updated vista sp2 my dv4 1412tu no sound

Similar Questions

• Update Vista SP2 - lack of File_CSI_0x00000002_\winsxs\x86_microsoft-windows-sidebar_ payload

  When you try to install the Vista SP2 I get errors - following
  (f) lack of payload file CSI 0 x 00000002 \winsxs\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6000.16386_none_cca5e9c129bd0a02\settings.ini Microsoft-Windows-Sidebar, Culture = neutral, Version = 6.0.6000.16386, PublicKeyToken = 31bf3856ad364e35, ProcessorArchitecture = x 86, versionScope = NonSxS
  (f) lack of payload file CSI 0 x 00000002 \winsxs\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6000.16615_none_ccf09e9d29852489\settings.ini Microsoft-Windows-Sidebar, Culture = neutral, Version = 6.0.6000.16615, PublicKeyToken = 31bf3856ad364e35, ProcessorArchitecture = x 86, versionScope = NonSxS
  (f) lack of payload file CSI 0 x 00000002 \winsxs\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6000.20740_none_cd54ca3242bf9973\settings.ini Microsoft-Windows-Sidebar, Culture = neutral, Version = 6.0.6000.20740, PublicKeyToken = 31bf3856ad364e35, ProcessorArchitecture = x 86, versionScope = NonSxS
  (f) lack of payload file CSI 0 x 00000002 \winsxs\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6001.18000_none_cedcabbd26a81ad6\settings.ini Microsoft-Windows-Sidebar, Culture = neutral, Version = 6.0.6001.18000, PublicKeyToken = 31bf3856ad364e35, ProcessorArchitecture = x 86, versionScope = NonSxS

  and
  Found 4 errors
  CSI lack payload Total number of files: 4
  CSI information Total Count: 1

  I tried all the suggestions like running the Mr. Fixit, System tool and downloaded the file and install from my hard drive - nothing works. I bought my laptop with Vista pre-installed and there is no way for to run me a repair, it seems, unless anyone has any suggestions - it seems that I re - install everything from scratch or perhaps upgrade to Windows 7.

  It's the only update that seems to have the problem - as the individual updates through the fine.

  Any suggestion or help would be greatly appreciated.

  You don't want to try a Win7 update with the computer in its current state.
  
  If your computer came with a set of disks, there is a hidden restore partition (not to be confused with the system restore, please) you would use to reinstall Vista.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 800F081F when updated Vista SP2

  Hello. Since the Vista SP2 update came out, I tried to update to SP1 but still, it stops and gives me error code 800F081F.

  I tried to disable and uninstall all antivirus and restart programs but the error comes again. I also tried to download from the Microsoft Web site and using the system update Rediness tool but nothing seems to work. I looked everywere for a response, and the only, that I have not tried, it is this one (http://social.technet.microsoft.com/Forums/en-ZA/itprovistasetup/thread/215d3097-3f40-42e8-bf8d-eefa98c74098) because I don't know what to do if it does not.

  I have 32-bit Windows Vista Home Premium SP1. Can anyone help? Thank you.

  Microsoft technical support services
  http://supportservices.Microsoft.com/support/

  Support services online "free of charge": Virus & malware removal; Virus & malware Microsoft Security Essentials removal; Windows Update
  http://supportservices.Microsoft.com/support/services

• Help, please! blank page in the list of updates (vista SP2) to install company

  Hello, I have a business edition of vista with SP2 and you have a problem to view the updates that must be installed: currently I have a notification of updates 26, but when I click on the link to view this list, I have only a white page!
  Please see below for details and I'll appreciate your help on this issue.

  KR,
  -------------------------------------------------

  2009-12-01 16:59:38:837 1092 918 Agent *.
  2009-12-01 16:59:38:838 1092 918 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2009-12-01 16:59:38:838 1092 918 Agent *.
  2009-12-01 16:59:38:866 1092 12cc to THE > # RETURN # to THE: research updates [CallId = {E714C492-FBD4-4242-B9AF-23A387873ADA}]
  2009-12-01 16:59:38:867 1092 12cc to # 26 updates detected
  2009-12-01 16:59:38:881 1092 918 report REPORT EVENT: {A51BA924-F788-4870-AD30-D95DCDA9058D}-2009-12-01 16:59:38:821 - 0000 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates success software sync Windows Update Client detected successfully 26 updates.
  2009-12-01 16:59:38:881 1092 918 CWERReporter finish event management report. (00000000)
  2009-12-01 16:59:38:882 1092 918 CWERReporter finish event management report. (00000000)
  2009-12-01 16:59:38:957 1092 12cc to THE #.
  2009-12-01 16:59:38:957 1092 12cc to # END # in THE: research updates [CallId = {E714C492-FBD4-4242-B9AF-23A387873ADA}]
  2009-12-01 16:59:38:957 1092 12cc to THE #.
  2009-12-01 16:59:38:981 1092 12cc to THE #.
  2009-12-01 16:59:38:981 1092 12cc to THE # START # to THE: updating of information updated featured
  2009-12-01 16:59:38:981 1092 12cc to THE #.
  2009-12-01 16:59:38:981 1092 12cc to no. feature updates available.
  2009-12-01 16:59:38:981 1092 12cc to THE #.
  2009-12-01 16:59:38:981 1092 12cc to # END # in THE: updating of information updated featured
  2009-12-01 16:59:38:981 1092 12cc to THE #.
  2009-12-01 16:59:38:982 1092 12cc to THE timeout parameter next detection at 2009-12-02 13:48:11
  2009-12-01 16:59:38:982 1092 12cc setting of to THE pending client directive to 'install approval. "
  2009-12-01 16:59:43:835 1092 918 CWERReporter finish event management report. (00000000)
  2009-12-01 16:59:54:182 1092 launched CE4 again to THE client for directive 'Install approval', session id = 0x1
  2009-12-01 20:00:55:866 1092 16 c 4 putting featured update notifications.  fIncludeDismissed = true
  2009-12-01 20:00:55:866 1092 16 c to THE star no. 4 updates available.
  2009-12-01 20:01:07:235 1092 16 c 4 putting featured update notifications.  fIncludeDismissed = true
  2009-12-01 20:01:07:235 1092 16 c to THE star no. 4 updates available.

  Hi Tati70,

  Welcome to the Microsoft Answers site!

  (1) what is the version of Internet Explorer you are using?

  This problem can occur for several reasons. You may experience this problem if one or more of the following conditions are met:

  > Internet Explorer settings may be incorrect.

  > Some third party such as antivirus programs, firewall and accelerators Web applications adversely affect the ability of your computer to connect to the Windows Update Web site.

  > Internet Explorer damaged or incompatible settings can prevent you from accessing Windows Update.

  You can reset Internet Explorer and see if that can solve the problem.

  Warning: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered. Rather than reset, you can reset the settings or delete your webpage history. For more information, see the links at the bottom of this topic.

  You can access the links below and use the tool to reset the version of Internet Explorer you are using.

  Reset Internet Explorer version 7:

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings

  Reset Internet Explorer version 8:

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings

  Let us know if the problem is solved or for help

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Can't update Vista SP2

  I am running Vista Ultimate 64-bit, who tried to install SP2 yesterday. The first time I tried installing my antivirus (Bitdefender IS 2009) picked up to (false positives due to the SP2) and quarantined them. I know I should have disabled the anti-virus before installing, so I got to before installation and brought the quarantined files. Now after installation for the second time, when Vista boots, I get a black screen of hanging showing:

  !! 0xc0000034! 7606/76472 (amd64_microsoft-windows-d.. pwindowmanager...)

  This error is identical to the first time I tried to install it.

  Hello Mohan

  Thank you. I probably didn't explain it very well but I did the restore previously. Restore restores obviously to SP2 before updating then after that I got the error the first time I did a restore, I disabled the antivirus and tried to reinstall SP2, make the same mistake. My question is what should I do before installing SP2, so it succeeds and I do not get the error.

  Anyway, I finally managed to install SP2 third time lucky) after action more for no antivirus process were running and returning to the windows firewall. I have disabled all Bitdefender 2009 protection (real-time protection, etc.) parameters General and unchecked "Run Bitdefender at startup. Then after rebooting my machine, I was able to install SP2.

  Concerning
  Greg

• "Review updates" Vista sp2 page does not load.

  My computer has windows Vista Home Premium sp2 32 x and updates are checked for every day. There are 2 updates important and 2 Optional updates listed at this time. When I try to "review updates" category either important or optional page does not load. It is a problem for several months now. I wonder what are these updates and why I am not able to view them. I am the administrator and the only user of this computer. It's not part of a corporation, company or home network...

  Hello

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  I would temporarily disable all security software and check if the problem persists.

   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

• Adobe 10 will not update, Vista SP2

  Adobe 10 will not work. I spent days going through the recommendations to support. I did all the patches more than once. I've started and restarted. I checked and rechecked the settings. I disabled protection programs. I did manual downloads. I uninstalled and reinstalled. The update will not work. It seems to install okay, that displays as if everything did install OK, but I don't see "Adobe page" version not display; nor can I view independent web videos (vids play fine to an e-mail using Windows Media Player link).

  Please - someone - help? I'm an average user, please go easy on me.

  Internet explore 8

  MS Vista Home Premium SP2

  PC x 86

  Windows System 32

  Hey find that vnc dot com (without the dot) and remove it first, then files. If these are system files as you say, so if you are still working with MS, tell them about this. They can access your pc and take care of her. If this isn't the case, then I will do the research on this. At least when MS connects, they log off :-) Yes, it could be the cause of your questions/Windows blue screen. I see no reason to keep anything on your computer that you don't need or use.

  These ads are quite normal spamming. I pointed out also, so tomorrow this post probably won't be there :-)

  I don't want to rest, but to plan downloading some programs from my laptop first and relax!

  Oh, this idea of vnc to my family and friends, hmmmm, maybe.

  Thank you

  eidnolb

• 800736B 2 of error Code woes. Windows Update (Vista SP2) fails to install a bunch of updates

  I know that this problem was posted a lot everywhere on the internet (even here), but I would like to explain a little better than everyone else and maybe I can somehow get to the bottom of this.

  The problem:

  I am trying to update my acer 4/5 years, grandfathers aspire running Windows Vista. Whenever I try to install the following updates:

  http://i.imgur.com/SBxv8.jpg

  I get 6 updates installation failed with error code 800736B 2. When I turn the computer off, he pretended to go through the process of 'completion' facilities update 6 (you know what I mean, it says after that windows has disconnected the user is installing updates). It takes about 15 minutes, then when I re - turn on the computer and check the updates again the exact same updates are always listed.

  The attempts of a solution:

  I downloaded and used the update tool for Windows Vista (http://support.microsoft.com/kb/947821) system. It shows the exact symptoms of the same as the rest of the updates. It "installs" (which lasts about an hour. Said it was successful. Then I restart the computer, it 'full' Update 1 on 1 which have been installed, when I opened the tool (after reboot), it says that I have to reinstall the same update (KB947821). So obviously it cannot be installed but for some reason any thought that he didn't.

  I also tried to run this tool in safe mode and had an error that says that I can't run it in safe mode. Sweet.

  I wanted to download the updates manually (I was hoping that they would be in the form of some .exe or something) then run their safe mode, since you can't use windows update in safe mode. I looked around online a lot, but could not find a way to download the updates manually. I found a bunch of guides tell me how to do, but non of them work. My guess is that they removed the support for it.

  If anyone has any ideas as to what I can do without having to reinstall windows it would be awesome. My grandfather is really exhausted all of this current vista installation so wipe everying is probably a bad idea. I would like to avoid it at all costs.

  Hello

  You can try the steps in this KB http://support.microsoft.com/kb/883825 for a similar error, but others indicated that they were able to solve this problem by using the KB.

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• What should be the file size of Vista SP2 through Windows Update If SP1 is already installed?

  Hello

  Please could someone clarify this? I read on a few messages that if Vista SP1 is already installed then the Vista SP2 update file size should be around 40-50 MB.

  I checked manually through Windows Update > check for updates. He finds updated Vista SP2, but the file size is of approximately of 340-350 MB.

  Thanks in advance for your suggestions.

  http://TechNet.Microsoft.com/en-us/library/dd335036.aspx

  Indicates that there should be ~ 43meg for 32-bit and ~ 60meg for 64 bit.

  It can be substantially larger depending on how many updates between SP1 and SP2 are not already installed. Microsoft partner

• Try to install on Vista SP2 KB915597, getting error code 80070670

  Hello

  I tried to update Vista SP2 (with Ko 915597 - an update for the Defender) however it returns an error code of 80070670. What happened two or three times last week. Every time the patch installed ok afterwards. However, it is of course a problem somewhere, but where? I tried to search on the code of error on the net + of this Web site, but nothing helped.

  In addition, Windows stops also recognize my Creative Zen MP3 player. In Device Manager, it appears as an MTP device with a yellow exclamation point and a "this device cannot start (Code 10)". I've especially tried to Fix It, but this requires Windows PowerShell (928439 KB) must be installed and it also settled with a 80070005 error code.

  Sorry if the last piece of info belongs to another forum, but I believe that the problems are related (the same?).

  Hope someone can help, as I'm getting a little frustrated.

  Thank you and best regards
  Martin

  Original title: error code 80070670 (under Vista SP2)

  Hi Robear,
  I disabled Defender because the 3rd party software that I use was recommended to me as being superior to the Defender. But maybe this recommendation is outdated? I disabled Defender during my first installation of Vista, and 'yes' I have updated Defender on the first day without problems so far.

  By the way my system has just updated this morning without any problems with three updates for Vista and one for the office.

  Thank you for your efforts to help me beat this problem,
  Martin

• Update Vista 64 Bit SP 2 remove icons from the taskbar for the power and sound.

  When I installed the update to Vista SP2, my power and Volume icons disappeared from the taskbar. When I went to set the display for the Menu Taskbar properties, the option to do so is grayed out.  Go to the control panel to change the power options, it's annoying, but I can live with that because I do not often change. But having to go through the control panel to adjust the volume is a container of the slow cooker. How to view again?

  Hi old giza,.

  Thank you for using answers Forum.

  I suggest you to re - install the driver for your sound card, this should restore function.

  You can also consult the Web site of the manufacturer for an updated Vista driver.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't hear any sound in my headset when I plug in my laptop which has Vista SP2 installed.

  I can't hear any sound in my headset when I plug in my laptop which has Vista SP2 installed. While my speakers work well, I cannot hear any sound in my headphones every time that I plug them in. And whenever I take off the helmet, I can hear clearly. However the same headphones work with another machine perfectly. I tried all the troubleshooting guides, but can't get my headphones to work with my laptop. Appreciate if a solution can be provided.

  Hi reddys_b,

  1 have. what measures you tried to solve the problem?

  2 are you using a USB one or one that has a microphone or headset right?

  Step 1: Start by checking if the default sound device is set correctly.

  a. Click Start type sound in the box start the search.

  b. click sound in the results of search at the top of the start menu.

  c. click the reading notice the check mark next to the default device. For most users, the default device is speakers. Change the default device with headphones.

  d. Select the audio device you want to the default audio device and then click on set as default.

  e. click OK to save your settings and close the sound dialog box.

  Step 2:

  You can also try updating the sound card drivers and check.

  For more information, you can consult the following link:

  Tips for solving common audio problems

  http://windowshelp.Microsoft.com/Windows/en-us/help/1e87a3e8-c0e8-49af-980F-9eb6686f42d21033.mspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound after installing Windows Vista SP2

  Vista service pack 2 and the loss of its

  Windows vista 32 bit
  I installed vista service pack 2 update and lost sound, I restored my computer to service pack 2 and sound istalling pre was there. I have re-installed now update sevice pack 2 and its missing again. It's the same with service pack 1 and I had to restore my computer to factory settings to retrieve the sound. I really don't want to have to do it again.
  I tried the microsoft fix that says everything is fine. I've done all the things suggested on troubleshooting audio from vista - still no sound. My internet explore keeps reloading when I don't have service pack 2 installed.
  What can I do to fix this?

  Like Nettie63, after SP2 has been installed, my sound on the left and the utility 'fix it' said everything of fine.  I tried the fix above with the research of STacSV64.exe that by pasting into the search bar.  However, he said that there was no file so I couldn't just double-click on it.

  What do you recommend?   Thank you very much.

  =====================================
  Have you tried all the suggestions in the following articles:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  (948491) how to troubleshoot sound
  problems that you experience after having
  install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481/

  (948465) information about Service Pack 2
  for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Sound stops and slows down after the installation of Microsoft Vista SP2

  Its malfunction after installing Microsoft Visa SP2

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  Here's a thread on these forums on how to fix this: http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/f16247af-313a-418d-915e-6403012c25eb

• Tecra M9-136 - BSOD during Vista SP2 update

  Tecra M9-136 asked this morning to upgrade to the Vista SP2 and in the process the BSOD 0x0000007E arrived. Restarted in Mode safe and continuous Setup and then finally reported that the update failed - and came back to SP1. It took most of the morning.

  It will start in Safe Mode, but on a start normal, Vista SP1 gets through fingerprint recognition and then fails with the same BSOD (there is regarding the display of the desktop).

  The laptop has BIOS 1.80 level. I tried in safe mode to install 1.90 but he told me that the battery has insufficient charge and the AC adapter is not attached. Both wrong.

  Stuck - need advice. Could this be a hard failure? Can't see how I can update whatever it is if it's a soft fault.
  Thank you

  Have you tried to make back the OS to an earlier time before the SP2 installation started?
  You can do it in safe mode.