Update fails: KB971644 8007371B and KB970710 error 80070490 error

Similar Questions

• Vista Windows update fails to install and gives error code A 80071, 30

  Windows Update for vista not install and give the error code A 80071, 30. How do I receive the updates installed and what is this error? Stem

  Original title: windows update error code a 80071, 30

  Hello

  Method 1:

  I suggest you to disable all security software, including the Windows Firewall and then check if it solves the problem.

  Check out the link to disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

• Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.

  Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.

  Ref: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-code-0x800f0102/eefc1d5a-2f89-4676-82fb-1d76debbd13f

  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

• Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  80070490 = permission denied / [a problem initializing or using session variables] or item not found

  80070643 = ERROR_INSTALL_FAILURE

  http://support.Microsoft.com/kb/958044

• Update failed: KB2279264, KB2277947 and KB2251419

  Original title: Updates failed

  I have 3 updates failed repeatedly:

  -Updated to filter junk e-mail in Outlook 2007 (KB2279264)

  Update of security for Microsoft Office Word 2007 (KB2251419)

  Update of security for Microsoft Office System 2007 (KB2277947)

  Help!

  Hey melamat,

  ¯ This error message is reported for the three updates?

  ¯ Which operating system is installed on the computer?

  Please find the exact error message/code so that we can help you specifically on this issue. In the meantime, see if works manually install updates from Microsoft Download Center.

  Step 1: Find the error code

  To do this, follow these steps:

  (a) click on the Start Menu.

  (b) click on all programs.

  (c) when the window appears, click Update historyin the left upper corner of the window.

  This gives the full list of recently made updates and also the status of the installation as if the update installed successfully or not.

  (d) in the State of this window column, find the update failed to install, and then click the red X.

  A new window opens that displays the installation error code.

  (e) Note the error number and post it here.

  Step 2: Download and install the updates failed manually

  Here are the download links for the updates. Follow the Setup instructions for the updates. See if manual installation works.

  Update for the junk e-mail in Outlook 2007 (KB2279264) filter
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a064ccc6-a26c-4579-Baba-94467fd62bf0&displaylang=en

  Update of security for Microsoft Office System 2007 (KB2277947)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ed5b9671-651d-41F3-aed3-93ee8a28657f&displaylang=en

  Update of security for Microsoft Office Word 2007 (KB2251419)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0d7210a3-662e-41e7-AFFC-ae94f9d89388&displaylang=en

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• I'm trying to update Adobe encoder CC (2015). Whenever I try to update the application, I get this message: update failed. There was an error of installation of this update. Try again later or contact customer support (U44M1p34). I have no idea what to do

  Whenever I try to update the application, I get this message: update failed. There was an error of installation of this update. Try again later or contact customer support (U44M1p34). I don't know what to do to solve this problem and update of my application.

  Cannot install updates of Creative Cloud

• Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

  Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
  The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

  Hi Ben Dean,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

  To run the System File Checker, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  For more information, see the following Microsoft article:

  This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Vista sp1, all updates fail to install including sp2. error code 80070490

  I am running a Dell Inspiron 1521 with Vista sp1, all updates fail to install including sp2.

  I ran set and recommend solutions without success.

  Security updates fail with error 80070490, sp fails with the message installation fails.

  Recommendations of the solution please!

  Executed updated system preparation,

  Vista came installed on the laptop so I don't have a DVD that I can run repair with.

  Hi Norman,

  Unfortunately, you may not be able to repair Windows by using the features of normal repair since you do not have a disk. You may need to contact your hardware manufacturer to see what options they have to repair Windows.

• the sp35174 graphics driver update fails to install and SP37534.exe fails in response resignations:

  Graphic updates failed, two of the three listed.

  SP35174 fails States: error in NVCPL. Entry DLL missing NvCplRestorePersistence - gives same error separated 4 messages.

  SP37534 hangs and will not end after 2 hours of waiting, only the green progress indicator keeps the movement from left to right.  Manager tasks indicates that it does not.

  Pavilion m7750n

  Vista operating system

  NVIDIA GeForce 6150LE graphics
  Computer seems to work OK

  Someone at - it suggestions on how to correct these errors of installation of driver update?

  SP35174 and SP37534 are your graphics drivers and you just install one of them. SP37534 is the most recent of the two, but I would try to install the driver nVidia GeForce 301.42 directly from nVidia. This driver is the latest driver for your 6150LE. I would like to uninstall any nVidia graphics driver currently installed before 301.42 also consider installing the driver nVidia nForce 15,49 chipset, which will good update number other drivers on your computer.

• Windows update fails to download KB951847 with error code 80073715

  I have the 32-bit version of Windows Vista. Windows Update fails to update the following: Microsoft.NET framework 3.5 service pack 1 and the .NET framework 3.5 Family Update (KB951847) X 86 code error 80073715. This happens again and again. I am also unable to upgrade Internet Explorer because no Windows Vista SP2 installed. But I can't install SP2 until this SP1 error is resolved.

  Hello
  You can try the following methods

  Method 1:

  How to fix the .NET framework

  http://support.Microsoft.com/kb/923100

  Method 2:

  Run a scan of the System File Checker, click the link below:

  http://support.Microsoft.com/kb/929833

• Download windows update. using windows vista and code52D error

  could someone help me? Im having trouble trying to high rank, but it keeps telling me I have a code52D? I downloaded 8 9 improvements but the last of them. code52D help please.

  Hello

  Welcome to the Microsoft Vista answers Forum!

  As we need some clarification on this issue, could you please tell us.

  (a) which is the update fails on your computer?

  To know the update failure, you should check the history of update on your computer.

  Steps to follow.

  1. click on start.

  2. type Windows Update in the search field.

  In the upper left corner, you will find the update history.

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. click on the settings option to change on the left navigation bar. You will now be on a screen where you will be able to set up how to download and install the updates on your Windows 7 computer.

  3. Select the option check for updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install updates currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  If these suggestions do not help I recommend checking out the link below for parts reset Windows Update and try to install the updates.

  If you are not able to install updates in Normal mode, then you can start your computer in safemode, and then try to install the updates.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.