Update BIOS of 1, 70 - WIN on Satellite Z830-10 t - computer not supported
Hi all
I am installing the update of the BIOS 1, 70-WIN of 09/12/12, delivered in a folder called "bios-20120907140253', unsuccessfully zip.
Whenever I run the .exe file, I get "this computer is not supported" returned in BIOS Toshiba package Ver.4.2.1 window.
My laptop is PT22LE-00E004EN.
Software from Toshiba Tempro advised me to install this BIOS update.
Is that what someone else has this problem, and is there a solution?
Thank you
Rob
In my opinion, you need not update the BIOS, even if the new BIOS has been updated.
I have a laptop works perfectly with the old BIOS and I don't have day to a newer version, even if the new updated released
However, I found really interesting thread with a solution:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=66787
Here's another thread with the same error message:
http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68345
The solution-> retrieve the laptop initial configuration by using disk HARD recovery and try again.
PS: do it before this try reinstalling the VAP
Tags: Toshiba
Similar Questions
-
3.70 BIOS update for model ptm50e Tecra M5 says this computer not supported
After you download an update of the BIOS for my Tecra M5 PTM50E model when I try to install it, says this computer not supported and yet it was obtained from the download page of Toshiba for my model? Also said the Management Console download also machine not taken in charge when I try to install that?
Can anyone help?
Hello
I agree with Akuma
The common Modules must be installed before you attempt the update of the BIOS.
The common Modules is an essential component of Windows systems.
It is required to TOSHIBA's other original programs to work properly, as the update of the BIOS!Welcome them
-
Complete description of the BIOS Version 1.40 - WIN for Satellite L300-1BB
Somewhere, anyone can find the full description of the bios BIOS Version 1.40 - WIN for the L of Satellite series, which was the site of toshiba on the date 01/14/09. Why should I do this update for my machine?
Kind regards.Hello
I didn t find details changed in the BIOS update on the page of Toshiba Europe.
I assume that Toshiba does not provide this informationHowever, if your laptop runs without a problem, then I would not update anything you know
I'm always that notice; never change a running system. And that's the best advice I've ever heard.PS: You're talking about L. Satellite... what Satellite L do you have exactly?
-
How can I fix Adobe Reader? I upgraded to win 10, updated the player to work with Win 10. Hated win 10, I went back to win 8.1, now the drive does not work and I can't uninstall it. Said channels can be verified.
Try to run this tool: Download Adobe Reader and Acrobat tool - Adobe Labs
-
Its satellite A210-131 driver does not support DirectSound entry
From Premiere Pro CS3, an error message is displayed:
-"Der zurzeit installierte Soundkartentreiber unterstuetzt keine DirectSound-Eingaenge"Es ist keine Audioaufnahme possible".
-"The its installed card driver does not support the entry of DirectSound. The sound recording is not possible.Please help me find a working driver. Operating system is Windows Visat Ulimate.
Thank you
SiegwinHello
To my knowledge the DirectSound is an addition to the system of Microsoft DirectX. It should be included in DirectX.
Please check if you have installed the latest version of DirectX 9 C.In addition, I would recommend updating the audio driver. On the Toshiba page, you can find the latest two versions of Realtek sound dirver;
-6.0.1.5374
-6.0.1.5406If the two will not support the DirectSound input try another on the homepage of Realtek.
The chip is called Realtek ALC268 -
Update of DirectX problems after Win 10 satellite L70-B-126-
Dear colleagues!
Since the update of my Satellite L70-B-126 from 8.1 to win to win 10, I am faced with several graphical problems.
I think, I realized the real problem, which is DirectX 12. I have already installed the latest drivers, but the system thinks, that the Radeon R9 265 X is no longer usable for Dx11.1. Since Win 10 installed automatically Dx12, I don't have any idea how to fix that so far.
Useful ideas or solutions?
All the best!
PaulThe game is perhaps using the Intel graphics card.
Uninstall the driver AMD.
Install the latest driver AMD leave AMD.com and configure the AMD Crimson software to use the AMD GPU for this executable game special. -
Need old BIOS than 2.20 - WIN for Satellite A300 (PSAGCE)
Dear friends Iam using toshba laptop
Model name Satellite A300
Part number PSAGCE-00C006AR
Serial number 98020636QMy problem is I am downgrade my system to windows xp sp3 before its vista and I'm upgrading bios 2.20, now its does not work properly problem with power... When I connect the power code system stuck... .all body have older bios please send me my Email:[email protected] sorry for my bad English please help
someone help me please...If anyone can send any old BIOS you are trying to contact Toshiba service in your country. They have access to the database of Toshiba and they can get the old version for you.
-
Satellite U92T/01Y - screen touch not supported by Photoshop or Corel
I have Corel Draw Suite x 5 that Corel believes he has touchscreen support and Adobe Photoshop CC (CC). Corel Photo-Paint X 5 does not even record my finger dragged across the canvas, and Photoshop allows me to draw that if I start first outside the canvas making it impossible to shoot with.
I read it is something to do with Windows 8 using Microsoft Ink and Adobe prefer at least a legacy API to draw on the screen. Is there a driver for this problem?
Seems not Adobe didn't budge so I was wondering if Toshiba have a work around for this please?
I don t think that they are subjects of the laptop.
I mean the system has recognized correctly the touch screen and the driver works as well.The question isn't related to the touchscreen driver but it is caused by 3rd party software that probably doesn t support the material properly.
In my opinion he must fix it by builders of application like Corel or Adobe.
-
Satellite A110-352 - update BIOS (MS-MS-BACK/Vista x 64)
I want to upgrade the BIOS on my cell A110-352. I run Windows Vista Business x 64, however, the utility of the bios for vista in the downloads section shows an authorization error (even when I run the program explicitly as an administrator).
Aid said that there are two ways to update, on of them is classic cd-rom boot, sort of update of ms - dos, but the MS-DOS software for the update of the bios is not provided in the download section.I was hoping that with a newer BIOS, all my 4 GB of RAM could be recognized.
Any idea, what tool/procedure is best to use for the update of the bios.
I hope someone can tell me where I can find the zip file, described in the 'how to' on the Toshiba site.Post edited by: ADMIN
Hi Roderik
Let's talk facts;
Is that ONLY the BIOS Win versions are available on the European driver Toshiba page. These BIOS can be improved by running only the Windows operating system.
The traditional BIOS update is not available on the Toshiba page it simply doesn t exist
So if you want to update the BIOS, you will need to use the version on the page.So now, let's talk about the issue of ram of 4 GB.
Is that different components need to support 4 GB if you want to use 4 GB memory full. The components are so; BIOS, Chipset and Windows OS.
If on this components will not support the 4 GB then you will not be able to use itThis means that an update of the BIOS will not use the 4 GB if the other parties will not support 4 GB!
Greetings
-
Question about updating Bios for Tecra M5
I bought the new tecra as M5 on May 12, 2006. I found the following bios updates.
16/05/06 update BIOS Toshiba 1.50 - TRAD
16/05/06 update BIOS Toshiba 1.50 - WINShould I go for this upgrade? Please recommend me.
Hello
I na? don't know why you want to update the BIOS.
Your device is fairly new in this case I na? t see any direction update the BIOS.
Please note that the update of the BIOS is not without risk.
If you use a bad BIOS or bad BIOS procedure if you may damage the card and these laptop parts are not very cheap.I agree with Flo. If your laptop computer is operating properly you shouldn't? t make the updates to the BIOS.
-
Tecra 8200: update BIOS: the utility is not available in V86 mode?
I want to update bios for Tecra 8200, but is to show "the utility is not available in V86 mode."
Please help me
Hello
James is quite right. To use this device there is only an update of the traditional BIOS available. If you want you can consult the FAQ update of the BIOS page. You can find it under http://www.toshiba-tro.de/gcc/biosinfo/index.html
Good luck!
-
User not authorized to update BIOS - Portege M100
Hi, I have a Portege M100 and I'm trying to update my BIOS to version 1.40 to 1.50 by using the windows update utility.
But when it gets to the screen where it says update BIOS preparation, place appears a message saying that the user is not authorized to update BIOS?1 user account is only available on the pc and it's privaleges admin, using Windows XP sp2.
Any help would be apreciated.
JasonHello
How have you tried to upgrade the BIOS? From the windows or have you used the traditional procedure?
According to this document, you must use the traditional BIOS upgrade procedure.
IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07But why you want to upgrade the BIOS?
Have you had serious problems which the BIOS update can fix?
Please note that you must pass the BIOS only if you have serious problems, and if you know that the upgrade of the BIOS will solve the problems. -
Update BIOS v6.00 - WIN for Satellite A100 - 811 (PSAA8)
I want to know if this update works great for the A100-811?
The latest version 5.9, I realized he had a problem with it. In fact messed up my computer.I took it twice for the service guys, because I thought I did something wrong, but I followed all the instructions corectly. Link to IOS http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B & FID = TRO0000000b07
Thank you in advance.
MariusPost edited by: mariuspmg
Hello
I ask myself why Toshiba is expected to publish a bad BIOS? :|
It makes no sense to me, you can find a lot of people with a Satellite A100 and as far as I know nobody had and problem with 5 BIOS update, 9 - Win for A100 PSAA8
So I guess you did something wrong.However, according to the European Toshiba 6.0win driver Bios page is available at this time and should work fine
But I have an important question; Why do you want to update the BIOS?
Is there something wrong with your laptop?
If not, then the update of the BIOS is not necessary and as you already know an update of the BIOS is ALWAYS risky ;)take care of the GUY
-
Satellite A300 - update BIOS 1.70 - WIN
Update BIOS 1, 70-VICTORY-28/04/09
Once again the same thing?...PSAG8E A300
Hello!
Can you please explain what you want?
Once again the same thing? What you mean?Good bye
-
Question about updating BIOS for my Satellite M40
So, my laptop does not start, but works recovery procedure. Support suggested me to update my Bios.
OK, given that the last time, it was easy.I downloaded the newsest version vor my Satellite M40 (PSM40) (1, 70 - WIN<= i="" have="" an="" ati="" grafics="" card)="" and="" extracted="" the="" bios-20070709161345.zip="">=>
But there was a surprise:
Instead of getting the old data structure, as written in the FAQ update Bios
1 extract the zip file containing the BIOS upgrade to a temporary folder.
2. in the folder temporary three subfolders will be generated. "docs", 'Update - 3.5' disc', 'Update - CD - R or CD - RW"I get a file only: BIOS of Windows Knockhill10GV170.exe
Extraction of it I get 8 files:
-fdbase.img
-InsydeFlash.exe
-iscflash.dll
-iscflash.vxd
-KPM170. ROM
-Platform.ini
-The c:\windows\system32\unicows.dllNow my question: How can I create this bootable CD-ROM to update my Bios?
Just to know: download all the other things are done on my desktop from my laptop is not starting ;)
I also tried to run the exe in the hope that it will create a floppy disk or a CD-ROM, but it is written "basic cfg address not found."Hello
Update the BIOS there are two ways to do this:
-Traditional mode (TRAD) and in this case, you need floppy
-Windows (WIN) and this update can be done under operating system running.Update BIOS WIN will work if you run Windows on your laptop satellite. If I understand your assignment well you are trying to do traditional BIOS updated, but using the BIOS to WIN update. On the Toshiba download page, there are two listed BIOS updates and two of them as versions of WIN. This means that you can update the BIOS under operating system only.
Back to your problem: in the history one thing confuses me when you write: my laptop does not start, but works recovery procedure. Sorry, but if the recovery procedure is working and you will have clean installed OS.
Be a little more concrete in our laptop does not start. What happen exactly when you press the power button / stop?
Maybe you are looking for
-
iPhone 5 s locked to iTunes?
5s IiPhone has iTunes on the screen logo. its telling me he needs to update or restore. Ive tried two of these many times but always goes back to iTunes logo. Ive has not tried different cables still no joy
-
Whenever I try to watch videos from facebook, it crashes. I even scanned my computer for viruses, but its own. IM really not sure what is wrong?
-
How can I get all my devices on the same page?
I have 2 computers, a 6plus of iPhone and iPad old. They are all linked to the same account. The office often does not get used, but the laptop, phone and iPad get used every day. My favorite feature is the ability to scroll in iBooks. So, I try to u
-
Audit failure Microsoft Windows security. 4625 login
Passe spent Review Journal windows 2008 r2, that is windows 7 from two computers constantly try to start the session. I spent the antivirus, antispyware, malware, etc and detect any virus, Trojan horse, worm, on computers. You can help resolve makes
-
Hi all I have been using the comments in ISE 1.1.4 feature (and earlier versions) for some time and I've always been frustrated with it. I am now in the process of establishing another feedback network using dot1x to refer to the internal source of U