Unscrew the indesign images text

Similar Questions

• Invoke the hand image + text

  What you set the mimetype when you want to share an image, but also have a text to go with the image. Keeping to "image/jpeg" and just help you add on a text of the query attribute?

  query {
              mimeType: "image/jpeg"
              invokeActionId: "bb.action.SHARE"
              uri: _dirPaths.asset + "images/MissScarlett.png"
          }
  

  This has been asked several times before and it is not possible.

  Previous discussions...

  http://supportforums.BlackBerry.com/T5/native-development/how-to-share-image-and-text-to-Facebook-an...

  http://supportforums.BlackBerry.com/T5/native-development/share-text-and-photo-for-the-same-invocati...

• Replacement of the graphics/images/text with something else?

  Is there an easy way to replace a graphic, video, or text that is already in the timeline panel so that all effects and framing key can be applied by a new element in the same way that it was previously applied?

  This is AE base that everyone should know. If you type footage to replace in the field of research help at the top of the AE will get a step by step. Simply because it's the fourth of July, I will give you here. Select the layer in the timeline panel, you want to replace. In the project Panel, select the new replacement images. Hold down the alt/option key and drag images of replacement in the project Panel to the timeline.

  Because the text layers do not appear in the project Panel, you cannot replace the images with text. You can however put a text layer in the new model and then alt/option drag this new model in the timeline.

• How to unscrew the entire blocks of text?

  Hi all

  (I) reproducing the issue:

  1 - Create a new document with (Master text frame).

  2 - place a file that needs 100 pages for example.

  How to unscrew all of these frames 100 text automatically?

  (II) If you unscrew the two main text blocks, the pages that you insert will be without text frames.

  How to insert pages with no threaded text blocks?

  Thank you.

  It is a script installed in the samples called SplitStory.jsx to break a sory. Don't forget that makes InDesign thinks that each image starts a new paragraph, whether or not break the bgins pause in mid-sentence, and even less to a paragraph. This can cause some strange problems of remelting and indentation according to the styles in use.

  If you unscrew the frames on the master page, you will have two independent test flow paths. Placement and autoflowing a story on the first page will add enough pages the whole story runs only on odd or pairs (depending on where you start) pages.

  You don't need (and many, perhaps more) do not use experienced users, the main text blocks. They end up causing more trouble than they are worth most of the time. Set the margin guides to the desired size, text blocks, and ID uses the guides during automatic placement operations to perform new frameworks.

• Resolution of the image when you place the InDesign file in InDesign

  I feel like this is a silly question but I do not know the answer!

  If I place an InDesign file that contains a picture in a another InDesign, the resolution of the original image file is kept? For example, if I have an InDesign A5 file, that contains a chart where the ppi effective (because it's been reduced) is 600 dpi, and then I place the entire InDesign file it in another file and EXPAND, what happens to my graph?

  Thank you!

  I have a document with an InDesign file linked, an area of text that is used in many documents, so interested in this issue.

  I did a quick test and it seems to work as it should. I made a smaller file with an image linked and bound the Indesign file in a larger document, and since it is a linked InDesign file it recognizes and displays the image in the links Panel.

• InDesign ePUB - can't get the background image to flush vertical css borders

  Hello

  I'm testing my new found skills epub in InDesign CC2015. I'm working on a simple project which was originally for printing (pdf) and decided to make an epub version. I created an external css file where I included the left and right borders for aesthetics. These borders are growing and contracts vertically, depending on the amount of content exists on the page.

  The problem I've come across is if I have a picture as the last asset on the page, the image appears slightly higher than the lower part of the border (see screen shot on the left). It seems that it is a pixel or two higher. The pixelated graphic is anchored to an empty paragraph with a single non-breaking space character. The text block has no indentations, no space before / after values and auto leading together. Object styles have been created for the frame and a paragraph and graphic style has been made to the text. This happens for any image I load in the page and place it at the bottom.

  In the another screenshot, I have a block of text as the last element, and I get a perfect drop-in appearance at the bottom (turned to the right of the screen).

  I cracked open the epub and seen in Chrome html pages. I launched the F12 tools to see the HTML and css code and margin all values are reset to zero. I can't understand why this only happens for images and no text blocks. Anyone has an idea why this happens?

  

  I recently found the answer to my own question. I indicated that I was with a CSS file external to add some additional styles, mainly for vertical borders. After, I cracked open the ePUB, I opened the page html in Chrome and dug down to find the via F12 tools.  I pointed out the tag and took a glance at the corresponding CSS. There is no margin value so I added a img {margin-bottom:-3px ;} entry and it's the bottom of the image, run ras from the bottom of the border.} Then I went back to my file CSS external to the ePUB and added values. When you export to Adobe Digital Editions, I got the same desired results. The other images in the document may not be visually compromised this either so I think that's a wrap.

  

• Online image are not not under the line of text above it

  I'm laying the pictures in a text box in InDesign and there are times where the image I put down this line of text quite where it the image is not overlap any text. And there are other times when the image does not move down enough and he ends up falling on top of text. After some trial and error, I realized that the paragraph style that is attached to the paragraph where sits the image is what affects this behavior. I just can't understand what in this style is causing that. I hope that makes sense. I have attached pictures to explain what is happening.

  In this first picture you can see that the paragraph mark is sitting in the lower corner of the image. The 'faq answer' paragraph style is applied here, and the image is located below the line of text.

  

  In this example, the same paragraph has the "topic" paragraph style applied, end-to-end it image overlaps the text above it.

  

  In the first case that anchored the line spacing of the paragraph with the image has the value auto, in the second, she has a fixed value.

• InDesign CC: Text in editable text fields in the process of disappearance after export

  Hello

  I'm having a problem of text of text editable in endangered fields after you export the document as an interactive pdf. I created the text that should be editable in acrobat with InDesign CC. Thus, for example, I want to have a field editable text that said "I am Marie." I want users to have the ability to change from "Married" to "Tom" or "Ben" in Acrobat. So the pdf should have a form of editable text, saying the phrase "I am Mary" when users open the PDF in Acrobat. However, aafter export, the remains of fields of text, but the text itself "I am Mary." disappeared. I do not understand why this is happening because the text is there when you preview in the Preview SWF window in InDesign.

  Here it is the list of steps in my work.

  
  

  STEP 1: Create some texts (for example, m with the tool text frame in InDesign CC )

  
  

  STEP 2: Click with the right button on the image and click on "Interactive > convert to text field»

  OR

  STEP 2: Select the block of text, open the window "buttons and forms" and change the type as "text field"

  
  

  STEP 3:  Export the document as an interactive pdf. The parameter is set by default.

  
  

  Result: When I open the PDF in Acrobat, the text field is there, but it is empty.

  
  

  Please help me solve this problem. I know this is possible because a person in front of me in my work.

  Thank you!

  As far as I know, to have a form pre-filled text [I am Marie] appear in the text field, you must set the default value of the text field in Acrobat. You can do this by selecting the field property > Options > Default Value

• Text moves to the next image when the space is still ongoing

  Hello

  I came across a situation of confusion while helping my colleague help out a folder that she worked on today. We have found a non-ideal workaround (essentially, reconstruction of the file), but I wanted to know if there was something we have neglected which would have allowed a faster, better the difficulty. In short, the problem was that the text would jump to the next section while he was still in the current space - when the image has been resized slightly, or when an image with jump object wrapping applied was added. (See attached image).

  
  

  
  

  The text is composed of numbers, bullets, and then dashes, each with their own style. It seemed that the culprits were the styles of numbers and dashes (and the body text style on which they were based). I assumed the problem was Options of sequence, that has been enabled for these styles when it usually isn't. However, disable the keep Options in styles does not solve the problem. Even select all text directly and disabling of keep Options as it did not work. I have also excluded from these things, that everything looked normal:

  -Hidden characters

  -Before and after paragraph spacing

  -Align to the baseline

  -Jump training

  -Text block options

  I opened another, running the InDesign file that uses the same styles to use as a basis for comparison; When I copy / pasted a part of the text of the problem file into the right file, erratic jumps framework had disappeared. Similarly, when I copied the reference text in the file problem, she presented the same problem behavior. So there must be something in the style or preference within the document.

  After comparing the styles between the files, however, the only difference between them I could see was keep Options. And (as above) disabling of keep in styles or with all the selected text Options does not solve the problem. (It helped a little with dashes - still jump text, but less lines progressed than before.) Recording, close and then reopen the case did nothing. Later, as I was messing around after the fact just to see if I could find the problem, I completely deleted the relevant styles of the problem file and replaced by their counterparts in the file reference. Problem disappeared. So I finally find a solution preferable to a total rebuild, but the question remains: what else could be different between the two documents so that this error occurs? Is there any other thing in addition to what I have already mentioned? Or is it just something buggy file, styles or apply these styles to the text? Any idea would be appreciated, I would like to know for the future, in case we run into similar problems again.

  Thank you!

  'Keep the options' to Dash sign for 0 to "keep with next". Who takes care of the issue.

• Help on resizing text boxes and the General image techniques

  Using CS2.

  I have two fundamental questions.  We have to do to get the best images to vector (with text) that I can for placement in InDesign documents.  The other relates to the specificity of work with text in FW boxes.

  The easiest way for me to produce vector images has been using PowerPoint.  I do all the graphic work, and then save it as a gif file.  I don't and then cropping in a graphic (Irfanview, PS) tool insert or place the image.  As long as there is no resizing, things work fine.  I do not know how things like IPR are controlled using this technique but I'm assuming that would be also with the graphical tool.  I know that Irfanview allows the CIO to clarify when resizing.

  The problem starts to appear when the gif object is resized.  Things are distorted and I lose the freshness of the image content.  I'm certainly not an expert on the graphics but I thought either, there is no resizing (just a cropping) or 2) to work in a tool such as FW where (I guess) so I need to make 1) actual size charts PP size of the final image placed there are better abilities to resize the vector images.  My feeling (again, not an expert) is that converts the process I use for vector graphics in PP to a bitmap image in the gif and resizing does not work as well for bitmap images with respect to vector objects.  Don't I have that right?

  Go to question 2:

  Can the text boxes be resized in FW without distorting the text?  Their size is visible when initially drasing them?  Maybe spoiled by PowerPoint, I like to define the width of the vector objects (e.g. rectangle) and the width of the text it will fill at the same size.  (I know that PP has the opportunity to put borders on text boxes, but when you work in FW I need to work with 2 objects, the rectangle and the text box).  I have a wide 81px rectangle.  Can I set a text box to 81px wide without distorting the text?

  I tend to want to control the dimensions of the real object so I can get good spacial alignment.  For example, I tend to set the width of a text to an odd number of px object so that any line that comes out of the text object coincide well with the text.  I must admit that it was perhaps time for me to use a different technique in FW (for example an alignment more than objects multiple vs knowing dimensions and locations seting).  My approach does need improvement?

  Thanks for the tips

  Tom

  As I wean out of PP I started watching FW and Illustrator (I have both).  I did a logo or two in FW and have used it to build simple web graphics (e.g. buttons, menus).  It can, I believe, be a little more complicated than what I need in this case.

  Given that the PP is not a graphics program, its drawing capabilities are very limited. As a result, all graphics applications will have many more features that you are used to see and more that you need for a project.

  I did a little experiment with Illustrator and my first impression is that it will work better for me for this job.  It seems a little more intuitive.

  Is a general rule to use FW for graphics for the web and Illustrator of what I was doing in PP?

  Your suggested orientation is good. Also note that if you make a logo or a vector graphic in Illustrator (saved as .ai format), you can import into Fireworks and work with it as a vector object it. FW can import and use, simply create no, files and .ai objects.

  FW has some vector tools, they are hidden under window > others > Path. Because the FW is intended to produce Web graphics, it is a hybrid, capable of vector and image/photo editing application. Given that she has some of both, it is not necessarily what is Illustrator, nor all that Photoshop has. It has most of the features of the two programs, as long as the feature is useful for a Web graphics designer. For pure photo retouching Photoshop has the edge; for pure illustration, Illustrator has the edge. Both Photoshop and Illustrator supports profiles of colors and other important features for printing which is not the fireworks. All are good programs, but there are reasons to prefer one over the other according to the type of graphics, you need to create or work with and what is your intended use of the work. (But none of them will be greater than PowerPoint!)

  I'm not sure I can unravel the mystery with the resizing of text box.  I suspect theres an option is selected.  Knowing that it's possible, it's enough for me to do some homework.

  Maybe... don't think that text boxes at all. You have text objects. The object has a bounding box which is determined by the underlying definition of the police, but he is not in an text box. (Sometimes swooshs goes beyond area of definition of a character in the police, but that's another question). The bounding box of the text object is similar to the of a circle or a star or an irregular shape bounding box. There is a reference to the dimensions box, but the text is not inside some other independent container.

  To resize it, select the text object and change the font size using the Properties palette or using the tool of the ladder hanging out on a corner of the hierarchy (different from the bounding box, and I don't know why, sorry).

  I think that with Illustrator, you can set text (or other) boxes and fill them with text. * Research * Oh... Like these: http://school.tatoland.com/illustrator/aitype.html

  Cheers!

  Lorraine

• Could not find the wrapping of text around an image in Keynote

  I see post of 2007 where you can't wrap text around an image in Keynote. Is this always the case? Hope not... very disappointing if so.

  There is no tool to wrap text in Keynote. Text wrapping is a tool of print media to maximize space in the column in print, if that's what you try to do, use the Apple's Pages.

  Keynote is a presentation of screen based application, (slide show) so there is very little use for the text wrapping.

  You can do a work around, but it is not perfect:

  • Place the image on the slide

  

  • Place the two shapes on the slide, one for the area of text, image size
  • order click on the two forms;     to select both
  • Format > forms > subtract shapes;     will cut a hole in the greatest shape
  • Paste the text into the larger shape

  

  • format text

  

• in InDesign CS6 text appears white when I select the text... :(

  For some time in InDesign CS6 text appears white when I select the text. And remains white when I it deselect.

  It is necessary to another page, higher or lower, to have the text re-appear.

  Mac OS X El Capitan 10.11.6

  InDesign 8.1.0.419

  Make Explorer 5.5

  Adobe fonts

  If anyone has an idea...

  PS Yes:

  -J' cleaned out font caches

  -J' deleted Indesign preferences

  If you mean that the text seems to disappear, then it seems to be a relatively common problem with CS6 in El Capitan.

  I use CS6 with El Capitan and you encounter this problem sometimes. It happens constantly some days and other days not at all, but I've never established exactly what triggers it.

  As Bob says, CS6 is not supported, so it will not be a solution, but if this is the problem that you are experiencing then tap the display between 'Preview' and 'normal' pressing 'w' will fix it - temporarily.

• Export all images with an aspect of the specified image (Adobe indesign)

  Hi all

  Please answer this question

  This is an original Image:

  

  After placing in indesign, I manually do adjustment as below

  

  In my Indesign document , I did like this layout about 30 images. When I make package, in the links folder contain only original image. This editing option manual not exported. But I need the second a (fitting manual image).

  Someone help me please!

  When I make the package in the folder of links contain only the original image

  Rectangle frame in indesign play like mask and no image editing, if you want to change image made it to photoshop, then place it in indesign.

• Is my client using the web browser editor can change the position of text and images, the site was built with muse

  Is my client using the web browser editor can change the position of text and images, the site was built with muse and at first, tell him that he could change the text and images, but he can't change the location of contents of Th.

  Now he wants to paste and copy directly from the web browser Publisher Word and wants to change all of the place itself.

  Does someone have an answer or another solution?

  Philippe

  First of all, to answer your question about moving content. No, that is not supported.

  Then, never advised him to stick to Word what for the web. Word adds a lot of very strange code that can break your page completely. Tell him if he has a Word to add to the site to paste into Notepad or any other text editor, copy and paste to Muse.

• CS5, text on a path in a circle, gets moved around by reducing the whole image in size.

  I, CS5. I created a seal with the graphics and text on a path. Started with an image that was created with an Illustrator old version of CS. text has been updated and the finished product looks good. However, when I try to make a copy and reduce it in size, the text on a circular path gets moved around. Other components of the image decreases as it should. Any ideas?

  Make a copy of the seal in a symbol and allows to reduce the size.