Update API causes to R12

Similar Questions

• Realtek 8185 Driver Windows Update installation causes system crash

  Install the Realtek 8185 Extensible 802. 11b / g wireless listed device driver as optional in windows update in windows 7 ultimate 64 bit results BSOD and system becomes unable to boot (System Restore will fix it).

  I am writing this to see if it is a special situation with my system or if it's a widespread problem, the following driver Details.

  Camera works great with the default driver, so if someone is going to tell me do not install this driver and look for another who is not the issue. Problem is that this driver in Windows update will cause the crash (BSOD) and system does not start until the restoration of the system is used.

  System Specs:
  OS: Windows 7 RTM x 64 Ultimate (new installation)
  P: AMD X 3 720
  M: 4 GB DDR3
  VC: GTX 260
  MB: Gygabyte MA790XT-UD4P
  (Related to the problem) wireless adapter: Realtek 8185 Extensible 802. 11b / g Wireless Device

  Driver details:
  Realtek Semiconductor Corp. - network - Realtek 8185 Extensible 802. 11b / g Wireless Device

  Download size: 409 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Software update of Realtek Semiconductor Corp. network released in September 2009

  More information:
  http://winqual.Microsoft.com/support/?DriverID=20298246

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  Hello

  You must go to Realtek and get the current driver, it works fine on my system. Do not do it just
  means that you're stuck in the loop, you're in and the pilot trying to update Windows Installer is a
  an old man just certified for Windows (MS is far behind the pilot certification and accreditation is not
  means that they work properly).

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• Open the Interface & API available in R12

  Please share metalink reference for Interface noteId open & API available in R12

  Hi Arya,

  For 11i:
  http://IREP.Oracle.com/index.html

  For R12, you can check the API using responsibility "the integration repository.

  See you soon,.
  Vigneswar

• API to update the PART in R12

  Hi all
  
  could you please provide me with the API to update the information of GROUP of R12.
  
  
  Thank you
  Aush

  Try:

  HZ_PARTY_V2PUB.update_person
  HZ_PARTY_V2PUB.update_group
  HZ_PARTY_V2PUB.update_organization

  It will be useful.

• Update API categories missing categoryTypeId

  I would be very interested to understand why BC development team suddenly pulled out of the field of categoryTypeId according to the results of the API.

  I welcome the new features of update or remove, but this suppression of field threw a key in my works.

  Basically, the field CategoryTypeId indicates the 'level' of a particular category in British Colombia. (42 = Level1, Level2 43 = 140 = Level3, etc..)

  (By the way, I would be curious to know why 42, 43 and 140 have been chosen rather than saying: 1,2,3... but I digress.)

  
  

  In any case, I was using the field CategoryTypeId to create a game from the category "cascading" selects as shown below:

  (i.e., you select a directory in the first select statement and the second, select appears containing the next level of categories filtered for this selection of repertoire and so forth.)

  {resource module_data = 'categories' version = "v3" collection model = 'directories' = "" where = "------{'categoryTypeId': '42'------}"}

  {resource module_data = 'categories' version = "v3" collection = "categories" template = "" where = "------{'categoryTypeId': '43'------}"}

  {resource module_data = 'categories' version = "v3" collection model = "subcategories" = "" where = "------{'categoryTypeId': '140'------}"}

  I wrote a JS function which makes the display and hiding the results filtered out of the screening.

  My big problem is the update today, which has removed this field.  Assuming that there is currently no way to put this back, I'd be happy to explain why it has been deleted, as this caused me suddenly having to redefine the component architecture key of the user interface of the site.

  In addition, I'd also appreciate ideas as to how this might be accomplished another way (easily?) using other fields and/or {categorylist}

  Thank you

  -Bruce

  Hi Bruce,.

  I'm really sorry for this bug. We will reintroduce this field tomorrow until the end of the day. I don't know how the values where chosen for categoryTypeId but another question.

  Again, I apologize for this issue.

  Kind regards

  Radu

• Will be updated IOS cause carrier unlocked Iphone to lock again?

  Hello guys,.

  I bought an unlocked iPhone from carrier 6s more Craigslist, I want to updated my IOS to the latest version but I read somewhere that update caused phones locked out there so I'm worried about the update, anyone of you guys do you have experience updating a carrier unlocked iPhone? is it safe to update?

  Thank you.

  Update an iPhone that was originally sold as unlocked or is released by the carrier will not be it relock.

  Update an iPhone that was unlocked by jailbreaking it can cause to be closed or other problems.

  (143370)

• After updating Windows, causing KB981957 XP BSOD, C000021a Service Control Manager error at startup in safe and normal mode.

  After you apply this update, the system starts more (secure or normal) and gives the BSOD error above.  Manual removal of the patch Recovery Console fix the BSOD using batch spuninst.txt in the patch folder.  The affected system is an AMD Athlon 2400 + with 2 GB of RAM and XP SP3.  All other updates installs successfully.  I scanned viruses with Avast, Dr Web CureIt, ComboFix, Malwarebytes and TDSSKiller.  The system seems to work fine without the update.

  It seems to be a problem with the Win32k.sys file in the patch, but I ran out of utilities to solve this problem.

  Hello

  The solution is to report the problem, so the update can be set to not to do so. Microsoft
  may already be a fix, or work on it, or it could be a new problem. He
  There's even a phone number to make it easier.

  Certainly keep good backups that there could be an underlying hard disk or hardware
  issue.

  ========================================================

  Here is the solution for the coooo21A except use it when you can just get the fixed update
  is not the method I want to use.

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the WindowsAdvanced Options menu that results, select thelast known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Update Vista caused internet connection problems

  I have tried repairing computer of my sister, who says simply ceased to connect to the internet all of a sudden.  She said that began February 1... After looking through the system restore, I noticed there was an update installed on 31 January, so I restored the computer to the day prior to that, and now the internet works again.  Since then, I have disabled the automatic updates.  My question is: How can I solve this problem?  I can't leave just for always updates disabled...

  Hello
   
  Please can you us on the update that is causing this issue?
   
  This problem occurs especially if there is a conflict between the update and the application program on your computer, mainly the antivirus program.
   
  That's why I suggest to disable and re-enable the antivirus program or the security on your computer and try to update the verification of updates if the problem is resolved.
  Ensure that you re - activate the security on your computer program after a repair.
   
  Try here to reset windows update components and then try to install the updates.
   
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Also, I recommend you to uninstall and reinstall the network drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and
  Maintenance and then click Device Manager. If you are prompted for an administrator
  password or confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on uninstall the driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also try to troubleshoot using the network troubleshooter in Windows 7 and make sure that the error message to follow the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Svchost 100% Windows Update the cause

  From my own post about my problem after taking the post similar here.

  I have a Panasonic Toughbook, running Microsoft Windows XP Tablet PC Edition 2005, Version 2002, Service Pack 3. I use Microsoft Security Essentials antivirus. This toughbook gets used to work.

  Noticed the last time I turned it on it, he crawled and was unusable. Today I spent some time with it and noticed the process svchost.exe takes 99% CPU. I have narrowed it down to the service of automatic updates which is the cause and I was also impossible to obtain updates through Windows Update with the right bar from green back and forth endless progression.

  First of all, in the Windows Task Manager, I've selected display, select columns and checked the PID (process identifier). It showed me which instance of svchost was using all of the CPU, PID 1060 (although this PID is probably different on different machines)

  Secondly, I opened a command prompt and ran: tasklist/SVC

  In the list, I looked at used 1060 PID and invalidates them one at a time by services.msc services

  Disabling automatic updates service immediately set the svchost using all CPUS.

  Recheck the tasklist/SVC watch the wuauserv (automatic update service) was the only service missing PID 1060 for the svchost problem.

  I think I found the solution at the moment. I was brought to him a post on another forum.

  The solution was to install the last update of security for IE8 (KB2879017). You can find and download at http://www.microsoft.com/en-us/download/details.aspx?id=40390.

• How to remove an update that causes web pages not to load - think its KB2722913

  main computer, a Dell Dimension 8300 running Windows XP 2002 Pro w / ServicePack 3, automatic updates ran Thursday, August 16 at shutdown.
  Updates installed; KB2705219, KB2731847, KB2712808 and KB2722913

  Then used the computer on Saturday and could not connect to the internet - error message;  Server not found. Same message for IE and Firefox.

  Called my ISP tech - checked modem, router and computer support all the good packages and trade.  He informed me that Microsoft place caused the same problem in some other Microsoft OSs.

  I have four connected computer and the only one not going is not in the net is updated.  Two entrances, two wireless.

  I checked all the device drivers and they are good.
  Auditor up-to-date virus and system is clean.

  After having read the bio on updates, consider KB2722913.

  How can I remove it?  Cannot access the internet, so it will be manual or a file can I down loaded, put a closing Flash and install/run on the Dell computer.

  Thank you
  Ken J

  Apparently it is not KB2722913 as you later deleted and your problem remained.

  I don't see KB2723135 in your list. It's curious, because he was in the most recent batch of security fixes... Come back to this one.
  I have a feeling that you have malware. Have but before turn us to that, you installed the OPTIONAL updates? (They can often destroy a system.)
  What is your program antivirus or suite? Maybe it's a clue.
  That's what I'd do:
  Uninstall the other updates you have downloaded and installed the 16. (Of course, you ultimately need to reinstall.)
  Set to zero if necessary.
  Run the system restore, selecting the 15 August.
  The reason for this is that you know that everything SEEMED to be there now.
  Then report.

• Sometimes when a windows update it causes problems with my photosmart c4795 printer. Usually making it unable to find or may not be usable.

  problems with windows update problems with my printer causeing

  Hi Virgil13,

  · You receive an exact error message or error code?

  · What is the operating system installed on your computer?

  Run the fix it from the link below and check off the results: printing problems and printing errors:http://support.microsoft.com/gp/printing_problems

  Also check the installed updates:

  a. open Control Panel from the start menu

  b. Select programs and features

  c. click View installed upgrading

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update KB3069114 causes a blue screen Vista

  The latest updates for Windows from September 2015 started causing blue screens on my Vista desktop, and after repeating uninstall and reinstall I think, that the problem is caused by KB3069114.

  All this experience?

  Any chance of a fix for the problem in the near future?

  I just downloaded and installed the latest driver for my graphics card. I hope that the plant will be gone now [after] KB3069114 installation.

  I would like to know what happens, OK?

• Update problems causing several problems.

  First-

  I received notice that Windows cannot be updated for some time. I tried the fix where I am to empty a folder and reset it according to the instructions in the menu help. THST didn't work, so I found a forced update on a MS site that was supposed to force the update. Instead to get the update, I now get messages saying that the version of windows vista, I have perhaps not valid now. How can I fix it?

  Second-

  I was able to live with the frustration above until today when I tried to install my new MS Office Home and Student 2010 and kept getting Error 1935 with an Hresult: 0 x 8007002. Fix management, I found that all suggest that I did do the same thing I did for my problem above but has never worked.

  Third-

  On the start-up of already 5 or 6 (apparently not regularly), I get the "blue screen" which tells me that I have not a valid operating system.

  I had friends from tech tell me that these are known issues with Vista Ultimate and all I have to do is call the 1-800 number MS, explain the issues, and that MS can make a correction. This 1-800 number seems to be eluding me (if such a number exists). I am also told that all these problems are caused by the same problem.

  Advice?

  First-

  This KB mention Error 1935 at the base of the page

  http://support.Microsoft.com/kb/946414>

  In addition, see MVP MowGreen response to a previous post, involving the error:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/efede128-0abb-4CD5-a8d6-65d5311db87f>

  Second-

  0 x 80070020 -2147024864 STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process

  http://support.Microsoft.com/kb/883825>

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

  Third-

  Boost telephone:

  Activate Windows manually:

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. Select the telephone activation option and brace yourself for a real person.

  UTC/GMT is 04:16 Thursday, January 12, 2012

• New update WLE causes problems after installing in Windows Live Mail.

  Now, I tried 3 times to install the latest update of Windows Live Essentials.  Whenever reports installation completed successfully, but when I try to creae or reply to an email from Windows live mail, I get a big box with a red border, with a lot of gibberish techno on the attachment of a debugger and give me the options retry, cancel or ignore.  Retry waiting attach a debugger (which I did not), the other two cause windows live mail to close.  The only way to regain control seems to be a system restore.  I'm very happy to do without the update, but I want to get rid of the system tray notification icon.

  Dave

  You can find support for the installation/uninstall/upgrade / upgrade to Windows Live Essentials 2011 (QFE2) in this forum (where you will find that you are not alone): http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  You will find support for Windows Live Mail in these forums (ditto): http://windowslivehelp.com/forums.aspx?productid=15

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  An update is available for Windows Live Essentials 2011 (version 15.4.3538.0513) [AKA QFE2]
  Tip: Don't believe everything that you read this page!
  http://support.Microsoft.com/kb/2579871

• Update Vista causing an error code 10 on my dvd player

  After one of my systems reformatting, I get an error code 10 on my dvd player. Everything works fine until the updates for Vista (Vista Home Basic) are installed, then the drive is dead. I replaced the drive, but got the same thing. I tried to uninstall the device and update the driver in Device Manager and I get an error telling me that the unit was not installed correctly.

  Any suggestions...?

  Thank you

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner