Update drive SATA 2.5 to 200 Gig Hitachi (A 0, 53070)

Similar Questions

• CS6: Windows 7: driver needed to monitor Philips 200 WP7

  A friend and I spent an hour this afternoon trying to get a updated driver for my monitor - Philips 200 WP7.   My current driver is 1.0.0.0.     I recently got CS6, and he says that ideally I should update my driver.   Philips does unfortunately not provide a driver for my monitor with Windows 7, only with older versions of Windows.      Everyone here has updated this driver for Windows 7, and can they recommend anywhere where we can get our hands on an update?

  Help would be very appreciated.

  You must monitor the drivers, the operating system it is running in native mode (plug ' play).

  What Photoshop is an updated video card driver. Not that Photoshop will not work without it, but some (minor) features may be disabled.

• Game: update driver for NVIDIA GeForce - Sat P20

  I'm not able to run a updated driver for my NVIDIA GeForce FX Go5600 on Satellite p20-521. can someone help me please.

  Hi Cuong

  I guess you use a bad video driver or a bad graphics card driver update procedure.
  Toshiba recommends to use own graphics drivers. All the drivers for laptops Toshiba Europe you will find on this site:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  After having successfully downloaded, please unzip the driver. There you should find a setup.exe. Please install it.

  Well, if this procedure doesn't work please go to Device Manager and select the graphics card and right click. Then, you select the option Update driver. The source of the driver is the driver download.

• HP Pavilion G7-1328dx: basis of slow AMD driver Sata on AMD HP G7-1328dx

  We have two laptops HP Pavilion:

  (1) HP G6-1328dx with Intel i3 and Intel chipset and controller Sata Intel running a Samsung SSD 840 very well with high expected random read/write time.

  and

  (2) HP-G7-1328 x with AMD Llano A6 - 3420 M procvessor with a built-in AMD chipset and a controller Sata AMD running a Samsung 850 EVO SSD in much slower times of random read/write - way below the Samsung should both read/write random.  50 to 60% slower.

  Both laptops G6 and G7 have 3 Sata hard drives, AHCI is enabled on both, and both are running as Windows 7 SP1 64 bit OS.

  So the problem is why the Samsung 850 EVO runs slower on the G7 countries than the base model Samsung 840 runs on the laptop G6?

  Y at - it a update controller driver Sata AMD that will solve this problem or another solution that will do?

  Configurations on the settings and software for the two laptops are almost identical in all other respects.

  Sorry for the delay.  After having just tried with the Sata Driverss AMD and the AMD Catalyst drivers from HP and direct AMD regret to inform that the results are much the same.

  Also online and found a user with a similar motherboard AMD based running a comparable SSD.  He was asked to compare how fast sound SSD race with mine and compared both with how fast SSD manufacturers say the random read/write time should be.

  The line at the bottom is the user that had the same experience I did, I found.  Both of us see the read/write random times on our SSD, which is much slower than what we get on motherboards Intel based with the chipsets Intel and Intel Sata AHCI controllers.

  Guess that's just the way it is.

  This is my opinion only. Someone else may have different results.

• Installation driver SATA T410s

  I have a stable of machines T410s supplied with XP Pro loaded. I need to install Exterprise XP Pro. Unfurtunately, once the version Enterprise edition is installed, the SATA driver not install and we're stuck in the Compatibility Mode.

  I have the driver (from the machine NIB and Web site) and try the gorging method (update driver / do not search / must drive/point iaStor.inf IMSM folder [taken from web download and installation of WinXP Factory]). The blue machine during the installation screens. Anybody get a load this driver?

  Hi bhnelson,

  I don't know exactly what steps you have taken, but I think what might be the problem is that you have never run the install.cmd.

  Try to download this driver, run to extract and it should be under 'C:\DRIVERS\WIN\IRST ':

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-74431

  (optionally you can download a more recent version of this driver directly from Intel)

  Then follow these steps (since you already have Windows XP running and set of compatibility mode I guess you could start with step 9):

  1. turn off the computer.
  2. turn on the computer.
  3. press the F1 key to enter the BIOS Setup utility when the ThinkPad logo is visible on the screen. The BIOS configuration utility menu will be displayed. If a password prompt appears, type the password.
  4. Select Configuration.
  5 Select Serial ATA (SATA).
  6. Select compatibility.
  7. press the F10 key to save the new configuration, click Yes.
  8 restart the computer.
  9. go on C:\DRIVERS\WIN\IRST\PREPARE, and then double-click install.cmd.
  10. power on the computer.
  11. press the F1 key to enter the BIOS Setup utility when the ThinkPad logo is visible on the screen. The BIOS configuration utility menu will be displayed. If a password prompt appears, type the password.
  12. Select Configuration.
  13. Select Serial ATA (SATA).
  14 select AHCI.
  15. press the F10 key to save the new configuration, click Yes. The computer will restart and Windows XP will start.
  16. the "Welcome to the new hardware detected" appears. Click on no, not this time and then click Next.
  17. Select install from a list or specific location (Advanced) and then click Next.
  18. Select search for the best driver in these locations. Select include this location in the search:, specify the path, C:\DRIVERS\WIN\IRST, and then click Next. The "completing the new hardware found" appears.
  19. click on finish.
  20. when the "System settings change" window appears, click Yes. The computer restarts.

  -gan

• Driver SATA problem

  Hey guys,.

  while I lived in Vista and Win7 disembark for awhile... I have 2 x portable computers HP (6530 b & s 6530)

  I need to run Windows XP.

  The question is not the installation of the operating system... I have it working fine... the problem is to install a new driver for storage

  If I can return them AHCI.

  The two laptops are using a driver of 2001 on the storage... I downloaded the 2010 HP driver

  but on installation, I get...

  "This computer does not meet the minimum requirements for installing the software. The Setup will exit. »

  Google is not very useful as this error is everywhere... What Miss me?

  Will not install the SATA driver with the HDD running in IDE mode. Sometimes, you can extract the driver in a folder and make a update driver controller device pointing the Assistant Manager to the folder. Reboot if you can solve the AHCI in the BIOS and boot, you're good.

  Best option use Nlite to integrate driver into a new XP installation cd and install that way. After installation, I believe you can also solve the AHCI and boot with the cd and do a repair to facility running.

• Recommended update driver wireless router

  After we connected a new router, the Assistant HP invited to "update driver broadcom 802.11n wireless LAN".  I clicked download and to during the installation process has received the message, like him best as I can remember, "wireless would be disconnected... '. "Does this mean that temporarily?  .. .or what?  My router works well and I don't want to rock the boat.  What this warning?

  We have desktop HP, P7-1210. with Windows 7 SP1.  Our router is Linksys E1200 NP, V.2.

  Can someone give me insurance it's ok for the driver installation (update).

  Here are the specifications of your desktop HP Pavilion p7-1210. Here are the drivers of HP Pavilion Desktop PC p7-1210 & download page if you need to download a driver of origin.

  Yes, the messsage means a temporary cut of the wireless adapter. After the new driver is installed and Windows is restarted (if necessary), you should get your return wireless connection.

  Please click the White Star of KUDOS to show your appreciation

• Re: update driver Marvell Yukon ethernet on an Equium A300D

  A month ago, I think it was I got an alert on the Toshiba Tempro tool for updating a driver for Marvell Yukon ethernet on my laptop driver. I downloaded the zip file by following the instructions on the site of Marvell (an updated driver was published on 18-08-08) and tried to install it, but that's when I hit a problem. When I try to install it tells me that a previous version is already installed and uninstall the previous version first.

  The problem is when I go to Device Manager and try and find the driver, the only entry is for a 'Marvell Yukon 88E8040T PCI-E Fast Ethernet controller', but the driver I was prompted to install was one of Marvell Miniport driver.

  At the time I just ignored him, thinking that the update was not relevant for me, but since then, I had a number of BSOD - the last afternoon - and in all cases when Windows has finished it's error report, it returns with advice that I need to update of the Marvell Yukon Semiconductor driver... and directing me to the download as I was originally directed worms by the Tempro alert. Of course again, it says I have uninstall the previous version before installing it, but as I can't find an earlier version of the Miniport driver to uninstall there is nothing I can do about it, even once I ignore it. Everything seems to work fine (apart from my current ignored problems of internet with my wireless connection and the fact that I can't seem to set up a connection wired (perhaps because this driver issue?), but sooner or later I get a BSOD even once, he accuses the Marvell Yukon driver so I'm back to square one.) I had the time BSOD now 4 or 5 in the last month.

  All advice appreciated.

  Hello

  Have you tried to restore the operating system to an earlier time using System Restore tool?
  Try it and let us know if everything works well again. If you leave and be happy without updates.

• Impossible to update driver nvidia on Satellite P25-S507

  I followed the instructions:
  1 uninstalled the original nvidia driver
  2. install the updated driver downloaded from www nvidia page.
  3. it has been WITHOUT RESULT. The new driver is not installed, so I had to reinstall the older driver
  4. as a result, I can't use OpenGL 1.5 and my generated interpretations are of poor quality.

  So: Why can't update the driver nvidia?

  Hi, any idea on a Machine we, sorry

  Good bye

• Pavilion s5120f: updates driver Windows 7 for Pavilion s5120f

  I need to find a updated driver of LAN for the mentioned above, desktop PC so that I can upgrade to Windows 7 64 bit of Vista 64-bit. I understand that this driver is not provided alone, but as part of an overall package of driver update. Might not seem just to find the right page.

  Charlie

  Hi, Charlie:

  Download and install this driver and restart.

  http://www.nvidia.com/download/driverResults.aspx/14875/en-us

• Satellite R630 - Message about the update driver WLAN

  I get the message driver LAN Wireless update. Have tried several times but still get the same result, messgae I need to update my driver wireless lan.

  Appreciate any help

  Hey Buddy,

  What program tells you that you need to update the driver WLAN?

  In General if everything works properly, there is no reason for an update driver.
  Never touch a running system! ;)

• Satellite Pro L300: x 3100 and updated updated driver chipset Intel 965 graphics

  Has anyone installed the Intel 7.15.10.1666 driver, dated 02/26/2009 for the Mobile 965 chipset? Here is their web page to download:

  http://www.Intel.com/support/graphics/intelgm965/

  Toshiba Satellite Pro L300 doesn't work for some reason unknown to me, with the automatic update driver Intel (download containing the executable file). Therefore, I followed the instructions for manual installation (the download with the zip file).

  My laptop works fine with this new driver, and there is a clear improvement in the transitions between images when you use the option to Windows presentation (slideshow).

  This new driver installs also 3 Intel graphics programs:
  For the management of the display function keys
  Access to the system tray
  Wizard TV

  I used Windows Defender to remove these 3 programs that load automatically at startup of the system to maintain a fast startup time and not loading unnecessary programs in memory. There is no me no problem.

  Why Toshiba has added that this to the driver download page?

  Hello

  Thanks for this second info...

  > Why Toshiba has added that this to the driver download page?
  Who knows maybe it has not been verified, approved and tested by Toshiba?

  As far as I know every phone manufacturers test and approve drivers before they will be released in the pages of pilot
  Perhaps, it has not been approved...

  However, it s good new that this driver works correctly.
  I'll check it too on my laptop.

  See you soon

• Update Driver Realtek ALC888S?

  Hello

  I put a lot of work perfecting my PC video and audio over the past 2 years, the PC in question is one p6313w of HP.

  I had installed a powerful graphics to the computer, a surround sound equipped and the whole lot.

  One of the things I did, one day I got a wild hair and decided to update all my drivers. Video and audio to be exactly.

  In this process, due to not knowing where to go, I had picked up a unique Trojan horse, which has my AV had eliminated easily without problem.

  Also, I had messed up my sound in fact and had to default from the original.

  Given the way I am with tinker around on computers, I continued and eventually found a new driver for my sound card.

  In this new edition, instead of having a list of styles for the equalizer to choice, I had a full blown Equalizer I could color tone and adjust. After playing with him every day for several months, I was absolutely perfect. Had amazing bass and treble sounded quite realistic.

  That being said, I turned off and tried my old style of the equalizer, I chose months back, and it was so false sounded I couldn't because my toned custom Equalizer was much, much better.

  I've never had problems with my computer, only that I had so much stuff on it gathered over the years, I decided to clean.

  Instead of each individual program one by one, I backed up EVERYTHING on a terabyte USB HDD. One of the things that I couldn't back up is this updated driver.

  I rebooted and put things up. Everything is running smooth as always (Freaking Love HP computers).

  I entered a game then has heard the noise and was screaming, I forgot to get the update of the driver.

  I was always happy with my speakers and their sound, but after hearing what could do a custom equalizer to adapt to my own ears, I can't I ever get back to the base driver.

  The problem is, I have absolutely no idea where to find this time, as it took days for the last time.

  My PC is a HP p6313w.

  My sound card is a Realtek ALC888S HD audio model.

  The current driver is dated as 15/09/2009 and the version is 6.0.1.5938. It is the base and default.

  Can someone please, please point me to a version later than 6.0.1.5938?

  I checked the Web to Realtek site, maybe I'm just lost in their repertoire, but I have yet found a driver for it.

  And I went to her, open my driver properties and then additional and properties as before 'Update Driver' and 'Roll back' are grayed out. Yet, I found some how an updated version of what I have before long ago. So I DO not know it exists, and I don't know that the 'Update Driver' button is not how I got it.

  Can someone point me to a newer version on top? My sound now I can't live without having hemoraging of brain, but I still don't like it. For me it is necisary and I only ask someone to direct me towards a new driver.

  The reason for the last statement, I read on several sites, many people refuse to help people who want a newer, better version saying ' if it works - YOU - don't - NEED - a patch, suck it up and live with him. "as a general tone of what is said to be that person.

  You are the very welcome.

• Update driver for ATI Mobility x 1400-Satellite Pro A100

  Hello

  I have the above card in my Toshiba Satellite Pro A100. Does anyone know if Toshiba published or publish updates driver for this card and if so, how to get them?

  Thnx

  Macca

  Hello

  To be honest, there is no much of philosophy. If Toshiba offers updates, these drivers will be available on the Toshiba support page. If it isn't...

• HP Color Laser Jet Pro M452dw: no automatic duplexing after update driver

  Installed the updated driver and software M452dw.  I can't print any documents usng the automatic duplex function.  I changed the printer properties from one side of 2 sides, but the feature screen always manual duplex printing.  I have been using automatic duplex printing since I bought the printer in November 2015.  Something must have gone wrong with the update or it does not update correctly.  Suggestions are welcome and/or corrective action to fix the configuration.

  You will need to go to devices and printers and right click on the printer icon and scroll first and left click Properties. Now at the top of the page click on device settings and then scroll down to the duplex of change not installed and installable options at installed and apply and save the settings and it should now work as you wish.