Update 1123us dv4

Similar Questions

• BIOS update laptop dv4 envy

  HP Envy dv4 Notebook PC windows 8 IE10.

  About 8 or 9 months ago there was a BIOS update. It has been downloaded, but you have not installed (installation failed). a few days ago there is another update for the Bios, but since my first update was unsuccessful I should try again or let alone since every thing works fine other wise.

  Do not use the laptop (W8) a lot because I prefer my PC W7.

  Thank you

  WAY

  Hello

  Unless the bios update fixes a problem you're having with Notepad or offer additional functions, you need, my personal opinion would be not not to date.

  If everything works Ok, I'd recommend just leave as is.

  Best regards

  DP - K

• HP Pavilion dv4-1120br: doubts about the BIOS update for my model with the operating system current instaled.

  Hello

  I have a HP Pavilion dv4-1120br, I know that this model of HP laptop is old, but I instaled the 64 bit of Windows 10 on my machine and saw that my BIOS is version F.30 and the last of them available on the site of HP F.66 has.

  The problem is that this model is not suport for Windows 10 because, as I said, is too old. Can I download and run the update of the BIOS for Windows 7 64-bit available in the Web site, or I need to downgrade my OS to Windows 7, update the BIOS and then pass it back to Windows 10?

  Thanks for the help!

  Cantarino

  Hello;
  
  Let me welcome you on the HP forums!
  
  Your second proposal is correct - as the updates to the BIOS on the HP site are specific to the OS version and if you try to run one for Win7 in Win10, it will refuse to run.

  Good luck

• Dv4-1120us bricked by update of the HP Bios

  Frédérique put I went to update the bios on my laptop as I previously without incident.  Well this time the update downloaded, installed and turned off Windows Vista 64-bit SP1.  After that nothing! The lights of power will light up, but that's all.  No HP, no MSFT screen no screen no nothing.  Honestly, I think that it is a bios update due to the update of the HP. It's the update, I installed: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67379-1&lc=en&dlc=en&cc=us&...   Long story short HP support chat session has been very helpful and I will send a box to air next day prepaid to ship at his own expense to solve this problem.  Comments are welcome, but I highly recommend anyone with this laptop not to install this update! I have taken out the battery, dethroned the ram and others without any result.  I hope they can fix.

  LordVader311
  "The power of the dark side!

  lordvader311, many of us brick already our dv4s with the last update of the bios HP but you can fix it yourself in a few minutes as follows

  BTW, the credit for this goes to PONGSTER who told us all that...

  Change Note:

  I edited the steps for the dv4-1140GO users. Moreover, the 1125nr, 1140go and the CQ45 seem to share the same room, as they use the exact same application BIOS flashing.  This bodes well for those of you who need to get theire fixed dv4, instead of send for repairs.  Don't forget, if you missed your BIOS, sending in for repairs is not the only solution, I discovered, after searching for all possible solutions.  Do the following before you send anything in repairs

  I have a dv4-1125nr.  I'm not sure this will help, but you may as well try it before your sending for repair.  I have corrected my messed up BIOS update by following the exact steps, I'll describe here.  There is hope, and you don't need to have your motherboard replaced.  Just follow the instructions and you should be typing on your dv4 in no time.  It took me about 10 minutes, senior, to get all this fact.

  Here we go:

  Good... Here are the exact steps I took to get my dv4 back in working order after a failed update BIOS using HPbuggy update (I just had to repeat what we already know... ) I simply cut and paste of 0,0 steps, so all credit goes to him and the engineering on this forum (http://forum.notebookreview.com/showthread.php?t=340079&page=3) (Bigozone) Acer section

  Here's the exact model number and general specifications: dv4-1125nr, Intel Integrated Graphics 4500, blah-blah-blah-blah (all I had to determine was update the BIOS was necessary for my dv4 with integrated... graphics card later)

  1. go to this site: http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2100&lc=en&dlc=en&cc=us&lang=en&product=3795301 and download the file: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41969.exe

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. I used a 128 MB USB Thumbdrive (the smallest I could find, because they said the smaller the better ) and reformatted as FAT (by default) in Vista by clicking with the right button on the drive and clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  5. If you have the graphics card Intel integrated like me, copy the 30F7F24U. FD to the key USB and RENAME the file 30F7F24U. FD to 30F7. BIN

  NOTE: the file 30F7F24U. FD is for those who have the Intel 4500 integrated video, while 30F7F24D. FD is for those who have the Nvida graphics.

  Copy the appropriate file on the USB key, and then on the USB, rename it to 30F7. BIN

  The next steps are to 0,0 exact steps, which I simply numbered him: (please follow the correct procedures here and 5 minutes from now, you'll be typing a response to this post on your currently borked dv4 )

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.
  BIOS worked normally thereafter.

  My last step:

  17. dance of joy! Hehehe these instructions should be on the HP site, since they do not seem to bother to test the updates they push users (here I go again!)

  Hope this helps all of us (it will help me when I mess up my BIOS Flash... hehehe)

  Message edited by DJK on 01/13/2009 17:32

• Problem white screen of HP DV4-1242. Tx drivers updated so no startup, is my GPU dead?

  I think that my Tx Hp DV4-1242 with 9200GS nVidia GPU THAT just died today. Its been about a year since I bought it. Numlock keys flashing '4' time, lifted the eyes on the site of hp support for Flash/beep codes / absolutely no boot, caps lock (link: http://bit.ly/cwOCdx , discovered, it is a failure of the gpu/controller, experienced overheating issues before, the authorized service center hp claimed they fixed a month ago while I found that overheating snap made not a lot of difference.) Last night I updated my drivers from nvidia's official website (link: http://www.nvidia.com/object/win7-winvista-32bit-257.21-whql-driver.html) and in the morning I think that my gpu dropped on me. Is there something I could do about it?

  Guys guess what, my laptop is to life once more. IAM so happy here's what I did.

  Ripped open my laptop for her skin, I want to say my motherboard (thank God he gave me a few tense moments), followed the guide to disassembly I found on the net, there was a lot of accumilation of dust on the CPU and gpu, the radiator and the fan. Sprinkled on it, re - apply the thermal paste on the gpu, return all the threads of the screws and parts, booted up my laptop and here it starts without any problem! With the exception of the cmos checksum error, there was no other error message! Thank God it works now Heres the guide apply new thermal paste on the gpu http://bit.ly/bES6qf

  Mods, I guess you can close this thread now!

• updated vista sp2 my dv4 1412tu no sound

  after update my vista to vista sp2 from microsoft, an automatic update my laptop dv4-1412tu entertainment pc fail to read the audio that I try to udate my audio driver (IDT audio codec high Dafinition) says she is uptodate. what I can do.

  Hello

  You have a few options as I see it.

  Go into Device Manager and uninstall the driver and restart and unit automatically installs the driver.

  Try to run the system restore to the date where the unit was working fine.

  Try to update the driver from hp.com for Audio & Bios site.

• HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

  System: HP Pavilion DV4-1125nr PC Notebook

  Product #: FR922UAR #AB

  The system board ID: 30F7

  Version of the BIOS (before the update): F.12

  OS: Windows 7
  

  I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

  I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

  Please help me...

  Fortunately I found a Solution to this problem.

  Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

  http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

  1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  "5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

  The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.

  First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

  Fortunately, I found a direct link to this version F.12 in the next thread.

  http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

  F.12 version:

  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

  This was F.12 and worked for me. Thank God Almighty I return my PC.

  Thanks to all who contributed in the discussions above.

  Kind regards

  -gmuhammad.

  If you think that this post has helped you, then please give KUDOS *.

  Close the thread (Accept as Solution), if your problem is solved *.

• HP dv4-1123us Pavilion Media Card will not read

  I have a Pavilion dv4-1123us who will not read a 16 GB SDHC media. He reads a xD 512 MB and 2 GB.

  What's wrong?

  I wanted to let you know that what you did was good.  I invited a friend of mine who is quite in computer problems.  He checked that the drivers you have installed were correct. Soon, he realized he had a problem with my Photo Picasa 3 program. There google something like Picasa won't read the card camera and found that there was an automatic upgrade a few days ago (when I started having the problem) that created this problem.

  It's the Gremlin Picasa version Build 3.9 136.18. affecting Windows Vista and XP and Windows 8.

  This is what happens:

  Hello

  There is a problem with imports in the latest version of Picasa (3.9 Build 136.18). Windows Vista and XP seems to be affected. Until it's resolved use Windows to perform the import.

• Firmwire update hp pavilion dv4 showing consider replacing your battery

  I just updated the firmwire to the bios of my computer hp pavilion dv4-2165dx laptop and my battery display is consider replacying your battery, bur the information would rather avoid if doesn't happen. How can I turn off?

  TITLE: HP Notebook System BIOS Update (Intel processors)

  VERSION: F.0F REV:
  DESCRIPTION:
  This package provides an update the system BIOS. The update is installed on models of laptops using a supported Microsoft Windows Operating System. A reboot is required to complete the installation

  PURPOSE: recommended
  SoftPaq NUMBER: SP51636
  ENTRY INTO force: 16 January 2011
  CATEGORY: BIOS
  SSM SUPPORTED: YES

  S/O SUPPORTED DEVICES:

  Prerequisite: no

  IMPROVEMENTS:
  1 updates to BIOS to solve the problem that HPSA version 5.0 will signal the battery check battery

  HOW TO USE:
  1. download the file by clicking on the button 'Download' or 'Get software' and save the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

  2. double-click the downloaded file and follow the on-screen instructions.

  Hello foanti,

  Welcome to the HP Forums! I hope you enjoy your stay!

  I understand that the computer asks you to replace your battery. I apologize for the late reply, but I will do my best to shed light on that!

  This error message could be a mistake. Fortunately, Microsoft has released a document with the steps to solve this problem. If you follow these steps, it should cause the error to disappear if it is not true. You can find this document here: you may receive a warning message "Consider replacing your battery" properly on some old HP laptop running Windows 7

  I think that these steps wil solve the issue. Whatever it is, please provide your results. Thanks for choosing the HP Forums. Have a great day!

  Mario

• Update of the modules of RAM on dv4-2145dx

  Hello, I need a little help on upgrading the ram for dv4-2145dx I need to know two things, first of all, I tried to unscrew the memory or cover plate but so far, that the coverage is not just comes off and it just makes a noise clicky of sorts even if I had to unscrew and so I can't access or replace the RAM modules. Second type of add-on memory ddr2 can I use with this laptop can be 667 or 800 or less. Well that's all my questions, someone who can help me on this issue I will really appreciate please and thank you have a nice day.

  Hey thanks Big Dave your trick to fight against the removal of the cover of the ram or plate has worked like a charm also by doing the same trick I could access the wwan module that seems to need a sim card and the radio module and if you have any idea where I can get these parts please let me know as I am looking to move to 6 GB of ram due I have windows 7 64 bit, but so far, I have to admit that, with only 4 GB of RAM for the operating system works quite ok. Thanks for your help big time I really enjoy it and have a nice day.

• HP Pavilion dv4 - 2070br: Hp pavillion SSD update

  Hello, I bought an SSD of 960 GB Sandisk the amazon link is: http://smile.amazon.com/gp/product/B00M8ABHVQ

  My question is:

  Is there instructions, or things I should be aware, before trying to install this player?

  I intend to my current HARD disk image in this new disc. Is it possible to do? Or do I have to do a new instalation of windows?

  Thanks in advance for your time.

  Vinicius Watzl

  If you plan to install it yourself, I recommend to read the service manual and review procedures necessary to access the drive.
  
  Note: By doing this, you will lose the warranty if you still!

• HP Pavilion dv4 Web Cam does not work after last update SP2

  I downloaded the latest drivers from the HP website, but still no luck. Web cam applications says cannot find a camera.

  Nasir.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 on the link for your Webcam with SP2 problem.

  See you soon.

  Mick Murphy - Microsoft partner

• HP pavilion dv4 1135ee update the bios after that it does not work

  Dears
  I upgraded my Bios from hp.com to restart my laptop now its white screen see the it's not be will start my window. How can I get it please help me thank you

  I m new here

• drivers Windows 7 for HP dv4-1430us requirement...

  Hi, I need drivers pre installed and installers on my dv4-1430us, im planning to upgrade to windows 7...

  Hello

  Here are all the drivers for 64 bit Vista system your to your model. They must also work under Win7.

  If you have installed the official HP Win7 driver wait until October 22. They must be released up to that time.

  Alternatively, you can install a driver with Windows update. All the information about it here or just look for drivers on your sites of hardware vendors.

  If you have still any help let know us.

• dv4-3010tx: installation driver issues and wifi

  Hello ,.

  my model number: dv4-3010tx

  Product name: Pavilion dv4

  My number 1 problem is that my wifi connects to my modem, however it is unbearably slow to the point where it does not load even of any url.

  I'll start with my chipset driver problem

  I installed all the drivers for chipset, besides for INTEL MANAGEMENT ENGINE INTERFACE 6.0.0.EXC because I installed version 7.0 and the installation of driver chipset INTEL TURBO BOOST TECHNOLOGY DRIVER I get the error:

  AN ERROR (5006: 0 X 80070003) HAS CAUSED WHEN RUNNING THIS SETUP PROGRAM. PLEASE MAKE SURE YOU HAVE FINISHED ANY PREVIOUS SETUP AND CLOSED OTHER APPLICATIONS. IF THIS ERROR PERSISTS, PLEASE CONTACT YOUR DEALER. INTEL.

  Error code:-5006: 0 x 80070003
  Error information:
  > SetupNew\SetupDLL.cpp (841)
  pAPP:Intel (R) framework installation
  PVENDOR:Intel
  PGUID:40FEF622 - 6E0F - 46 B - 824 6B - A40C178FD4CD
  $12.0.0.49974
  @Windows XP Service Pack 2 (2600) IE 8.0.7601.17514

  The second problem im seen that may be linked to this chipset do not install it, I have no idea.

  When you install the Realtek LAN (LAN) driver, I get FINDFILE failed error.

  Not sure if it's relevant, but I'll throw a few other information out there. In the device under the OTHER DEVICES tab Manager he listed: "Ethernet controller", "PCI Device" and "unknown device".

  In conclusion, I want to just my internet to work! Thank you for reading! Help!

  Hello:

  I would try the driver chipset from Intel directly on the link below.  Install and reboot.

  https://Downloadcenter.Intel.com/download/20019/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-

  And Yes... If the chipset driver is not installed, which could affect the ethernet driver to not proceed with the installation.

  Also, I would use the new ethernet directly from Realtek driver if you install the above chipset driver.

  3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  PCI device: 1 driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Unknown device has probably need this driver...

  This will install HP 3D DriveGuard, which offers protection for internal laptop disk drive if the computer accidentally falls or suddenly hits another object. This package is available on mobile phones supported with supported operating systems.

  File name: sp53462.exe

  WiFi: Try a newer driver... a 1st on the list on the left side of the Web page.

  https://Downloadcenter.Intel.com/download/23723/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-