Update Bios on Equium L350 now keeps restarting to load windows screen?

Similar Questions

• iPad 2 keeps restarting while loading

  I was given an iPad 2 and said that it might not work, but I thought it was worth a shot. After plugging in it started but the battery was at 1% and after going through the whole upward for a few minutes, she has restarted itself. I thought that the battery must have has just been completely dead after you have not used for some time.

  I had reset and put to update via iTunes and set up as a new iPad. He managed to do throughout the this without turning off despite only be connected to a USB port I found strange.

  Now I got the charger for nearly an hour and the battery is only 3%, but it still keeps restarting and running with battery at 3%.

  Any idea what could happen?

  EDIT: left in DFU mode for a bit and it is always off

  Since it has been restored as new and the problem persists, we guarantee that it is not software partner. If you have tried a different cable and the problem persists, it is more that likely a problem of material and the iPad will have to be repaired or replaced.

  I would say to contact the Apple Support and run a diagnostic on the device because it can be a simple battery problem.

  Hope this helps

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• PC keeps restarting after the Windows startup screen

  I recently bought a refurbished HP compaq 6005 microtour office format. The computer came with a blank hard drive with no OS loaded on this subject. Before this purchase, I owned a laptop with a Samsung EVO 850 250 GB SSD inside which has Windows 7 installed and worked fine until the motherboard went bad on it. I removed the SSD that laptop and installed in the new office refurbished. The computer starts up and reaches the HP invent display shows options key function and says "press any key to Option ROM Messages." and then after a few seconds goes to "starting Windows" screen and after a few seconds it goes back to the same HP invent screen.

  I tried the things:

  The hard drive is detected by a name in BIOS

  Made sure boot order has been on hard drive, first

  Tried to start Windows in Mode safe mode, last known good configuration and disable automatic restart in the event of system failure

  When I disabled automatic restart in the event of system failure I got a blue screen that says, "a problem has been detected and windows was forced to need down to avoid any damage to your computer...". ""Search for viruses on your computer. " Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. ... "CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Hello David,.

  According to your description, I realize you are trying to install a Portable SSD hard drive in a desktop computer that has Windows 7 installed on it.

  First of all I would say you do not to do since both hard drives have different specifications, and this can adversely affect your computer. I suggest you to contact the manufacturer of your computer before this change of material.

  On Windows, it is not recommended to mix computers with different operating system installed on a hard drive specifications. I would say to reinstall the full operating system such that two computers use different Hardware.

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

  Thanks and greetings
  Sarandeep S - Microsoft technical support.

• Got the error saying that unable to start Windows. Now, it freezes after loading Windows.

  Original title: Windows Recovery Error Question

  Earlier I was looking at my computer, running a virus because my computer scan playing strange earlier. Every time I start Windows, I would be spammed with windows titles 'open with... '. ». I managed to open the Task Manager and get rid of all of them, but my computer shifted significantly again. Whenever I close it and restart the same thing would happen. I opened my virus scanner and started running it. Of course, he had a virus.

  As I was waiting for the analysis at the end, my computer suddenly closed and restarted without any warning at all. It froze on the splash screen. To stop and restart my computer again, I received a message that says:

  "Unable to start Windows. A recent hardware or software change might be the cause. If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  I was given two options: Launch Startup Repair (recommended) and start Windows normally. When I select the Startup Repair tool, I am taken to a screen with a loading bar that says "Windows is loading files... ». After loading, the screen would freeze. If I try the other option, I am taken to the splash screen and it would freeze.

  Is it possible to fix this? Any help would be greatly appreciated.

  Hello

  I suggest to unplug an external device connected to the computer and then try to start the computer and check if it helps.

  Otherwise I suggest you to contact the computer manufacturer for help.

• Impossible to update the BIOS on Equium L350

  I tried updating the BIOS on my laptop but when I run the update I get the message "the ROM file is not newer than the BIOS. I've updated all the others drivers drivers optical drive, when I run the update to do this I get the messagae that they are not compatible, even if I download the correct one for my model.

  Any ideas please?

  Sorry my friend, but I do not understand what you want to hear now. It seems that you are a fanatic of the update ;) Just a joke!

  As you can see it the downloaded version of BIOS is not an end of history was updated.
  Driver optical drive? Can you please tell me what it is? What is the name and version of the file that you want to install?

• Updating BIOS on Equium A60 to cause the BSOD?

  Hey,.
  I had my Equium A60 for a little less than 2 years and now it has started flasihing a blue screen when it works for a while, I tried to read what he says but it's too fast and then it restarts the computer! the only things I can do out there are BIOS of letters that I've now put together probably need an updated (or so I hope this is just the problem)...

  given that I've never updated the BIOS until I was wondering if I make a mistake it will cover on my extended warranty? I think I also insurance on it could someone help please?

  Hello

  This document explains how to disable the automatic restart of Windows XP after a system failure:
  http://support.toshiba-tro.de/KB0/FAQ5B01770000R01.htm

  If you turn off it does not restart the laptop and you can read the error message.
  But I think that this message is not really a help. You will get a memory address, and a common user is not able to read this BSOD.

  The BSOD appears especially because of the misconduct of software or a hardware malfunction.
  I put t think that BIOS update will help you with this problem.
  I think you should try to reinstall the operating system. Especially the new facility allows to solve software problems

  But probably the high temperature may also be responsible for these BSOD errors.
  In this case you should check the fans. Most dust and debris would be responsible for the high temperature because fans may not turn with a maximum return.

  If you have no experience a technician must clean the notebook professionally.

• Update BIOS HP, no noise now?

  I have a HP Pavilion dm4 I bought last summer, but I know not which model #s specifically comes after that.

  I just updated my BIOS HP and now I'm getting no sound on speakers or headphones, this has happened before but I can't remember what was the solution. Help, please!

  Also I'm a sort of computer-challeneged when it comes to things like that, if you can include step by step instructions in your solutions it would be awesome! Please and thank you!

  Hello

  You have a few options as I see it.

  First check if the speaker unit icon is not cut.

  Go into Device Manager and uninstall the driver and restart and unit automatically installs the driver.

  Try to run the system restore to the date where the unit was working fine.

  Try to update the driver from hp.com site.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Updated BIOS for Equium L40

  Hello
  I have an Equium L40 x 10 with PSL41E model number. This update will work with it?:
  http://UK.computers.Toshiba-Europe.com/innovation/download_bios.jsp?service=UK

  He said he works with only with the numbers of model PSL40x, PSL41x or PSL43x, don't know if the x is a model number or designates any letter?
  Thank you.

  Out of curiosity: you have a serious problem with your laptop? I mean what is the reason for the update of the BIOS?

• Updated BIOS for Equium L20 missing docs?

  I recently downloaded the upgrade of Bios for the Equium L20 PSL2ZE.
  I need to this day with a bootable CD-ROM.

  In the FAQ, it says in the sub-heading "Option 2: update with CD-ROM" the following text:

  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. in the folder temporary three subfolders will be generated. "docs", 'Update - 3.5' disc', 'Update - CD - R or CD - RW"
  3. how to make a bootable CD-ROM please read the *.pdf file in the "docs" folder

  Problem is the Bios upgrade download does not contain the docs with the required pdf file. How to make the CD bootable, strange!

  Can someone please send me the document.

  Thank you very much
  Alum

  Hello

  Please don t mix old TRAD and new BIOS WIN updates.
  As far as I know old traditional BIOS update can be done with bootable CD but WIN version is updated to the BIOS which can be booted under Windows operating system.

• Need update BIOS for Equium A100

  We have an Equium A100-147, and I am trying to locate the update of the bios for this machine. The Toshiba web site lists an update for a PSAAB but or model is a PSAABE-00800EAV. What is the correct update?
  Any help would be appreciated.

  Thank you

  Hello

  It is true, that it's the correct BIOS for your machine.

  Good bye

• Updating BIOS for Equium A60-181

  Hi, according to the toshiba site there is a new update of the BIOS for my laptop.
  I was wondering is it worth the update, unfortunately, there is no information
  provided regarding the bugfixes or improvements? Also can I use the
  Windows update tool or use the bootable CD, it's just I'm not sure
  flashing Windows XP, except if it is a procedure without normal fault?

  see you soon,

  Richard S.

  Hi Richard

  Richard you have some problems with this device? If everything works properly I don't see a reason any BIOS update.

  If you think that the update of the BIOS is necessary, you can try Windows based Bios update but please check the first Description of the Toshiba BIOS update before you continue.

• Update BIOS on Equium M70 (PSM77): wrong size of Rom

  So I tried upgrading the BIOS (I need this update) choose the option of windows xp (which is what I have) and download the file, and then it says "Rom size is incorrect" and cancels the installation.

  Can anyone help?

  I urgently need this update.

  Thank you.

  Hey Buddy

  I think I can help you with this annoying problem.
  The problem is that you have incorrectly retrieves the BIOS package.

  Please check this Toshiba document which provides the solution;
  [The size of the ROM file is incorrect | http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm]

  Hope I could clarify one point ;)

  Good bye

• Update BIOS on Equium M50

  I have upgraded the memory from 512 MB to 2 GB (2x1GBs), but have encountered problems. I was told to update the BIOS for my laptop and everything will be fine.

  After watching for the update and read the instructions, I am a little worried about this. It's simple, or I should consider first. I don't understand what that means when he says to put the phone in boot mode before update?

  I'm not an expert, but I want to accelerate this laptop, it's faster.
  Any help please...

  Hello

  May I ask what's wrong with the memory upgrade?
  Maybe update the BIOS is not necessary?

  You must know that the update of the BIOS is always risky! A bad BIOS or bad BIOS update procedure can damage the module s ROM motherboard!

  > do not understand what it means when it says to put the phone in boot mode before upgrading
  If you want to put the laptop in start mode you need to simply stop the laptop. Don t he put in hibernation mode or standby. Just stop!

• Keeps restarting to the opening screen of Toshiba Satellite L300

  My satellite L300 starts with the Toshiba screen and keeps leaving regularly until I see the blue panel of Windows saying please wait... After that the screen goes black, and it shows the opening screen of Toshiba. I tried to go into the system by pressing F2 or F12 but I'm a technical noob and it's way to complicated for me.

  According to my sister she has something to do with a faulty download and I need to insert some kind of code in one of the systems (F2 or F12).

  Anyone who is familiar with this problem and maybe someone can explain to me how do I solve this problem?

  Thank you!

  To start the laptop in safe mode, try to please.
  When you turn it on, press F8 to display the advanced startup options. You will find the option of safe mode.

  Wait for windows to load. I hope that you will be able to do.

  What you can try then is to roll back OS to an earlier time using System Restore option.

  Please test and send feedback.