Update CPU in Compaq Presario SR1901WM?

Similar Questions

• Compaq Presario SR1901WM: Problems burning

  Hi, everyine, I'm having a problem with my Presario SR1901WM. I'm running Windows XP, SP3, all installed updates. The problem is, when I try to burn a CD, it stops after about 45 seconds, a tray open the CD and I get an error message, there was problem burn your CD, you can try again with another CD, or cancel. I tried with 2 different programs of engraving, Sonic Digital Media Home and CD Burner XP, same thing. I tried 2 different burners, a Sony DRU-840 has and a DVD Super-Multi 16 X on a Compaq SR5613WM, and the same thing happens. I tried both programs with two burners with the same result. I did a full check disk, including scanning for and attempt recovery of bad sectors and a disk defragmentation. Always the same thing. I tried 3 different brands of media, still no CD. Anyone has an idea on what's going on?

  Well, it doesn't seem to be a problem.  The problem is that all displayed disks are old and it could still be a bad drive.

  In addition, being that the computer in question is 2006 it could just be that the interface for the player is bad.  The SR1901WM is a technical computer limited, but it should still be able to burn a CD.  If the means to burn it on a CD are necessary, in this old computer, I would first try another IDE port for the DVD/CD player see if that's the problem.  A different ribbon cable would be the next option.  Finally, try an external box that can connect the drive or a connector like this: http://www.amazon.com/Sabrent-USB-DSC5-3-5-Inch-Converter-Adapter/dp/B000HJ99DI

  If the last option is chosen, then all mentioned discs can be checked to see if one of them works, or borrow another drive to the test.  Then report on the results.

• Automatic update blocks my Compaq Presario

  My Compaq Presario has been frozen for more than one full hour to 61% in step 3 of 3 of automatic updates.   Because I told

  Don't go off, what do I do?   Thank you very much.

  Hank

  He give some more time, 1/2 day.

  If you have hard to turn it off, and it stops working:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.
  Mick Murphy - Microsoft partner

• Updating BIOS for Compaq Presario V5201US with the version of BIOS F.41

  Hello. Is it possible to update the version of the BIOS for my Compaq Presario V5201US laptop? This version is F.41

  There is a BIOS F.54 available here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3184257#n765

  The problem is this is an executable of Vista and there was problems with trying to flash executable under Windows 7 Vista if that's what you run. What problem do you think that will set a BIOS update?

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Issue of upgrade CPU laptop (Compaq Presario)

  Hello

  Can someone please confirm that my Compaq Presario B1223TU, who has a processor Intel T5250 CPU can be upgraded to the Intel T9500 (Penryn) 2.6 GHhz.

  I already installed the latest version of BIOS 68MSU f.0Une on my computer.

  After checking the site Web of Compaq to my computer here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-57986-1&lc=en&dlc=en&cc=us&...

  In the correction and improvement of article he States: "adds support for new Intel processors.

  What exactly are these new Intel processors because it is not clear? It's the BIOS version 68MSU ROM. F05

  I guess that means it supports the new Penryn T9500, T8100, T8300 and T9300 processor, but I'm not sure.

  I also found this site selling retail who says that it is supported as well for my particular laptop but it does not include the Intel T9500: http://www.ambry.com/page/modelnu/GS111PA/463050-001.html

  Can someone please confirm that the T9500 is a possible upgrade for me. Thank you.

  Kind regards

  Tze

  I give her thumbs upward

• Fan CPU in Compaq Presario SG3450IL failure

  Hello
  
  I use a Compaq SG3450IL with Windows-7(32-bit) OS desktop pc. You need the card mother ms-7525 v1.0 is installed in it. The question is that whenever I turnon or restart my pc it displays "error: CPU fan failure, shutdown of PC will immediately in a few seconds.» PC service immediately. ». But, when I open the Cabinet cpu one comes to know that all the fans inside the CPU properly. I use to press F2 and ignore this issue. But, after a few months, pc allows to recover for several times. I had formatted my OS together for this issue, but no use. I contacted the service of hp on this issue and they suggested me to change the cpu fan. I want to know if these two problems can be solved by replacing the cpu fan with a new one. Please guide me on this issue. I'm waiting for your valuable suggestion that there expert day.
  
  Concerning
  Rachid

  Hello

  normally, while the CPU fan error comes, it appears on the screen with a red font and pc stops immediately.

  However, if the system fan fails, pc gives message with white font and generally wllows to start Windows after you press the F2 or F1.

  If you are facing the second situation then a way to disable the message of would be - to go BIOS by pressing Ctrl + F10 when booting. Then go to advance the menu and then scroll down to hardware monitor. and you can now turn off the system from the BIOS fan control.

  I hope this will help.

• Update CPU on a Presario SR1650NX

  I plan on upgrading the original AMD 64 3500 processor in an old 1650NX Presario SR to an AMD 64 X 2 4800 +.  The motherboard will support it, but what I need to replace the heat sink, or is the original enough?  Thanks in advance for the answers.

  Hello

  The CPU comes with its own heat sink? Based on the following link, the heat probably is ok because we use 62W and one other 65W:

  http://reviews.CNET.com/processors/AMD-Athlon-64-3500/4507-3086_7-31896449.html
  
  http://www.CPU-world.com/CPUs/K8/AMD-Athlon%2064%20X2%204800+%20-%20ADO4800IAA5DO%20%28ADO4800DOBOX%29.html

  Good luck.

• CPU upgrade compaq presario sr511onx

  I need some info, I am doing an upgrade to the processor on a presario sr511onx.  IT has a single processor core in there now AMB athlon 64 3800 + 2.40 GHX. Here is the new processor I will install here is the link.http://www.outletpc.com/c1482.html. Here is the product info link.

  http://h10025.www1.HP.com/ewfrf/wc/prodinfoCategory?LC=en&DLC=en&cc=us&lang=en&product=3436819

  I wonder if i this is goig to be a nighmare to remove. I wonder if I can drop in and it will go.

  Message edited by jchambers2586 on 30/01/2009 14:30

  I see a lot of performance of a single core processor processor .to duel core I have also 3 GB of ram installed.

  Message edited by jchambers2586 on 02/01/2009 12:49

• Update CPU for compaq dc5750

  I seeks to upgrade one Promodc5750s/A64-38/80hnw/10R4k us for a dual core, but can not find definitive information if it is a socket AM2 or maybe a rare 939 mobo.   I guess it's AM2, but do not want to burn cash on a part that does not.

  The p/n is RT740UT #ABA

  Y at - there no marking on the mobo?  Know the part number?

  Thank you in advance to anyone who might be kind enough to offer advice.

  Best,

  Roscopico

  The mother card processors are socket AM2. The series of socket 939 AMD Athlon 64 X 2 only went up to 4800 +.

  You can tell by using the part number HP CPU as keyword when you search Google or Bing.

  Here is an example of the card mother mother found on eBay. The specifications also specify socket AM2.

  Here is the guide Service and maintenance with a list of all compatible CPUs from AMD.

• HP compaq presario cq5300uk: update of hp compaq presario cq53

  Hello

  I'm looking to upgrade my desktop pc.

  What I expect:

  -Amd phenom iix4 965 black edition

  R7 - Msi I thnik he need to 500watts

  Maby - a new PSU, my only account 230watts

  Please can you tell me if I can adapt these elements as well as any recommendation if not.

  Thank you

  Note: Im paartly new to building computers had the experience to change the ram, gpu and hard drvies.

  Thank you!

  Black editions are generally not compatible HP.  The last series of compatible graphics cards was the GTX 660-670.  Your system is unable to use most up-to-date maps of UEFI, as the R7.  Discoverhybrid cardsby MSI.  (without guarantee)

• Compaq presario cq61-408sl: compaq presario cq61 bios bios upgrade f24 o Reinstall f15

  Hi I have a bug for pc power is not just a part of the bios, but when it warms up a bit ', then I need to try to update the bios and now currently ' F.15 version with a more "recently I thought that le.24.Chiedo f so you if you could give me the link to download this day thank you." My product is: compaq presario CQ61-408SL mother of model WN531EA code don't know ' where trova. Fatemi know thanks

  Hi @mario63_2

  Welcome to the HP Forums!

  This is a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you are looking for a bios update for your compaq presario CQ61-408SL. Your current version is F.15.  It is the recommended version for your laptop.

  Update the BIOS.

  Please note that caveat on the above document.

  I'm including these documents, I don't know whether you need it or not.

  An overheating and Auto Shutdown problem troubleshooting

  Reduce the heat inside the PC to avoid overheating

  Good luck!

• Compaq presario cq62-219wm cpu update

  We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible. How can I find a list of processors that can I update? the model number is WQ778UA #ABA. the serial number is *. any help would be appreciated.

  davidljtn44

  You can virtually none of the PENRYN 45nm lithography processors put in it, the optimal processor, you can upgrade is the Intel core 2 duo t9500. I have the same laptop and I have the next step down from what is the Intel core 2 duo processor t9300. There is no complete list of the processors that it will support the lists that you will find are incomplete at best even Intel does not update their information. Go to intel.com and search PENRYN in a search more people you can use, you need to compare to ensure that.

• Compaq Presario SR1320NX CPU update

  Here is the link of hp.com to product specifications: http://bit.ly/SJBPPl

  HP #PP158AA product

  (1.) I want to know if I can upgrade the processor and if so what CPU and I also have to upgrade the BIOS if I upgrade the CPU?

  2.), what new motherboard can I install in this case so that I can reuse the case and devices of e/s that came with the Compaq Presario model?

  Thanks for the comments...

  Hello

  Your post is under laptop. In any case, here's the info on the motherboard that shows taken CPU supported:

  http://support.HP.com/us-en/document/c00257657

  I'd throw the case or you need a ' Micro-ATX format: "motherboard for it. More information:

  http://www.formfactors.org/developer/specs/matxspe1.2.PDF

  http://www.TechRadar.com/news/computing-components/motherboards/8-best-micro-ATX-and-Mini-ITX-motherboards-923069

  Kind regards.

• Compaq Presario CQ60 notebook PC CPU update

  Hello

  I have compaq presario CQ60-419WM with processor AMD Sempron (http://support.hp.com/us-en/document/c01753032) and I want to upgrade.

  I did some research and found out that it is possible to uprade my cpu with this processor TMRM72DAM22GG (AMD Turion 64 X 2 2.0 GHZ). im posting this question because I want to assure you that I will buy the right processor and not wasting money. I googled and this site is the only store that can shipped here in the Philippines.

  will this work with my camera? http://www.aliexpress.com/item/brand-new-laptop-CPU-processor-AMD-Turion-64-X2-RM-75-RM75-TMRM75DAM2...  or any suggestions? Please

  Thank you in advance.

  Here is the Service Manual:

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  The RM-75 processor is NOT on the compatibility list.

• Compaq presario cq43: compaq presario cq43 cpu update

  I have a compaq presario cq43 notebook pc with APU AMD E-300 with radeon hd graphics 1.30 GHz and 8 GB of ram.

  is it possible to upgrade my cpu to a more powerful?

  Hello

  No, it is soldered to the motherboard and buy new CPU with motherboard would be a very expensive updrade and it may NOT work at all.

  Kind regards.