Vista sp1, all updates fail to install including sp2. error code 80070490

Similar Questions

• Vista Windows update fails to install and gives error code A 80071, 30

  Windows Update for vista not install and give the error code A 80071, 30. How do I receive the updates installed and what is this error? Stem

  Original title: windows update error code a 80071, 30

  Hello

  Method 1:

  I suggest you to disable all security software, including the Windows Firewall and then check if it solves the problem.

  Check out the link to disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• Update KB2446708 has repeatedly failed to install, citing 66A error code.

  Optional updates succeeded where this is important and some recommended to those who do not. Help and troubleshooting suggestions were followed, but in vain. Is there a way to delete all updates failed and regain some lost speed, not to mention allow updates installed?

  Hi Ed,

  First try the solution at this link: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992&displaylang=en&lc=1033.

  If this does not work, remove Microsoft .net Framework 4.0 using the .NET Framework Cleanup tool http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx.  And then reinstall the Microsoft .net Framework 4.0 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=0a391abd-25c1-4fc0-919f-b21f31ab88b7&displaylang=en and then install the update, you are having problems with.

  If this does not work, try resetting update (including a fixit) components: http://support.microsoft.com/kb/971058

  If this does not work, try a manual download by putting the KB numbers who fail looking here: http://www.microsoft.com/downloads/en/default.aspx and download them directly and see if it works.

  If this does not work, go to C:\Windows\SoftwareDistribution and remove content (but not the folder itself) and then restart.  See if that helps.

  Remove updates failed won't find you any lost speed - although if it could be done, it might be useful save you some space (assuming that all who uploaded was saved even if it has failed).  It also will not help install new updates.  It's a totally different question that hopefully will solve the above.  If a solution works for some but not for all of them, then try the other options to see if they can help as well in terms of everything attaches.

  If this does not help, please repost in the forum for the correct Windows version from: http://answers.microsoft.com/en-us/windows/forum/windows_update?page=1&tab=all&tm=1300700638376.

  I hope this helps.

  Good luck!

• Update for Windows Vista (kb975467) Security manages not to install and returns error Code 80092004

  The update of the topic was in Quebec City to install on my machine since October 16, 2009. Whenever I shut the machine down it tries to install, but fails to return code 80092004. I tried to download the KB975467 from Microsoft Update and received an error that the download is not compatible with my system. Can someone please help?

  Thank you

  Dustin

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows update fails to download KB951847 with error code 80073715

  I have the 32-bit version of Windows Vista. Windows Update fails to update the following: Microsoft.NET framework 3.5 service pack 1 and the .NET framework 3.5 Family Update (KB951847) X 86 code error 80073715. This happens again and again. I am also unable to upgrade Internet Explorer because no Windows Vista SP2 installed. But I can't install SP2 until this SP1 error is resolved.

  Hello
  You can try the following methods

  Method 1:

  How to fix the .NET framework

  http://support.Microsoft.com/kb/923100

  Method 2:

  Run a scan of the System File Checker, click the link below:

  http://support.Microsoft.com/kb/929833

• Tried to update the computer and got the error code 80070490

  I tried to download the update, and I get the error code 80070490.  I tried to download one that you people told me to download to see if it corrects the problem.  He did not, then I was told that I needed to reinstall Vista from disk, but I don't have the disc Vista came already in my computer.  Is there a link where I can download from you guys directly.  Help, please.

  Hello

  M ode 1.      

  You can try to install the updates to the clean boot, please visit the link mentioned to perform the clean boot below.

  http://support.Microsoft.com/kb/929135

  Method 2.

  See the city link below to download and install the system update readiness tool

  http://support.Microsoft.com/kb/947821

  Method.3

  Follow the link below city to run windows update

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  See also: http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

• My computer stopped the update since October 23, 2010, and whenever I try to check for popular update, I get the number of error code 80070490. Help, please!

  My update of the computer window stopped updating since October 23, 2010 and each time I tried check the update popular I get the error code 80070490. Help, please!

  Hello

  questions have already been addressed here in my 1st reply:

  Please read the answer given

  Here is the solution for your problem of MS

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Vista - Windows Update fails and defender gives the error code: 0 x 80080005

  Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.

  I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.

  Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• during installation of windows vista service pack 2, an error code comes and says that some updates to update were not installed with an error code (KB948465) _

  system information:
  Windows vista edition Home premium
  2007 micro.corp. service pack 1
  Manufacturer: Hewlett-Packard
  model: compaq presario CQ61 notebook pc
  ORP of 32 bits. sys
  Processor: cpu t3400 2.16 GHz

  And the error was...?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  =====================

  In no order given...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005:
  http://support.Microsoft.com/kb/971204

  0X8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  http://support.Microsoft.com/kb/947821

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
  http://support.Microsoft.com/kb/967818

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 2 important updates on several occasions failed to install. FFFFFFFE error code

  These 2 updates repeatedly failed to install:

  Update for Windows Vista for computers with x 64-systems (KB2679255)

  Update security for Windows Vista for x 64-based systems (KB2676562)

  May give it a try because it will not harm you in any way.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/install-of-kb2639308-fails-with-code-FFFFFFFE/3d6a895e-E510-49b7-b57b-a10a082be59e>

  UTC/GMT is 01:54 on Wednesday, May 16, 2012

• Updates will not install gives an error code of 0 x 643?

  My computer is configured for automatic updates, when I put to install installation fails. States, it could not install Microsoft net Framework 1.1 service pack 1, update security for windows 2000, windows xp, vista, windows, windows Server 2008, windows 7, windows 2008 Server R2 (KB953297) has recently upgraded ram.

  HOUSE V 2002 WIN XP SP 3

  Installation Installation failure: Windows could not install the following update with error 0 x 80070643: Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86.

  See respone for the 'Special one '.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982 TaurArian [MVP] 2005-2010 - Update Services

• I have 36 updates won't install, get the error Code 8000FFFF + Code 3715

  Code 8000FFFF + Code 3715 is in my Windows Update.  I have 36 updates which will not be installed.  Mr. FixIt did without touching!  I did research for months for a solution to the Code 8000FFFF, just to finally get 3 or 4 new files update.  They settled, but then the second error, Code 3715 appeared.  I have a Compaq PCSR5501P Tower, 3 GB of RAM and 4 GB ReadyBoost (at recommended setting) with Windows 32 bit Vista Home Basic SP2 and ESET Smart Security 5.  Also, I have a Seagate 2 TB external drive.  It was not connected during this period for months, then Windows Defender found a registry error about this.  I removed it to the Defender.  I consider myself to be a bit smarter than the average bear, but it beats me.  I know it's 9 out of 10 times it simple!

  OK, the technophiles who takes up the challenge of can make a grinder monkey out of me?

  Thanks a lot for the people who understand and care to share.

  Q

  Hello

  1 did you do changes on the computer before the show?

  Method 1: I suggest you try the steps mentioned below and check if it helps.

  Windows Update Error 8000FFFF:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8000ffff

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Method 2: If the problem is not resolved I suggest you try the procedure described in the link mentioned below.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  And take note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Check if you can install the update from Windows.

  Hope this information is useful.

• Some updates were not installed, get the error code 646

  Some updates for windows vista, you receive the error code 646 were not installed and I tried to update manually by using registry files and still isn't updated do not know what is the problem, but when trying to install update, say, it's something on a restore point for the update

  Hi Lori,

  -What are the updates that fail to install?

  I suggest you try the steps in the following Microsoft Article.

  You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

  See: http://windows.microsoft.com/en-XM/windows-vista/Windows-Update-error-for-80070646-or-646

• Problems downlaoding iTunes Version 9 - updates do not install it on error code 643 laptop. Details of the problem below

  I had itunes installed on my laptop but have recently purchased an ipod touch which requires version 9 - but when I tried to install the new version I get the following message

  "An error occurred during the installation of assembly"Microsoft.VC80.CRT, publicKeyToken is"1fc8b3b9a1e18e3b."
  Type = "win32", version = "8.0.50727.762" processorArchitecture = "x 86".
  See Help and Support for more information. HRESULT: 0x8oo7054F

  I posted this on apple support and a very helpful gentleman has led me to my updates that fail with the error code 643...

  He was advised to do a scan Avast which I did and discovered the following

  CoreSrv.dll
  HostIE.dll
  HostOE.dll
  SeekmoSA.exe
  SeekmoSAAX.dll
  SeekmoSAHook.dll
  SRV.exe
  ToolBar.dll

  These files are on my drive C under Program Files and changed on 26/11/2007. The virus is the same on each of them:

  Win32:adware - gen [adw]
  
  I intalled a program of removal of malicious software that has removed these files, rebooted and tried to download itunes again, but got the same message.

  I tried to re - install the updates failed this morning and this is the error I got

  {7 B 298060-1128 - B7E8 - A06B - D6B9AF34537}. HRESULT: 0X8007054F I tried to download the following: Security for microsoft XML Core Services 4.0 SP2 KB936181 update I'm running out of ideas and would really help - I'm travelling in a few weeks so buy the ipod touch and I want to just put the music until I leave. Can anyone help?

  Hi tashadeuk

  Thank you for using the Microsoft Answers Forums!

  We try several steps here to help you.

  Step 1:

  Download the update program "msxml4-KB936181 - enu.exe" on the Microsoft website, no Windows Update.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=021E12F5-CB46-43DF-A2B8-185639BA2807&displaylang=en

  Run the program and delete all.

  Restart, and then rerun the program again to install it.

  Then, run the file of Windows Update for "Update for Microsoft XML Core Services 4.0 Service Pack 2 security".

  Restart the computer.

  Step 2:

  Run the following Anti Virus program.

  www.OneCare.live.com

  Also, run your malware removal tool.

  Step 3:

  You can reset Windows Update refer to this link for the procedure.

  http://support.Microsoft.com/kb/971058

  Alternatively, you can refer to this thread to get help:

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/b0110b1d-5a0e-4bdd-873c-6949aad87f8d

  Hope this information was useful.

  After back and let us know if that fixes your issue.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.