Update FP work not at all, from ver.21

Similar Questions

• The use of the dedicated graphics card? Power management works not at all, no difference

  I bought a lenovo g500 and after installing every single player on this site, I decided to test some games from my pc to the laptop.

  Unfortunately, I see the games from the pc do worse than what they do on the pc (and the pc is old) so I think that the amd graphics card are not at all. Can someone explain how to enable the amd radeon video card? BIOS does not help and the CCC (catalyst control center doesn't help either).

  For example:

  I could run borderlands 2 in a little weak graphics on the pc perfectly.

  However on my laptop I can not even reach the main menu because of the very low fps.

  Another example is crysis 2, works perfectly on the graphic means on the pc, runs on 2-4 fps on the laptop.

  Features of the laptop:

  Video card

  Intel HD 4000 (one built-in) + ddr3 2 GB AMD Radeon HD 8570 (128-bit)

  Memory

  4 GB of ddr3 memory

  Processor

  Processor Intel Core i7-3612 QM @2.10 ghz

  Specifications of the PC:

  Video card

  NVIDIA GTX 650 1 GB ddr3 (128-bit)

  Processor

  AMD Dual Core 6000 + @ 3.2 ghz

  Memory

  4 GB of ddr3 memory

  Applications in full-screen mode using lags like hell, my mouse moves in slowmotion too much (real slowmotion)

  Edit: windows is 64-bit windows 7.

  The solution was to install windows 8 (bought a copy of the professional edition x 64), and then install the drivers from the site. Now everything works as expected. Must have had a problem with the windows 7 x 64 and x 86 drivers... Well, now it works.

  @shauni: tried with borderlands 2, could get 11-13 fps MAX during the game with graphics maxed out regardless of the diet plan, but as soon as I switched to windows 8, the amd video card started working and I now have 40-50 fps (which for me is UBER OPTIMAL). I always get 11-13 fps if I unplug my laptop well.

  SOLUTION OF THE SHORT VERSION:
  Install windows 8 (x 64 in my case)

  NOTE: the drivers on the site are buggy for windows 7 x 64 / x 86. Date today: 8 October 2013.

• Update to win 8 identifies the updates but does not download anything from 0 KB

  ASUS va550ca out of the box

  Lists updates and does not download anything 0 kb

  Back of bar activity scroll on the screen

  Hi Mark,

  What is the exact error message you received?

  Try these and check.

  Run the System File Checker tool, install the update to Windows and check.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the problem persists, run the DISM tool and check.

  http://TechNet.Microsoft.com/en-us/library/hh824869.aspx

• Windows Update not working not at all, error 0 x 80246008

  XP SP3 will not update get error code 0 x for all attempts to updatess 80246008.  How can I get the update working again? I currently have 47 pending updaates which will be no tload.

  0 x 80246008
  WU_E_DM_FAILTOCONNECTTOBITS

  A download manager operation failed because the download manager could not connect (BITS) Background Intelligent Transfer Service.

  Did you try this?

  You can restart your computer, then use the steps below and check, if it solves problems-

  You receive an error message "the necessary services are disabled or unavailable" when you connect to the Microsoft Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/883822>

  `~`

  Reset

  You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start 0 Background Intelligent Transfer Service x 80246008

  http://support.Microsoft.com/kb/916251>

  `~`

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/?kbid=910337>

  `~`

  Restart one last time then test by launching a manual check of updates & see if the
  updates to install now.

  `~`

  The time and date of this moment in British Colombia, Canada is 07:55
  Sunday, March 30, 2014
  The time Pacific daylight time (PDT)-0700 UTC

  UTC/GMT is 14:55 on Sunday, March 30, 2014

  Current weather conditions in Vancouver

  Mainly cloudy 43 ° F / 6 ° C

• Research of Stock from Adobe works not in all office since upgrading to the latest applications

  I get the error message ' sorry. something went wrong when searching actions from adobe. Please try again "."

  I run the latest applications of office which launched June 2016. At work long before new applications.

  I have run windows 10 on a hp G2 z book. I tried to disconnect and creative cloud back in. I rebooted my machine. Did not help.

  I can get the stock very good site and I can download comps in my libraries without any problem. It; s just that I can't find in in applications.

  Any ideas?

  Thank you

  Hi Bob,

  Have you tried to log out of the desktop application Adobe CC and then reconnect?

  That would synchronize the libraries.

  Hope that helps!

  Kind regards

  Sheena

• What is happening with the new version of Illustrator? Just improved the last update and since the scale of the effects on the basic forms of work not at all! so frustrated!

  I can't same scale forms a base logo without the widths of form changing all different. Yes, I restarted the program and restarted my computer.

  What is going on? something that should take me 2 seconds I've spent an hour trying to solve the problem.

  Help, please!

  KMoore,

  You also select the objects and uncheck snap to grid of pixels?

  This is what works for existing objects. What did you prevent only new objects aligned.

• Windows 7 X 64 and now firefox update only works in SafeMode (all off also addons)

  I just updated Firefox with Windows 7 X 64 update kb2670838 number and now I just make me sent to Mozilla error report screen if I'm not in safe mode. I've disabled all my addons and themes. The only way it works (and I might post it) was to use safe mode. I don't not know the difference between safe mode and normal mode. I've updated this after noticing somethings were activated and my theme is enabled but I have disabled since their. I also use the 7 15 java update that seems to work.

  Could be this bug:

  • bug 812683 - crash to boot from Win7 to _d2d_clear_surface @ CContext::RestorePipelineStateImpl (d3d11.dll, after the installation of KB2670838)

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• Desktop Search/WDS works not at all - do not index - impossible to find securities even files I know are present

  Hello

  I installed Windows Search 4.0 installed on my machine yesterday. I added my file & Outlook to search settings, but it doesn't seem to be indexing at all. If I manually start indexing it immediately says "Index complete.", but it does not change the result of the search.

  Finally, I would also add 2 network drives to my data indexed for search, but I think this requires an add-on. Once I get Desktop Search works perfectly, I want to do this. Any suggestions are welcome.

  Critical information:

  • Windows XP Professional SP3
  • Windows Desktop Search - Index doesn't not given to all THE
  • I tried manual indexing starting - does not alter

  Thank you

  Brian

  Hi BrianL2,

  Run the patch from the link below: Windows search does not work and research is slow or stops:http://support.microsoft.com/mats/windows_search/en-us

  You can also check out the link below: Windows Search 4.0 Troubleshooting Guide:http://technet.microsoft.com/en-us/library/cc771814 (WS.10) .aspx

  If the steps above do not help, you can uninstall windows search 4.0 and reinstall it back. Follow the method below:

  Step 1:

  a. click on start

  b. click Control Panel

  c. Select Add/Remove programs

  d. click on see the updates

  e. Windows Desktop Search 4.0 appears here

  f. click on remove

  Install it from the link below:http://www.microsoft.com/windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx?tab=Install%20It

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Middle button of the mouse - dosen't work not at all.

  So my action more used in Firefox was using the middle mouse button to open a new tab on a link. Suddenly after a format on my PC, the middle button of the mouse now refuses to be recognized by Firefox; He cannot even hold to auto-scroll or anything. I would like to confirm that the button works on other programs and games without any problem. Using using ctrl/shift + click is not perfect, but what I do until now. I use the latest version, here is a list of the things I've tried:

  -Check all the related: config with the "middle" in the search field.

  -Make a new profile and reset Firefox many times

  -Disabled people / removing addons/extensions

  -Wiping and installed Firefox completely - tried with no addons

  -Options checked

  Up here no luck at all, even no tried a few other browsers such as aurora & chrome with the same question basically.

  I don't know if you have a whimsical mouse with his own custom driver software. If so, it would be interesting to try to update the drivers. Alternatively, Firefox sometimes works best when switch you to the standard Microsoft mouse driver instead.

• My HP MediaSmart programs work not at all

  Even the touchbutton mentioned does not work; my webcam is not no longer works. When I click on it, looking in my programs, they don't appear. Just the hourglass icon, but it subsides quickly. Nothing happens then. Does anyone know what is the problem? If it helps, I have Windows 7.

  Was this an upgrade from Vista to Windows 7? Also, what model of laptop is it? We owe this, then we can help you.

  I can have you do now is go to "programs and features" in the control panel and see if the Media Smart software is there. for example "HP MediaSmart Webcam' size should be about 80 MB and 'HP MediaSmart SmartMenu' size about 2 MB.

  If they are there and they are this size, they be corrupted me. In this case, you will need to uninstall them and use the HP web site to reinstall. You can also use the software together pointing upwards on the 'C' drive, but they can be updated.

• HP PhotoSmart D110 - Wireless work not at all

  I can't believe it! I bought a PhotoSmart D110 and it worked fine for 3 months. Now, I'm very frustraded. Whenever I need to print something from any of my computers at home wireless, I need to put the printer off, wait a few minutes and turn again. Then I print 4 pages and I need to do it again. So annoying!

  I've tried everything! Reinstalled the drivers on my MacBook. Reset the factory settings on the printer control panel. Update the firmware of the printer. Update my firmware wireless (which is a Linksys EA-2700).

  I don't know what else I can do about it.

  I did research on many Foruns on the internet for some tips and there are tons of people complaing to the same problem, not only on this model, but also a whole bunch of other HP printers.

  And yuou know what... There is no response from your HP.

  Common CV, you used be better! What is going on? Not sure how to solve the problem of your customer! You sell a "disposable" printer that only works for 3 months?

  What should I do? Buy another printer? If this is your solution, do not expect that I will be your customer again!

  Rembember that 'no response' is the worst response you can give to your customers!

  And don't be afraid of social media... Open your Facebook Page for people to post their opinion. Or at least send a response when someboday tweet @HP... I'm still waiting!

  Looking forward to hearing from you SOON with a solution!

  Hey, thanks for your response.

  I tried to do, but it did not work, however I found another way and until now my wireless works. Finnaly.

  Here's what I did on my Mac.

  (1) on my system preference, I clicked on the icon 'Print & Scan'. I remove my printer by clicking the (-) signal. Just for the record, I didn't uninstall the HP printing software, but clearly myself as I got the latest version (as you mentioned in your response);

  (3) I printed my HP printer (directly) config page on the Panel. To find the IP address of my printer.

  (2) I click on the (+) sign of the signal, and then I clicked on the option "add a printer or a scanner. On the prompt box, I chose the "Intellectual property" tab (with a globe);

  (3) on the address field, I inserted my IP address of the printer (the same that I found on the page that I printed on my printer).

  (4) HERE IS THE MAGIC: on the Protocol drop-down list there are 3 options: "IPP", "LPD" and "HP Jetdirect - taken.

  YOU MUST CHOOSE "HP Jetdirect - Socket" - it's Important for a configuration of the House, okay?

  (5) waiting-I left empty

  (6) name = name of my printer 'HP Photosmart D110' but you can add what you want

  (7) location = you can leave it blank. I added "Home".

  (8) use = assigned automatically

  (9) i clicked on 'ADD '.

  (10) may be another box will ask you to select a driver to associate with your printer. In my case, I choose "HP Photosmart D110 series.

  FACT!

  Now, it's work and I hope it lasts forever!

  I hope this helps others with the same annoying problem.

  And HP, please make our lives easier! Create a better explanation or software that make it happen automatically.

  

• After the last update, Thunderbird can not recover messages from RCN POP3?

  On a WINDOWS 7 PC (Dell Inspiron 15) Thunderbird has been automatically updated on 12 June.
  After the update it is unable to get my email from my service provider (RCN).
  It seems to connect with pop.rcn.com but then it crashes, and no email is delivered.

  Your troubleshooting information:

   Application Basics
  

     Name: Thunderbird
     Version: 24.6.0
     User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0
     Profile Folder: Show Folder
  

               (Local drive)
     Application Build ID: 20140610001341
     Enabled Plugins: about:plugins
     Build Configuration: about:buildconfig
     Crash Reports: about:crashes
     Memory Use: about:memory
  

   Mail and News Accounts
     account1:
       INCOMING: account1, , (pop3) pop.rcn.com:110, plain, passwordCleartext
       OUTGOING: smtp.rcn.com:587, plain, passwordCleartext, true
       OUTGOING: smtp.rcn.com:587, plain, passwordCleartext, false
  

     account2:
       INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
  

   Extensions
  

   Important Modified Preferences
  

     Name: Value
  

       accessibility.typeaheadfind.flashBar: 0
       browser.cache.disk.capacity: 358400
       browser.cache.disk.smart_size.first_run: false
       browser.cache.disk.smart_size.use_old_max: false
       browser.cache.disk.smart_size_cached_value: 358400
       extensions.lastAppVersion: 24.6.0
       font.internaluseonly.changed: false
       font.name.monospace.el: Consolas
       font.name.monospace.tr: Consolas
       font.name.monospace.x-baltic: Consolas
       font.name.monospace.x-central-euro: Consolas
       font.name.monospace.x-cyrillic: Consolas
       font.name.monospace.x-unicode: Consolas
       font.name.monospace.x-western: Consolas
       font.name.sans-serif.el: Calibri
       font.name.sans-serif.tr: Calibri
       font.name.sans-serif.x-baltic: Calibri
       font.name.sans-serif.x-central-euro: Calibri
       font.name.sans-serif.x-cyrillic: Calibri
       font.name.sans-serif.x-unicode: Calibri
       font.name.sans-serif.x-western: Calibri
       font.name.serif.el: Cambria
       font.name.serif.tr: Cambria
       font.name.serif.x-baltic: Cambria
       font.name.serif.x-central-euro: Cambria
       font.name.serif.x-cyrillic: Cambria
       font.name.serif.x-unicode: Cambria
       font.name.serif.x-western: Cambria
       font.size.fixed.el: 14
       font.size.fixed.tr: 14
       font.size.fixed.x-baltic: 14
       font.size.fixed.x-central-euro: 14
       font.size.fixed.x-cyrillic: 14
       font.size.fixed.x-unicode: 14
       font.size.fixed.x-western: 14
       font.size.variable.el: 17
       font.size.variable.tr: 17
       font.size.variable.x-baltic: 17
       font.size.variable.x-central-euro: 17
       font.size.variable.x-cyrillic: 17
       font.size.variable.x-unicode: 17
       font.size.variable.x-western: 17
       mail.openMessageBehavior.version: 1
       mail.winsearch.firstRunDone: true
       mailnews.database.global.datastore.id: d543b3cb-33b5-4a9c-b3c2-663f71c6c97
       network.cookie.prefsMigrated: true
       places.database.lastMaintenance: 1402326252
       places.history.expiration.transient_current_max_pages: 104858
       plugin.importedState: true
  

   Graphics
  

       Adapter Description: Intel(R) HD Graphics Family
       Vendor ID: 0x8086
       Device ID: 0x0126
       Adapter RAM: Unknown
       Adapter Drivers: igdumd64 igd10umd64 igd10umd64 igdumdx32 igd10umd32 igd10umd32
       Driver Version: 8.15.10.2361
       Driver Date: 4-10-2011
       Direct2D Enabled: false
       DirectWrite Enabled: false (6.2.9200.16571)
       ClearType Parameters: ClearType parameters not found
       WebGL Renderer: false
       GPU Accelerated Windows: 0
  

       AzureCanvasBackend: skia
       AzureFallbackCanvasBackend: cairo
       AzureContentBackend: none
  

   JavaScript
  

   Incremental GC: 1
  

   Accessibility
  

     Activated: 0
     Prevent Accessibility: 0
  

   Library Versions
  

       Expected minimum version
       Version in use
  

       NSPR
       4.10.2
       4.10.2
  

       NSS
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

       NSS Util
       3.15.4
       3.15.4
  

       NSS SSL
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

       NSS S/MIME
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

  Check that Thunderbird is not blocked by a personal firewall.

• CD - DVD player gives me an error code 39. It wil work not at all.

  Raeder CD-DVD does not work. I did every thing posssibel and all I get is error code 39.

  What I have to do to get it corected.

  I don't know what you are referring to about paying anything.

  A free official Microsoft supported troubleshooting Web site, and it refers specifically to the troubleshooting steps to fix an error code 39.

  I refer members to the forum this site all the time.

  
  Your CD-ROM or DVD drive is not seen in the file Explorer (known as Windows Explorer in Windows 7 and earlier versions of Windows), and the device is marked with a yellow exclamation point in Device Manager. In addition, after you open the Properties of the device dialog box, one of the following errors is listed in the device statusbox:

  • Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

• Scanner not working not, fax all or nothing

  I bought the HP Color laser Jet Pro MFP M177fw ago, for about 2 weeks then we are difficult to receive faxes.  It sounds and then send a message saying no fax not detected, this is problem no. 1.  And problem # 2 is that I can't get the scanner to work... it worked very well 3 days agao now I get a message indicating the failure of the connection.  Printer works perfectly fine, so I know that my connection is good... just can not get the scanner to scan!  Not finding this user friendly machine at all!

  All solutions?

  Thank you!

  You can try this link to solve the problem of fax: http://support.hp.com/us-en/document/c03922065

  Problem #2 depends on the operating system you are using. For the most part, for the analysis of the issues, you must download and install first the software for your printer.  If you have not already done, just go to this page http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=us&dlc=en&sw_lang=&product=5445914#N179

• Windows 7 update check works not

  When I check the Windows updates f, I see the progress bar but nothing happens. I wait an hour, a day or a week and still nothing. Everything I have it see the progress bar that shows that it is to check the updates.

  I tried to manually start the update. I ran the repair utility. I have disabled the firewall. I disabled the anti-virus. I'm not having any luck. So far, all messages and forums I saw told to try everything I listed above. No luck.

  Can anyone help, since it's the second computer that I had this problem with.

  The value of the automatic updates to "never check updates" and then restart Windows. Then try again. :)