update framework

Similar Questions

• I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here.

  I have a server to SP1 Windows 2008R2 with .NET Framework 3.5. I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here. Why it does this and how do I upgrade to 4.0 to run programs that require the 4.0?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Download 2015 AIR update framework

  I'm testing the Flash AIR updates using the files provided here source: http://www.adobe.com/devnet/air/articles/air_update_framework.html

  However, the download link for the AIR Update Framework files redirects, apparently for a long time obsolete.

  Someone has a link to the AIR Update Framework source files? Where can I get the required applicationupdater.swc file?

  are you looking for applicationupdater.swc?

  If so, it is included in each air sdk in the frameworks\libs\air directory.

• KB97417 update Framework 2.0

  Hallo,

  DAS wanted Update kann sich auf meinem PC nicht installieren und kommt wieder anyone therefore. Wie kann ich das abstellen. bzw. Warum sich der nicht Patch installed?

  Hi Mike, I remember, I have a question yesterday, while the problem still exists. Now, I find your answer and I did what you suggest. Now, the problem no longer exists. Very thank you. Roland

  Forgive me if I ask my question in German. I think I was on a site of the Germ. Ha.

• Framework 4.0 Client installation update.

  I can't install the update Framework Client 4.0.  I get the 0x13EC error message.  I have Windows XP.  What should I do to install?

  In many cases repair .NET Framework 4 is sufficient to fix the corruption, but in some cases, need to uninstall and reinstall .NET Framework 4.

  Windows XP users follow these steps to repair the installation of .NET Framework 4:

  1. Close all running applications.
  2. Click Start, click Control Panel , and then click on Add / Remove Programs.
  3. Click Microsoft .NET Framework 4 Client Profile in the list of installed programs, and then click Change/Remove.
  4. Select repair .NET Framework 4 Client Profile to its original state , and then click Next.
  5. Repairs completed, click Finish.
  6. Click restart now.
  7. After you log in to Windows, click the Start button, then type Windows Update in the box to search for and then click Windows Update.
  8. Click find updates. When the scan finished, click install updates to Windows.
  9. Follow the instructions on the screen to install the updates of Windows.

  Ref: http://support.microsoft.com/kb/976982

• used to install the automatic updates of microsoft net Framework 3.5...

  I run xp on a t760a and used to install ie8 .auto updates downloaded net microsoft frame work 3.5 at least 6 months ago since updated framework net 3.5 knit 4 net framework and I can't get rid of it please helpppppp...

  Hello

  change the target framework for ASP.NET ASP.NET 3.5 4.0.

   

  (1) check that IIS and ASP.NET properties are set to the 2.0 Framework. Note: Framework 3.5 will not be displayed in the list of the options installed due to the fact that the 3.5 framework is an extension of the 2.0 and not a stand alone version.

  

  (2) configure you web application in order to use the target Framework 4.0 by made a right click of your Web site in Solution Explorer > Property Pages > build > change "Framework target".NET Framework 3.5.

  

  

  This will update your web.config with the correct information file.

  OR

  1. right click on your website > Property Pages > build > change "Framework target".NET Framework 3.5.

  Although I am an employee of HP, I speak for myself and not for HP.

• error in update KB951847 x 86 0xc00ce556

  I get the above error when trying to install the .NET, updated framework 3.5 service pack 1 versions of .NET 2.0 to 3.5. OS is XP home. currently have .NET 1.1, .NET framework 2.0 service Pack2, .NET 3.0 service pack 2.
  Can offer you help

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://msdn.Microsoft.com/en-us/KB/kb00318785.aspx

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After running the cleaning of .NET Framework (not the Windows Installer Cleanup utility) tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• problem of updating Vista ultimate x 64

  OK, so I clean everything recently installed x 64 ultimate and started to update first round was fine but the second round of it (cause update framework 3.5) has started to just keep restart my laptop after having shown a 3de3 configuration and also sometimes shows a simple "Please wait" I tried using the vista disc to repair... .dint work so I tried sys restore (told me I had errors so I left it "fix" then after I tried to start the restore again pending and he always says there are errors.) I tried to start in safe mode, it starts to load and then it restarts after trying safe mode, he likes to show "Please wait" I don't know what to do and I do not understand why microsoft would release '7' and not to repair vista after so many people have bought and now we are told to go buy "7"... anyway sorry I don't understand, and I really need help for my laptop to work again...

  Hi Ihatemicrosuck,
   
  Thanks for posting on Microsoft answers Community Forums.
    
  Access to the Windows recovery environment mode and perform a startup repair and trying to boot to the desktop again.
   
  To access the Windows recovery environment:
  Keep tapping the F8 key to start the computer. If you see the option to select repair your computer select it and perform a startup repair.

  Also restore the operating system to an earlier point in time, follow these steps:
  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. in the System Restore dialog box, click on choose another restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.
   
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.
   
  If the problem persists, you will need to backup the data on your laptop and contact the manufacturer of your computer to reinstall Vista or perform a system recovery or a non emergency recovery.
   
  I hope this helps.
   
  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• install update KB951847 unsuccessful all time(10+)

  trying to install it on Windows XP update Microsoft .net Framework 3.5 SP1 and the .net Framework 3.5 family update for .net version 2.0 to 3.5. He keeps the default; last time I got the error code is 0 x 80070645. Ran set several times and update always fails. What should I do next? I am not pc trained or experienced. I read technical support information but could not find or delete the subfolders via amd64 and i386 BACK. Nor I was able to determine how to execute the command use foxfire staring at me. I know how to use a pc, software the same charge as long as no problems arise. But it's beyond my limited skills.  All other updates installed without problems; to include the update framework 4.

  How does this relate to the features of Microsoft Security Essentials?

  PS: KB951847 is an option, update no safety. Feel free to hide it.

• Necessary to allow a specific update that has been previously disabled

  Hello

  I use Windows XP Pro, in an enterprise environment. We use GPO SUS or WSUS databases or one of these acronyms.

  There was this '. " Update Framework NET4.0... "came back down and I would like to install it, and then click on restart, then it would have happened down once again, I would install, restart all over again. I made this type of five times. He never said it failed but he continued to come down so when she came back to the top once again, I disabled it in the list and told me she never reminds me to this particular update.

  Y at - it a screen somewhere I can go to see updates that I have "cleared/disabled" so that I can reactivate their?

  IRAM/mcp

  See if this helps:

  Open Windows Update, in the left column you should see Restore hidden updates, clicking this will take you to a list of updates that your hid and you will be able to everything you want to display.

  Kind regards

• 5701na stream 7: Stream 7 Kionix sensors and automatic rotation

  Hello
  I have two tablets of 5701na 7 stream, that were running Windows 8.1.  I did a clean install of Windows 10 on both.  "E/s of sensor devices" section in Device Manager shows the device of the accelerometer is installed and functional.  "Sensors" section shows the 'Kionix Fusion of sensors' device, but this device is marked with an exclamation point, and indicates the status of the device that the "device could not start, error 10". "
  
  I tried the original commercial version of Windows 10 Pro N and the latest Version 1511.  I also tried the Windows 8.1 and Windows 10 drivers on HP website.  I tried various downloads of individual drivers (inf25 and inf24) and install the devices manually as legacy material.  Even when the devices appear to install correctly, 'Sensor of Fusion Kionix' device stop with error 10, usually in a few minutes.  And I tried all the combinations on the two tablets, just in case it was defective.  The two tablets were turning correctly when running Windows 8.1.
  
  Everything works as expected, including modes of Tablet and desktop computer and the Windows button that switches between the display of tasks and the office.  But in Control Panel-> display and in "all the settings-> devices-> display" settings there is no list drop-down or turn on or off for auto-rotation.
  
  I installed and re-installed the OS at least a dozen times, trying different driver combinations in different orders, but the sensor Fusion won't stay not just active.  Has anyone else had the same problem?  Windows 10 is better suited to the Tablet, and I'd be disappointed to return to Windows 8. 1.
  
  Thank you.

  Turns out be the version "n" to win 10.  The "n" version not supported the pilot of Kionix, while the "n" version is apparently not.  As far as I can make out, the "n" version does not install the required driver update framework.  The driver seems to run through all the options, but it is not actually install the driver correctly.  With a version "n" not to win 10, driver installation takes about 10 seconds, the part of driver framework seems not to be triggered and the package successfully installed / active detection devices.  If you plan to install Win 10 Pro, remember to insert EI.cfg and PID.txt files in your USB image, substitute the Win 8.1 home activation key which is burned in the BIOS.

• Error: The resource is unavailable (cannot install KB967328)

  When I try to download microsoft. NET kb967328 (x 86) framework3.0 all I get is on a resource that is not available, I need it to run my nero10 please help

  They are listed in this article: http://support.microsoft.com/kb/923100/en-us

  You can get updates framework here:
  http://msdn.Microsoft.com/en-us/netframework/aa569263.aspx

  TaurArian [MVP] 2005-2011 - Update Services

• 8007064c error code and 100 error code

  downloading update framework 3.5 service pack I have codes error 8007064c and 100, please help

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• OpenGL / & HDMI (using the example GoodCitizen)

  Hello

  I want to make 2 scenes OpenGL for each display (internal and HDMI).

  I'm trying GoodCitizen sample application; but management HDMI does not work.

  Is it possible to make 2 scenes OpenGL? In fact, I made the same scene, but with 2 different viewpost since the mobile and television did not have the same resolution. Then in a second step, I would use 2 different (one for each device) cameras.

  Please help me...

  Nicolas

  Hi Nicolas.

  I just wanted to confirm you that this post was related to our discussion earlier this week and that the sample of Stereoscopic3D contained the updated framework code that solved your problems.  Thank you.

• That is to say 10: Flash freeze with the movement of the mouse

  Using FP 11.6.602.171 with IE 10 RTM of Windows 7 (x 64), many flash apps will freeze when the mouse cursor moves above the flash area.

  Deactivation of Accell HW in IE10 or FP files does not solve the problem.

  I made a video to show what is happening:

  https://www.YouTube.com/watch?v=I3DCFTMouxw

  PS: It is not past 10 Release Preview IE with flash 11.6.602.168

  Edit: Looks like someone has already filled a bug for the same thing:

  https://BugBase.Adobe.com/index.cfm?event=bug & ID = 3507613

  Finally! It looks like this

  THIS BUG has BEEN FIXED by Microsoft in the IE 10 June update framework:

  http://support.Microsoft.com/kb/2838727