HP Color Laser Jet Pro M452dw: no automatic duplexing after update driver

Similar Questions

• Color Laser Jet MFP M277dw Pro: Color Laser Jet Pro Scan to network file

  I'm trying to implement the network folder with my Color Laser Jet Pro M277dw and my MacBook Air with OS X 10.10.5 MFP scanning.  I've implemented the SMB shared folder as indicated, you can see here where I gave everyone access read/write:

  

  On the HP management page, I put in the path by using my IP address, as suggested in this article.  However, the connection test is always a failure.  Could someone give me some advice?  Here's what I came in the form of HP:

  

  Thanks for the help!

  Of course

  You can find the firmware on the page of product below:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Kind regards

  Shlomi

• jet pro m277dw mfp color laser: color laser jet pro pilot m277dw MFPs linux?

  Hello

  I just got a new allinone HP (color laser jet mfp m277dw pro).

  I'm using linux mint (Ubuntu) 17.

  It prints fine, but I can't scan.

  Its connected as a network printer.

  Is it supported?

  How can I make it work?

  Martin

  Hello!

  I just needed a latest hplip.

  Works great!

  Thank you very much

  Martin

• HP Color Laser Jet Pro CF394A: no option automatic duplexing on M452dw

  When installed first of all print automatic double-sided. After that automatic driver update duplex isn't so more one choice of option is manual duplex or none. Very frustrating. We bought it because of the automatic duplex feature.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• Color Laser Jet Pro M252n: LaserJet Pro M252 does not install

  I am trying to install a new printer. It hangs at 99% and then I get the following message. I tried several times but I still get the same result (or rather non)

  @mg14, welcome to the Forums of HP, it's a great place to get help, find answers and advice.
  Thanks for posting your request, I'll be more than happy to help you.

  I understand that you are facing problems with your HP Color LaserJet Pro M252n in which the installation of the software stops at 99%.

  Don't worry because I have a few steps that should help you to solve this problem.

  This problem may occur if the latest drivers are not installed.

  Please follow the step by step guide to download and install the latest drivers from the link: software and Driver Downloads

  Let me know how it works.
  I wish you a good day ahead.

• Color Laser JEt MFP M477fd Pro: automatic update of ruined printers print

  My new laser Jet worked very well until I followed the instructions on the printer for an automatic update. Now print is ruined. Page layout is described in gray, and look bad color photos. This happened DIRECTLY after that I said yes to the screen to update printer on the printer itself. I did not change my Mac.

  I tried closing printer, computer shutdown, and then restart the printer, then restart the computer.

  The Configuration report (can barely read.) Firmware Datacode says: 20160331, which is apparently the most recent printing for my model software.

  I'm on a Mac 10.10

  Color Laser Jet Pro MFP M477fdw, bought end of 2015.

  The printer was so easy to set up and worked wonders for 200 pages that I sent to him so far, until I said yes to an update. Wish really to say yes to that, but I just assumed it would work as well as everything else.

  Thank you for your help to solve this.

  After trying countless things, including uninstalling and reinstalling the printer and download the latest driver, I called Technical Support. The number is on the internet, not on HP. 800-334-5144 where you need it. They continue to try to trick you online, but eventually, you get to someone who can help.

  When I described the print results, I was getting, she had me do the cleaning Page, 3 x and 3 x color calibration, which corrects the problem.

  The problem of updating firmware with the trainer, is what I * think * she said.

  If your printer works fine... DON'T let NOT download an update.

  It has been long since I've owned a laser printer. Lesson learned. Thank you, Natasha.

• HP Color Laser Jet MFP M177fw Pro - Scanner Error 22

  I get the same Scanner Error 22 on the Color Laser Jet Pro MFP M177fw like many others have posted.  Tried uninstalling\reinstalling the software and tried the most common loading drivers but Scanner error prevented this piece of finish.  Support and I was told we would have to pay $49.95 for them to help us solve the problem.  We just bought this printer 5 weeks ago.  Is this all we can try?

  Thank you!

  Thank you for your response. This solution does not solve my problem. HP customer service had travelled me several tests (took about 20-25 minutes total) but ended up sending me a replacement printer. It arrived within two days and so far, the replacement works great. HP has also paid to have the original shipped in return. The process was fairly hassle.

• Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

  Hello

  What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

  Thank you very much

  Paul

  Hello

  No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

  http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

  Kind regards.

• Laser Jet Pro 200 M251nw color: print job stuck in the queue

  I have problems with my color Laser Jet Pro 200 M251nw. I can print a MS word document and the printer works fine. When I try to print a second document MS word, that work remains stuck in the tail (spooling). I can't remove it from the queue. If I restart the computer, it went from the queue. If I print another document the process starts again. I know the procedure to remove a document from the queue but what I need to know is how to prevent them from getting stuck.

  Hello

  Please try the solutions in this doc.

• Color Laser Jet MFP M277dw Pro: frequently updated software

  I am the owner of a color Laser Jet MFP M277dw Pro. I get updates almost every week, and the software update is very strange. I'm clicking on the update system, it takes a lot of time to meet up with the text saying I'll remove the actual update or add another device. When I say no, thanks, I'll get a message saying that my update was successful (but only if I have to cancel this message). I don't understand why I have to go through this illogical question. Also, I don't understand why it is not necessary to update very frequently, especially when there is no explanation of the reason why.
  
  The two just exclamation points annoy me because I think that there must be a problem with the software, even if the printer works well.
  
  Sincere greetings
  
  Arne H. Wilstrup
  Denmark

  AHW

  Greetings @ahw,

  Thank you access the Forums from HP Support for extra support! I see that you have problems with updates of window for the printer software. I'd love to help you.

  Given that the printer works, I would say to hide updates.

  A poster tried to show or hide updates and it solved their problem.

  • How to "hide update" during the Build 9926
  • Need for the old Windows Update, not the new Windows Update
  • Windows 10 - where is the 'hide or show updates' hidden feature
  • How can I hide this update in Windows 10?
  • How to hide Windows Update, Windows 10 build 10061?

  You can also give your feedback to Microsoft, and if all goes well, they will release an update to correct the function of the operating system. You can learn how here; Updates and feedback.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• Laser Jet Pro CM1415 model cold color MFP

  I have a HP Laser Jet Pro CM1415 model cold color MFP model # CE862A. He jumped because of a power surge and the local hydro company is taken full responsibility and is willing to replace my camera. I can't find a comparable unit to give them as he does not seem as Lexmark sells the most. Which model do you propose that I propose to replace?

  Thank you

  Models of different devices will be available for different regions of the world and you can browse your specific country hp.com web portal or visit the nearest HP sales partner/Office for more details.

• Laser Jet Pro 100 color M175NW MFP

  Hello

  I just bought Laser Jet Pro 100 but have problems to do the installation despite trying several times.

  Initially, the installation seems to work very well and I was able to print out a few pages until I turned off the printer and turned back on again, the impression doesn't seem to work more.

  Attempts to re - install the printer also failed. The error message indicates that the installation takes too long and asked the facility to perform again.

  I get very frustrated for this printer. What should I do now?

  Thanks for your advice.

  I would try a suggestion more. Could you try to install this printer on another computer. I want to see if the installation fails or not. If so, then I will help you. If not, then there are someone on this Windows 7 computer that blocks this facility to settle. Please post your results.

• Laser Jet Pro MFP 177fw: cannot scan with Laser Jet MFP 177fw Pro

  I have been using my 177fw Laser Jet Pro MFP on a Mac 10.10 for awhile.  Print, fax & scaning all worked.  I can scan is no longer.  I get the message "the scanner has not completed analysis" (there may be another message before that but it crushed until I read.).

  I use a USB cable for the connection.

  On August 31 I got HP Printer Software Update Verson 5.  What is my problem?

  Thanks for your help.

  Hi @scg117,

  Welcome to the HP Forums!

  I noticed your post about how you can't scan with your MFP HP Laserjet Pro 177fw on your Mac. And I'm happy to discuss this issue scan for you!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  To copy:

  1. load the document on the scanner glass according to the indicators on the product.

  2. close the scanner.

  3. on the product control panel, press the button number of Copies.

  4. Select the number of copies.

  5. press the black start copy button or the button color launch copy to start copying.

  Let me know if it works, or if you see another error message.

  If the copy works, then try the steps described in this guide, Scanner USB connection is lost (Mac).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• HP Laser Jet Pro M251 nw: HP Laser Jet Pro M251 nw do not print Green

  I use a HP Laser Jet Pro M251 with Mac OS more recent Sierra 10.12. I tried to print a document in color from Excel and others a good percentage of the document should be printed in green. Instead of green, a very light, in some cases the struggles of the naked eye to see light YTYPE prints instead of GREEN. I then ran a test of the printer color page of the utility application of HP and there is no green anywhere on the page.

  All of my cartridges are 80% full or higher and I use the same newspaper, I am using since I bought the printer a few years ago. Indeed, nothing in my usual routine (for example all consumables and accessories) has changed. So, for the most part, my printer is not good for color printing.

  If anyone has had this problem and, more importantly, knows how to fix? I don't want to buy a new printer, but if I do, and if this problem is not easily corrected, I will not buy another HP. I'll check Consumer Reports to get advice on a new laser printer. I really liked this good printer and have, until today, thought it was an absolutely fantastic printer.

  Please help if you can. Thank you for your useful answers.

  RG

  RG

  Just a tip, I discovered the problem. It turns out that the Cyan cartridge was not good.

• HP 2840 color laser jet: scanner no longer works

  Our HP 2840 color laser jet parser component has stopped working, any suggestions on what is the problem and the solutions possible?

  We already tried updates of pilot, suggestions of shoot of problems that arise automatically, and simply turn the device. Copy always unit starting from the plateau.

  Hi and thanks for the information.

  This morning I just restarted the computer and who got the scanner going again. That said, I can always check the driver software and try these links to determine what really happened. Also, the computer is running windows 7.

  Thanks again for taking the time to post a reply!