Up the Creek...

Similar Questions

• Use disk cleanup and lost all my personal files. Restore did not work. I'm near the top of the Creek

  I used the disk cleanup several times before but it has never cleared my personal folders files. Some of the data is critical and sentimental. I used RETORE, but he could not recover personal files of Windows Live. Y at - it no use - please

  Hi Dick,

  The personal folders of Windows Live, you are speaking of?

  Also, have you checked the Windows Live Solution Center?

  Please visit the following link:

  http://windowslivehelp.com/

  I hope this helps!

• The upgrade of the SDS disk leaves MBP (mid-2010) on the gray screen

  From 18:00 yesterday, I have prepared a new Crucial SSD 1 TB for my Macbook Pro (mid-2010), and now it does not start. When I reinsert the disc HARD original (Hitachi 320 GB at 5400 RPM), it starts always is more. I tried every key to start command, but it does not work.  What is going on?  I can't access even my disks on Windows PC, because they are more support or recognize Fat volumes (using NTFS), so I currently am up the Creek without a paddle. FWIW, I used Carbon Copy Clone to work.  Thank you for your time.

  Reset the NVRAM and SMC could solve the problem.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the management system (SCM) controller on your Mac - Apple Support

  Just wonder if HDD or SSD to install in external enclosure and could boot from it.

• Re: Lost the disc to install for Qosmio G20

  My Qosmio G20 has stoped working and I need to format the hard drive, but have lost the instalation disk so I'm towards the top of the Creek, unless I can get a replacement :(

  Hello

  The restore CD may be ordered from this page or the ASP from Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you want you can also install the OS from the original Windows CD and then you can download Toshiba drivers from Toshiba's European driver page.

  Welcome them

• How to load Windows on the new HD if there is no installation disc.

  The hard drive on my laptop died.   All software has been pre-loaded when purchasing through Dell.   After that I installed a new HD, how can I get Windows 7 on the new HD without an installation disk?   The software was purchased with the portable, but did not come with a disc.  What I have to buy a new copy?

  Thank you.

  Sunday, May 24, 2015 00:31:41 + 0000, RICHARDBROUILLETTE wrote:

  The hard drive on my laptop died.   All software has been pre-loaded when purchasing through Dell.   After that I installed a new HD, how can I get Windows 7 on the new HD without an installation disk?   The software was purchased with the portable, but did not come with a disc.
  What I have to buy a new copy?

  Your computer is equipped with a recovery instead of a partition
  installation DVD, which can be used to reinstall Windows it takes
  necessary.

  It also came with instructions on how to burn this partition to a DVD
  so you wouldn't be up the Creek if your drive is dead. Who should have
  was the first thing that you did when you got the computer.

  If you do not do this, contact Dell for assistance.

• Drive "D" will appear as complete on the computer.

  I noticed that my "D" drive capacity is full and I don't know why. I do not download music, videos, photos, etc... It should not be much at all on this subject. How will I know what's out there.  Can someone help me?

  The game, August 7, 2014 21:09:17 + 0000, Pam_779 wrote:

  I noticed that my "D" drive capacity is full and I don't know why. I do not download music, videos, photos, etc... It should not be much at all on this subject. How will I know what's out there.  Can someone help me?

  Whence the D: drive? Did you create it or she came
  with your computer?

  If the latter, it is likely a recovery drive, provided instead of
  a DVD of installation and you is intended to reinstall Windows,
  which would be necessary. He is not here to write anything
  to and you should not do.

  If I'm right about what is the D: drive, your computer also came with
  instructions to write content on this disc on a DVD, so you
  not up the Creek if the drive breaks down and you have nothing else. That
  should have been the first thing you did when you got the computer.
  and if you have not done so, you must find and follow those
  instructions immediately.

• I bought windows 8 'upgrade' for the pc, I just bought and don't have an older version

  is there a way I can just "buy" a license to put on the new PC without actually crossed the steps of buying and installing a new disk just to be updated? Unfortunately the retailer won't bring back the upgrade so I can just buy oem so im a bit to the top of the Creek so to say. I have an old laptop about 2 years since I intend on decommissioning that is running windows 7 is possible I could use it as I no longer use windows 7 on this computer? can I transfer or reuse permissions on this one there? just spent over $ 1,000 construction this pc do not rely wana spend another hundred ontop of percent certain i used to buy windows 8, just so that I can use it... any help is appreciated!

  See the following topics:

  http://winsupersite.com/article/Windows8/clean-install-Windows-8-upgrade-media-144648

• Is it possible to update the first pro and still be able to use the projects of the old version

  Is it possible to update the first pro and still be able to use the projects of the old version

  You can open projects from versions with Premiere Pro, Yes. But I agree with Bob - make a copy of the project and open the copy. You won't be "up the Creek" if something goes wrong.

• Design of the sensitive site with Muse

  Muse uses an era mobile pre set with the design model. How many 'web designers' sell their clients sites Muse how was invited to change their sites, how they are to the top of the Creek without a paddle?

  Reactive Adobe Muse CC 2015 is now online. Please install the update of CC > Apps.

  What's new: news summary

  Release notes: https://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html

  Delicate design:

  Adobe help Muse | Create responsive Web sites

  Adobe help Muse | Responsive web design in Adobe Muse

  Adobe help Muse | Migrate existing Adobe Muse Web sites to answer

  Tutorials

  To get started with Adobe Muse (replaces how to make a website with Adobe Muse (coffee of Katie)):

  - https://helpx.adobe.com/muse/how-to/create-responsive-website.html

  Create a sensitive webpage with Adobe Muse:

  - https://helpx.adobe.com/muse/how-to/responsive-web-design.html (more detailed features RWD of Muse demo)

  Thank you

  Sanjit

• Where the old made short dragbar?

  I can't find how to render a short segment on the timeline. I read your suggestion, but the square bracket + alt is nothing. There is no movable thing to mark a segment as you had on the previous versions of Adpbe first. I find nothing in the drop-down menus. Your terms in the explanations are not clear either, you need a simple diagram of your own interface with a glossary of words you use to name your tools. It's Basic. I have a problem with what it is rendered more than 4 seconds then a moment too, so I'm really to the top of the Creek here with a 40 minute film to change.

  Display of the workspace toolbar is now an option. In the timeline panel, place it in the small Menu key...

• Random metadata for the LR4 warnings mean something serious?

  (LR4.1 on an iMac 2011 with 16 GB of RAM, running OS 10.7.4)

  I do my first big job in LR4 and worries me also the metadata warning indicators conflicted (two types: "metadata write error" and "metadata have been modified outside") are appear and reappear randomly on my thumbnails of images. There is absolutely no consistency in which images are affected. I guess that the problem may be due to initially because I had used to apply a couple of preset import - a copyright line, as well as the development of specific camera settings. These were created in Lightroom 2: most of the 14 000 images in my Lightroom Catalog date from before my upgrade to LR3 in October (I went to LR4 at the end of April and 4.1 a week before; I did not notice this problem in LR3, but I did a lot of work in this version of the program, so it may have been present and I just did not notice).

  As I said, not all images are affected; but those who are have nothing in common. (While most of my pictures have applied to import presets, or later - when I came with the new default settings of camera specific, I've also applied retrospectively to all images, I've not yet dealt individually.)

  My frustration is not just that this problem exists in the first place: if it is caused by the import settings, I deleted develop it a (and triple-checked that nothing other that default values of own Lightroom treatment applied) and that of copyright, throw away the original. However, when I try to erase the flags by clicking on it and OK 'ing the OK and dialog or command-S box' ing in this way, they grow upward immediately or shortly after; sometimes on the same than before images, sometimes on the other.

  I had "save automatically to XMP" checked as a preference (have been for years, so all my images, XMP files next to them). Although Lightroom imagine that images were also changed in another program, the vast majority are NEF raw files, and I do not use any other image display or modification of programs. (There are also a few Photoshop files that may or may not have flags).

  How I tried to solve:

  1 a lot of saved - either by selecting all images in a folder or collection and do a manual backup or by clicking on the flag and OK'ing the dialog box; or by selecting only the relevant images and do the same thing. or through one by one, ditto. But whatever I do, flags more grows on the same or other images in the folder (although sometimes after several stops, they seem to disappear for good).

  2 throw LR preferences. Since it made no difference, I recovered and reintegration.

  3. delete all user presets to develop, as well as the copyright for the import. (I Print and FTP presets, and I hope that I did not have as well. I don't use these modules for the moment, however.)

  4. has realized it was useless on the optimization of the catalogue, since this happens automatically, alongside check its integrity and backup, each time I have quite Lightroom - what I'm doing after each work session, to make sure that I'm fully backed up.

  5. at some point in all of this, I also restarted my Mac (after I had deleted the preferences, I think).

  6. I have excluded my Time Machine backups LR catalog, although there was a stop at this for a few days this week, after I upgraded to LR4.1 (and now I'm worrying that actually this could go back to my upgrade to LR4 in April). But probably the catalogue is not corrupt, or I would get a warning during regular inspections on its integrity?

  What really worries me is that this weird behavior means that there is instability in Lightroom that will tell the work I did on my images is compromised in some way, and I'm going to lose again them.

  How can I get rid of these warnings (incorrect) randomly permanently?

  (I publish on this last week, but did not know how pervasive and persistent, the problem was.) I rang Adobe for support on 7 June and was cut twice; they have not responded as they opened when I was cut for the second time. I tried phone them three times this morning and couldn't move - I've been cut once again, twice; the other time, I just got no air circulation. Their phone system seems to be completely to the top of the Creek. When I managed to speak to someone, kept going to the sound - what the techie seemed oblivious to, no matter that I kept telling him that I could not hear it.

  I'm really worried that the intensive work, I do in Lightroom at the time current will all go to waste, so I cling to the time where I really need to take advantage of these days I have free right now to do the job.)

  It took two weeks, but Adobe finally solved this problem for me. It has proved to be a problem with the permissions on the Mac - i.e. something obscure to do with the operating system (I'm 10.7.4 OS), not directly to do with Lightroom. The solution involves reinstall Lightroom 4 and restart with the SHIFT key (a "safe boot") and then selecting my pictures, by clicking on a flag and OK'ing the "Lightroom replace settings" option by default. I then repaired the permissions with disk utility, rebooted the Mac normally, downloaded LR4.1, repaired permissions again and checked again for the flags. I can't tell you the relief when they weren't there more!

  I checked log disk utility, and I had not fixed the permissions after installing Lightroom 4 April 25; I did only a month later. I had read somewhere that it is therefore essential to repair permissions after installation of the software (and Lion always wildly overestimates the time it will take, which is off-putting); but this experience has convinced me to return to my old practice on that. Although it may be that this particular permissions issue is not related to that (I do not understand the software at this level: I just do what I said!).

• Warnings from Event Viewer: connection rejected by the server. Reason: [AccessManager.Reject]

  Looking through our windows event viewer application logs, I noticed a large number of these warning listed. What would cause that they messages generated? Nothing to worry?

  It seems that they are all created between the creeks of the live event - after a stream stopped live published and before the next live event stream begins, about a 20-minute break.

  Type of event:	Warning
  Event source:	FMS (Edge)
  Event category:	(264)
  Event ID:	1213
  Date:		31/12/2011
  Time:		19:22:37
  User:		N/A
  Computer:	FMS

  Description:

  Connection refused by the server. Reason: [AccessManager.Reject]: [code = 403 required auth; authmod = adobe]:

  Type of event:	Warning
  Event source:	FMS (Edge)
  Event category:	(264)
  Event ID:	1213
  Date:		31/12/2011
  Time:		19:24:02
  User:		N/A
  Computer:	FMS

  Description:

  Connection refused by the server. Reason: [AccessManager.Reject]: [authmod = adobe]:? reason = needauth & user = testusr & KnMAAA = salt is & challenge = lHIAAA is & opaque = lHIAAA ==

  Thank you

  Dave

  Yes - OUT Authentication plugin is a kind of plugin access to the message you get is valid - because I assume that somebody was trying to publish to your FMS without going through the correct credentials. It is therefore the reason why this message is generated. I hope that now things are clearer to you.

• Determine the throughput and bandwidth?

  Hello!

  I looked for a long time but I just can't understand it.

  My drive supports all types of live - stream, vod, dynamic and progressive download

  Now for the needs of monitoring, I would need to understand the flow of the Creek. It is easy to do for dynamic flow but is there a way to do it for all the other rivers of the OSMF?

  Also, is it possible to understand the bandwidth of the user?

  Thank you very much in advance

  Hello

  Here's how I did it:

   50                NetClient(netStream.client).addHandler(NetStreamCodes.ON_META_DATA, onMetaData);
   51                function onMetaData(value:Object):void
   52                {
   53                     NetClient(netStream.client).removeHandler(NetStreamCodes.ON_META_DATA, onMetaData);
   54                     // We assume that the asset metadata has the most accurate value,
   55                     // that's why we overwrite any existing value.
   56
   57                     // audiodatarate and videodatarate are set in kilobits. We need to transform it to bytes.
   58                     averagePlaybackBytesPerSecond = (value.audiodatarate + value.videodatarate)* KBITSPS_BYTESTPS_RATIO;
   59                     duration = value.duration;
   60                }
  

  https://sourceforge.NET/Adobe/SMP/SVN/latest/tree/trunk/player/StrobeMediaPlayback/src/org /osmf/net/PlaybackOptimizationMetrics.as

  Note that these metadata are usually not available. You better average of yourself (or try to extract the metadata as a tip to speed things up) - you can see how I did here too.

  Hope this helps,

  -Andrian

  P.S. If you see something wrong, or if you think that there are things that can be improved with the above approach, I would be grateful for your comments.

• Way to sync the audio better?

  Best practices for WMV FLV QT to name a few. I plan to export in multiple formats, go ahead. Does anyone know if there is a trick or a plug-in that will provide improved audio synchronization even on slow machines?

  You are looking for a solution to the wrong place. There is no magic in there, it's all in the flow of data. Most synchronization problems are simply because one of the creeks eats too much bandwidth because of the unnecessarily high data rates. For WMV and FLV the presets that come with the AE must be balanced, enough to cover most of the tasks. For QT the only CoDec in question is certainly H.264 and AAC for audio uses, where still the default of 96 Kbps should be more than enough for most tasks. Yet you never know l unti you are trying. However, everyone happy is an unattainable goal. You could reduce your data rate 32 Kbps and only run to 11 kHz and someone would still lag on his computer of a hundred years. For a Web site, you could offer the best options, but for things like reading office, you really should set and check the minimum requirements before you encode the media and everybody must accept this.

  Mylenium

• Firefox locked up with YouTube when using Dragon NaturallySpeaking

  I use Dragon NaturallySpeaking to get all my data into the computer as I am paralyzed from the shoulders down, incapable of any other way to the data. When I click on a link that would be for YouTube or other types of media devices, Firefox and Dragon NaturallySpeaking will lock leaving me place the Creek without a paddle. Short of abolishing the use of Firefox as my default browser, I am open to all suggestions that you may have because Microsoft Internet Explorer is a program that I can't stand using and I use Firefox since its inception and I like except when it crashes.

  Thank you very much and I am open to any suggestions you might have before uninstall DNS because it is a must.

  Bruce

  I noticed a similar problem, which began occurring only recently. If I'm dictating in Firefox use Dragon NaturallySpeaking 8, if it consists in the search bar or in a Gmail e-mail window, Firefox can lock up without warning. The only way I found to recover the problem is to close with force Firefox using Windows Task Manager.

  EDIT: this error message titled 'dd10edit' might be relevant - "COM returned an unexpected error code: details are HOOKERR_CONNOTINJECT.