Unreadable sectors clearly detected error on MD3000
Greetings!
We have an older MD3000 that recently recovered to a chained disk failure. (first drive went wrong, only relief has taken over and rebuilt, and then the second disc is out.) We recovered from the failure ultimately, in re-creating the disk group.
We didn't have any other readers fail since reconstruction the disk group, and looking at the table through the Manager of storage displays the recreated disk group and virtual disks as optimal. In addition, I also deleted logs (after their record on the server, the table is attached to), but I can't clear this error message from the table. The table itself is out of warranty and should be replaced in the next 30 days. I am looking for assistance in obtaining the disabled state.
Jecooksubether,
You want to do is to enter the SMCli command line and then type the following command. He deletes virtual disks unreadable sectors.
Claire allVirtualDisks unreadableSectors
I would like to know how this happens and if there is anything else I can help you.
Tags: Dell Products
Similar Questions
-
I am trying to create a mechanism of robust communication between a cRIO and a desktop application HMI. I tried to use the network stream I could avoid a lot of pitfalls in the management of a TCP connection. My RT code must be written to operate, and must recover gracefully network disconnections and brutal power loss. I can simulate these things quite effectively pulling the Ethernet cable or hit the button to Abort in LV
My goal of RT has a drive with the endpoint name ' commlink/drive '. My HMI has a burner with the name "commlink/recorder. HMI tries to establish the connection: he gave the Player URL ' / /
If you follow the above, I think that you are 90-95% of the way. As the article you link above mentions, there are additional considerations to take into account if you need to tolerate the application crashes / accidents of remote endpoint. In these scenearios, you basically have one of the three results of the application that always uses the end point which don't collide:
- Demand will start to return errors: In some scenarios, we can detect the remote application is crashed, abnormally terminated, or whatever. In these cases, the read/write will return an error and the same pattern described above should work.
- The flow will introduce a disconnected state and stay offline: This would generally happen with a fall in demand. In these cases, we cannot tell if the connectivity loss is due to a problem with the application or poor network conditions / remote computer. If you need to detect and recover from this scenario, you can do as a section of the link recommend you and write a timer that resets the stream network if the flow remains disconnected for a period of time. This could be incorporated in step 2 of the above state machine quite easily.
- The flow will continue to make a State connected, even if the remote application is no longer functional: This should rarely occur and would occur only when the application on the remote computer hung or an impasse, but the network computer stack is still in operational condition. In this case, we cannot differentiate between a suspended application and the other simply has all the data to send. If you need to detect and recover from this condition, the best thing to do is probably to create a second timer that resets the stream if it's too long you've changed successfully read/written all the data.
I must emphasize scenarios 2 and 3 can be greatly simplified if you care to detecting the crash & block until another application attempts to connect to the application that is still ongoing. For example, restarting the application has crashed/hung will recreate an end point and try to re-establish the connection of flow. At this point, the application which is still running will go account he communicated with endpoint remote must have crashed and raises an error. At this point, the same state machine mentioned above should be sufficient to re-establish the connection. I think that this part could be more difficult in LV 2010 since the first attempt to apply newly restarted it also throw an error when you try to reconnect to the remote application. This will occur until the endpoint in the live application was also destroyed which means that you would have to execute a loop on creating calling until she succeeded. In 2011, we changed the behavior so the call to create the newly restarted application would cause the remote application to start return errors, but now we are still trying to establish the connection on the newly restarted application for up to the timeout limit. If you use a state similar to the above machine, you should be able to reconnect without having to write a loop around the call to Create in the newly restarted application.
-
Greetings!
We have a MD3000i that has been in operation for some time. It is configured with SAS 15 x 750 GB disks, and recently we experienced some failures of drives, including 1 on the 2 discs of relief in the chassis.
Initially, this chassis has been configured with:
-RAID 6 array (called RAID6-1) with 5 discs - slots 0,1,2,3,4
-Table RAID10 (called RAID 10-1) with 4 discs - slots 7,8,9,10
-Table RAID10 (RAID10-2 named) with 4 discs - slots 11,12,13,14
-2 discs labeled as spare - slots 5.6 disks
A few weeks ago, we had a drive failure in RAID 6 Bay. What is interesting is that neither the automatically replaced hot spare disks the drive failed in the RAID 6 array. As a precaution, migrate us all the data out of the matrix RAID 6, deleted the virtual disk and re-created as a RAID 10 array.
This left us with a configuration of:
-Table RAID10 (called RAID 10-1) with 4 discs - slots 7,8,9,10
-Table RAID10 (RAID10-2 named) with 4 discs - slots 11,12,13,14
-Table RAID10 (RAID10-3 named) with 4 discs - slots 1,2,3,4
-2 discs labeled as spare - slots 5.6 disks
location - failed drive - 0
Today, I started to receive warnings about a 10-2 failed RAID array. In this case the hot spare in the slot 5 came as failed and the 2nd disc of alternatives to slot 6 become active to rebuild the 10 failed RAID array.
So now, we look at 3 failed disks in the array
but this isn't really my question... just in general information.
During the process of rebuilding RAID 10-2 I started to receive warnings about the unreadable sectors. A report shows 38 unreadable sectors that have both a failure of logic and physical type. Here's where I'm a bit confused...
The report of unreadable sectors is indicating that unreadable sectors come from a virtual disk that is on the RAID array 10-2. It is the table that rebuilt today. Readers of this table are now - slots 11,12,13,6 (with 6 being the hot spare)
* BUT * the unreadable sector report is indicating that the location of the physical disk is enclosure 0, Slot 7
Storage profile report:
# RAID 10-2
0.14
0.12 [a mirrored pair with the physical disk at the enclosure 0, slot 11]
0.13
0.11 [a mirrored pair with the physical disk at the enclosure 0, slot 12]
0.6 [hot spare physical drive is sparing for disk 0, 14]
0.14
####
So I have a few questions:
1. the report of the sectors is unreadable reports numbers of slots that start at 1 instead of 0. This would make the spare drive which comes in the use of the reader with unreadable sectors
2. the storage profile report does not show a mirror to crack 0.13 this disc has been implemented mirror on the disk in the slot of 0.14 shouldn't 13 and 6 be mirrored between them now?
To be on the safe side, we are migrate all data out of the RAID array 10-2 of the recently created RAID 10-3 matrix. We are also thinking to remove the RAID array 10-2 and making a RAID 1 array, so that we can use the remaining disks under chassis hot spare parts (pending the delivery of replacement of drives we already ordered).
Perspectives or suggestions on this are appreciated.
Thank you!
Gene
After reviewing the support bundle the problem you are dealing with is a puncture of the VD. The minimum thing, I would recommend to resolve this would be to back up data and remove the Group of disks. Replace all failed drives. When it says disc 7 the failed drive is actually HARD 6 disc. Then recreate the VD with the new drives. You will need to then enter and update the firmware on controllers and firmware on the drives.
Now that I fully would you recommend to do is backup all the data of the entire table and reconfigure with a wide range of RAID. Then just break up with virtual disks rather than each has its own RAID level. You will see better performance when you have multiple disks in the disk, rather than having to group that he divided the way it is currently in place.
Please let me know if you have any other questions and I'd be happy to help you.
-
Windows live mail how do I clear the error ID ox80048820
All 'Live' programs have their own forums. The experts he can better help you.
Windows Live Mail Forum
http://www.windowslivehelp.com/forums.aspx?ProductID=15
Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
When I try to download from Microsoft I get a virus detected error erased file
Original title: carnt download anything
When I try to download from Microsoft I get a virus detected error erased file
When I try to download from Microsoft I get a virus detected error erased file
Probably because your computer is infected with a rootkit. See if these steps in removing viruses, marked as the answer, apply to you:
-
clear an error: invalid value "1.0.0.0" request-requires-System. "
Hey everybody. Recently my app had accepted in App World, and now I have to finally move to sign my application. I followed the steps listed HERE, and everything was fine until I actually went to sign my bar... it throws the following error:
clear an error: invalid value "1.0.0.0" request-requires-System. "
I have searched the forums and found this but (which also led to this), I came across another problem. I've been working out of my project of Mobile Flex using the SDK of heroes and everything seemed fine. It debugged very well, installing BAR was very good and above all, it has been accepted by RIM. I thought it was no big thing, but now I run into issues. The discussions I linked to had a response from an official developer of running off of the latest version of the SDK (0.9.3), but my project says that the SDK is not compatible with mobile projects.
Someone at - it suggestions? I hope I don't have to redo something here, but I tell myself that I'll do all what I need to do my application upwards and running as it should. Thanks in advance guys!
Edit: another suggestion was actually go in my manifest file in the META-INF and remove this line of text. I can do this, but I don't know what effect it will have and I suppose you far, far smarter than me. If I try to go and screw with my files, it can't end well.
Haha what do you mean you're not too bright. you really made the right decision here. in the first step of creating a project, you can choose the Flex SDK hero. You cannot choose the BB SDK because it works only as a reference library.
If you go into Preferences > Flash Builder > target platforms, what do you see here?
-
BlackBerry smartphone keyboard does not appear after clearing the error code
I deleted just 'error 102 JVM"my storm and now the keyboard is not displayed. I tried popping the battery while it is on, I also tried to attribute the convenince key to display the virtual keyboard and it does not work.
I forgot to write the file I had to remove from the event log (to clear the error).
Any suggestions?
lol, he likes to go to the doctor and saying "doctor!" I'm hurt! "But I don't remember where!
You have two choices:
Do not forget the name of the file and place the file using this process.
Reinstall your operating system to your BlackBerry.
See the link below to download it, and here is the simple installation instructions.
First find your operator and the system operating file that you want to use.
http://NA.BlackBerry.com/eng/support/downloads/download_sites.jspMake a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.
1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file. -
clear the error messages for form fields
Hello
I use jdeveloper 11.1.1.4.i having the form with the user name and password.
I need to clear the error messages when the password meets the model.
I followed this
http://blogs.Oracle.com/jdevotnharvest/entry/using_javascript_to_clear_validation_error_messages
but this leads to a few other issues.it is clear all page error messages,
but I need to clear the error messages for a component not the adf page.The very purpose of ADFPage has a method
clearMessages public Object clearMessages(String componentId) Clears a messages for a particular component id. If component Id is null then the Global messages are cleared. Parameters: componentId - a componentId or null for global messages
Find out here http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12046/oracle/adf/view/js/base/AdfPage.html#clearMessages_String _
This should allow you to erase the message of an element.Timo
-
hard drive detection error 2100
My W530 just started displaying the error detection, however, Windows can still see the device, as well as the BIOS
Windows it shows the real hard disk model.
However, the BIOS shows as DRIVE.
Does this mean the drive is failing (again), or is the SATA controller?
This is a known bug. for anyone having problems (should probably post in the section windows 10), the problem is caused by the States of power enabling sata driver on the hard drive that does not support the bios.
seems to have been fixed in build 9879
-
How can I clear an error code CANbus (NOR-9853)?
I use successfully the two ports of a NOR-9853 of cRIO backplane 9104, unity a port is disconnected. The disconnected port gives me error 65538 (Op failed) while him remains functionally connected port error 65539 (entry missed 1 or several data points). I can detect the switch using these error codes, but I don't know what are the best measures for:
(1) continue to use the connected port
While
(2) voting the disconnected port to see when it is reconnected
Looks like you have every port IO nodes in the same loop FPGA.
If one node of IO is a failure, he'll at least have a timeout 4 seconds before it fails, and the default time is 14 seconds (configured in the properties). There are two time-outs: one is the output
Timeout, configured by the user in the 'Advanced Options' dialog box of the dialog box properties module and the other is a second timeout 4 fixed in
LV-FPGA pending a response from the CAN module.If the nodes are in the same loop, the disconnected port will block the loop again and again causing the port always connected to sample to a crawl. Try moving them to their own lines.
-
SSD not work / be detected - error Windows installation on laptop HP Dv6-1149wm
Well, well, I tried three different nine ssd: 1 kingston v300 120 GB SSD, 2 840 120 GB ssd samsung, and 3 an another kingston v300 120 GB SSD. Tried in this order.
The Kingston-discs Are not detected by the bios no error or nothing, nada. When it is attached to another computer running windows drives are detected properly. nothing wrong with that.
The Samsung player- It was the second drive I tried. It has been detected by the bios but diagnosis gave me the '303' fast error. When you install windows via USB, it asked me to drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition or format. Not even partition the drive via the command prompt by using diskpart worked. It returns an error indicating an incorrect setting or something like that (Note I could partition the drive here but not format NTFS). I could manually partition on another system completely. Formatting/partitioning via another system has allowed me to completely enter the installation up to the point where it says "installation of features" then it gives me an error saying that it was impossible to define the local system - or something like that. In addition to that I also tried to install windows on the other system that was working fine but would not transfer to the laptop. I also tried the previos on the ssd drive cloning, but when booting the computer gave me a disc read error.
My personal desktop (OCZ Vertex 4 128 GB) drive- it has worked. Diagnosis of computer picked up fine and did not point out the mistakes. The only thing is that I tried to install windows on it because I already had a facility there.
My thoughts– my best guess is that there is a kind of incompatibility with the drives firmware and the BIOS of the computer. The Bios (Insyde h20 F.21) is very limiting in a first time, too easy to use, and not much to do here, second he has not seen an update since 2011. Seems to me that the SSD technology may be advancing faster that HP can follow their updates (this of course assuming it's the BIOS that is at fault)
I am open to suggestions for ideas, basically anything that can help me at this point. I spent many hours on it and I turned empty.
In the end, I ended up putting 4 vertex in there. For some reason, the mobo refuses to recognize the kingston ssd. The samsung, I can't say with certainty because it detected well, but wrong on everything. Must have been a bad disc. It's weird that the manual says it does not accept the ssd because many old machines still accept DSS. Any ways long story short the the kingstons were not compatible, probably faulty samsung, the ozc was the only one that worked perfectly.
-
I have an HP dv6000t. He came with Yuan EC680 ExpressCard analog TV
Tuner. When I upgraded to Vista, the IR receiver seemed to be detected,
but after downgrading to XP MCE 2005. XP MCE 2005 was the ORIGINAL OS
on the system (bought in November 2006). I've updated the drivers for the TWO
the tuner card AND who do not HAVE the nVidia GeForce Go 7400 video card
address this problem. Any suggestion on how to solve this problem would be greatly
appreciated. What HP had try me, including Sofpaq fixes are not
address my problem. It does not give the error "IR hardware not detected".
overnight, it correctly detects the signal from my digital cable box.
The main problem could partly be the we FINALLY converted to digital television
signal and I always try to use the analog tuner ExpressCard? Once again
any help is greatly appreciated.I found this fix on another site. We're supposed to plug the IR cable to the TV box at the back of the first port on the remote sensor Windows Media (the ' antenna' of the Windows Media Center remote control) and then to put the tip of the probe of the IR cable to the cable TV box distance near the sensor on the cable box (it can be seen by a light in the glass) and then complete the configuration of the channels in Windows Media. The problem is, it does not work unless there is also something connected to Port 2 of the medial distance sensor Windows as well (a head set will do). With the sensor box IR cable company cable plugged into the first port in the back of the remote Windows Media sensor and headphones plugged into Port 2 of the remote sensor, Windows Media, and the end of the probe of the sensor cable box IR cable near the cable box remote sensor box, Window Media channel setup "found" the cable of the IR sensor and allow me to complete the installation. I could not bind the Windows Media remote sensor with the remote for the cable box, but said that I managed. I use the remote cable box to change channels and have box IR cable connected on the decoder cable TV and put the cable box IR receiver cable on top of my desk.
-
I have 90% free or empty space on my computer, but my memory is full of error logs.
How can I clear the logs for free my memory and find my speed?
Hello
Thank you for contacting Microsoft Answers.
Too clarify unwanted newspapers, go to my computer-> select your system partition/drive (the partition where Windows is installed usually C:\)->right click for menu doll-> click Properties-> click on disk cleanup.)
After a few seconds, the disk cleanup window opens. Select the categories of files that you want to remove, and then click Ok.
-
Format of paper detected error is not supported on 3210 all-in-One Printer
Msg of error about the size of the paper when opening lid to print a paper copy, an office document that is on 81/2 x 11. Error says 'paper size is not supported has detected", gushes out a blank page and cancels. I went to default settings on a Word document that is located on my desktop and the page is set up correctly to print. Don't know where else to see if the default values have been dirtied with. Help, please.
All, I went to Google again to continue my search for an answer. Found the following of "Red Sonja":
When I saw that so many other people on other forums of media also received this error message, I thought that it would be a solution posted by someone before too long. Assume that nobody could understand it!
The problem has continued and became extremely irritating I went and spent a few hours on the support site of HPs and finally understood what to do, although I never found the exact error that we all received.
Basically the fix is change the paper size setting in the Menu auto copy letter. This by pressing the copy, then #6, select letter (which is #2), and which will bring you to the Menu copy. Scroll through all the selections from 10 until you go to the bottom that is set by default again and select this option.
I tried to make several copies, and it has worked every time now... no error message in view! However, if you try to make copies on paper other than the standard 8.5 x 11, you can select that with each individual work because by default no longer detection "auto."
Thank you Red Sonja, whoever you are!
RNA
-
Printer problem - cannot clear the error and printing
When you try to print something I have on a website, I get an error that tells me to select a printer before I can print. My printer is shown but the error will not clear and I can't print. Everything goes well with the printer, works fine on everything I am trying to print. Any suggestions?
Hello
1 how long have you been faced with this problem?
2 don't you make changes on the computer before this problem?
3. What is the exact error message?
4 What browser do you use?The following article could be useful if you use internet explore.
I can't print or preview before printing a Web page in Internet Explorer
http://support.Microsoft.com/kb/973479
Maybe you are looking for
-
How to make the beep I trash a message now? You know, when spam happens.
Sorry, you do not deserve the beep. I just wish that Thunderbird would STOP send me features I don't want and keep the interface I'm used to.
-
How will I know if I'm connected to my computer laptop and desktop are kept synchronized?
I clicked on help in the menu to see if there is some sort of indication that I am connected, so the laptop and desktop computer are synchronized to the top, but I do not see how to disconnect or "UN-sync '.
-
Photosmart premium 3-in-1: Incompatible print head
I recently changed the black cartridge on the 309 a. When I replaced the cartridge, an error message came "Incompatible print head printhead installed is not intended for this printer or is damaged" I've never had a problem before. I went through the
-
Media player in vista 64-bit won't open after that I used Sothink Movie DVD maker WHY?
I use Sothink Movie DVD maker to burn movies that I downloaded from various sites, mainly from Youtube Christian sites. When I burn dvd Windows media Player 11 does not open and I have to download whole using the Microsoft Fix it Center. I do not u
-
Miten saan password in auki elokuvasta hous on asetettu tarjouskyltin alle salasana
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem mm