Until the next feature bug; Missing words

Similar Questions

• iOS 9 until the next feature adds duplicates

  Hello everyone.

  I had this problem using music in iOS 9, pretty much since the day 1 that I started using it. What I've noticed, is that when I want to listen to an album, I will push to add the album to the list of the next and what I've been seeing is that, even when I choose clear list for the next current, the album gets added twice to the list. And I don't mean: song1 song1, song2 song2, etc. but I mean it shows as: song1, song2, song3, song1, song2, song3.

  Even if I manually clear the list up next before you add a new album, to confirm that the list is indeed obvious, always double it up. I really don't understand why this is happening. Anyone else seen this happen? Or a solution? Thank you!

  iPhone running iOS 6 9

  Update your iPhone to iOS last 9.3.1 & hope it will solve your problem

• Wait until the next millisecond several question

  I seem to have a problem with the wait until the next millisecond VI. I put it to expect from 1000ms and I inside a loop that makes a bunch of stuff, yet my cards in the loop updates about 50 times every 60 seconds. I thought that maybe, it took too long to run everything in the loop, so he "missed" multiple next MS, but if that were the case it could be updated every 2 seconds. It wouldn't make sense not multiple integer.

  So my code is a great sorta, if he is the obvious places I should look and see, in what concerns, why what is happening in a general sense and not specific to my program, I could try that first.

  Thank you!

  Your loop can go to the next iteration until all structures of the event have expired or been triggered by an event AND wait the 1000ms has elapsed.

  It is difficult to solve the problems, you might want to rearchitect the code a little first. It seems that all the structures of the event are triggerend by the same event. You cannot combine all code into one? Use a structure of single event, not the event structures N!

  Keep the pattern of a single screen. Get rid of all the structures of these unnecessary sequences.

  Eliminate everything that the duplication of code. Why have a huge identical set of nodes of property in each case a case structure? Are not nodes of property after the structure of the case? Write to the properties when the value changes and not with each iteration of the loop.

  Use local variables instead of nodes in value property.

  Can you measure the loop with more conventional means to get a value of exact time loop?

• channel and sampling rate is not updated until the next cycle

  Hi all

  I'm new to LabVIEW and I wrote the code for the measurement of temperature using the cDAQ-9178 or NI 9214. Could someone please look at my code and help me understand why... my names channel to sample and rate update, until the next time I run my program.

  For example: if I enter the name of the channel "ONE" and "10" sampling frequency... and draw my program will be executed using previous information entered by the user. If I press the race a second time, then it will use the '10' sample rate and channel "ONE". Everyone can't see what I did wrong? I know that my code is absent, but she does everything that I need, except for the update.

  I really want to use a structure of the event, but failed miserably in my attempts. Thank you

  Stream.  Updates the values in your Subvi are run in parallel to the Structures of your event.  The simple solution is to simply put your update of the values inside the event.  In this way the controls are not read until you actually press the next button.

• Calculate the number of days remaining until the next anniversary. Help, please!

  Hi guys,.

  I'm new to the forum and to the development of BB. So please do not judge harshly if the answer to my question seems obvious.

  I need to calculate the number of days until the next birthday (taking into account any valid birth date)

  After looking at the API and the forum search, I realized that I could

  calculate the difference between two dates in milliseconds and then divide the delta of the value of a day in milliseconds. That is to say:

  birthdayCalendar.set (Calendar.YEAR, those);

  Date1 = birthdayCalendar.getTime () .getTime ();

  date2 = System.currentTimeMillis ();

  Delta = date1 - date2

  numOfDays = delta\DateTimeUtilities.ONEDAY

  Here's my question. How do I create a valid date1 what about leap years?

  Maybe there's a better way to solve this problem?

  Any help is greatly appreciated.

  I agree that the determination of the number of days between today and Feb. 29 could be a little difficult, if it is not a leap year.  I suspect that the calendar has a certain built-in mechanism to compensate for this, but your solution to choose a date is better.

  DST has a role to play, and Yes, the calendar makes up for it.  Let us take two dates, for example (before DST) March 1 and June 1 (after the DST).  If you take a calendar and set the same hour, minute, etc., they are all the same except for dates, then subtract one from the other, and then divide by the number of milliseconds in 1 hour, you calculate the number of hours between the same time on two different days.  You will find that it is not a multiple of 24 hours - because there is actually an hour less than the number of days since the clocks move forward (in the northern hemisphere anyway...),

  In your case, you are not calculating the number of hours, you calculate the number of days.  But you will be dividing by [24 * (time in an hour)].  If you take [23 * (time in an hour)] and divide it by [24 * (time in an hour)], using arithmetic on integers, you will end up 0.  The easiest to get around this, who also works for the end of the DST too, is to simply add one hour to the date before the division.

  Hope that makes sense...

• Last image remains in display panal until the next frame starts.

  For some reason any every time I cut a clip and follow it with an empty space of the last frame of the clip remains in the panal display, even if the clip is finished. This isn't a problem when I go to the clip, empty space is represented until the next clip begins. It is in audio synchronization for the right frame up a nightmare. Any suggestions?

  Welcome to the forum.

  Rather than leave a gap in the video, what happens if you insert black Video (created with the new icon in the project Panel)?

  Note that deviations may cause all sorts of issues later, while there are not recommended.

  Good luck

  Hunt

• Every hour until the disabled feature

  In the Web of the campaign, then the addition and modification of a segment, there is the option to add members hour segment until the campaign is disabled, or only once during activation. How deactivate and then reactivate a campaign would influence these two options? For example, if you have activated a campaign that had the segment members from all the hours until this campaign has been disabled, would be that reactivate if you re-activated the campaign?

  Hey rlfranco!

  Here are a few clarifications:

  If you add once upon activation and activate Monday to 8, it will shoot everyone in the segment at this time here. If disable you and re-enable it won't have new members, it will draw only ONCE during the FIRST activation.

  If you choose every hour until deactivated, it will check on an hourly basis and pull in the newest member of the segment. If the campaign is disabled, segment operates on his own time table and when re-activated it will be he who is in the segment at the time of the re-activation of the capture and still continue on a base schedule.

  Hope that helps!

• Uninstall SpeedyPc WITHOUT paying. Know that I had to pay until he was in the end not 1 word about fees until the next DAY

  I tried to download something for DAYS now. I clicked on the FREE download SpeedyPc. Nothing! I gave up and went on with the day. Set in motion this morning and a download of Microsoft was ready to install. I thought that's the info I was trying to download. But NO! It turns out that it is SpeedyPc. (FREE)?

  Ran the scan, after the scan it tells you to press the button to fix the problem. At the same time, to save the button appears. So I'll fix it now.  How to register and difficult at the same time?  BUT NO! They want some $$$. WELL!  Here I sit, no way to let them know that they have this back.   (A) not 1 word about $ until it is too late. (B) what is the kind of back door operation DEVIL could be this? I want to give them my c.c. #s?  I don't think so...  (C) now, I have this analysis page and pasted on the computer program.  THAT FIXED!

  Hello

  Uninstall 3.0 Pro SpeedyPC
  http://www.WikiHow.com/uninstall-SpeedyPC-Pro-3.0.0

  Process the sites too hyping registry cleaners and optimizers system like snake oil.
  Those who are more likely to cause problems while fixing anything.

  SpeedyPC reputation on WOT (Web Of Trust)
  http://www.MyWOT.com/en/scorecard/www.SpeedyPC.com

  Also check this thread for more information:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/who-are-speedy-PC-Pro-and-are-they-safe-to-use/62629332-A670-4166-b418-e2a5a876daa1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• wait and wait until the next multiple feature

  If you watch this vi, it's a quite different behaviour; Why is it so? He has to work according to the features

  These two expectations are happening in parallel.  So this image of the sequence will take the most time of the two expected, be 75 msec is exceeded or if he waited up to 10 multiple ms of the timer has been reached.  Of course while it awaits 75 milliseconds, it will have passed 10 msec several time intervals.

  You do not specify an 80 msec multiple of the clock, you specified a 10 msec multiple of the clock...

• The model stop classes Miss words in combination with spelling

  Hello

  I tried the reasons stopclass of Oracle 12 c (12.1.0.1.0 on Windows) to the stoplist filtering based on regular expressions. It seems that corresponding words expressions are not detected as empty words when the base lexer for German spelling is active:

  Assume that the text below (meansing ' height 100 m "):

  'Hoehe 100 m'

  Define a class to stop for distance such as 100 m stations "via:"

  ctx_ddl.add_stopclass ('mystoplist', 'class_1', ' [0-9] + m "")

  So I expect to be able to find the documents containing the text above, when I search with CONTAINS (' mycolumn, ' Hoehe ") but not through CONTAINS(mycolumn, '100m') because this term is blocked by the class of the judgment.

  Normally, this works as expected UNLESS you put on other spelling ctx_ddl.set_attribute ('my_lex', 'alternate_spelling', 'GERMAN'). As soon as the text to be indexed contains a token with a combination of characters

  for which there is an alternative spelling, empty words are detected suddenly no more. In the example above, the alternative for 'Hoehe' would be 'Höhe' (H & ouml; it) and now I find the document via CONTAINS (mycolumn, 100 me).

  
  

  Is this a bug or am I missing something?

  
  

  Thank you

  
  Stefan

  Complete code for re-production:

  Set serveroutput on;

  create the table mytable)

  TextCol varchar2 (200)

  );

  insert into mytable values ('Hoehe 100 m'); -NOK which produces the problem due to the combination of o-e

  insert into mytable values (' height 200 m '); -Do OK no problem with that

  insert into mytable values ('Hohe 300 m'); -OK

  Start

  () ctx_ddl.create_stoplist

  stoplist_name = > 'mystoplist.

  );

  ctx_ddl.add_stopclass ('mystoplist', 'class_1', ' [0-9] + m "");

  end;

  /

  Start

  -Override Default Lexer German

  ctx_ddl.create_preference ('my_lex', 'BASIC_LEXER');

  -If you remove the attribute below, it will solve the problem:

  ctx_ddl.set_attribute ('my_lex', 'alternate_spelling', 'GERMAN');

  end;

  /

  create index myindex on mytable (textcol)

  indexType is ctxsys.context

  parameters ("list of words EMPTY mystoplist

  LEXER my_lex');

  -The following query returns "Hoehe" 100 m. But it shouldn't because "100 m" is a stopword.

  -Note other tokens corresponding to the class of stop (200 m, 300 m) are indeed not find as it should.

  -So this problem should be linked to the function of the alternative spelling.

  Select * from mytable where contains (textcol, 100 m: 200 m: 300 m "") > 0;

  -The following query returns "100 m". We expect no success here is a stopword according to

  -at the stop set the class and stop words should not be in the index.

  Select token_text from dr$ myindex$ I where token_text = '100 M '; -standardize uppercase!

  
  

  This is a bug.  Please do a SR with Oracle's Support to get connected. Or, if you wish, I can connect it as a bug in-house, but this way, it won't be as easy for you to follow.

  Comment on your testcase - it is generally very good (Bravo!), but you can't add comments after the semicolon at the end of the SQL statements and expect it to work in SQL * more.  I imagine that you created the script and then added comments later - just another example of why it is important to cut-and - paste exactly what you have run!

• Clip disappears when you synchronize the audio feature, Bug or am I doing wrong?

  Im trying to sync a bunch of images together and have questions. in general try to synchronize two angles of camera (both with scratch audio) and two stereo audio channels of the lessee of his (total 4 audio tracks)

  
  When I use the function synchronize on first General CC three results.

  1. it works perfectly, and I rejoice!

  2. it does not work as one of the clips is not enough audio info to work with

  3. it works, but any or all video tracks (and audio partner Strath) disappears.

  This video which disappear, it is which I'm bugged by? I'm doing something wrong or is this a bug? If someone else found this?

  generally have tracks like this when you select all (entry incase it is part of the question)

  VIDEO1

  VIDEO2

  Linkedscratchaudio1

  Linkedscratchaudio2

  recordedaudio1

  recordedaudio2

  recordedaudio3

  recordedaudio4

  any help?

  OK, someone change this answer. I see some good info but no solution. Here's how to fix it, and never have a problem. Just select the original audio and video and right click. untie the success. Now select just the audio old and new and synchronize them (make sure that the video is not selected). It works for me when this happens. I hope that helps... Change my friends

• Obtained a credit mistake card, updated my information and nothing happens, he tried not to make a payment, but the error is still there, should I wait until the next Bill to see if credit card information is ok?

  :=

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• I want to re - sample a signal and for the interpolation values remain the same until the next sample...

  See this image for clarification of what I mean:

  http://www.Google.com/imgres?q=sample+and+hold&hl=en&BIW=1680&BiH=867&TBM=isch&tbnid=Gj4_SyS84aLhaM:...

  You can also check this example https://decibel.ni.com/content/docs/DOC-10182 and http://zone.ni.com/devzone/cda/epd/p/id/5874

• Why can I not add music to the next place more?

  This new update *. The feature that I found important on the old update has been removed, the possibility of creating a queue up next. I don't see why you could get rid of this ability. Explanations or something, I see no need to for?

  In addition, the design itself *, on both the app and the office. It was better before.

  You have to touch to add songs to your queue until the next Force the song you want to add to the queue and select play. The song will be added to your queue up next and will play just after the end of the currently playing song. What you can or can not find in the Force Touch menu is the option to play letter which replaced the option Add to the next place on previous versions. Everything you add to the next queue play literally will then play unless you rearrange once on the queue. Some have reported having the option of playing later in some cases, and then it disappears. Me, I've not seen once again. I hope this helps.

• How you sort the list of the next iOS 10?

  I can't know how to sort the list by following in-app music on my iPhone 6 s.  In iOS 9, he had a handle on the right side next to the title of the song that you can tap and drag up/down to change the order of the playlist.  The handle does not appear in the App on iOS 10 music.

  So I guess you can't have activated repeat function.  Once it is off, the handles appear and you can sort your list of songs until the next.