Unusual numbering

Similar Questions

• The channel numbers and the USB-6259 BNC

  The front panel USB-6259 BNC labels BNC connectors as channels 0-7 and 16-23. Most odd... I have a software written in C++ using NOR-DAQmx that my client will try to use with this unit. When using the channel superior numbers he (not unusually, really) Gets the error-200077 saying that they can only be used in unbalanced mode. But it is not natural for him to use the channel numbers printed on the front of the unit.

  Can someone tell me how the front panel of this device is the channel numbers, you must specify in the code?

  This requires the switch (source of the source/grounded) floating FS/GS that appears under each BNC connector?

  Here's my proposal: differential mode: in the software, channels 0-7 are front channels 0-7. Software 8-15 channels are front 16-23.

  Asymmetric mode: software channels 0-7 are cover 0-7 and 16-23 software channels front 16-23. And 8-15 and 24-31 channels are absent...

  It takes just the opposote of what you have. In differential mode, aix is paired with aix + 8. so, ai31, ai9, AL10, ai11, ai12, ai13, ai14, ai15, ai24, ai25, ai26, 27, ai28, ai29.ai30 and ai8 channels are not available for selection in differential mode. Front panel for ai15-23 labels should be correct and matches what you select in the software.

• For some contacts, phone numbers are not displayed

  Hello

  Happy to have the Atrix on gingerbread. It solves my problem of bluetooth. now I walked into something else, and I wonder if you can help...

  1. I noticed that for some contacts who have 4 phone numbers and 2 emails, phone numbers are jamed all together in a single line, rather than a list. no idea how to solve this problem? Moreover, contacts are already subject in my mail to google contacts.

  2. how to add a voice tag to a name/contact? I found my atrix had trouble recognizing a name and always messed with other contacts. So I want to find a way to make it easier for the phone to recognize when I say "Call xxx" (somewhat unusual for some non-English names)...

  I thank very you much for your help in advance.

  The best

  Jason

  
  

• BlackBerry Smartphones stuck in emergency call only and can not enter my password safe alpha that will only allow numbers

  After a software (12 hours) update my Blackberry Curve 9320 is stuck in mode 'emergency calls only '.  I have an alpha security password, so it allows me to enter it will allow of only to try to fix or reconnect to the network - numbers from the keyboard.

  Tried to remove and reinsert the battery - no joy.

  How do I either get my password entered or exit emergency calls only?

  Hello

  Resolved to myself.  Already had a digital security password so I tried to put that in.  It was accepted & seemed to allow the network to reconnect that meant while I was off emergency calls only mode & could enter my password safe alpha & enter my phone.

  Rather strange but suggested that my SIM card can hold my old password that I used with my last phone.

  Unusual scenario but the hope that it might help others.

• Unique automatic numbering, need full page for book counter

  
  I have searched all over the Internet.

  I am trying to add a variable that would make a total number of pages of the complete document... While it is not unusual for a request, the book is not a continuous numbering system.

  For my cover, I need a total number of pages that make up the book. However, each chapter has its own set of numbering.

  For example:

  Cover page - 1

  Table of contents - 2 pages

  When the generation of this chapter page number would be under numbering, using the "first Page #: 1 Format: (xi) novel.

  Chapter A - this has total 10 pages, but the page numbers are a supplement to a previous edition and would be pages 13-23. When the generation of this chapter page number would be under numbering, using the "first Page #: 13 Format: digital.

  Chapter B - has 11 pages total, as above, it would begin on page 40.  Generation of this chapter page numbers would be under numbering, using the "first Page #: Format 40: digital.

  If I add up the total number of pages in this document, it would be total 24 pages.

  I need a way to count each section and add a variable to the coverage that would say something like 'this document contains 24 additional pages for document XYZ' where 24 would be a single variable that would change when more pages are added to the complementary document.

  Find out the number of pages <$lastpagenum>variable. Insert your last page (or use an invisible color specified using your point of view of color) and then refer it to your cover page.

• What defines the numbering of the pages on a bunch of files that are used in several Bookfiles?

  I have a bookfile FM 10 called BookfileA with 20 chapters. In Chapter 1, I put the chapter numbering starts at 1 and the numbering to start at 1. In chapters 2 to 20, I put the chapter numbering and numbering of pages to increment from the previous chapter. So far, so good, but here is the problem. .....

  In BookfileB, Chapter 1 is a different and original file Chapter 1 is transferred to Chapter 2. But the chapter of BookfileB 2 is still automatic reinstatement his chapter and the numbering of pages to 1.

  Unusually BookfileB has an additional chapter, do I have to monkey with the chapter numbering whenever I want to generate a Variant or another? Is there something numbering that I do not?

  Define the numbering and pagination of each file in the file of each book, not in individual files. Book settings take precedence over settings files.

  Refresh/update the books whenever you print, as not sure what common files update last book.

• Unusual behavior with the debugger of the SQL Developer

  Hello everyone,
  
  I've recently updated to Developer SQL 3.2.10.09 and I noticed unusual behavior during debugging. I can't confirm that this behavior started because of the update, but that's just a guess at the moment. I'll explain what's going on...
  
  I have a package and spec (both compiled for debugging) I want to scroll. I make a point to stop where I want to put an end to the execution and everything stops as expected at this time there... or what it looks like. The performance indicator is actually the line after where the process stopped in fact. Here is an example.

  ndxEmpl           PLS_INTEGER := 1;
  ndxNewFac        PLS_INTEGER := 1;
  ndxAdid           PLS_INTEGER := 1;
  ndxStdn           PLS_INTEGER := 1;
  ndxNonComp       PLS_INTEGER := 1;

  Say I put the breakpoint on line 3 of the code above. The execution point watch line three has been highlighted to indicate that it is the next line should be run, but when I mouse over ndxNewFac in both, he line shows its value to null. Then I switch to line 4 and ndxNewFac is now list 1, but ndxAdid is null.
  
  It is really interesting when you arrive if statements or many transport returns in the code, because the execution point will actually bring out a blank line when execution is still a stingray above.
  
  I reinstalled the JDK from my office and used previous versions of SQL Developer all with the same results in the end. I also used the computers of some colleagues on the same package and their debugging behaves normally. I have not tried the debugger on an anonymous block or another package yet, but I thought I'd throw this question here. I will reply with my findings.
  
  Everyone has experienced identical to this behavior? I'll capture some screenshots if the scenario above is not clear.
  
  Published by: gort_industries on Sep 28, 2012 08:28
  
  Published by: gort_industries on Sep 28, 2012 10:44

  There was an old problem where the debug line numbers didn't explain correctly additional "create or replace" added to the top. I thought that this had been fixed some time ago.

• Page numbering question

  Hello forumers.

  Im having trouble get my numbering as the id of the pages.

  Here, in this simple example, I have 5 pages.and im trying to get the page 2 to be where the numbering begins.

  so that means page 2 say 1. so im going to the > numbering and section options.

  I click on the start page number and type in 2. and then click ok.

  but nothing happens.

  But what im trying to achieve ot's, since im a little document.and 5paper I of the 5 pages.

  the cover which is page 1 should not have a page number.

  

  Right click on the first real Page - go options numbering and Section - together Style to something like Roman numerals - say ok

  Right-click on the Page 2 and go to the numbering and Section Options - set to start on page 1.

  Just to note: is very unusual - normally the odd numbered pages are on the right side. So you'll see pages jump so that 1 is now on the right page.

  If you want 1 on the left side, go to Pages panel and uncheck the box in the menu on the left of the Panel - allow the Pages of the Document to Shuffle, and then manually drag Page 1 to the left of the line.

• Numbering pages with words

  Is it possible automated implementation of pagination where the numbers are actually in words instead of numbers?

  For example. "Four" instead of "4"

  Here is a complete, tested Javascript with CS4, but it should work with later versions as well. It works like this:

  1 use the placeholder code "#" in your Master page (s) to indicate where the number of page - like words - should appear. Additional text around him and formatting etc should work just fine; You can even use something like

  It's # page of my first book

  and the script will change the ' # ' the full wording, retaining all formatting you applied (in this case, bold and underlined characters) for just the page number text.

  One based on master pages yet another master page should work (and in fact I so hope you happen to have consumed only because I took care of this special case, as well!).

  2. make sure that master page is applied to the pages in your document where you want the written page number.

  3. the script works with the masters both front and double-sided pages; It will not work with more than two pages per spread! (But it's a pretty unusual scenario).

  4. make sure that the numbering of the pages for these pages is in Roman numerals (1, 2, 3), not something like 'a', 'b', 'c' - the script needs the number to work.

  5. run the Script. It will replace the image placeholder on every page and replace the placeholder with the English text.

  6. If you have moved pages or changed the formatting on the master page, just run the script again and it will update everything. It will update the pages with this particular master page; If you applied another master page does not contain the page number placeholder, this does not alter the framework substituted in these pages!

  7. I wrote the function to convert number to text from scratch. Theoretically, it should be good; and then, in practice, the theory may not work. If you want to than some other formulations ("three-score and five", maybe) let me know & I'll see what I can do.

  8. the numbers as text is returned in all lowercase; by your example, I change the first word uppercase later. However, any other variant is Possible, of course.

  Enjoy!

  (Copy, paste it into a text editor such as the ESTK which comes with InDesign. Save to your user as 'pageNumberWords.jsx' Scripts folder and it should appear in the Panel Scripts. Double click to run, and then check if it worked as expected.)

  //DESCRIPTION:Convert Page Number Placeholder '#' into Text
  // A Jongware Script 11-Dec-2011
  
  var allPages = app.activeDocument.pages;
  for (iterate=0; iterate -1)
                                return masterPage.textFrames[i];
            }
            // Not found? Perhaps on this Master's Master?
            if (master.appliedMaster != null)
                      return findFrameContaining (master.appliedMaster, side, text);
            return null;
  }
  
  // Needed because the very useful label lookup was
  // -- totally unnecessarily! -- removed in CS5+ ...
  function findByLabel (items, label)
  {
            var i;
            for (i=0; i= 1000)
            {
                      thousand = Math.floor(number/1000);
                      result = numberToText (thousand) + " thousand";
                      number = number - 1000*thousand;
                      if (number > 0)
                                result = result + " ";
            }
  
            if (number >= 100)
            {
                      hundred = Math.floor(number/100);
                      result = result + ones[hundred]+" hundred";
                      number = number - 100*hundred;
                      if (number != 0)
                                result = result + " and ";
            }
            if (number >= 20)
            {
                      ten = Math.floor(number/10);
                      result = result + tens[ten];
                      number = number - 10*ten;
                      if (number != 0)
                                result = result + "-";
            }
            if (number != 0)
                      result = result + ones[number];
            return result;
  }
  

• Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

  Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

  Hello

  Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

  Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

  

  21:34 on Friday. 7 October 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• The AppleScript get cell numbers active

  I want to create a script that checks the active cell or column better / assets to the keyboard layout for the automatic switch from English to Korea and visa versa...

  I can't find it anywhere... where to get the active column? Help, please!

  AppleScript to affect the current selection (if the selection is a single cell, an entire column or some other range) is as follows:

  say application "Numbers".

  say front worksheet active document

  say ( class is worn) fromfirst table whose selection range

  say a selection range

  -do things here, for example:

  -the value of background color "red".

  -value of the first cell value v

  end say

  end say

  end say

  end say

  However, from keyboard, I don't know why you should check the specific range in number.  You may want to watch v (value in, say, the first cell) to check if it is in Korean or in another language?

  SG

• Impossible to pass the numbers or iWorks

  somehow, I lost my iMac iWorks.  I reinstalled the original version.  Always impossible to open my files.  I'm trying to upgrade, but nothing happens.

  Hi Mike,.

  What "original version" numbers you have reinstalled? How you don't have reinstall it?

  What version you are trying to upgrade to?

  Kind regards

  Barry

• Numbers 4.0 - Bug with default date when entering the time alone?

  I've just updated to 4.0 numbers after upgrade to Mac OS Sierra and met with what seems to be a bug.

  Previously when I enter a time in the format hh: mm in a cell that has the format of Date and time, it would create the date date of the day, because none has been provided explicitly. It is the behavior expected according to this support article:

  If you do not enter a date and a time, Numbers adds a default value for you. For example, if you type '13:15 ', Numbers adds today's date by default.

  What happens now in numbers 4.0 for me when I get home just a moment, is that it gives me 01/01/2016 as the date, which is a huge pain, because I rely on the fact that the date is (or should be) today's date by default when you enter data in my spreadsheet and right now that means I have to manually change each date by hand to be released today.

  All confirm that this behavior occurs in numbers 4.0 (Build 3507)?

  Thank you

  Michael

  Here is what I get here after typing 13:15 in numbers 4.0 under Sierra:

  

  I left the Format of data in automatic mode, but get the same result when the format Date and time.

  It might have something to do with your region settings in system preferences (I'm using the default values for the United States).

  Have you tried numbers, reboot and try in a document of closing costs?

  SG

• Can I recover my phone numbers of my Iphone 4 from the Cloud

  Can I recover my phone numbers of my Iphone 4 from the Cloud?

  Do you mean your contacts?

  Go to icloud.com and see if your contacts are there.  If so, you can recover.

• Can I do an automatic numbering of paragraphs?

  I find that I can use the automatic numbering if I have elements that do not go on a single line and double line spacing. But if something runs several lines spaced single, I want a space before the order of the day, then that must be a new paragraph, is that correct? In this case, automatic numbering does not work and I have to go at the end, after moving items and fix all issues. So, can automatically numbered paragraphs? Thank you janeos

  Hello Jay,

  Automatic paragraph/list numbering increments and applies the following number when you type a return (paragraph break).

  Two returns by typing in a line is interpreted as a signal to stop the numbering of paragraphs and list.

  ""If something runs several simple lines spaced, so I want a space before the order of the day, then that must be a new paragraph, is that correct?".

  M S

  You can insert an empty line without creating a new paragraph by typing a line break. Press SHIFT + return. Then press return to enter a paragraph break to create (and number) a new paragraph.

  You can also use the text Inspector (Format button, and then text) to set the Pages to add a space before or after (or before and after) each paragraph so numbered or not.

  Kind regards

  Barry