Unwanted horizontal line shows that in Firefox

A horizontal line appears below the chart labeled '' this is unaffordable '. It shows that in Firefox. Any suggestions?

www.ourhealthcarecrisis.com

(many thanks to those who helped me to get this site to work)

Move your tag to before the word "Healthcare" as shown below - it is currently at the beginning of the

Unaffordablehttp://this is unaffordable"/ >

Health care insurance companies

Tags: Dreamweaver

Similar Questions

  • Vertical lines shows that when using document feeder / have given help and discussions, no luck

    I have two printer hp models 1536.   Two of them have a vertical line when using the loader to scan or copy documents.

    When you place the point on the glass, scanning or copying is clear.

    Reading the discussions... tried to plug directly into the wall, cleaned feeder and glass, etc.

    I still have this problem

    Any ideas?

    Driver or firmware problem?

    The question is probably not a driver or firmware issue - it is probably a task on the thin glass used for playback through the ADF.  Try to clean the glass broadband of 1 "to the left of the main scanner glass. A tiny spec can cause the problem you are experiencing.  It can help to hold a flashlight almost parallel to the scanner glass to highlight all the stains on the glass.

  • Always get horizontal lines on video during export to 720 x 480 AVI with "Deinterlace" turned on

    Professional Hello again fine,

    I use 6 first on a Windows 7 computer.

    I always get horizontal lines in my video during export to AVI 720 x 480, even with "Deinterlace" lit.

    I had a doubt on another thread and said robodog2 that it is interlaced with the lines of the file are not displayed when you use a selection of progressive export file...

    http://forums.Adobe.com/thread/852077

    So I found the box "Deinterlace" via "chronology of export > movie > settings > special treatment > Modify > deinterlace ', but if I have this box checked, I still have horizontal lines.

    Here are the screenshots of the same base video before importing them in at first for an effect reverse, and after I saved the resulting file 720 x 480 AVI... the final file appears with the same horizontal lines if yes or no deinterlacing is checked.

    Lines are more visible when viewing the video in Windows Media Player they appear in these screenshots below... the lines have in fact characteristics of edge in the public eye.  The lines look like an old used TV sometimes when the antenna was not getting good reception.  Also, I am saving successfully the "chronology of export > movie" path with different codecs (this is no longer a file generated from the preview, I was talking about in the previous thread on this)... so I'm sure all the parameters with this version and I get this result with three different codecs, with and without the "Deinterlace" checked... I had the same experience over and over yesterday evening while he was also working with another file.

    No one knows what is the cause?... Please see the pictures below

    Thank you

    digiday

    AVI file of front of record in first -own original 720 x 480, 30 frames per second

    720x480avi_CLEAN.jpg

    After the backup in the first 6

    Horizontal lines showing in this first 6, 720 x 480, 30 fps AVI file

    PremiereEXPORTED720x480avi_horizontalLINES.jpg

    Hi David,

    Yes, I finally solve this problem, based on a chance observation on another forum.  On another forum a guy once mentioned the setting ' NONE FRAME ' in the 'Record Options' in the dialog "Export movie" when I export my movie to an AVI file, as seen in my screen shot below.  Otherwise, I think that setting was failing to "FIRST FRAME ABOVE".

    For the most part, I was getting these terrible horizontal lines when I exported the graphic effects that I created with imported Photoshop layers in my film projects... in these kinds of exports that horizontal lines were much worse and more obvious that if I was just export a project with the actual video that I had imported in my project.

    But still, even with the imported video, as examples of images that I posted on this thread, even in this case I saw the horizontal lines.

    So one guy on another forum said something about "ANY FRAME" setting in my export dialog box.  It relates to something else about deinterlacing it is better for this problem as the "FIRST FRAME SUPERIOR" or "FIRST FRAME BELOW" settings.

    As can be seen in my screenshot below, which is the setting I talk, but I was using the old 6 first of 1999all about, and options in the new versions of first export dialog are different.  The guy on the other forum that mentions that setting, that eventually solved my problem, said that the adjustment did not differ in a newer version of first he used, but I found this setting in my dialog "Export movie" , and that solved the problem.

    It was so simple and I went by so many things to try to solve it, including my files running through other apps to try to pre empt the problem and none of it worked... He just turns out to be THAT simple adjustment "ANY FIELD" and that solved the whole problem.

    First 6 and some newer versions of first, seem to have other problems, such as the creation of an oblong shape, rotation image from a round graph-shaped eggs after importation and applying an effect of rotation, but otherwise, once I realized that the solution of horizontal lines, I did pretty well understand many things in this former first and I got pretty good results.

    Viel Glück!

  • Firefox gave me a program that killed the unwanted cookies and showed me a pop up as they have been deleted and it disappeared. How can I get it back? Thank you

    Firefox gave me a program that killed the unwanted cookies and showed me a pop up as they have been deleted and it disappeared. How can I get it back? Thank you

    who could be this extension: https://addons.mozilla.org/firefox/addon/self-destructing-cookies/

  • Firefox installed on Windows 7 but the menu bar and icons is filled with small horizontal lines on the icons and the menu bar...

    I installed Firefox 21 on a new Windows 7 operating system. The menu bar and the toolbar at the top of the windows is full small horizontal lines. Sometimes, there are more lines and sometimes less. It makes the icons and menu items almost impossible to see. So far, is that the Firefox screen that made it. Other programs I have installed so far doesn't do this.

    Any ideas?

    Try disabling hardware acceleration in Firefox.

  • Shows HP LaserJet 3330 horizontal lines exactly each 1.5 "when you print a completely blank page

    HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.

    There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.

    However, a scan of a blank page on my computer (not printed) is perfectly clean.

    Windows 7. No change or upgrade.

    Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.

  • Y at - it a new version of Firefox, as of 16/11/15? Noticed on the Internet, however my 42.0 version shows that this is the last update?

    Took me to warn me, but I did 2 controls and it shows that the 42.0 version is up to date?

    42 of Firefox is the latest version.

  • on the left side of my address bar, is to show that firefox has blocked content that is not secure, whenevr I on facebook or any other applications related to it.

    Firefox blocks the content of almost all Web sites.

    It is even shows that for this page.

    Whenever I update the facebook page / year app on facebook that will appear.

    Previously it used to crash firefox, then I've updated, but since it is just keeping it blocking if gray / geen colorful lock is active on the left side of the address bar.

    So whenever I get this error I have to refresh the page & disable the protection on the page again.

    If the site is verified then firefox blocks almost everything.

    You can attach a screenshot?

    Use a type of compressed as PNG or JPG image to save the screenshot.

    You can try the following steps in case of problems with web pages:

    Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • Firefox 24 says Java and VLC should be updated, but they show that they are the most recent versions. How to eliminate the designation wrong update?

    I checked the updates of plugins Firefox 24 and it showed that I needed to update Java and VLC media player even though I knew I had the latest versions. I ran FF update for both links and rebooted but still said that both need to update after a new analysis. I uninstalled both programs then re-installed the latest versions. FF always says I have v2.06 VLC and I 'vulnerable' but the VLC software shows that I have v2.08 which is the last. Java is now properly recognized and are more marked as in need of update. How can I get FF to recognize that I have the latest version of VLC? Thank you.

    I know that VLC has a problem that they don't update their file serving the Firefox plugin, and I'm not sure Java but you can check the licensing of Java on trusted sites.

  • FireFox says Java is outdatedon my computer, but the control panel of microsoft shows that it is the what is the latest version with that?

    Firefox said I need to update Java. But I get automatic updates from microsoft in the Control Panel Add or remove watch it shows that I have the latest version of Java. And it has been updated 11/02/12 I don't understand, are plug-ins something different

    You seem to have 1.6.0_29 of next generation Java plug-in installed, where 1.6.0_30 is the latest version of Java.

  • I just installed Firefox V8. I'm looking for the indicator which shows that my session is secure, when I go on a site known to make a payment online. Where this indicator?

    It is always used to be an indicator at the bottom of the screen (I think) that looked like a small lock, to show that you were in a secure session. What happened in Firefox V8?

    Credit Safebrowser

    Therefore, the lock is more part of Firefox; It has been removed from Firefox 4. The padlock shows that there is a secure connection, but does not provide any additional information. You could make a typographical error, and have always been connected to a secure connection. The lock was replaced in Firefox 3 with the Site identity button. Familiarize yourself with the Site identity button at the left end of the address bar:

       https://www.mozilla.com/en-US/firefox/security/identity/
       https://support.mozilla.com/en-US/kb/Site+Identity+Button
       http://www.dria.org/wordpress/archives/2008/05/06/635/
    

    You can install this module if you want:

       https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
    
  • Hello. I have windows xp. If you use Firefox as my homepage, I get interference terrible display of vertical and horizontal lines. When I switch to Internet Explorer I don't get them. I want to keep Firefox as a server.

    Hello. I have windows xp. If you use Firefox as my homepage, I get interference terrible display of vertical and horizontal lines. When I switch to Internet Explorer I don't get them. I want to keep Firefox as a server.

    Here is something you can try:

    1. Click on tools and then click Options.
    2. Select the Advanced tab
    3. Select the general tab
    4. Uncheck the use hardware acceleration if available.
    5. Click file and then click on exit.
    6. Launch Firefox normally.

    Once you have followed these steps, you'll want to follow these establishments and see if the lines are gone.

    Click the Help menu and select Restart with disabled modules.

    Let me know if this has eliminated the problem.

  • When I click on Firefox Help/About it shows that I'm up-to-date, using FF 6.0.2 - but when I try to access Google more, she says I'm using FF 3.6?

    Sometimes when playing some games on Facebook, when I try to join Google more, and when I try to add plug-ins for FF.

    The info on the right margin is when you started the issue and static information. To see the current user Agent string, the easiest thing is to use

    Or do a search on the web for sites that display your User Agent string

    I suspect that research of fastbrowser, although she may have a Web site also includes installation of software on your computer, be sure to ask the ISP about it. I have now found http://www.fastbrowsersearch.com/ which could be search site, you use and apparently includes an option and help the information.

    It seems I may have been incorrect in implying that the problem is caused by a malicious software.
    Who is your ISP?

    Note that also Firefox itself can provide a security limited but useful in research and use of the web see

  • Satellite A200 shows weird coloured horizontal lines

    These multicolored horizontal lines with different lengths appear on my laptop.
    Soon they jump all over the place, and then the screen turns off. I get the blue screen saying something went wrong and restart my computer... I don't know what the heck is wrong... any suggestions?

    Thank you

    Are these lines shown all the time or when OS is loaded only?

  • HP Officejet Pro 8500 - horizontal lines that cross color print

    I just replaced the two print heads.  Ran alignment and the screen says it was successful.  Black print was nice, but color printing had horizontal lines through it.  I use it through windows 7.  The color is not true, when I run since Ubuntu 10.04.

    For print quality troubleshooting questions, check them out steps in the document located here.

    So, since you just change the print heads, check the steps located heredocument.

    I hope this helps.

Maybe you are looking for

  • 39L4353RB - programmers can fix 2 options in firmware for the Russia?

    Hello.39L4353RB, f/w 7.1.90.34.01.1, Russia.I hope Toshiba programmers read this forum. :) (1) can you enable '? capable"option, when users select the countries 'Russia' in the settings?There are many suppliers of DTV cable in Russia. But when I sele

  • Tecra S2 crashes during playback of DVD of battlefield 1942 or watch

    Hello I have a Tecra S2 with the following specifications: 1.73 Ghz1 GB OF RAMGB of Nvidia 6600 Software:Operating system recovery cdMS OfficeNorton Internet securityLogitec Webcam driversSync Nokia Software(all updates made) When I play Battlefield

  • ENVY m6-1302sa: HP ENVY m6-1302sa ACPI\HPQ0004\3 & 2411E6FE & 0 Driver 8.1 Windows x 64

    Hello I recently reinstalled windows 8.1 Pro x 64 and reinstalled all the drivers for the HP ENVY m6-1302sa HP Web page but I'm having trouble installing the latest driver that is listed as an unknown device in Device Manager: ACPI\HPQ0004\3 & 2411E6

  • Timed loop in loop of producer/consumer

    Hello! I have a loop of producer/consumer LabVIEW program configuration to allow me to properly capture the images that are large enough (8MP) at about 14 frames per second (FPS). The program works very well when the consumer loop is a while 'loop' (

  • 5548 stack and LACP

    Hi all First post here; so I'm sorry if I'm in the wrong thread... I inherited a bunch of 5548. I have two "stacks"; a stack of three (3) devices and another battery of two (2) devices. The stack of three is a cluster VM and the stack of the two is t