Unresponsive script warning: I have read many articles on it and tried in safe mode that doesn't seem to help.

Similar Questions

• Some of my bookmark favicons have disappeared and have been replaced by those that show a blank page. I have read many articles on the problem, but nothing has helped.

  I read many articles about this problem and have found no solution yet. Some of my favicons, which was already good, have disappered. They have been replaced by images of 'white page' where the favocons should be on my favorite Firefox toolbar. Here is a short list of them: the BBC, The Washington Post, HebCal date converter, CapitalOne, FedLoan, US Bank, The Veterans Administartion and Google. I don't recognize a pattern in the types of Web sites and ALL these favicons appear in Internet Explorer and Google Chrome... very strange. This happened more than six months ago. I have read several articles online and tried as much as I can contact here. I picked up some nasty viruses along the way help that hurts and caused enough grief that I really don't need the hunting. So I ask you all to Firefox to help, please. Thank you.

  You can check these prefs on the topic: config page to make sure that they are always default.

  • Browser.chrome.favicons
  • Browser.chrome.site_icons

  You can open the topic: config page via the address bar. You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• I have read the article of Signatures and successfully applied, but it only works on new messages, not sent messages or responses. How can I get it to work on everything?

  I read the article of Signatures in the help files and includes a signature HTML file, and it works fine but only on new messages. Nothing appears for forwarded messages or responses. How can I make it work on all types of outgoing mail?

  Tools-Account Settings - Composition and addressing
  On the middle of the screen

  If the Tools Menu bar does not appear, press the alt key to make it appear.

  You must set this option in each of your accounts, if you have more than one.

• Try a link on a page and the link will not work unless I have disable addons and go in safe mode

  When I connect to a site, there is a tab that I can click on which should take me my FB login. There is no nothing, when I click it, unless I have disable my addons and go to safe mode. I tried to disable addons one by one, but nothing has worked. I can't understand what is causing the problem. I also refreshed my FF from scratch once again and the problem still persists. It's the address I want to... www.Slotomania.com and I try clicking on the blue facebook button in the center of the page. This event started about 5 days ago and I am at my wits end trying to figure out. Can you help me please. Thank you =)
  PS... I didn't add the addons in a time long dang and everything works perfectly.

  Given that you use the private browsing - automatic mode

  Important change preferences
  
  ...
  
  Browser.privatebrowsing.AutoStart: true

  -This may well be caused by the new Tracking protection feature in private windows in Firefox 42.

  When anti-suivi is enabled, a new shield icon should appear on the left end of the address bar. You can use this icon to make a temporary exception to the site. Or you can disable the feature of anti-tracking as a test.

  This article contains more information on where to find this setting in the Options page for private windows: Tracking in private browsing Protection.

• My screen keeps freezing same mouse and I have to close my computer and start in safe mode

  Original title: screen freezing same mouse helps getting more frequent

  Hi all my screen keeps freezing same mouse and I have to close my computer and start in safe mode, I have windows vista. its most frequent doing, I tried to look at the error logs and so on, told it could be my macfee product and another said it was critical error id 400? I'm quite beyond my depth, I did scan virus and his watch not that I have nothing. Please help, I am a real novice so please explain as easy as you can, thank you very much

  Ensure that your data is backed up / copied to external media. It seems that your PC has a hardware problem. If it's a name brand PC, for example Dell / HP etc it may have preinstalled utility test read the manual or manufacturer's web site

  If it's a generic PC, then your machine to HD will have a free test bootable utility, for example SeaTools from Seagate

  To test the memory, www.memtest.org

• Why my screen have a checkered pattern, but when I start in safe MODE it disappears?

  Why my screen have a checkered pattern, but when I start in safe MODE it disappears?

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• I have recently subscribed to Adobe cc and chose a price option that offers access to 10 pictures per month since Adobe Stock. I've never uploaded images, but now I'm trying to download something, and system wonder an awards page. Can anyone help

  I have recently subscribed to Adobe cc and chose a price option that offers access to 10 pictures per month since Adobe Stock. I've never uploaded images, but now I'm trying to download something, and system wonder an awards page. Can anyone help?

  Hello Helena

  When you sign in to stock.adobe.com with your Adobe ID, please make sure that you select the account of the company rather than the personal account and you should see the distribution of your image:

  

  Thank you

  Bev

• My computer is dead, had to get the new computer. Installed PS CS2 and tried to activate it. Cannot call the online help desk, they sent me to you to activate my software. I have the serial number and the last activation number. T

  My computer is dead, had to get the new computer. Installed PS CS2 and tried to activate it. Cannot call the online help desk, they sent me to you to activate my software. I have the serial number and the last activation number. Thank you. Or to intervene in the forum.

  
  

  
  

  [address removed by email.. mod]

  
  

  Hi carlkent,

  Your serial for Photoshop CS2 key would not work as the activation for CS2 servers were closed.

  You must visit this link to download the version CS2 and use the key to series mentioned in this link: https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html

• Hello! I have an Adobe Creative Cloud membership and was under the impression that I was allowed to host 5 free sites through Business Catalyst. However, when I launch my site built in Adobe Muse CC by Business Catalyst he orders to buy a h

  Hello! I have an Adobe Creative Cloud membership and was under the impression that I was allowed to host 5 free sites through Business Catalyst. However, when I launch my site built in Adobe Muse CC by Business Catalyst he ordered to buy a hosting package. Can you please explain what is happening here, and how can I use my free hosting?

  5 free sites ended. It is not available from the CC and more.

• Grainy photos in slideshow PrE 11 when burning on DVD. I have read many topics, but still persists. Help, please.

  Well, the title says pretty much all this. I have a question about the grainy images.

  First of all, let me give a brief introduction on what kind of project we are dealing with here. As I read these forums for hours for the last few days I already have a good understanding of what is important, so more details below.

  Introduction:

  Video editing has started to become a real hobby. I learned to change using Pinnacle studio, but many bugs and flow forced me to try something else. Adobe for me is "the real deal" and only learn to use a program as before by right! So for this project I thought I could give it a go:

  I am changing a video of my uncle's funeral. The funeral was recorded for the grandchildren-yet-to-come. All (except a clip) was filmed using the same device. However, I don't have access to the camera, and I'm not the camera man. When the music was played at the funeral, the camera was rolling, so I added this music me and put a slide show (which aired the same day) in music.

  During the project, I made several quick quality, medium makes it to show my cousin (who dad is deceased) the progress I was making. During these renders, I couldn't note picture quality problems. Also due to the poor quality of course rendering parameters.

  Anyway. When I've finished editing, I was pretty happy with the end result. My cousin agreed so I decided to burn it to a DVD so it could be distributed more to the rest of the family. Engraving impossible at first, but later, after a reboot, everything worked fine. Then, I played a DVD on my TV and discovered that the quality of the images used in slide shows was horrible. I could recognize faces not even, it was that grainy!

  First of all. The "plug":

  Camera: Sony DCR55

  Project settings: PAL > hard drive, memory flash camcorders > Widescreen 48 kHz (I live in a PAL region: Netherlands)

  Disabled: Force project settings selected on this project

  Then the party pictures:

  All JPG pictures

  Yes, on the part of "what I already tried" (and does not, otherwise I would not have been typing this)

  What I tried so far after reading dozens of debates:

  (1) check if the DVD burner was not to blame. So I burned in a folder on my HARD drive. Similar result as what I see on my TV when I burn it to a DVD and read it.

  (2) double-check the project settings. Everything seems OK. Also when I use right click on the clips added to check if the settings are still OK. They are. As for the photos, which surprised me because video clips big screen use non square pixels and pictures of course not. (Thumbs Up for Adobe)

  (3) resize the pictures to the resolution used (720 x 576) before adding them. No improvement, exactly the same thing.

  (4) turn off ' greatness 'framesize. No difference.

  Finally, I want to address the term 'quality '. Below you will find a scale to the bottom of the image at the same resolution as mentioned earlier, compared to a still from the DVD:

  

  Top photo is resized with MS paint. Still seems strong enough.

  The background is a still of the DVD file. Note the 'graining' and the horizontal lines.

  That leaves me with 2 questions:

  (1) what can I do to get rid of bad quality photos

  (2) why did I lose horizontal pixels (as can be seen in the background image)

  If someone could help me, it would be greatly appreciated!

  Joris W

  First the mini test runs before the project of grand...

  My understanding

  a. your original photos are 3264 x 1836 pixels (16:9)

  and

  b. your video is 720 x 576 @ 25 fps interlaced per second, captured from miniDV camcorder

  Focus 1... .the source photos

  Open a new Premiere Elements project, go to the Expert workspace and set the predefined project manually to

  PAL

  DIGITAL SLR

  1080 p

  DSLR 1080p25

  To do this...

  The file menu/new/project and change the settings

  In the settings, set the project preset to the DSLR 1080p25 above as suggested.

  Before leaving this area, the new project dialog box appears. Make sure you have a checkmark next to

  "Forcing the project selected in the project settings.

  When you are in the area of Expert work, please ensure that you are working with a check mark next to Edit Menu/preferences/general "Default scale to frame size".

  Go to add media/files and folders and import your part of

  photos of 3264 x 1836 (not resized).

  Go to publish + share/disc/DVD and burn to the widescreen PAL DVD-VIDEO to DVD disc using the preset

  PAL_Widescreen_Dolby DVD.

  The quality of playback of the disc resulting using your DVD TV Player even, better, worse than before?

  Accent 2... the video (depending on the results of development 1, photos) and will be considered once we see the results

  of development 1.

  RTA

• Thunderbird crashes and I don't have it up long enough to put it in safe mode.

  How do I set safe mode if I have 5 seconds? I have already disabled the suspicious modules, but now the time of collision are still shorter.

  Also, for several months, I couldn't update to thunderbird. Could this be related to the accident?

  Thanks for your help,
  Marina

  Using McAfee anti virus?

  Article http://kb.mozillazine.org/Safe_mode#Mac_OS_X

  Mac OS X

  Hold down the Option key when starting your Mozilla application. (If the Profile Manager opens, select a profile and then hold down the Option key again while clicking on the button to launch Firefox, Thunderbird or SeaMonkey) [5]

  As an alternative method, go to utilities (in the Applications folder) and open Terminal, then run:

  For Thunderbird:

         /Applications/Thunderbird.app/Contents/MacOS/thunderbird-bin -safe-mode
  

  If you have installed the application to another location, modify the path as such. This is the command line parameter "- safe - mode" which is crucial here.

• Since the update of FF 8/9, many Web sites does not, even in safe mode. Any idea what the problem might be?

  All sites worked fine before v8.0 and 9.0. But now many sites (for example, newegg.com & baltimoresun.com) won't load. I hit the button reload several times before that something appears on the screen at all. I tried safe mode - no help. I disabled javascript, which helped some, but does not cure the problem, since even with him off a few sites still never finish loading. I've also disabled IPv6 and DNS Prefetching and emptied the cache, all to nothing does not. He seems to graphics that are not loading. Someone has an idea what is the question? I swear that I'm ready to switch to Chrome or Solaris, if I can't solve this problem. It's incredibly frustrating.

  Well, the problem was caused by the upgrade to v8.0 corrupt something in my profile. Create a new profile loading problem disappear, this is the fix for this particular problem. Significant pain for sure, since the creation of a profile "duplicate" isn't a very elegant process in FF.

  WARNING: If you try this fix, be sure to first make a backup of your current profile. (When I deleted my original profile in the Profile Manager, it also - incredibly - deleted the files that I had copied to my new profile.) Any thoughts on that, dev team?)

• I have a new Apple retina pro, and tried to install a child of 3 years applecare not open on my computer, but it does not recognize the code that accompanies it. any ideas, I live in New Zealand

  I have a new Apple retina pro and I am trying to install a 3 year applecare, unopened. It will not, except the code, any ideas. I live in New Zealand

  It has expired. You can buy guaranteed nine aa.

• IM the administrator of my computer but can't seem to access my account have to use children account, because I have this blue screen, cant even log on to safe mode? How can I solve this problem?

  can't get into my accont blue screen, peuvent ' t do it on safe mode, so I have no administrative privledges, how can I solve this problem? Help

  Hello

  1. What is the exact error message you get with the blue screen?

  Follow these steps and check if the problem persists.

  Step 1:

  Remove all external devices such as printers, USB drives and check if the problem persists.

  Step 2:

  Check if you are able to start in "last known good configuration".

  How to start your computer by using last good known Windows XP Configuration
  http://support.Microsoft.com/kb/307852

• my computer acer have windows vista Home premium and I install Grand update pak2 and remained in safe mod can somebady help me

  my computer acer have windows vista Home premium and I install Grand pak2 and hestay update in safe mod somebady can help me

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner