Compaq Presario SR1901WM: Problems burning

Similar Questions

• Update CPU in Compaq Presario SR1901WM?

  Currently, I have Compaq Presario SR1901WM - with a "stock with the exception of a stick of RAM and the new pci video card e."

  The motherboard specs are here:

  http://support.HP.com/us-en/document/c00647121

  Power supply is a 250w ATX 12V and probably had to be upgraded, according to the specifications of the card, with the exception of some low-end cards that can handle it.

  http://PartSurfer.HP.com/search.aspx?type=prod&SearchText=RB063AA

  The form factor of power supply is an ATX 12V which is common and there are many available.

• Compaq presario cq61: PROBLEM STARTING WITH PRESARIO CQ61... CAPS AND NUM LOCK FLASHES every 4 seconds!

  Hello! I have a problem with the starter. When I try to boot my laptop, my screen is black and Maj CapsLock and numlock just Flash every 4 seconds. Then I go to your page to download the BIOS. Well, when I dl and install Recovery BIOS for Compaq Presario CQ61-420EM get some InsydeFlash application, what is it for? I saw in the video that you get HP system BIOS update utility tool and that is the problem for me, I don't understand this application, instead, I get this "InsydeFlash" I don't know what is! HELP PLEASE!

  Hi @patrik13,

  Thank you for the update and confirmation.

  You would be kind enough to mark the post that solved your problem as accepted solution to help others who may have the same experience as you.

  Thanks in advance.

  Good luck with the repairs.

• Compaq Presario CQ61 problem

  Good day to all,

  I have a problem with my compaq presario cq61. My unit does not start with the battery or even the power supply is connected.

  > I don't know that my diet is in good condition. The LED is on and it's output voltage.

  > I noticed something that when I plugged the power in running the LED of the controller turns on but input domain after sometimes (about 5seconds) LED off suddenly.

  What is the problem with my Compaq Presario CQ61? Please help me with this.

  Thank you very much.

  Hello jervenbatilo,

  I see you have power relative to problems with your HP computer. You did most of the troubleshooting that is appropriate for your question.

  I'm including this link which has most of the troubleshooting steps that may solve your problem.

  If you are unable to get any power on the computer, it is most likely a problem with the motherboard of the computer.

• No disk bootable on Compaq Presario CQ42 problem

  Hello

  I recently came across a problem with my laptop Compaq Presario CQ42-117TX. I had a few regular updates installed and when I tried to restart the computer to complete the update, it starts for a long time then usual before flashing a blue screen for a second and then blacking out.

  When I restarted it again, he said he had no hard drive detected. I ran a check of the system BIOS and he could not run a quick test on the hard drive. When I try to turn it on normally, it goes to a black screen with a few details on the material inside and the last line reading "no bootable disc - insert boot disk and press any key any."

  Any help would be highly appreciated.

  Thank you!

  You are the very welcome.

  I don't see any notebooks CQ42-117TX.

  Here's what I noticed that...

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=CQ42-117TX+#N393

  If you do not live in the USA/Canada, call HP for the country that you live in the link below.

  Call the phone number for PC consumers.  See if they have a recovery disc for your model

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

• Compaq Presario CQ70: Problem starting. Windows didn't start up.

  Hello!

  I ask help for my huge problem. My laptop doesn't boot.

  First of all, I got problem with my admin user account. It has no boot at all. Error: "your user account only missed. We could not load it. SRY. "

  Then, I did start my computer and go to safe mode. Then I did a system restore. After that everything worked fine. I was thinking its time to format my computer and update my windows vista to windows 7 Home premium.

  Well, I made a bootable USB Flash drive. Windows 7 installation package. I tried to start my computer several times USB key to install new windows. It never not worked. I look at bios Boot media is the USB HARD DISK.

  Then I losed my nerves.  I did a rom of DVD of windows 7. I put the dvd in cd rom. Then shutdown computer. Launch it and press F9 to get the boot media. I choose CD DVD ROM for the start.

  Then my computer freeze totally... I couldn't do nothing. I wait 2 hours nothing happens. Then I stop at powerbutton force.

  Now my computer starts is completely destroyed upwards. It works the bios very well, but after that, he's trying to run windows. It freezes.

  She's everywhere. I try to run the factory settings. Gel

  I try to start the installation of windows 7 dvd rom. gel

  Flash drive USb does not even start.

  Try to go normal boot freeze after executing the bios image. He tries to run the window loading logo, but it fails and freeze.

  I already have, I thought that my HARD drive is golden. But I did a test boot and bios. It is not very well. None does not at all. So, it shouldn't be broken?

  I tried to do something strange reset HARD drive. Unplug all at my feeder area for computer laptop battery. And push power button 30 sec. But it has no effect at all.

  None does not work should I buy a new HARD drive "?" or is my just locked HARD drive or somethng?

  Brand laptop Compaq Presario CQ70

  Windows Vista

  Version of the BIOS F.26

  Advice, should I try?

  Hi @Koodari,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand you are trying to upgrade your system to Windows 7.  You tried to boot from a USB, but after several attempts you have created a DVD with Windows 7.

  You have tried to boot from the DVD but even once is not successful.

  You have checked the boot order and it is set to 1. USB 2. Hard drive.

  Here is a link to HP Notebook PC - configuration of the Boot in the BIOS system order. to help you to change the boot order.

  Here is a link to HP Notebook PC - perform a recovery of the system (Windows Vista) HP. Follow the process on a disk.  Once you have started on the drive just follow the installation process as you normally would.  Of course this isn't a cover you won't get the option to backup your files.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If this solved your problem please let other people know in choosing the solution provided.

  Good luck!

• Keyboard on Compaq Presario CQ60 problem

  My daughter has a CQ60 notebook that was working fine this morning, but this afternoon the Q W E R U I O and P keys have stopped responding. I could check, all other keys are not affected. Any suggestion would be gratly appreciated.

  Before I / we assume that the keyboard is bad you need to reinstall the driver, that seems to never work, but we should give it a shot anyway. Go to the control panel and find the Device Manager. Click on that and find "Keyboard" in the list, click the small arrow to decompress. Right-click on the keyboard and choose to uninstall the driver, ignore the warning and continue. You will be prompted to restart the computer and start it will automatically reinstall the driver.

  _____________________________________________________________________________________________

  Here are some of ebay.co.uk.

  http://www.eBay.co.UK/SCH/i.html?_FROM=R40&_trksid=p5197.M570.L1313&_nkw=CQ60-212EM+keyboard&_sacat=see-all-categories

  They are a little expensive, I think you'd be better off getting one of the United States that is ready to ship on the seas, a ship from Hong Kong (probably where they are made).

  http://www.eBay.com/ITM/new-keyboard-HP-Compaq-Presario-CQ60-series-496771-001-us-layout-black-/200662921015?PT=PCA_Mice_Trackballs&hash=item2eb8712f37

  Here's where I got that from.

  http://www.eBay.com/Sch/i.html?_nkw=CQ60+keyboard&_sacat=0&_odkw=CQ60-212EM+keyboard&_osacat=0&_trksid=p3286.C0.M270.L1313#ptm190506653154

  Here is your service manual and a few videos in the media library of the HP Services.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF  Look on page 4-18 and a bit beyond. Be very careful when you remove the cable from the ZIF connector on the motherboard, if you break that he condemns the whole motherboard.

  http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml  If you have difficulties to navigation in your model and videos, post again and I'll give you some instructions. Give the page time video too load. Yours is very easy to remove, there are 3 screws marked with a symbol inside the battery bay keyboard that hold it in place and it throws just to go to the nearest rear of the screen.

  

  Once, you get to the video page, navigate to the keyboard in the left column.

  Note that it does not list the CQ60-200 series, but the 100 series is the same.

  You can also order the keyboard of HP once, you know the part number, it will be at the back of the keyboard ending with

  -001.  You will pay bonus for it through HP and you will not be able to order the parts anyway, I discovered that it is only available in the United States, it is perhaps different in the United Kingdom.

• Compaq presario Wireless problem

  Hello, please welcome me here and sorry if im posting in the wrong place, so I have the Compaq Presario cq60 107EL, I had installed the Vista Home Premium, but must find the wireless network card driver, and I can not find them, was get a lot but nothing found, maybe im looking in the wrong places.

  any info from my machine you would like to know more help?

  Hi, thanks m8, internet ok now thanks to you, I look forward to you next time, thank you for now.

• Compaq Presario CQ4010F: Problem of block of POWER Possible on Compaq Presario CQ4010F

  Yesterday, the computer turns off by itself.  When I rebooted, it again stopped three times until finally, he wouldn't do anything.  Here are the troubleshoorting things I did so far: while the POWER supply light is on (not flashing) whenevery I push the Start button, the Start button light and the two connected fans, but the motherboard, as well as the fan on the flicker of the PSU momentarily, then there is nothing.  The light goes off, and whenever I have the light on unplug and plug the power cord in the same thing happens again and again.  This is after I unplugged all of the PSU except for the connector on the motherboard.  Could this be a faulty PSU?

  Hello

  You must have the connector 24-pin and 4-pin ATX connector connected to the motherboard. If you are still having the same problem then try a replacement power.  A competent local PC repair shop should be able to test your power supply.

  However, based on your other posts, you may have a bad mother in which case I suggest you a new PC.

• Compaq Presario CQ60: problems with a password on my compaq Presario CQ60 power

  Hi, my niece was playing with my CQ60 and now there is a power on password, the code that appears after 3 fails is 57835687 any help would be greatly appreciated. Im sorry if I asked this question in the wrong place. Thank you

  @millicent8383

  Enter 48793209

  Kind regards

  DP - K

• Compaq Presario 2700 windows 7 CD/DVD/RW problems

  Hello, I have a laptop Compaq Presario 2700 and it won't play all the discs in the cd rom. It WILL eject it and try to load it because it I can hear and see turn but then my computer tells me to insert a disc. Windows Media player and Nero all say the same thing. Ive updated all drivers and my computer says there is NO problem. However my smart, family of Mobile Intel 965 express chip card is having issues ive uninstalled and reinstalled and nothing works. I seatched my computer and before I upgtaded for Windows 7, the smart card has a chipset 945 express. Help! I love my rock ' n roll and burning cd and its been almost a year without my cd/dvd. Thank you very much Karen

  When you insert a disc, you are able to view the data on the drive in Windows Explorer?  Since you have attempted to load the non - RW disks and still nothing happens that looks like it could be the drive itself.  Did you go to the Web of Compaq site to check for the latest drivers, firmware and any type of updates?

• Problems with Compaq Presario 5BW220 RAM

  This office is 8 years old and supposedly supports 512 MB memory SDRAM PC100.

  Recently, I worked on this for my son-in-law.  It came with 64 MB of SDRAM PC100 and Windows Millennium Edition.  I tried to install 2-256 MB memory SDRAM PC133 maximum amount supported RAM, but it refused to start.  I replaced every 256 MB module with a 128 MB PC100 module and managed to do start.  I expected to read 384, but he will read only 256 MB.  I had not all PC100 256 MB modules to use.  I finally installed modules from 2 to 128 MB PC100 and he left like that.

  I never had a problem in the past with an old desk accepting a combination of PC100 and PC133 modules, so it was a first for me.

  The Compaq Presario 5BW220 have a problem with the acceptance of this combination, and she actually says a maximum of 512 MB?

  This could be useful in the future:

  http://www.crucial.com/

  If you click "scan my system" he can tell you all sorts of things on the RAM.

  I have a system built home (with all the paperwork by moving the boxes...) who had a chip spoil.  I could not remember what RAM took it and I didn't go root through the boxes in the garage. =)

  Their scanning system could not see what kind of memory I had, but he told me exactly what my motherboard could support. (Type and max of 1 GB per slot)  He even suggested several configurations of memory.

  Once I saw what he said, he had, I remembered that I had bought before and it didn't fit.

• Problem with the Compaq Presario CQ60-216DX

  Hello, I'm having a problem with my NEW Compaq Presario CQ60-216DX mother. Every time it boots up vista and I run internet explorer, I get a strange blue screen which exports a file memory and reboots.

  I have the feeling that this might have been caused by a virus, but I can't do something, because Vista can't reformat long for some reason any.

  I tried a hard test in my motherboard and he said that there is something wrong with my hard drive.

  I don't know what is happening, right now I'm in safe mode trying to find viruses that Nod32 does not detect everything.

  Can someone tell me how I can get either the Windows XP Discs to work at startup (which, for some reason, they do not), or an alternative to a long format?

  Is there a way to fix this without reformatting? There's almost nothing on this laptop anyway so I'm always willing to do. A regular format has done nothing to solve the problem, I did it with Ubuntu and it did a quick format, but I had no problem with Ubuntu. Then I reinstall Vista and I am constantly having problems with a blue screen of death.

  Someone knows how to fix this?

  The Chemich does not exist

  If you want to do a reinstall of Vista then press F11 continuously during the boot upward. This will bring you in Recovery Options were you can choose to restore the system in the same State as when it was purchased. But if, as you suggested, is that a problem of hard drive reinstall won't help.

• Wireless problem Compaq Presario CQ62 220 sv here is the solution! for 220 sv!

  Hi, I need help! Fast please I have a compaq presario CQ62 and do not work wireless

  I installed the driver for the wireless, but do not work

  is a BIOS problem? or anithing alse

  Please I need help! Fast!

  Thanks, Alex

  Sorry for my bad English!

  FAST!

  Update > I enter the device maneger and network controller is not installed

  Hardware ID >

  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
  PCI\VEN_10EC & DEV_8171 & CC_028000
  PCI\VEN_10EC & DEV_8171 & CC_0280

  Hello

  First of all, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46940.exe

  When this has completed, restart the laptop.

  When windows has completely recharged, download and install the Realtek WLAN driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46673.exe

  Kind regards

  DP - K

• Compaq Presario CQ56 - :(wireless Internet problem

  Hey everybody,

  So I just joined here to see if anyone can help with my problem, because frankly, I'm out of options now about two weeks asking friends and colleagues and searching the Internet for answers to similar problems. I tried twice with the information I found on this site for quite some time and it does not work for me!

  In any case, I have a HP Compaq Presario CQ56 laptop. It has been implemented correctly when I bought it, everything worked perfectly. I managed to catch a virus that prevented me from even turn on my computer (which is strange, because I'm not a fool with computers, and I know what not to do/download sites to visit), so I had to restart my computer to stock, I used my Windows 7 disc, partitions formatted and installed windows again.

  Now, for some reason it doesn't connects wireless Internet. It connects when I have an ethernet cable connected, but it is not all networks, as shown in this screenshot:

  

  (And also here's a cute Bunny for your pleasure)

  So you see my problem it is very frustrating. I don't know what is the cause, but I guess it must be a driver problem? Which is why I write here, if this is indeed in the wrong section, please accept my apologies.

  Here is an another screenshots that can help, just in case:

  

  If someone could shed some light on the problem for me, or even to resolve, I'd be very grateful it is extremely annoying. As I said, it works fine when I have my laptop connected to the internet, when I'm in College, but when I come on a weekend, I can't put my laptop, because I only WiFi at home.

  Thanks for reading

  Hayley R

  You are the very welcome, Hayley.

  The problem is that the needs of the wireless (network controller) one adapter driver installed and here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  Once you install the driver above, the wireless should work just fine.

  Best regards

  Paul