Update for Windows Vista (KB2653956) 80070020 security

Similar Questions

• Update for Windows Vista (KB977165) _ security

  This security update is offered after it has been installed permanently...

  I have Comcast as an ISP and use Norton which is offered by comcast for protection.
  I used MacAffee that gave comcast and never had this problem.
  I ran Fixit application and my laptop is compatiable with this update.

  I checked history updated and it shows the update successfully, but when I check the installed updates there no updated figure...

  Any ideas?

  System information:
  Windows Vista Edition Home Premium SP2
  Dell XPS M1330
  CPU: Intel Centrino Duo
  32 bit OS
  For more information and you will have to tell me where to find it. I'm not exactly the biggest with computers

  answered in another thread

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/c2631098-6773-4657-9b64-6765dea01ac4/
  Rob - bicycle - Mark Twain said it is good.

• Download size of forInternet Explorer 9 for Windows Vista (KB2675157) cumulative security update: 10.9 MB update type: Important

  I recently met problems to install the window updates three published on 10/04/12. These are: a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2675157) download size: 10.9 MB type of update: Important Security Update for Windows Vista (KB2653956) download size: 211 KB update type: Important; Update for Windows Vista (KB2679255) download size: 2.0 MB update type: recommended; A security update cumulative for Internet Explorer 9 for Windows Vista (KB2675157) download size: 10.9 MB update type: Important.

  I tried all the resets and made several attempts to install. Nothing works and I had to put my computer on controlled facilities because these installs interferences with the start to the top of my computer after power off.  The installation process caused delays important in the start menu upward to end up a failure to install notification.

  I've never had a problem to install other updates to Windows on my system.

  Any help would be appreciated.

  Hello

  1. What is the exact error message you are getting?

  2. what troubleshooting steps have you performed?

  3. don't you make changes to the computer before the show?

  Please follow the steps below.

   

  Method 1:

  Step 1:

  Put the computer to boot.

  Click on the link below

  http://support.Microsoft.com/kb/929135

  NOTE: after you have successfully installed updates, restore the computer to start as usual (see step 7 link mentioned above)

  Step 2: Manually, try to install updates from Microsoft Download Center.

  a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Microsoft Download Center

  http://www.Microsoft.com/en-us/download/default.aspx

  Method 2:

  Run the Microsoft fixit from the link below.

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/2509997

• Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020

  Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020.

  KB2633952 is an option, not the security update. Feel free to hide it - especially if you do not live in Kaliningrad, Minsk (Belarus), Bahia (Brazil) or Fiji.

• 80070020: updates for Windows vista for x 64-based system

  When installing KB973917 updates for Windows vista x 64 based system I get the error code 80070020

  0 x 80070020

  STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process

  You receive a "0 x 80070020 the process cannot access the file because it is being used by another process" error message when you try to download an update from Windows Update or Microsoft Update

  http://support.microsoft.com/default.aspx?scid=kb; EN-US; 883825>

  see if that helps.

• Update for Windows Vista (KB969947) security does not maintain install

  Update for Windows Vista (KB969947) security does not maintain install
  I have tried several times over the past two months installing this update, nothing seems to help scaned pc thinking it as spyware or some other malicious code nothing it just fails and I can't clear it out! any help at all would be great!
  Thanks in advance

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  The foregoing despite...

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for Windows XP (KB2653956) security fails to apply the error Code 0 x 80070005

  Update for Windows XP (KB2653956) security fails to apply with error Code 0x80070005. I tried unsuccessfully to automatic and manual applications. I am looking for a solution to this problem.  "Cumulative Security Update for Internet Explorer 8 for Windows XP (KB2675157)" do not either as well.

  Running Windows XP service Pack 3 completely updated except the above mentioned fixes.

  Thank you

  One of the most common causes of this error code is the Anti Virus and Anti Spyware software running on the computer.

  You can try to disable them, and then try the updates again. Keep the firewall however.

  Recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP Antivirus
  http://support.Microsoft.com/kb/822158

  How to reset security settings to default values
  http://support.Microsoft.com/kb/313222

  Solve installation errors using the SubInACL tool to repair the file and registry permissions
  http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx

• Update for Windows Vista security for systems x 64 (KB2705219) does not maintain install

  This update security update for Windows Vista for systems x 64 (KB2705219) does not maintain install. He also continues to try to move automatically.

  Other updates are installed without problems if Im not sure what I can do about it.

  Help!

  

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-GB/Windows/Windows-Update-error-80070490#1TC=Windows-Vista

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• my wireless does not work when I download the update for Windows Vista (KB2753842) security

  After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally

  the fact. When I used a LAN cable I internet connection.
  When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.
  The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.
  Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?
  Thank you.
  Roy

  Thank you very much for your answer.

  I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.

  Kind regards

  Roy.

  Hi royhorrobin,

  Please report the problem to the Microsoft Community Forum.

  We will help you solve the problem.

   

  1. What is the brand and model of the computer?

  2. do you get an error message?

   

   

  We would like to tell you that this is a critical update...

  Find information here:

  http://support.Microsoft.com/kb/2753842

  Here are some steps that you can follow:

   

  Method 1:

  Step 1: Restore the system to the United Nations-isntall the software update.

  Refer

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   

  Step 2: Put the computer to boot, with warning...

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

   

  Step 3: Download and install the update manually to the clean boot.

  Method 2:

  Try to update the Wireless driver and check to see if the same problem happens.

  a. click on start
  b. right click on computer
  c. click Properties
  d. click on Device Manager on the left hand side

  e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
  f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   

  
  Method 3:
  Also, try the steps from the link below:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
   
  Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• Update for Windows Vista (KB2676562) Security - Code 8007065E error

  Update for Windows Vista (KB2676562) security failed 34 times since 05/16/12.

  How to solve this problem?

  Hello

  Follow these methods.

  Method 1: Follow the steps in the article.

  The problems with the installation of Vista updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: You can temporarily disable your antivirus and then try to install the update.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow these steps.

  Step 1: If the methods above do not help, we can put the computer in a clean boot state, and then install the update manually.

  To help solve the problems, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Step 2:
  Now, to install the update manually.

  If you use a 32-bit computer, download and install this update.

  Update security for Windows Vista (KB2676562)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29829

  If you use a 64-bit computer, download and install this update.
  Update security for Windows Vista for x 64-based systems (KB2676562)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29768

  Please take note : After completing the clean boot troubleshooting, make sure that you start the computer in normal mode.

• A security update for Windows Vista for failure of the 32 x-based systems (KB2585542) installation code 8024200d

  I tried to do the automatic update of the KB2585542 on my PC which runs on Vista 32 bit.  Whenever I try to install it, I get one above mentioned the error code.  I ran an anti-virus, anti-malware & a reg clean and then tried to install it but I still get this error.

  Hello

  You are able to install all other updates of Windows without any problems?

  Follow these methods.

  Method 1: If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.  After you run the analysis tool, try to install the update.

  You can download & run the system update readiness tool and check.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Method 2:  If this does not help, you can temporarily disable antivirus software, and then try to install the update.
  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  

  Method 3:  If the methods above do not help, you can place the computer in a clean boot state, and then try to install the update.  Follow these steps.

  Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, place the computer back to normal following KB article.

  Step 2: Now, try to install the update manually.
  You can go to http://www.microsoft.com/download and use the number of the update to download and install it.

  Reference: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Why I repeatedly get a security update for Windows Vista for systems (KB2676562) and update for Windows Vista (KB2679255) focused on the x 64 even after that both have been installed successfully?

  update of security (KB2676562) has already been correctly installed 21 times, began towards the end of May.  Update for Windows Vista (KB2679255) was successfully installed 35 times, he began in mid-April.  These two continue to update themselves every day and do it at least twice a day, back to back.  It is very frustrating to have to deal with that and makes me think that something may be a problem with my computer.  I had heard of registry cleaners is not not a good thing to use, if recently I not unhooked my registry free cleaner.  I hope that it has not caused my computer to lose any registry key values.  Does anyone know a possible solution or what I need to do? I thank everybody help, please!

  Hollow salvation of the farm,

  Try these steps

  Method 4: Reset the contents of the Catroot2 folder

  go to start > all programs > Accessories > right click on command prompt > run as administrator

  Reset the contents of the Catroot2 folder. To do this, follow these steps:

  Type the following commands and press ENTER after each command:

  net stop cryptsvc

  MD %systemroot%\system32\catroot2.old

  xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2

  output

  Restart the PC and then

  Method 8: Rename the folder C:\Windows\SoftwareDistribution

  Rename the Windows Update temporary C:\Windows\SoftwareDistribution folder. To do this, follow these steps:

  Open an administrative command prompt window.

  Run the following commands and press ENTER after each command:

  Net stop wuauserv

  CD %SystemRoot%\System32

  Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  Net start wuauserv

  Try to install updates again.

  also try to scan your computer

  Method 1: Use the Microsoft Safety Scanner to scan your computer for viruses and malware

  
  To analyze your computer by using the Microsoft Safety Scanner, click on the following link:

  http://www.Microsoft.com/security/scanner/ use the software to combat spyware and antivirus software to scan the computer.

  To see a list of third-party anti-virus software vendors, visit vhttp://www.microsoft.com/windows/antivirus-partners/windows-7.aspx.

  To download and install Microsoft Security Essentials antivirus software, visit http://www.microsoft.com/en-us/security_essentials/default.aspxc.

  Please come back if you need assistance

  Thank you

  Makoi

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.