Update file is invalid for this architecture?

Earlier this year, I bought a ReadyNAS NV + (silver body, 4 bays with 2 TB, plan 5.0).
It is currently running RAIDiator version 4.1.9 build 1.00a043 (Orange and blue FrontView web interface).

Today, I bought the following.

Python2.7_2.7.3 - rnsparc - 0.5.1
SABnzbd_0.6.15 - rnsparc - 0.7.0
SickBeard_0.485.1 - rnsparc - 0.8.1

Went to system/update / local. Click on "Choose file". Module ' Python2.7_2.7.3 - rnsparc - 0.5.1 "selected (bin file). Clicked on "download and check the image. Click on 'OK '. Received this error message, "update file is invalid for this architecture".

What is going on, the processor has been changed? Have I misunderstood the installation process?

Below are some information that might be relevant.

-J' did what I can to check the processor, but it seems to be nothing in FrontView or RAIDar that verifies this.
-I don't have SSH installed because I read somewhere that it invalidates the warranty.
-J' got this error even some time back, when I tried to manually update RAIDiator.
-J' just tried a few other modules SPARC and I still get this message.
-I have no third party add-ons installed.
-J' have the 'ReadyDLNA"streaming service and"TimeMachine support"lit.
-I have not tried one of the other architecture because I don't want to lose more money and I don't know that it is SPARC.

Thanks in advance for any help.

A tech at ReadyNASXtras (MDGM) solved this problem for me. It turns out that at somepoint, I tried to install PLEX that is not available for SPARC. He failed but was not removed. There was no evidence (apart from this error) FrontView of the residue. Installation failed has confused the script of update/s. The clean tech upward and everything works fine now.

Problem solved. Thanks MDGM.

P.S. I just learned by MDGM that a reinstallation of the RAIDiator firmware would have also fixed this.

Cheers. EkDor

Tags: Netgear

Similar Questions

  • its update is not available for this Apple ID, article has been bought by another user or because it has been refunded or cancelled

    Hello

    I'm updating iPhoto, but I have this message:

    "This update is not available for this Apple ID, article has been bought by another user or because it has been refunded or cancelled.

    Could you help me?

    Thank you

    Stéphane

    Apple is no longer develops and supports iPhoto.

    If you have previously bought iPhoto, it should be in your list of purchases made on the App Store. If you do not see, it may be under hidden purchases. You can try to download it from there.

    Also, try this link:

    iPhoto 9.4.2

  • iPhoto has stopped working. When I try to download the latest version, I massage "this update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."... why?

    iPhoto has stopped working. When I try to download the latest version, I massage "this update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."... why?

    Mac OS X 10.10.3 and newer include Photos, which is designed as a replacement for iPhoto. If you want to go on the use of iPhoto in addition to or instead of switch to Photos, click here and try following the instructions; you will only be able to do if you got before where associated with iPhoto on the Mac App store.


    (138042)

  • I just spent over 1.5 hrs with servThis client update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled. Thank you very much

    "This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."

    I can't update Flash or Iphone etc. I bought the Mac in a well-known Apple authorized store in Toronto, Ontario thank = you much, I tried to contact Adobe customer service after more than 1.5 hours was not able to help, so I'm here. Hello everyone. My first entry!

    Looks like you're not able to connect using Apple ID. If so, please work with the Apple support team.

    You can download the latest version of the flash player from Adobe Flash Player install for all versions

    Thank you.

  • After installing the updates, event viewer says "Some of the updates are not applicable for this system"

    I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

    Hi Simply4real,

    Check out the link below to a thread with similar problem and check if it helps.

    http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update files - Scan site for links to renamed files?

    Is there anyway to turn off this feature?

    Whenever you move rename.or files, dreamweaver wants to analyze your site and help you make the changes.

    http://nickdclements.com/hotlink/update.jpg

    That is fine, but more often it is not necessary to do so.

    And more often that otherwise, I hit the [help] loading adobe site which makes it especially to a nuisance.

    Solution:

    Go to Edit, select Preferences and as a general rule , there is an option "update links when moving files" then choose "Never". (available in all versions?)

    I disabled all the options of the site cache for all my sites as well as to avoid the "_notes" folder in one of my sites.

    I use a website based filesystem FILOFOL (PHP) system so I don't need Dreamweaver to offer this service for me...

    Sincerely,

    R. Vanderkuil and good luck!

  • My slimline s5212y cpu fan seems to work fast constantly.is it an update of the bios for this?

    Hello

    I replaced the motherboard on a tower of s5212y slimline (the same Board of model). Everything works fine, but the cpu fan seems to work too quickly, constantly. Y at - it an update of the bios that fixes this?

    ICU wrote: Hi, I have replaced the motherboard on a tower of s5212y slimline (the same Board of model). Everything works fine, but the cpu fan seems to work too quickly, constantly. Y at - it an update of the bios that fixes this?

    Hello uti, I checked for an update of the BIOS of your system but could not locate a.

    You can try to reset the BIOS, either by removing the CMOS battery, or perform the jumper pin method.

    If you remove the CMOS battery, boot the system and enter the BIOS and reset the time, day, and year, save these settings and reboot the system.

  • File too big for this file system

    Hello... again :=)

    I have another problem with esxi, whenever I try to add a 500 GB hd to a linux VM (not tried a wihdows one) it is said that "the file is too large for the file system.

    What can I do to fix this?

    LOLz... It is very well... If you use VC... then you can use storage VMotion... that has to be done through command line if... otherwise you can shut down the VM, migrate the VM and the point o of the destination data store... so in this way, you can empty the data store...

    Concerning

    Anil

    Save the planet, go for green

    If you have found my reply to be useful, feel free to mark it as useful or Correct.

  • Update XCode is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled.

    When I try to update Xcode the following error message will be display... Looking for the solution...

    Hello

    "This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled"

    Applications installed on your Mac are updates available or accepted from the Mac App store, but you have purchased using an Apple who is not currently signed in ID. Log in with the Apple that you used initially to buy apps ID. If you don't know what Apple ID was used, check to see if someone else who uses your Mac has accepted these applications.

    Information above is taken from this Apple support article > Accept bundled apps using the Mac App Store - Apple supported

  • PES 10 not supported on this Architecture

    Just installed 10 PSE on my Mac.  When I try to run it, I get the following error message:

    "Cannot open the application 'Photoshop Elements 10' because it is not supported on this architecture."

    I'm on a vintage mid 2009 Macbook Pro with the following specifications:

    OS X 10.5.8

    Intel Core 2 Duo

    2.8 clocked GHz

    4 GB memory

    Would appreciate any help.

    Thank you.

    Thank you, Barbara.

    Here's an update and the solution for this problem:

    I chatted with Adobe support. They suggested that I have create a new administrator account and try to run PES 10 from the new administrator account. The application started successfully. However, I didn't want to go through the hassle to migrate my existing to the new Admin account, so I asked if there was another solution.

    They had me go back to my original Admin account and watch my preference of the library in [user] \Library\Preferences files. Turns out I had a few remaining files of the PSE 6. They had me delete the file called "Adobe Photoshop elements 6 paths" and the file called "Adobe Photoshop elements 6 settings". Then I uninstalled 10 PSE and reinstalled, and now everything works fine.

    Thanks again.

  • What is "you want to update the password saved for"

    Given that I deleted prefs.js and user.js when I connect to any account in the upper-left appears
    "you want to update the password saved for" this interferes with the connection and now it won't let me connect you to your e-mail account.
    I wonder where it appears? I don't want to use it and want better to delete, but don't know how?
    I wanted to add a page in this issue, but as usual Firefox won't like that I guess. So, after this announcement I'll add.

    Thank you.

    Hello

    Thanks for the very useful reply.
    I followed the direction and it seems to work.

  • Where can I find an update of the BIOS for Satellite A100-200 (PSAA8E)

    Hello

    Where can I find an update of the BIOS for this model?
    The BIOS on the download page is from November last year, is there something more recent, or does anyone know of an update that is compatible?

    Thank you

    Ian

    The drivers and BIOS published on the page of Toshiba Europe are always the latest versions available.

    Toshiba page does not provide a different version then the one available is the newest ;)

  • Where can I find an update of the BIOS for Satellite A200 - 14 d (PSAEC)

    Hello

    Where can I find an update of the BIOS for this model?
    My bios is 10/23/07 Windows Vista 32bits 1.80 - WIN

    Hello

    Have you checked the page European driver of Toshiba?
    Here you can find all the drivers and BIOS for Satellite A200 - 14 d (PSAEC)

    But I checked the page and 1.8 for Win 32-bit Vista BIOS is still the newest one.

    Looks like you're already up-to-date boyfriend ;)

  • Update are not available with this Apple ID.

    I bought my MacBook Pro 8 months ago.  Today, I get an error that I can not update my iPhoto in the App Store.  It says "update not available with this Apple ID.  This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled. "I read a lot of FAQ online, but none of them say that they had this error with iPhoto, which is an application that I have not purchased (so I can uninstall it and reinstall it as suggested).  Y at - it an easy fix?  I tried to reach out to the Geek Squad, but which is not helping either.   Thank you.

    If you are not the original owner of the MBP you must erase the SSD drive and reinstall the os x which then attaches your ID for the MBP.

    You can do this by starting the MBP in the restoration of the Internet by using the OPTION, COMMAND + R keys.  The result will be a presentation with a rotating globe:

    This will connect you to the Apple servers.  Following the directions, you get this menu:

    First use disk utility to erase the SSD drive.

    Then click "Reinstall Mac OS x"

    A strong Internet connection is rrequired.

    Ciao.

  • The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

    The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

    Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

Maybe you are looking for