSock status
  Info	All base service provider entries are present in the Winsock Catalog.
  Info	Winsock Service providers strings are valid.
  Info	Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
  Info	Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info	Entry provider RSVP UDP Service Provider managed the loopback communication test.
  Info	Entry provider RSVP TCP Service Provider passed the loopback communication test.
  Info	Connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter
  Network location detection
  Info		Using the Internet connection at home
  Identification of network adapter
  Info	Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
  Info

  Ethernet connection selected

  State of the network adapter

  Info

  The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn

  FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  warn

  FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  error

  Could not make an HTTP connection.

  error

  Could not make an HTTPS connection.

  error

  Could not make an FTP connection.

  I found the problem (s), even if I am always left with a few questions.

  During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.

  The solution:

  (1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.

  (2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.

• Monitor does NOT display the icons on Start Up, after the fashion 'sleep', etc.

  I recently bought my computer (last Monday) and the monitor turns on so I can see the wallpaper. However, no icons appear! If I unplug the monitor from the power supply and then plug it back it, is! the icons!

  I wanted to post here before contacting HP, because it can be a quick fix and I can't sit on the phone for who-knows-how-long.

  I have the HP p7-1234 and the monitor model number is HP2011-xi. I have Windows 7. Any help would be appreciated.

  Thank you!

  So... Guess what I learned?

  How many cables you have plugged into your monitor?  All came with a white and blue, and I connected the two.  Apparently, this causes the problem, as the two cables are designed to provide both screens.

  Disconnect the blue wire from the computer and the monitor, and then press the "Windows" key with the letter p at the same time.  Make sure 'computer only' is selected in the pop-up window, and then press ENTER.  This, according to an HP support technician, should fix the problem.

  The instructions should make that more clear that the two cables must not be connected on a single monitor, but it can also be common sense for those who have experience with two monitors.

  I've yet to leave my computer unattended to see if that solves the problem, so let's keep our fingers crossed.

• presentation settings pop-up automatically - disapper of the icons on the desktop!

  I'm having a problem with the icons on the desktop.  Whenever I start my computer, or disconnect or plug when turned on, the desktop icons disappear, and the program of 'presentation settings' will appear.  The desktop icons disappear.  I right click on the desktop, select display and the "show desktop icons" is selected.  I deselect, then right click, display, show the desktop icons to show.  It becomes really annoying!  I do every time I turn on the computer, unplug the unit while it is on or plug it in.  Each time, the 'presentation settings' lights.  When I use the "Mobility Center" to turn off presentation settings, he points out that they are turned off and does not respond when I try to 'works '.  I have the presentation settings icon right click and stop the presentation.

  How can I make this frustrating problem annoyingly go away?

  Thank you Mick but you have totally misunderstood the nature of my problem.  I understand how to transform a computer market properly.

  My point was that, once the computer is turned on, the presentation settings pop-up and the desktop icons disappear.  In order to get them to show, I have to then do a right-click on the desktop, select view - the "show desktop icons" is selected, but the icons are not - so I have to deselect "show desktop icons"; so, I have to repeat the whole process, this time by selecting "Show desktop icons" until the icons will be displayed.  IF I unplug the computer while it is on, the presentation automatically pop settings - up, the desktop icons disappear and I have to repeat the process.  IF the computer is already unplugged and turned on, and I plug it in, presentation pop up settings and the desktop icons disappear, and I have to repeat the process.  He became EXTREMELY frustrating - it's why I screamed for help...

  Anyway, I solved the problem I hope - for some reason any my power settings swiched to profile 'Quiet Office'; When I switched it to the profile "Entertainment", the problem seems to have resolved itself!

• I removed material without using the icon remove and now it has a problem...

  I have a usb external drive that I use for back ups etc, it worked fine on my laptop to start, but now it is recognized by windows but I can't access it, it just continues to display the message "you can safely remove the hardware" and the icon. I know I deleted and it is plugged at least 4 or 5 times without clicking the icon ooops remove, I guess this begs the question, suggestions on how to make it accessible again please?

  Hello Steve,.

  Thanks for posting your query in Microsoft Community Forum.

  1. Do you have an error message when you connect the device? If YES, what is the exact and complete error message?
  2. What is brand and model your external hard drive?
  The issue may be with the USB port or USB support. To verify that I want to suggest the following steps:

  Method 1:

  Try to run the next FixIt and check if the problem persists.

  How to run the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Method 2:

  If the USB device is not recognized, you can give a try to the procedure described in the following article:
  USB device not recognized
  http://support.Microsoft.com/kb/2654149/en-us

  Method 3:

  Show hidden devices then remove the gray entered in the Device Manager.

  1. Unplug your external hard drive.
  2. Go to Start, click all programs and open the Accessories.
  3. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively, click Yes.
  4. In the command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1
  5. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  6. Click on the option to view and select Show hidden devices.
  7. Expand all winks in the Device Manager.
  8. You will notice that several gray entered in the list of open devices. Right-click on each of a device in gray and click Uninstall.
  9. Restart your computer, connect hard drive and check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• What I have to click on remove tools in Win7 before unplugging the ext HDD?

  For XP, I need to select Tools removed before unplugging Ext. HDD,

  I would like to know if I should do the same procedure in Win7 or not, and I can't find any HARD drive on the lower right for deleted option icon.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Yes, you do.

  Its probably a hidden icon (click on the drop down arrow) is the icon safely remove 'usb type '.

• How can I access Siri on my iMac without using the icon?

  How can I access Siri on my iMac without using the icon?  Can I say "Hey Siri"?

  There is no option "Hey Siri" on a Mac because they do not have the necessary pickups. You must use the icon in the menu bar or Dock.

• Slow movement of the icons of file

  I just upgraded to Sierra and discovered that move file icons became very slow. Whether on the desktop or in a window, I can choose an icon of file instantly, but if I try to move, even a small distance, there is a long pause, and I often get the beach ball, until the icon jumps in position. In this case if I move the couple icon of millimeters right through the window.

  The same thing happens if I move a file between windows. There is a long delay, then a 'Preparing [location] move' dialog box is displayed with a process bar. Another long pause, then a quick movement of the bar and the icon jumps to the new location. Even with a copy operation. Moving to and from the trash by clicking and dragging is also slow. File used for the test was 8 k on disk, 699 bytes of content, is not large files. Movement of file in the trash by command + delete soon also. Open the file information dialog box has been the normal speed.

  I also started having very slow save as... dialog box speeds, slow opening and then slow to fill. The beach ball appeared regularly.

  Any ideas?

  Hello, N.W.J. Hazelton.

  Thank you for using communities Support from Apple.  I see your message that you met some slowness during the management of files on your MacBook Pro, since you upgraded to macOS Sierra.  I know that personally, I want to be able to move, copy, and back up things quickly, without a lot of spinning Rainbow cursor to run, so I can see why you've posted.  I'd be happy to help you.

  When my MacBook behaving this way, I found a System Management Controller (SMC) reset helped.  If you are not familiar with how to do this reset, see the following link:
  Reset the management system (SCM) controller on your Mac.

  If you always see the same behavior after this reset, then start in safe mode can tell you if a program or process could be the cause of the delay.  Follow the instructions here and test your functions copy/move while that started in safe mode: macOS Sierra: start in safe mode

  If your MacBook Pro works fine in safe mode, reboot normally and check to see if the problem has been resolved.

  Have a great rest of your week!

• Trails of the icon when switching between desktops in the Sierra

  I noticed some display problems since the update for Sierra. I see some trails icon when switching between desktop computers as well as a line of 1px of random colors on the right side of the screen seems to be leftover pixels for the desktop switch as well.

  Here is a screenshot: https://cl.ly/hegc

  Here is a video showing the paths of the icon: https://cl.ly/hef9

  Any other light this or know how to fix? It's rather annoying.

  Thanks in advance,

  Brent

  Hello Brent Spore.

  Thank you for reaching out to the Community Support from Apple. I know how it is important to keep your Mac running properly, and I want to help him.  Whenever we see the behavior as what you described, it is a good idea to test the symptoms in a separate user in safe mode. This will help us determine if the remanence of the icon is linked to a problem with the user account or if it's a question broad system. The articles below will guide you through these steps.

  How to test a question in another account on your Mac.

  Try safe mode if your Mac does not end commissioning

  If the ghost still occurs in safe mode, then we know it is a question broad system and I would recommend backup your Mac and Mac OS re-install using recovery, as described in the articles below:
  

  Use Time Machine to back up or restore your Mac

  How do I reinstall macOS

  If the behaviour continues or if you encounter difficulties, the entire community is here to help.

  Best regards.

• I can't delete app icons for my new IPhone 7, when I press and hold on the icon it shows if I want to share the app?

  IM cannot delete apps from the iPhone 7 when I press the icon, he asks me if I want to share?

  any ideas?

  You do not press and hold.  You press VERY briefly until the icons wiggle and X in the upper right corner.  You can remove the application.  Not all applications (for example, settings, photo, Messages, pictures, clock) can be deleted.

  Best,

  GDG

• My iPhone 7 won't let me push down on the icons to move them. No matter how hard or how long I push the icon itself just happens.

  MY iPhone 7 won't let me push down on the icons to move them. When I push it down and that you hold, no matter how many seconds the icon itself appears just. Help!

  Push slightly, not difficult.

• Not able to see the icon for the external hard drive on my desktop after upgrade to Sierra

  Dear all,

  I am new to Mac and the OS, I have a Macbook Pro... recently, I upgraded the OS to imed, and since after that, whenever I connect my external DRIVE to Seagate drive in my macbook pro, I don't see the icon on my desktop and as a result, I can't access my files on my HARD drive. However when I check in disk utility, it shows the HARD drive it.

  I could help out me here to ask you to please!

  Kind regards

  Naughty Arlette

  If it's a NTFS formatted disk, then you must update the Paragon NTFS of Seagate driver (available on their support site).

• Change the icons in the Sierra

  Does anyone know how do to change the icons in the Sierra of the old way of cut and paste in the information windows no longer works.

  When I try to copy and paste an icon of a file or folder in the right Info Panel icon. it sticks just a generic icon there.

  But what always works for me, is to open an image in the Preview file and select the part of the image I want to use as icon custom, copy the selection into the clip Panel, then paste it into the icon well of Info Panel to another file or a folder that will change the icon to elements that are not protected by the protection of the integrity of the system.

  But generally, I use iconStix to assign a custom for files and Folders icon.  iconStix has just been updated for Sierra and it is quite easy to combine the icons in the application and assign to files and folders.

  After you have created the icon of iconStix use the command "file > attach Custom Item", then select the item in the file picker.

  

• Having all the icons app pinned to the docking station

  It affect the performance or memory available to other programs if you pin all the application icons in your dock (just for the look)?

  I'm not sure about the memory, but keeping all applications in the dock reduces the execution stack, so it is wise to keep apps in launchpad (you can keep finder and trash in the dock) and also to reduce the size of the icons.

  Thank you!

• How to change the icon of an extra folder in the sidebar?

  I just downloaded Sierra, I have a mac mini and I want to change the icon of a folder that I created, I already changed it, but in the sidebar, there is no icon, so I need help to change to the icon I want.

  If you had already created a folder named & then hung out in the

  Docking station, a change in this file might have to replace one in the Dock; so

  If this is the case, do drag the earlier version of Dock, replace with new.

  Of course, when you drag the icon of the old dock, it will go "poof!"

  {Are you referring to the dock as a 'side bar' on the desktop?}

  Files and web links, etc. can be slid in the side bar (Dock)?

  on the side of the bulkhead the nearest trash. Only applications or utilities

  can be moved to the other side.

  Here is an example of a file with a custom icon to the dock, put in place to

  be considered a list, arranged by name; used to launch additional items that

  otherwise could not fit well on the dock. There are also the Alias of elements:

  

  The alias or the symbiotic relationship that you create in the Dock is always based on the presence

  the original (a custom, etc folder) or on the icon element can become a '? Mark '

  or blank if the original is no longer available. I put the original in my user folder.

  If you already know how to copy a new icon to a folder (else, etc.)

  or make a new graphic icon and paste it into the folder to replace original;

  so if I understand this issue, the rest should be easy.

  Unless you try to accomplish something else...!