Unwanted guests

Similar Questions

• I was just diversion & just trying to get rid of unwanted guests, I came back to the control panel & it management logo had been changed to a small page 'help '.

  XP, 32, quad, walk, I've just been diverted while trying to get rid of unwanted guests, I came back to the control panel & it management logo had changed it was changed to a page, if that's how describe you you can see I need to learn a little more about computers right! anyway & when you right click it there came a page white, but before, I was trying to get rid of those comments, there were about 5 I know where they come from bittorrent, I had to install more than one week & then I am devoured alive I had to get my tech to reformat, but these things were hidden somewhere? because I found traces of bittorrent on the computer, I give up! Please can someone! help this old man! gazza.

  Hi gazza.

  Scan your computer for malware and try to remove it.

  You can use the Microsoft Safety Scanner to do the same.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Unfortunately, when a system is infected the best way to ensure that everything has been deleted is to perform a clean installation.

• I think an add-on did funny things

  Last week, I noticed changes in the browser. For example, if I typed in "ESPN" in the URL address field, Firefox would automatically fill address based on my background. In other words, if I typed, "banko", Firefox would flood, "routard.com." In addition, the 'drop down' arrow (beside the button refresh) used story actually fall down and show my most visited sites 15-20. Now, it does nothing. And, last but not least, when I click on the "open a new tab button" I am taken to search.conduit.com. I used to get an 'empty page' with a tile of nine web pages I have visited recently. That's happened?

  The word "intermediary" reminded me strongly my FX is hijacked by an unwanted search and replacement c. see the followiing for beginners:

  Remove a toolbar that has supported your Firefox or the homepage search

  If it does not retire the unwanted guest to your full satisfaction, come back with more details.

• How can I turn off password on firefox 18 Manager, the option button is checked, but shaded so I can't uncheck it

  I'm asked whenever I visit a site that I enter a password to save in firefox 18, it is now getting boring. I tried to turn it off, but in firefox settings box is greyed out and won't allow me to put the password manager off, I know that I can never choose "for this site" in the settings but with almost all of the sites, you are going to is now required to sign it becomes really upset me. If this is not resolved I might reluctantly change browser.

  The instructions to

  http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-bug-Norton-Add-ons-trigger-Firefox-18-Password-Manager/TD-p/888683

  explains how to change the N360 setting to solve this problem.

  Tested and works. No more unwanted guests.

• calendar of events 1 hour off

  Why are my calendar events showing 1 hour late on my Apple Watch compared to my Iphone?  My calendar from iCloud, Iphone and Mac calendar show all meetings, however my Apple Watch displays correctly for calendar events even 1 hour behind.  Some calendar events are shown at the right time on the Apple Watch, but others are 1 hour behind.

  I already tried to change the time zone settings schedule support on iCloud and my Iphone.  I have rebooted the Iphone, restarted the Apple Watch.  Modified manually zone settings to force the correct time zone.  Nothing seems to correct the problem.

  The events in question were all created in the Eastern time zone (I am in the Central time zone).

  I could fix a meeting by opening it up on my Iphone and setting meeting for the Central time zone time zone, and then fix the meeting start and end of the time.  The only problem is that it wasn't a meeting I have initially planned (I'm just a participant).  My Apple Watch watch now this meeting at the right time (corresponds to my calendar to the Iphone), but apparently I now have the meeting?  I started to get meeting answers email pass/fail notification for this meeting, however I am not the owner/creator of the meeting.  Now, everyone thinks that I have the meeting.

  If I use this method to fix other business meetings, I'll end up sending additional unwanted guest who replace the meeting invitation sent by the owner/organizer of the meeting.  This is not acceptable.

  How can I get the exact time on my Apple Watch attend these meetings?

  Hello

  It can help to reset the data synchronization on your watch. With your iPhone and Apple Watch connected via Bluetooth:

  -On your iPhone, in the application of Eve, go to: Watch My > general > reset > tap reset sync data.

  -Nothing seems to be happening, but the process will be executed in the background (invisible to the user), removal and replacement of all data in calendar on your watch, so allow a minute or two before checking it in.

• Options of fonts and multiplayer games/chat MSN emoticons

  I have recently reinstalled, with the support of Microsoft support email, my OS (Vista Home Premium 34 bit), etc., the applications and drivers. Since then, I was unable to access the option of police while playing TexasHoldEm MSN.

  The steps proposed to solve this problem of ZoneWebmaster of the site were unsuccessful. It's a minor inconvenience, but I am especially concerned about possible virus or other "unwanted guests".

  It is possible to my antivirus or malware protection programs is not compatible (avast! and Windows Defender)? Or maybe that download Malwarebytes and Spybot are the cause? Or a request that I might have overlooked? Or I have other...?

  Hi Publicwifidependent,
   
  Method 1:
   
  Here, you need this problem in uninstalling and reinstalling Add-ons of internet explore.
   
  Make sure that you remove these two of manage add-ons.
   
  MSN Games - Installer
  MSN Games - Texas Holdem Poker
   
  You need to optimize Internet explorer to delete Add-ons and try to go on msn games and start the game again, the modules will be resettled.
   
  How to optimize Internet Explorer
  http://support.Microsoft.com/default.aspx/KB/936213
   
  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
   
  Method 2:
   
  Also try cleanboot and search of the question.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Host is reflected in the report, even after deletion in Foglight

  Hi all

  We are 5.6.4 Foglight to monitor infra metrics of our environment. We have a "Service level Iterator" report for guests see availability.

  In this way, we get availability for some additional hosts that are not there in the console and which are already deleted from the data management.

  Please guide us to resolve this issue and get rid of unwanted guests.

  Kind regards

  Guenoun

  People,

  I hate to say it but pleaase prosecute with assistance as soon as possible.

  I know there are ways to purge the data / remove obsolete objects

  https://support.quest.com/SolutionDetail.aspx?ID=SOL64596

  http://en.community.Dell.com/TechCenter/virtualization/infrastructure/w/fog-virt-wiki/5732.stale-objects-script

  BUT, whenever we play with the data model and purge the data that I get nervous that the removal of the wrong thing may influence your reports (and data will be gone unless it has been saved).

  Thank you

  Golan

• I get the thesis of my observant event log errors.

  I get the thesis of my observant event log errors. Please help me find a solution for the errors I have thanks. On the correction of errors please send me web links to solve problems.

  1. your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00D041BE61DB address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  2. your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x0800270004C2 address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  3 session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  4. dynamic link libraries custom are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  5 resolution of names for the name officecdn.microsoft.com expired after none of the servers configured DNS responded.

  6 WLAN AutoConfig service has stopped successfully.

  7. The ICS_IPV6 failed to allocate _ bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system.

  Log name: Microsoft-Windows-Dhcp-Client/Admin
  Source: Microsoft-Windows-Dhcp-Client
  Date: 19/02/2015 04:27:17
  Event ID: 1001
  Level: error
  Description:
  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00D041BE61DB address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  You can remove the error by following the advice of 4468mt in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/EventID-1001-DHCP-your-computer-was-not-assigned/2b5227e0-8171-E011-8dfc-68b599b31bf5

  Log name: Microsoft-Windows-Kernel-EventTracing/Admin
  Source: Microsoft-Windows-Kernel-EventTracing
  Date: 19/02/2015 04:25:11
  Event ID: 3
  Level: error
  Description:
  Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  See the following link for a solution:
  https://social.technet.Microsoft.com/forums/Windows/en-us/0c942bd9-47ad-4897-a5c2-485cc9fe681f/Microsoft-Security-client-OOBE-stopped-due-to-the-following-error-0xc000000d?Forum=w7itprosecurity

  Log name: System
  Source: Microsoft-Windows-Wininit
  Date: 27/02/2015 03:34:33
  Event ID: 11
  Level: WARNING
  Description:
  Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  This report of warning is ignored. Only occasionally do you see event ID: 11 reports that reveal an unwanted guest when the computer is started.

  Log name: System
  Source: Microsoft-Windows-DNS-Client
  Date: 24/02/2015 22:51:01
  Event ID: 1014
  Level: WARNING
  Description:
  Name resolution for the name of officecdn.microsoft.com has expired after none of the servers configured DNS responded.

  This report of warning is ignored. The frequency with which this report occurs varies from one computer to the other depending on the quality of the internet connection. They are usually indicative of a temporary problem and if not all computers are located in the most, Event Viewer system log.

  Log name: System
  Source: Microsoft-Windows - autoconfiguration WLAN Service
  Date: 18/02/2015 23:39:07
  Event ID: 4001
  Level: WARNING
  Description:
  Autoconfiguration WLAN Service has stopped successfully.

  This report of warning is ignored. These reports are generated every time that the computer starts shutdown.

  Log name: System
  Source: Microsoft-Windows-SharedAccess_NAT
  Date: 19/02/2015 04:25:19
  Event ID: 34005
  Level: WARNING
  Description:
  The ICS_IPV6 failed to allocate

  bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system.

  This report of warning is ignored.
  https://support.Microsoft.com/kb/2550111?WA=wsignin1.0

  You have no reports of significant error in your event viewer system log.

• My web pages receive unwanted offers as inserted text and additional annoying advertising as part of the page. How can this be avoided?

  I can forward silkscreen if you give me an email address.

  Hello, this looks like a problem possibly caused by malicious software on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (especially guests 0.91.3 thingy, toolbars, the things that you do not have installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• How delete/remove an unwanted network connection?

  How can I remove/delete a unwanted network connection that appears in a list of possible connections?

  I have my usual point of connection, but somehow a second connection point with the same base name appeared, but his name is the same as my main, but with the addition of his name to "guest.

  Hello:

  It depends on.

  With Windows 8, you right click on the network, you do not want and select forget this network.

  With Windows 7, see this link.

  http://www.technixupdate.com/forget-or-remove-WiFi-network-remembered-connectivity-details-in-Windows-7/

  If you want to never see the comments network, disable the network comments option in the configuration menu of your router.

  The "Guest" is an option on many routers that allows you to have people connect to internet via wifi from your router, but not have access to your home network.

• DOWNLOAD SECURITY with the GUEST ACCOUNT?

  How to lock any ability to download anything on my computer when it is in the account "guest"?  I thought that GUEST accounts are locked to add all the software?  As an experiement, I just downloaded Yahoo Messenger on my 'Guest' account and it worked!  (I think it would have let me NOT download and install)

  I went to 'HELP' and he said that everything must be locked on - so, how Messenger download and has been on my PC that I was in the guest account?  Help!  For security I want to lock my pc, so guests can not put anything unwanted on.  WebWatcher, Spyware, etc.  Thank you!

  There are applications that install on the local profile only.  Which; s the way some applications become around the UAC stuff.  They do not affect anything other than the GUEST account.

• Guest access with CWA on ISE 1.3

  Hi, we have implemented CWA for wireless using ISE. However there is a problem, the redirect URL is a name, not an IP address and public use DNS servers dhcp, so CWA scope comments does not work unless we put society DNS servers.

  Is it possible to configure ISE to send the ip address instead of the name of redirection in CWA?

  Concerning

  Yes, you can set a static NHP to use for redirection in the authz profile:

  authzprofile_staticpsnip.PNG

  

  But you'll find yourself with a cert for the user experience error unless you have IP addresses in the areas of SAN of the ISE certificate.  I guess you're unwanted by using internal DNS for the guest can resolve host PSN names correctly?

  Tim

• BlackBerry Smartphones Can not decline, ignore or delete an invitation unwanted BBM on the Torch 9800

  I received an invitation BBM a stranger. I can't deny, ignore or delete this unwanted BBM invitation on the Torch 9800. I t is highlighting options, but when I select the options, nothing happens, and the invitation is still there.

  Any message may be removed or reduced, but not this specific one. (It is sent by a person in Thailand)

  Virus can be sent via the guest on the BBM? How can I get rid of this unwanted invitation on my BB Torch?

  If there is such a thing as a virus of BlackBerry, I guess it could be sent in this way, but there isn't.

  Remove the battery while your phone is on, then replace it.  Then see if you are able to remove it.

  Let us know if that helps.

• Optimize Windows 7 guest operating system

  Hello world.

  Can someone tell me please in the right direction for advice on how to better optimize Windows 7 (ultimate) to view.

  I have a few official VMware tutorial on how to optimize XP either disable theme improvements, disable the screensavers, full hardware acceleration, delete hidden folders update, disable indexing services, disable the Windows paging, turn off sounds, remove restore points, remove unwanted applications, turn off of the disc etc. performance monitor but walked if some VMware guidelines official ther on how to optimize W7 in a similar way (I can't not find a).

  I found http://www.vmguru.nl/wordpress/2010/07/how-to-optimize-guests-for-vmware-view/ on the web, which can be a good starting point, but if anyone knows of any other indication, I would be grateful.

  Thank you

  PK

  Have you seen this?   http://www.VMware.com/files/PDF/VMware-view-OptimizationGuideWindows7-en.PDF

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Dashboard guest disables the box to

  Hi all.
  
  I have a problem using the selection multiple guest in a dashboard, imagine that you create a prompt on a column with a value of more than 500 separate, then in a dashboard you want to select all values except one.
  
  So in the dashboard, you open the multiple selection box and then press on the "< <" to select all values, after that select the value that you do not want to display, and then press on the ">" button to exclude, after pressing the "OK" button the box remains empty. I think it's some kind of bug, but I want to know if this happens to you in your system.
  
  I use OBIEE 10.1.3.3.3
  
  Thank you.

  Yes, it happens to OBIEE 10.1.3.3.3

  Possible work would be around after you have selected all thanks to< click="" on="" edit="" button(bottom="" left="" hand="" side="" of="" multi="" select="" window),="" now="" remove="" unwanted="" ones="" click="" ok="" will="" return="" to="" multiselect="" window="" now="" again="" click="" on="">

  -Hope it helped you
  Srinivas Pauline Martin