Update of the modules of RAM on dv4-2145dx

Similar Questions

• Update of the modules of RAM for my desktop pc

  I want to buy G.Skill Ares RAM for my HP Pavilion G5460uk. The specs are below the RAM

  Model number

  Yes, memory G. Skill you watch should work. This would allow your system with 8 GB of RAM.

  Please send Bravo

• How to install the module of RAM of Tecra M1

  Hey

  Where can I find where to install the RAM on my Tecra M1?

  Hello

  Memory modules are hidden under the keyboard.
  You need to remove the keyboard first to get access to the memory modules.

  The keyboard is fixed with two screws behind the plastic cover thin above the row of keys F1 - F12.
  After the screws have been removed you can lift the keyboard and could remove the modules.

  But beware: the insulation covers the memory locations. You will need to attend the insulation first.

  Concerning

• Satellite A200-1CR does not recognize the module of RAM 2 GB

  Hello

  I have a problem with the extension of the RAM.
  I have the Satellite A200-1CR with 2 x 512 MB of RAM.

  Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
  When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
  Where is the problem?

  What should I do to make it see 2 GB?

  Paula

  Hello

  I think the answer is very simple.
  Satellite A200-1CR can be upgraded up to 2 GB of RAM.
  This means that you can use max 1 GB of RAM in one slot
  You used 2 GB of RAM and this module does not seem to be compatible
  In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

  Welcome them

• Satellite Z930 - after the update of the BIOS, additional RAM no longer works

  I bought my Z930 Satellite in August and installed 2 GB of additional RAM in it. Worked well, the Ultrabook detected and had total 6 GB of RAM.
  Yesterday, I stopped ignoring these messages from Toshiba Tempro and installed the BIOS update suggested that Bios 2.20 (not sure what version it was before). Now, I have several problems:

  * First *, my Ultrabook no longer starts with the extra RAM. I press the power button and then the power light flashes: yellow 2 times 1 times orange loop. The screen stays black and the CPU fan starts at the maximum level... Only when I remove the extra RAM, then it boots.

  * Second problem *, without my extra RAM, it starts, but sometimes with the fan from the CPU to the maximum level. I so restart it stops.

  * Third problem *, Windows doesn't detect only 2 GB of RAM. I have now no extra RAM mounted, it should detect the 4 GB of RAM, as when I bought it. Now, there are only 2 GB...

  So this is what happens when I install the proposed updates? -.-
  So, what can I do now? At least, I want my preinstalled 4 GB of RAm back. Is there a BIOS downgrade, or something similar to undo changes?

  Thanks for the final suggestions!

• NB200 - only little difference in speed between the modules of RAM?

  Hello everyone,

  Recently installed Windows 7 on my NB200 and thought I would setup an extra RAM.

  The RAM only I could get, was 2 GB of 667 MHz, as opposed to the 800 MHz supplied with the NB200. I thought that double the RAM would more than offset the slight difference in mhz between the new and old Rams.

  As I understand it, it's only little practice speed difference of real world, between the 667 MHz and 800 MHz RAM, is - this correct?

  Also: The 2 GB of RAM, I had had twice the amount of chips on the RAM slot than the old. Should I be concerned? I'm worried that doubles the amount of chips in a little place could lead to problems of heat/cooling... Any opinions?

  Thank you!

  There is no much difference between 667 and 800, in fact, I think the CPU at 667 anyway, but 800 races comes because of the limited availability of 667 RAM.

  Cooling should not be a problem if the RAM uses the same calendar and turn at the same voltage as the original of the RAM.

• Update of the modules for security issues ESX service console

  Today, I was asked a question on the vervsion of OpenSSH used on the service console for our environment vSphere 4.0. Apparently, there is a vulnerability in OpenSSH 5.6/7 with a certificate which has been corrected in version 5.8. My response to the security team has been we are the 4.3.p2 and as a result, this issue does not concern us. So the following questions then becomes why you are not in the latest version?

  I'm curious to know if someone has already discussed with VMware on these types of security issues where the components used by RHEL, like OpenSSH, are vulnerable. What was their response to attempts to update this kind of things? I guess some of the answers would not be supported, you'll break, if you patch it's no guarantee your fix will not get downgraded, etc..

  I'm looking for is a solid answer that explains why we do not have that kind of stuff to ESX, only when VMware provides the fix. I could contact the support, but I thought her first check and see what others have met.

  Thank you

  Hello.

  I think that all the reasons you mentioned (not supported, you're going to break, if you patch it's no guarantee your fix will not get downgraded, etc.) are pretty much true.  The ESX 4.1 Patch Management Guide stated in the FAQ section:

  When a rpm on my ESX host has an equivalent Linux, can I use the Linux RPM to upgrade my system?
  N ° VMware recommends that you update your host ESX 4.1 with RPM provided by VMware.

  An answer I could use would be to take a step back to look at the bigger picture.  Is a SSH, which should be secluded/protected to some extent in a first time, have a vulnerability more risky than having an ESX host unstable/not supported with X number of VMS running on it.

  Good luck!

• Update of the BIOS Satellite L500-13W

  I've recently updated the bios of my computer because I can't use 1 RAM module
  I waited for the bios to flash then shutted down and when I tried to turn it on it woulnt boot up... I had only a black screen and FAN running on LOW-END system... I romeved 1 Module RAM and gave it a try (with 1 single module of RAM) and it started and I shutted down the calculated and reinserted the Module of RAM (now with 2 RAM Modules) and it now it start again... Only, I can start my computer with 1RAM Module only...
  Can someone help me?

  It's very strange. Do you use original RAM modules that you got with your laptop?

• Satellite A100-014 can't module of RAM PC2-4200 or PC2-4300

  Hello guys and girls,

  I have two modules of RAM memory installed on my toshiba a100-014. They are the two PC2-4200. However, CPU - Z which is a small software that helps out to discover what are the specifications of the hardware on your computer, says I have two PC2-4300. Isn't it funny?

  Why you think that CPU - Z does not recognize the RAM modules I have installed? Moreover, the machine works perfectly!

  Hello

  This software is not for me. I use Everest professional. It s also a hardware diagnostic application.
  But you the modules of RAM. Satellite A100-014 has been delivered with a module of 1 GB DDR2-533 (PA3411U-2M1G) and it s definitely a PC2-4300

• Video not download the module

  Dear support team,

  I downloaded two modules with videos, but now whenever I have try and create a new module and upload a video to the download screen remains at 0% and nothing will post.

  I asked him the maximum size of each video, which can be downloaded and was informed that it should not exceed 600 MB. But now, even if they are less than 600 MB, I am still unable to download these. Kindly advice what to do.

  Thank you

  Best regards

  Hala Alturki

  Hello

  My apologies for the issues that you are facing while downloading and updating of the modules first. We will have to review the module and check the issue. I you send a private message with our contact information. Please reply and we will contact you and help you with the problem.

  Kind regards

  MILIN

• BIOS update allows the use of modules of 2 GB RAM DDR on Satellite P10 554?

  Hello

  I have a satellite p10 554 and want upgrad my RAM.
  By default, the maximum that you can install's two Kits of GB 1.
  Are there any - update Bios, that allows 2 GB kits?
  Thank you very much!

  Ron

  Hello Ron

  The same situation with my P20! Unfortunately there is no BIOS update allows the use of the RAM more.

• Satellite L30 - 10Y black at startup the screen upward after the installation of new modules of RAM

  Hello

  I use the L30 - 10Y model with the following memory specification:

  standard: 512 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM (533 MHz)
  expansion module sizes: 256, 512, 1 024 MB

  I use Windows Vista Home Basic Edition with a 32-bit operating system.

  When installing, I removed the standard 512 MB module and added 2 modules of 1 GB compatible. At startup, it stays on a black screen.

  However, if I removed 1 1 GB modules and put the old 512 MB module to give me 1.5 GB, it works.

  I was wondering if anyone knows why this is and if there is anything that I can try to get the maximum of 2 gb, if it is indeed possible.

  Thanks in advance.

  According to the product page Toshiba Satellite L30 - 10Y is able to manage 2 GB of RAM (2 x 1 GB)
  I think that the problem is related to memory modules not fully compatible
  I think a new, fully compatible RAM modules should resolve this problem.

  PS: You updated the BIOS? If this is not the case, check if a new update of the BIOS is available on the European driver Toshiba page.

• Satellite L20-100 - what modules of RAM can I use for the upgrade?

  Hi all

  I have TOSHIBA Satellite L20-100 and I need to upgrade the ram memory up to 2 GB.
  I found these models on the internet but I don't know that it is compatible with my computer laptop or not.

  the following module on the eBay store:

  * 1 GB Kingston DDR2 667 Mhz 1 GB DDR laptop 2 NB RAM *.
  * Hynix 1 GB RAM DDR2 5300 s - computer notebook memory 667 MHz *.
  * ASint 1 GB DDR2-667 PC2-5300 PORTABLE 200 pin MEMORY *.

  Already now I have 512 DDR2 667 Mhz

  Or any knows from where can I update the correct RAM?

  Hello

  Theoretically, you can use all modules store because all the modules to meet specifications, DDR2-RAM, 1 GB, etc. for example.

  In your case, I'd take the Kingston RAM. I've never heard ASint RAM, but I have good experiences with RAM Kingston. I always use Kingston RAM to upgrade my notebooks and never had any problems.

  Last but not least, you can also buy RAM of an authorized service provider.

  Good bye

• Dv4-1120us bricked by update of the HP Bios

  Frédérique put I went to update the bios on my laptop as I previously without incident.  Well this time the update downloaded, installed and turned off Windows Vista 64-bit SP1.  After that nothing! The lights of power will light up, but that's all.  No HP, no MSFT screen no screen no nothing.  Honestly, I think that it is a bios update due to the update of the HP. It's the update, I installed: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67379-1&lc=en&dlc=en&cc=us&...   Long story short HP support chat session has been very helpful and I will send a box to air next day prepaid to ship at his own expense to solve this problem.  Comments are welcome, but I highly recommend anyone with this laptop not to install this update! I have taken out the battery, dethroned the ram and others without any result.  I hope they can fix.

  LordVader311
  "The power of the dark side!

  lordvader311, many of us brick already our dv4s with the last update of the bios HP but you can fix it yourself in a few minutes as follows

  BTW, the credit for this goes to PONGSTER who told us all that...

  Change Note:

  I edited the steps for the dv4-1140GO users. Moreover, the 1125nr, 1140go and the CQ45 seem to share the same room, as they use the exact same application BIOS flashing.  This bodes well for those of you who need to get theire fixed dv4, instead of send for repairs.  Don't forget, if you missed your BIOS, sending in for repairs is not the only solution, I discovered, after searching for all possible solutions.  Do the following before you send anything in repairs

  I have a dv4-1125nr.  I'm not sure this will help, but you may as well try it before your sending for repair.  I have corrected my messed up BIOS update by following the exact steps, I'll describe here.  There is hope, and you don't need to have your motherboard replaced.  Just follow the instructions and you should be typing on your dv4 in no time.  It took me about 10 minutes, senior, to get all this fact.

  Here we go:

  Good... Here are the exact steps I took to get my dv4 back in working order after a failed update BIOS using HPbuggy update (I just had to repeat what we already know... ) I simply cut and paste of 0,0 steps, so all credit goes to him and the engineering on this forum (http://forum.notebookreview.com/showthread.php?t=340079&page=3) (Bigozone) Acer section

  Here's the exact model number and general specifications: dv4-1125nr, Intel Integrated Graphics 4500, blah-blah-blah-blah (all I had to determine was update the BIOS was necessary for my dv4 with integrated... graphics card later)

  1. go to this site: http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2100&lc=en&dlc=en&cc=us&lang=en&product=3795301 and download the file: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41969.exe

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. I used a 128 MB USB Thumbdrive (the smallest I could find, because they said the smaller the better ) and reformatted as FAT (by default) in Vista by clicking with the right button on the drive and clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  5. If you have the graphics card Intel integrated like me, copy the 30F7F24U. FD to the key USB and RENAME the file 30F7F24U. FD to 30F7. BIN

  NOTE: the file 30F7F24U. FD is for those who have the Intel 4500 integrated video, while 30F7F24D. FD is for those who have the Nvida graphics.

  Copy the appropriate file on the USB key, and then on the USB, rename it to 30F7. BIN

  The next steps are to 0,0 exact steps, which I simply numbered him: (please follow the correct procedures here and 5 minutes from now, you'll be typing a response to this post on your currently borked dv4 )

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.
  BIOS worked normally thereafter.

  My last step:

  17. dance of joy! Hehehe these instructions should be on the HP site, since they do not seem to bother to test the updates they push users (here I go again!)

  Hope this helps all of us (it will help me when I mess up my BIOS Flash... hehehe)

  Message edited by DJK on 01/13/2009 17:32

• I've updated to 10 FF and my RealDownloader module is disabled. I can't test it when the module is disabled.

  I can't properly test the latest version of RealDownloader; the module is disabled in FF 10. I have the latest version of RealDownloader, in which the incompatibility with FF10 is supposed to be fixed.

  Update to the latest version to get a version of the extension Plugin RealPlayer Record of the browser that is compatible with Firefox RealPlayer 10.