Update drivers and install software recovery disk!

Similar Questions

• Once I reset my battery CMOS from one day to the next. I tried to install my recovery disk this morning and can't get it done

  Once I reset my battery CMOS from one day to the next.  I tried to install my recovery disk this morning and can't get it done.  I kept receiving an error of 100.
  Don't know what to do.
  Are there out there can HELP?

  Please, I beg you!

  Thank you

  Hello

  Would you please ask the same questions more then once in these Forums.

  What you're doing is confusing in these Forums, as nobody else knows what advice are envisaged for you in other responses.

  Other questions, it seems you have an HP computer.

  Here is the information of HP for Vista from recovery to factory settings:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.
  

  NOTE: perform the recovery process by using the custom recovery disk you created can take less than an hour, whilst using the replacement disks ordered directly from HP can take four to six hours and includes several reboots.
  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.
  Use the recovery discs to restore the PC by following the steps below.
  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. etc.

  If you are having problems using the HP recovery process, you will need to contact HP, because this is Recovery process HP, not Microsoft.

  Details of HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  You can also try the Forums from the HP Support:

  http://h30434.www3.HP.com/

  See you soon.

• EliteBook 850 G2: SimplePass absent of the software recovery disk

  Hello

  First of all, I don't know if I post the question in the right place, and I apologize if I'm not.

  I bought the laptop with windows 7 and received two CDs with it, one for install windows 10 and the other to re - install the software that came with the computer.

  I used a program before moving on to Windows 10 * that has been activated with my finger, saved my passwords, and I was able to connect to my windows with the fingerprint account.

  After the upgrade to windows 10 and install all of the software contained in the software recovery disk, I can't find this program.

  This software should come in the recovery disk? Why is it missing? How can I get that again?

  * which I'm not 100% sure it was SimplePass

  @hpatricia

  Your enterprise class system uses a software Client Security (not SimplePass).

  Page of the site system Web pilot:

  Laptop HP EliteBook 850 G2

  The Synaptics (fingerprint driver) driver is in the category

  Driver - keyboard, mouse and input devices (5)

  Download Driver Synaptics and information Page:

  Synaptics WBF fingerprint driver

  

  The security software is in the category

  Software - security (1)

  Client Security download and information Page:

  HP Client Security Manager

  

  Load / install the fingerprint Synaptics first driver >

  Restart and sign

  Windows key > settings > accounts > Sign-in Options >

  Assign an identification number (Security Windows requires to enable the fingerprint reader) >

  Activate the connection of fingerprints

  Once the Windows PIN / fingerprint is activated, load and install the Client Security program >

  Restart and sign

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

  Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
  If I need to can replace it where I get an older version?
  Thank you

  Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  The latest support for your operating system version is 3.6.26 , you are fully updated.

  For more information, see:

  Firefox 3.6 system requirements

  Firefox 10 system requirements

  [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Creative cloud updates for after effects CC, CC InDesign, Premiere Pro CC and CC FAIL ALWAYS Prelude. Other updates arrive and install, but not those four.

  Creative cloud updates for after effects CC, CC InDesign, Premiere Pro CC and CC FAIL ALWAYS Prelude. Other updates arrive and install, but not those four. This happened more than three months. When Adobe will fix this?

  Mac OS 10.9.2 and 10.9.3

  I ran repair disk, I run permissions repair several times. I've disabled the creative cloud together apps and uninstalled and reinstalled and it's always the same.

  Please fix this Adobe, or disclose information about how to solve this problem. I have to pay for that month and you are NOT fix every month.

  

  These errors appear in the Console:

  17/05/2014 13:35:08.732 Adobe Application Manager (Updater) [55745]: /Volumes/AdobeMediaEncoderTrial_64-7.2.2-mul-AdobeUpdate/AdobePatchInstaller.app/Contents/MacOS/AdobePatchInstaller reading: unknown error: 1000

  17/05/2014 13:35:08.732 Adobe Application Manager (Updater) [55745]: error during the processing of the data: invalid argument

  17/05/2014 13:35:08.000 kernel [0]: hfs: disassemble insiders on AdobeMediaEncoderTrial_64 - 7.2.2 - mul-AdobeUpdate on disk2s2 of the device

  17/05/2014 13:35:22.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:22.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:22.673 Adobe Application Manager (Updater) [55765]: /Volumes/AdobeMediaEncoderTrial_64-7.2.2-mul-AdobeUpdate/AdobePatchInstaller.app/Contents/MacOS/AdobePatchInstaller reading: unknown error: 1000

  17/05/2014 13:35:22.673 Adobe Application Manager (Updater) [55765]: error during the processing of the data: invalid argument

  17/05/2014 13:35:22.000 kernel [0]: hfs: disassemble insiders on AdobeMediaEncoderTrial_64 - 7.2.2 - mul-AdobeUpdate on disk2s2 of the device

  17/05/2014 13:35:41.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:41.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:41.046 Adobe Application Manager (Updater) [55783]: /Volumes/AdobeMediaEncoderTrial_64-7.2.2-mul-AdobeUpdate/AdobePatchInstaller.app/Contents/MacOS/AdobePatchInstaller reading: unknown error: 1000

  17/05/2014 13:35:41.046 Adobe Application Manager (Updater) [55783]: error during the processing of the data: invalid argument

  17/05/2014 13:35:41.000 kernel [0]: hfs: disassemble insiders on AdobeMediaEncoderTrial_64 - 7.2.2 - mul-AdobeUpdate on disk2s2 of the device

  17/05/2014 13:35:55.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:55.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:55.068 Adobe Application Manager (Updater) [55800]: /Volumes/AdobeMediaEncoderTrial_64-7.2.2-mul-AdobeUpdate/AdobePatchInstaller.app/Contents/MacOS/AdobePatchInstaller reading: unknown error: 1000

  17/05/2014 13:35:55.068 Adobe Application Manager (Updater) [55800]: error during the processing of the data: invalid argument

  17/05/2014 13:35:55.000 kernel [0]: hfs: disassemble insiders on AdobeMediaEncoderTrial_64 - 7.2.2 - mul-AdobeUpdate on disk2s2 of the device

  

  KHolz I recommend you review the files Setup logs to update Adobe that you are trying to apply.  Please see Troubleshooting install problems with log files. CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for more information on how to locate and interpret your Setup logs files.  You are invited to post specific errors that you will discover in this discussion.

• Windows Update download and install when my PC is in mode 5000mAh?

  Will windows update download and install when my PC is in mode 5000mAh?

  Hi Hassan,.

  You will not be able to plan / run Windows update in standby mode. It can be in "idle" mode or when executing system.

  I hope this helps.

• Differences between "View Update History" and "installed updates".

  I have discrepancies between "view update history" and "installed updates".  Updates do not match and there are a lot of differences.  I'll try and link to an extracted image so you can see the differences.
  I have a Gateway GM4574 with an AMD Live 64-bit processor, but am running Windows Vista Home Premium (32-bit) SP2,
  I found this problem when certain Office updates (KB2760411, KB2760583, & KB2760588) kept wanting to be installed over and over.  This problem is now resolved.
  Here's the problem I'm having now...

  When I compare what follows, I come with a LOT of contradictions:

  (a) Control Panel, system and Maintenance, update Windows, view update history

  (b) Control Panel, programs and features, installed updates

  
  

  Please see if your system has the same problem.  I don't know if it will work, but I'll try and link a picture of the views of two control panel so you can see the differences.  Just look at the dates of arrival and you will immediately see there are problems.

  
  

  Here is the link to an image I've snipped: https://skydrive.live.com/redir?resid=95DC3CEDE6DDD9BD! 814 & authkey =! AEwfCYrNsbmnUk0 & v = 3 +

  When you click on the link and the page opens, look down the page and you'll see a thumbnail of the image.  Right-click on it and click View Original.  It looks better this way.  It is easier to read.

  Again, I didn't know you can see updates two of 2 different ways, but there are a lot of updates do not appear on the installed updates that appear on view update history.

  I'm worried about this because I don't know whether or not updates are really installed.

  Any help would be appreciated.

  
  Sincerely,

  Dennis

  History is not important, it's the installed updates that are important.

  At a certain stage, you can reset Windows Update, thus losing your history, or may have installed updates manually.

  Don't worry about this. As long as the computer is updated and the updates are listed under "installed updates", it is essentially.

• Windows update downloaded and installed sp1 and sp2. Both show as successful in the history of the update but does not show in 'the computer properties.

  Windows update downloaded and installed sp1 and sp2. Both show as "successful" in the history of the update however my computer properties tab represents OS is Windows Vista Home Premium and shows no indication of SP1 or SP2. Is there a process of 'activation' these? Should not be done automatically? Any help is appreciated!

  Hello

  Thanks for posting the request in the Microsoft Community.

  Method 1:

  I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Step 1:

  I suggest to refer to the article and try to run the system update tool:

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  Step 2:

  You can check the link and try to obtain the latest Service Pack for Windows Vista:

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Let us know if it helps.

• Qosmio G10-133 - Install Qosmio Player and using the recovery disk

  Hi again.

  My g10-133 was the mother of uypgraded installed by Toshiba that there are back and forward in his first year with problems of graphics chip, so they installed the motherboard with the 6200 chip chart.

  Until very recently, I installed Windows XP to one of my dead computers that I've ever had anywhere with my original recovery qosmio disc such that it has been damaged. I recently bought an other G10 as I wanted to replace the keyboard and display and it came with disks,

  I put in a raw player. I used the recovery of the Qosmio player disc, and this indicates that it is complete. I then installed the Toshiba Recovery disk that has Windows MCE on it. (I have now three original copies of the present). But when windows go to start, the computer gets past the Bios and then quickly goes to the blue screen of death... I tried to use break so that I can read this, but it does not work. I tried more than a windows disk, but not joy. I also had special instructions for Toshiba, which has the Qosmio updater on him, and also another drive which has some additional drivers.

  So far, I've tried all sorts and whenever I go to start the laptop, it crashes. The Toshiba recovery disc has two methods that an automatic and a step forward on (which I don't have a clue how to use). The automatic, which does not implement the normal windows installation, but evokes a Toshiba says... and it goes from 0% to 100% and ends each time.

  If I use my Windows XP disk from another pc it install fine. and the laptop is fine until it reaches download Windows SP3, which seems to slow everything down.

  I would like to install the Qosmio to style factory if pos.

  What you need to help your service provider which has replaced the motherboard. A long time ago I heard talking of this and what I know is that the machine must be ready for use: This means service must update the BIOS, verify compatibility of memory, RAID functions are not the same, Bios, EC/KBC and DMI must be updated and rewritten. The laptop owner must be willing to work with new hardware components.

  If I m remembering well this new mainboard has different chipset and recovery image that you are trying to install has really bad drivers inside. With other words: after the Exchange system motherboard drivers and the Qosmio Player require an update.

  You know the whole process is a bit complicated, but, as far as I know, Toshiba service provider must send you instructions for Qosmioplayer update and instructions for the update tool.

  At the moment I can't help you. Please call again and ask for help. If you will not get any help it let us know.

• Update drivers and software on the Satelite P750-10 q

  Hello
  I bought Satelite P750-10 q.
  Œuvres laptop slow in my opinion. I wanted to update all the drivers for your laptop, but I have not found a software that can automatically check the system drivers.
  And question: how to check updates?

  xadamus

  Hey,.

  > Laptop works slowly in my opinion. I wanted to update all the drivers for your laptop
  If the laptop is slow, new drivers will not help you. Updates driver don t increase performance, it s introduce just fixing, support of new products, etc., but not more.
  Besides, P750 is brand new model so I think that the latest drivers are already installed.

  > How to check updates?
  Either you do it yourself on the official website of Toshiba or use the preinstalled Toshiba TEMPRO.

  Another point about the slow speed:
  Of course, this can have different reasons and without going through your laptop in front of me I can only speculate on the reason for the possibility.
  But it s always advisable to check the start up programs. This can be done in msconfig > Startup tab. You can find a list of all the programs, they start with windows too. Some programs such as Support Button Toshiba cards Flash, etc. are necessary (in this case for the FN keys) but other programs such as Adobe Reader, Microsoft Office, Skype, ICQ, Java AutoUpdate, Toshiba zooming Utility, etc. can be disabled (unchecked). This will improve the performance of many. Windows starts and runs faster RAM of the freer and less HARD drive activity.

  Also defragment the HARD drive at any time and check the installed software. You can remove the evaluation version and other things that you no longer need.

  I hope that helps! :)

• Re: Is it possible to create the current configuration of the software recovery disk?

  I recently bought A350. Next to the standard software provided by Toshiba, I bought and installed other products such as Norton Internet Security, update all drivers, etc..
  Is it possible to create a recovery disc on my current setup of the software?

  I know the recovery disk, but it will only restore the original configuration of the software. I don't want to go through all the pain of installing other products and update all the drivers.

  I have been using other software like Acronis Disk recovery, but I don't know this recovery cd created by these third party software can be used.

  Everyone has known about this?

  Hello!

  Boyfriend sorry but it is not possible to create a recovery disc with the current configuration of your software. The Toshiba Recovery disk contains the factory settings and t, you can integrate additional software to the image.

  If you want a picture of your laptop with your special software, you need to use another program like Acronis image. So you can make an image of your HARD drive with all your settings and software.

  Good bye

• Re: Satellite L300-10 q - cannot install the recovery disk with XP SP2

  Hello

  My laptop started giving problems (slow start & suspended inbetween) so I tried to re-installation with installation disk but recovery whaile there ask lang. & confirmation of removal of data and after the installation of minutes collapsed & turn in DOS (X :) for admin.

  When I restarted labtop it shows Bootmgr has failed.

  So I contact customer Service & they replaced the HARD drive with new, but still the same problem.

  I even tried to install XP SP2 after copying the files, it displays HARD drive not found.

  Pls help

  L300 - 10 q series

  Pls advice also how to check Windows XP is 32 or 64 bit?

  Thanks again

  Alvares

  If you try to install your laptop computer with the Microsoft installation disc, you need the SATA drivers. You can find it on the Toshiba site.
  You must load the drivers of an external floppy drive or you integrate into a new CD with nLite (www.nliteos.com).

  For the recovery disc you n t need these drivers because they are already on the disk.
  If you get the same problem with the recovery disk, you should check your disk with Drive Fitness Test (Google is your friend).

• Re: Need creative software recovery disk for Satellite P300

  Need recovery disk creator software *

  Hello I have a Toshiba Satellite P300 and I had installed XP as an operating system, but I want to go to the rear for to use Vista. Now I need the Creator program recovery disc but I can't find anywhere on the site. Help, please

  * Information. *

  Any new laptop?
  YES.

  Always use original pre-installed Vista?
  N °

  Made some changes to the operating system as the deletion of partitions or install own OS?
  YES.

  The "HDDRecovery" folder available on the second partition?
  YES.

  Hello

  In your case there is nothing you can do. The recovery DVDs can be created only if the laptop is factory settings. Unfortunately, you have removed original preinstalled Vista and now there is no way, you can create recovery media.

  Sorry, but there is only one thing to do now to order a new copy. You can do so under the https://backupmedia.toshiba.eu/landing.aspx.

  I really wonder that you ignored the reminder to create recovery DVDs.

• Last updated drivers and satellite P750

  I am also asking for help, but in general, I am a novice computer user.

  Recently I ve noticed my laptop on a go slow and it took especially at his age and also the internet connection like that that its mainly intended.

  I decided to do a reset to factory and then put to update all drivers Toshiba had on the support page of which some are not directly part of Toshiba.

  In any case, my only complaint is that why you support drivers Intel.
  Since I found that many of my internal components are obsolete as pci, HD graphics card and wireless, sound, chipset, usb controllers, adapters and I think I even think that the bios is outdated...

  Ask any competent person here who knows how I can find an update of the bios for the P750 Satellite that will detect everything that is out of date, as I am struggling to source some drivers and do not want to install the drivers intel hurt.

  But shame on you, Toshiba to not to give your laptop a mention that Intel drivers may be needed or have them on your download page, it would be really useful...

  I've been using drivers from 2010 in some cases

  I'm not quite sure what Satellite P750 youhave exactly, but the latest BIOS is on the page of the Toshiba UE m driver:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  It seems that 2, 80 - WIN BIOS is the latest available version, even though it was released in 2012.

  As you probably know, the BIOS isn't a party that will be updated and maintained on a regular basis. If everything is OK, the BIOS didn't need updates.

  Also other software or drivers Toshiba would be updated by Toshiba in case something would be wrong
  As you know, Toshiba released many series of the laptop. A lot of the new laptop series supports the same pieces of equipment such as Intel, modules Wlan chipset or graphics cards.

  Drivers released for these units can be used also in your laptop. Of only if course your device supports the same pieces of equipment.

• Win 8 upgrade to Windows 7: users do not need to reinstall the drivers and application software not?

  Hello

  I'm fascinating to read entire article on upgrading to win 8 to http://windowsteamblog.com/windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-windows-8-pro-for-39-99.aspx

  A part of the article reads; "You will be able to upgrade a version of Windows 7 to Windows 8 Pro single-station and along which includes your personal files, settings and Windows applications"

  My Win 7 Pc has MS Office 2010, Antivirus, MacAfee, PC Dell drivers and other applications. This means that I am not required to reinstall all that software? that is, it will be automatically postponed to Win 8 OS.

  If this is the case, it will save a lot of time, effort and downloading of costs during the update of data.

  Thank you

  Low

  Yes, you can upgrade from Windows 7 to Windows 8. See the following topics:

  Install, upgrade, and activate

  • The upgrade from Windows 7 to Windows 8