My HP MediaSmart programs work not at all

Similar Questions

• The use of the dedicated graphics card? Power management works not at all, no difference

  I bought a lenovo g500 and after installing every single player on this site, I decided to test some games from my pc to the laptop.

  Unfortunately, I see the games from the pc do worse than what they do on the pc (and the pc is old) so I think that the amd graphics card are not at all. Can someone explain how to enable the amd radeon video card? BIOS does not help and the CCC (catalyst control center doesn't help either).

  For example:

  I could run borderlands 2 in a little weak graphics on the pc perfectly.

  However on my laptop I can not even reach the main menu because of the very low fps.

  Another example is crysis 2, works perfectly on the graphic means on the pc, runs on 2-4 fps on the laptop.

  Features of the laptop:

  Video card

  Intel HD 4000 (one built-in) + ddr3 2 GB AMD Radeon HD 8570 (128-bit)

  Memory

  4 GB of ddr3 memory

  Processor

  Processor Intel Core i7-3612 QM @2.10 ghz

  Specifications of the PC:

  Video card

  NVIDIA GTX 650 1 GB ddr3 (128-bit)

  Processor

  AMD Dual Core 6000 + @ 3.2 ghz

  Memory

  4 GB of ddr3 memory

  Applications in full-screen mode using lags like hell, my mouse moves in slowmotion too much (real slowmotion)

  Edit: windows is 64-bit windows 7.

  The solution was to install windows 8 (bought a copy of the professional edition x 64), and then install the drivers from the site. Now everything works as expected. Must have had a problem with the windows 7 x 64 and x 86 drivers... Well, now it works.

  @shauni: tried with borderlands 2, could get 11-13 fps MAX during the game with graphics maxed out regardless of the diet plan, but as soon as I switched to windows 8, the amd video card started working and I now have 40-50 fps (which for me is UBER OPTIMAL). I always get 11-13 fps if I unplug my laptop well.

  SOLUTION OF THE SHORT VERSION:
  Install windows 8 (x 64 in my case)

  NOTE: the drivers on the site are buggy for windows 7 x 64 / x 86. Date today: 8 October 2013.

• Where in Windows 7 Pro to release the program does not run all computer starts?

  Where in Windows 7 Professional to release the program is not to turn on and start any computer starts?

  Hello

  Thank you for contacting Microsoft Community.
  You can go to start-> click on all programs-> select start. You can find all the programs that run at startup, here. Deleting will stop them from running at startup.
  You can also open the System Configuration to disable all programs running during startup. Go to start-> type msconfig.exe-> press ENTER. IF UAC prompts, click Yes. Opens the System Configuration window. Now go to the Startup tab and disable all applications (to remove the tick) you want to stop from running at startup. Click on apply and then OK. Restart the PC, once done.

• my cd ram work not at all a cd with Office 97 was put in and ever since all srew until execution of programs hurt

  a cd with a few windows xp and office 97 was put on my cd ram and since my computer were not the same, the cd - ram does not work I HAVE NO SOUND I am running windows vista home Premium and it's an acer5520 I want to put my computer as when I got it, also the enabling technology I am trying to ask to the factory settings and the password is not going thru and is the right password because I've written, please help I don't know much about computers only to learn it please help, thanks ill appreciate it.

  Hello

  The default password for Acer eRecovery is 6 zeros (0), unless you changed it.

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  See you soon.

• Middle button of the mouse - dosen't work not at all.

  So my action more used in Firefox was using the middle mouse button to open a new tab on a link. Suddenly after a format on my PC, the middle button of the mouse now refuses to be recognized by Firefox; He cannot even hold to auto-scroll or anything. I would like to confirm that the button works on other programs and games without any problem. Using using ctrl/shift + click is not perfect, but what I do until now. I use the latest version, here is a list of the things I've tried:

  -Check all the related: config with the "middle" in the search field.

  -Make a new profile and reset Firefox many times

  -Disabled people / removing addons/extensions

  -Wiping and installed Firefox completely - tried with no addons

  -Options checked

  Up here no luck at all, even no tried a few other browsers such as aurora & chrome with the same question basically.

  I don't know if you have a whimsical mouse with his own custom driver software. If so, it would be interesting to try to update the drivers. Alternatively, Firefox sometimes works best when switch you to the standard Microsoft mouse driver instead.

• Desktop Search/WDS works not at all - do not index - impossible to find securities even files I know are present

  Hello

  I installed Windows Search 4.0 installed on my machine yesterday. I added my file & Outlook to search settings, but it doesn't seem to be indexing at all. If I manually start indexing it immediately says "Index complete.", but it does not change the result of the search.

  Finally, I would also add 2 network drives to my data indexed for search, but I think this requires an add-on. Once I get Desktop Search works perfectly, I want to do this. Any suggestions are welcome.

  Critical information:

  • Windows XP Professional SP3
  • Windows Desktop Search - Index doesn't not given to all THE
  • I tried manual indexing starting - does not alter

  Thank you

  Brian

  Hi BrianL2,

  Run the patch from the link below: Windows search does not work and research is slow or stops:http://support.microsoft.com/mats/windows_search/en-us

  You can also check out the link below: Windows Search 4.0 Troubleshooting Guide:http://technet.microsoft.com/en-us/library/cc771814 (WS.10) .aspx

  If the steps above do not help, you can uninstall windows search 4.0 and reinstall it back. Follow the method below:

  Step 1:

  a. click on start

  b. click Control Panel

  c. Select Add/Remove programs

  d. click on see the updates

  e. Windows Desktop Search 4.0 appears here

  f. click on remove

  Install it from the link below:http://www.microsoft.com/windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx?tab=Install%20It

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update FP work not at all, from ver.21

  Hello world

  I now have problem to run the Flash Player on my old PC exe: absolutely nothing adds during the launch, or when clicking or using the XP Start menu launch.

  OS is Win XP SP2, Firefox is ver.43xx. I had this problem with old FP versions, not now, with the other exe files that can still be started normally.

  It started with FP update ver.21. : last month, Launcher "flashplayer21_ha_install.exe" (1 166 KB) has not begun at all: no hourglass, absolutely nothing to add. However, other applications has continued to launch / run correctly.

  After reading more on the Adobe website, this was easily solved by downloading the full installation program "install_flash_player.exe" (19 475 KB), which began normally.

  Very well, I got a solution even I didn't understand everything... So what, it worked.

  But now I have the same problem using ver.22, either by using Launcher "flashplayer22_ha_install.exe" (1 166 KB) or the full installer for version 22: "install_flash_player.exe" (19 551 kb): both start at all, and at the same time to run all launchers for other applications!

  Everyone's heard of similar problem?

  Any help will be appreciated: thanks in advance.

  Jean-Paul

  Hello

  Link below might be useful:

  Re: Flash player 22 does not launch on Windows XP2

• CD - DVD player gives me an error code 39. It wil work not at all.

  Raeder CD-DVD does not work. I did every thing posssibel and all I get is error code 39.

  What I have to do to get it corected.

  I don't know what you are referring to about paying anything.

  A free official Microsoft supported troubleshooting Web site, and it refers specifically to the troubleshooting steps to fix an error code 39.

  I refer members to the forum this site all the time.

  
  Your CD-ROM or DVD drive is not seen in the file Explorer (known as Windows Explorer in Windows 7 and earlier versions of Windows), and the device is marked with a yellow exclamation point in Device Manager. In addition, after you open the Properties of the device dialog box, one of the following errors is listed in the device statusbox:

  • Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

• Windows Update not working not at all, error 0 x 80246008

  XP SP3 will not update get error code 0 x for all attempts to updatess 80246008.  How can I get the update working again? I currently have 47 pending updaates which will be no tload.

  0 x 80246008
  WU_E_DM_FAILTOCONNECTTOBITS

  A download manager operation failed because the download manager could not connect (BITS) Background Intelligent Transfer Service.

  Did you try this?

  You can restart your computer, then use the steps below and check, if it solves problems-

  You receive an error message "the necessary services are disabled or unavailable" when you connect to the Microsoft Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/883822>

  `~`

  Reset

  You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start 0 Background Intelligent Transfer Service x 80246008

  http://support.Microsoft.com/kb/916251>

  `~`

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/?kbid=910337>

  `~`

  Restart one last time then test by launching a manual check of updates & see if the
  updates to install now.

  `~`

  The time and date of this moment in British Colombia, Canada is 07:55
  Sunday, March 30, 2014
  The time Pacific daylight time (PDT)-0700 UTC

  UTC/GMT is 14:55 on Sunday, March 30, 2014

  Current weather conditions in Vancouver

  Mainly cloudy 43 ° F / 6 ° C

• Scanner not working not, fax all or nothing

  I bought the HP Color laser Jet Pro MFP M177fw ago, for about 2 weeks then we are difficult to receive faxes.  It sounds and then send a message saying no fax not detected, this is problem no. 1.  And problem # 2 is that I can't get the scanner to work... it worked very well 3 days agao now I get a message indicating the failure of the connection.  Printer works perfectly fine, so I know that my connection is good... just can not get the scanner to scan!  Not finding this user friendly machine at all!

  All solutions?

  Thank you!

  You can try this link to solve the problem of fax: http://support.hp.com/us-en/document/c03922065

  Problem #2 depends on the operating system you are using. For the most part, for the analysis of the issues, you must download and install first the software for your printer.  If you have not already done, just go to this page http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=us&dlc=en&sw_lang=&product=5445914#N179

• Acrobat 9 Pro (Master CS4 Suite) works not at all after installation

  I had to reinstall all my software Adobe CS4 after I restore my iMac any HD issues I had with other things after upgrade to El Capitan (initially before restoring HD no problems with Adobe Acrobat Pro).

  Now with the own drive, I reinstalled my software including Acrobat Pro, and everything seems ok except my Acrobat Pro. I uninstalled and reinstalled just that as uninstalled and reinstalled everything and it still doesn't work.

  When I first open it upwards, he said: there are some missing items that need repair. I've attached a screenshot of the message. So I say keep and all I get is anything other than 'Acrobat' in the main menu choices but nothing underneath, no help no menu nothing. And when I try to stop it it won't let me, I have to force it to quit.

  Can anyone please help me why it does not work. I'm in my mind filled with questions of El Capitan and now having this problem just because I reinstalled it on my own HD again.

  

  Adobe does offer not supported for CS4, as we know, even if we paid for the software it is basically our bad luck now if we have problems. Hoping someone can help me on this problem through the forum, including Adobe support please

  Thank you

  Hi MightyMaya,

  It may or may not work, difficult to guess as its on an unsupported platform.

  We will recommend so you can use the application in a supported environment.

  Kind regards

  Nicos

• What is happening with the new version of Illustrator? Just improved the last update and since the scale of the effects on the basic forms of work not at all! so frustrated!

  I can't same scale forms a base logo without the widths of form changing all different. Yes, I restarted the program and restarted my computer.

  What is going on? something that should take me 2 seconds I've spent an hour trying to solve the problem.

  Help, please!

  KMoore,

  You also select the objects and uncheck snap to grid of pixels?

  This is what works for existing objects. What did you prevent only new objects aligned.

• My safari works not at all just freezes in my office and later. What can I do?

  My Safari version is 9.0.2 freezes, I can't work with it, at the moment I use chrome. What should I do?

  Safari of freezing may be due to Safari extensions, or third party plug-ins.

  In the Safari menu, click Safari > Preferences , and then select the tab Extensions extensions uninstall then leave then restart Safari to test. Continue until you find the incompatible Extension.

  If it is not a question of extensions, try troubleshooting third-party plug-ins.

  Back to Safari > Preferences. This time select the tab Security Deselect: plug-ins Allow. Quit and restart Safari to test.

  If it makes a difference, the instructions of troubleshooting plugins here.

• Add/Remove Programs does not locate all my programs installed after the replacement of hard disk

  I recently had to replace the hard drive of my laptop.  We have cloned the original on the new hard drive.  The programs are all visible in Windows Explorer in the directory program files.  However, they are in the utility "Add/Remove Programs".  I can't open the program in exe files.  I am told by the manufacturer of software, in one case, I need to uninstall the program and reinstall it.  I can't uninstall it without the Add/Remove utility (or can I?)  Thanks for your comments

  Try to reinstall the program without uninstalling. Boulder computer Maven
  Most Microsoft Valuable Professional

• spell check works not at all in live mail

  have windos 7... using live mail for e-mail.   not too computer savy.  spell check does not work.  I typed in jibberish and it should be corrected automaticalluy.  does not have.  clicked on the CBA and he said that everything has been checked.  How can I fix it?  Help...

  I assume you mean Windows Live Mail (WLM), not Windows Live Hotmail.

  Open WLM > tools > Options > spelling > put on the boat...
  Always check spelling before sending >
  Check my spelling as I type >
  Click OK

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.