used to install the automatic updates of microsoft net Framework 3.5...

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Do not install the automatic updates Windows XP, download error 0 x 80246008

  Have failed several times - have bits set @ auto - confident to rectify, not lack of computer knowledge and seems almost impossible to get thru to Microsoft - who are looking for an easy solution / single or coordinated for Microsoft - T.I.A

  Got error is 0 x 80246008

  Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2604111)		Saturday 16 June 2012	Automatic updates
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656369)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092)
  Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2657424)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656407)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2686828)
  Update of security suites for Microsoft Office 2007 (KB2596880)
  Update for the filter of junk e-mail in Outlook 2007 (KB2687267)
  Update of security for Microsoft Office Excel 2007 (KB2597161)

  Since you mentioned what to do a "Windows Installer are not available" message, try some of the suggestions in this thread to see if it moves things along:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Windows-Installer-Panel-keeps-poping-up-tried/7d4797d8-CB58-47C0-b3d1-53071102d816

• I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to

  http://support.Microsoft.com/kb/2608523

  Latest version

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• Securty update for microsoft net framework on windows xp Server 2008 x 86 {2572067} 1.1sp1 could not be installed

  tried several times ms11-078 security bulletin

  Hi johnhayes003,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you install the update?
  3. You are able to install some other updates on the computer?
  4. You have security software installed on the computer?

  Method 1

  I suggest that reset you Windows Update for default components and try to install the update, check if it installs properly.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If the previous step fails then I would suggest that you manually download and install the update.

  Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008

  http://www.Microsoft.com/download/en/details.aspx?ID=27715

  If the previous step fails then I would suggest see you the update history for the complete error message related to the failure of the update and post back with the details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

• Problems after the automatic update from Microsoft Outlook

  A

  about having Microsoft automatic update, Outlook on Vista has stopped working properly. I can open the program, write an e-mail or two and may be able to send a mail, then the program freezes. It happened just after a update to day to day. How can I solve this problem without removing the new updates?

  Automatic updates has also changed all of my Web pages. It's very upsetting. Why? Internet Explorer took over. What was wrong with me. I gave permission to the automatic updates program but does not reset my personal settings. How can I avoid this in the future?

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update to Microsoft Net framework 3 service pack 2 can I keep the 'old' or do I have to uninstall the

  • I have Windows XP Home Edition and I update through the Download Center.  I don't know whether to keep old service pack or not when the new ones are installed.

  * original title - when updated to service pack 2 for Microsoft Net framework 3 can I keep the 'old' or should I uninstall them. I have Windows XP Home edition. Thank you *.

  If you refer the download files, keep the incase you ever need to reinstall .NET that some of them may be prerequisets for future updates or service packs.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

  Vista Business Service Pack 2
  32 bit
  2007-12-office
  Acrobat 9 Pro
  Adobe Design Standard CS4
  Sony Vaio

  I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
  Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

  I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

  I can't use restore because it says that the disc is damaged and needs to be checked.

  Any ideas are appreciated.

  Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

  Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• I get the error message when you try to install the automatic updates of code 8007065E

  I use Windows Vista Home Premium with Service Pack 2. Two updates automatic Windows are repeatedly not to install and error codes are 8007065E Code and Code 1, which doesn't seem to appear on the Windows help site. Has anyone else had these codes and if so, how can they be solved?

  Hi Paul Rabbetts,.

  (1) how long have you been faced with this problem?

  (2) the windows updates are unsuccessful? Please provide the number of the Base of knowledge (KB)

  It is sufficient to indicate the complete error message you receive.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Let flow the fixit available in the article below and then check

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: Download and install the updates manually from Download Center in the clean boot state
  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4:  Clean boot the computer and then try to install the updates

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Can not install the important updates for Microsoft Office ona HP laptop running Windows Vista Home Premium Service Pack 2

  Hello I am running Windows Vista Home on my laptop.  I have windows update set to download and install updates as they come.  I can't get my computer to update update of security for Microsoft Office Excel 2007 (KB973593)
  Update of security for Microsoft Office 2007 System (KB973704)
  or
  Update for Microsoft Office Word 2007 (KB974561)

  I get the error code 646.  I tried to install all three at once, one at a time and let the computer do as I turn it off.  None of them have worked.  Any help would be wonderful.  Thank you for your time.

  AnyaAlex

  You may have missed this "sticky" post: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I got a message saying cannot find the tfswctrl file and wants me to buy what is called system tool and I can't get rid of or install the two updates of Microsoft KB2479943 and KB2481109.

  That is to say the computer has an infection and turn on my protection against viruses (which is on) and buy their protection against the virus.  Cannot run two updates from Microsoft and can not access all programs except the internet but don't let me download anything.  Missing file is: tfswctrl

  Hello

  System Tools is a fake antivirus / spyware. We recently saw a lot as it was distributed through advertisements on legitimate websites unsuspecting when an advertising agency got threaten.

  Whatever you do... do not buy this software.

  Here is a link to instructions on how to remove it.

  Good luck

• I just installed the automatic update to Thunderbird 24.4.0 and now some accounts will not send or receive.

  I use Thunderbird for many years with several accounts of e-mail with little trouble. Yesterday, I received the notice that an 24.4.0 update was available and I did this update. Immediately after, I started having trouble with my email. All but one account could receive emails and when I tried to "Get Mail", the status bar at the bottom of the screen indicates "skewered to pop - server.woh.rr.com.... "and the green progress on the right bar is almost entirely green for at least 60 seconds, then goes with no new emails and no error message. When sending, the situation is similar, except that after a period of time, I get the error message "failed to send the message.
  The message could not be sent because the connection to the server of SMTP smtp - server.woh.rr.com expired. Try again or contact your network administrator. "It is for accounts that worked perfectly before the update and without configuration changes have been made. I also downloaded a file of installation stand alone for 24.4.0 and reinstalled without result. Obviously a bug in 24.4.0.

  I installed a lot of windows updates and now it seems fine. Do not understand, but it's all good now.

• How do you install the automatic updates in Windows XP?

  I have re-installed Windows XP on my CD. But updates are also not pass. The current state is up to SP1 only. I'm unable to install SP2, SP3 and IE7, IE8.

  How do I reslove this?

  Hello

  You can manually download the SP3 and IE from Microsoft Download center

• Cannot install the automatic updates

  HIII.

  I have an Acer E - 572 G, and it's just more than a year. Usually it will update automatically every once in a while when I turn it on, but for the past two times he took a long time to update, before a message appears saying: it was "impossible to install updates. Undo changes. "This whole process takes about half an hour, and I have no idea why he suddenly can't update?

  Also; I have had problems since I've upgraded to 8.1 Windows - when I try to shut down my computer, the screen goes black and it does not, but she is still ongoing, and I held down the power button to stop it every time.
  Is as if I'm trying to close the cover (so as a disconnection or put in rest mode) it just goes black and unresponsive not but retains current execution until I'm physically turn off the power.
  I heard remains with sometimes is not good for the computer to stop like that, so I don't know if that could be linked to her now all of a sudden will not be updated?

  (And, btw, I contact the Acer and Windows after that happened, which is about a year.) Windows Me Acer necessary to upgrade their servers to accomedate the new upgrade and Acer told me that Windows needed to come up with a new update that worked for their servers - aka nor offered any help also, and nothing happened to solve the problem.)

  Any ideas as to how can I fix? :/

  Elen,

  I think the problem you are having with your Windows updates can be what we have in this article. See this article and if it's what he does, just let it do its thing. I also think that you may need to run an Update on your system, if it is to have some problems, to see if it will fix it. If you can't have Windows to run the update, try the procedure described in this article.