Update HP laptop

Similar Questions

• An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  It is one of the many problems that occur on my mac.

  Update of OS X El Capitan 10.11.4?

  1. backup Mac.

  2. install 10.11.4 combo update.

  https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US

• can I update my laptop graphics card

  Hi I was just wondering if it is possible for me to update my laptop computer graphics card, like the one I have is an integrated intel hd and it's simply not enough good for games, I want to play

  The laptop I have is hp Pavilion g6 and the model number is LS294EA #ABU with an i3m70 core of intel clocked at 2.4 GHz because I don't want to buy a completely new laptop, but if it comes to that I might have to

  Hello

  Basically, you can, with a cost, and I think that this cost can be more expensive than buying a new computer because you have to take into account:

  • New price of the card, and WHERE you can buy it because the laptop cards are not the same office maps. You can't buy any normal store,
  • Need new card system (can be),
  • Need new system of cooling because in general more powerful card pumps out more heat (you want more powerful card don't you?).
  • May need new power supply because your current diet is not suitbale for the card. (I ordered a machine with the Nvidia card and I need to order a 90W charger at the same time, not the normal charger 65W. They rejected just my order.)
  • Cost of the work.
  • Packages a lot, a lot of aspirin.

  I hope this helps.

• When you try to update my laptop using the update of windows, the program blocking updates.

  When you try to update my laptop that runs windows 7 service pk 1 using windows update, the program blocks updates! My setting are correct I already checked. Not had a problem with updates until I had to do a full restore.

  I would be extremely grateful for any advice. Thank you

  Try this: difficulty of Microsoft Windows Update problems and troubleshooting problems with installing updates

• How do I update my laptop so he sees my micro sd card, I inserted into my laptop, but it did not come

  How I update my laptop so he sees my micro sd card, I inserted into my laptop, but it didn't come up.

  help much appreciated.

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that the problem with you want to update the laptop so that it can recognize the micro SD card in the computer.

  Of course, I understand the inconvenience and will try my best to help you.

  In order to understand the issue more clearly, please provide me the following information.

  1. What exactly happens when you insert the micro SD card in the laptop?
  2. Do you receive an error message? If Yes, what is the exact error message and the error code?
  3. What is the brand and model of the laptop?
  4. How you try to connect the SD card? Is inserting into the card reader on your computer or you are using an external card reader?
  5. You see an error message or the exclamation point in Device Manager when you connect the SD card?

  I suggest you follow the steps how to check for the exclamation point in Device Manager.

  1. Click on Start and go to Run.
  2. In the prompt to run it, type devmgmt.msc , and then click OK.
  3. Device Manager opens.
  4. In Device Manager, double-click the device category.
  5. Check the yellow exclamation point against each category.

  It is possible that this problem would have occurred if the chipset drivers are not updated in the system.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  I suggest you to update the Chipset drivers on the manufacturer's Web site and check if it helps.

  If the problem persists, please follow method 2.

  Method 2:

  Try to run the built-in troubleshooting utility and check if it works.

  Open the hardware and devices Troubleshooter, please follow the steps in the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Why is it I can't update my laptop?

  Nice day

  I tried to update my laptop but its telling me there was a problem of updates and I ran a troubleshooting and might not be able to fix it. Please help my laptop model is HP mini 110-3701si. Thank you

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Full updates to reset Windows

  Be sure to run the script as administrator.

• After Windows Update the laptop screen brightness is updated with max.

  Original title: Windows 8 screen brightness problem

  Once I updated my laptop that my display brightness is set to max and my battery performance is low. I have tried everything to resolve even from the keyboard and Control Panel, but it didn't work - my eyes are painful.

  Hello

  Check with your system manufacturer support, their documentation online and ask for their
  Forums about known problems.

  Control Panel - Power Options - check power management

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

  I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

  It seems that there is a problem with the graphics card.

  Please try the step under the troubleshooting topic: Adobe Lightroom GPU troubleshooting and FAQ

• Problem with my cc speedgrade since I updated my laptop for windows 10

  Hi, Pleas help me!

  I had a problem with my cc speedgrade, since I updated my laptop for windows 10. whenever I want to start speedgrade there is an error warning that tells me speedgrade does not work? did anyone else have this problem or someone has an idea to fix

  Best regards

  Jan

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Hello

  I just solve my problem... Directory settings user removed from SpeedGrade and now everything is fine!

  C:\USER\xxx\AppData\Roaming\Adobe\SpeedGrade\9.0\

  Christian

• How can I download the whole package CS6 that I updated my laptop

  How can I download the whole package CS6 that I updated my laptop

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

• I've updated my laptop with Adobe X 1 and now all files PDF opens only as en ecyrpted word doc, pl

  I've updated my laptop with Adobe X 1 and now all my existing documents of the savedPDF open as a word document to encryted, HELP! Please, I beg you!

  Juliea salvation,

  I think that the PDF file association is not correct. Instead of a double click on the file to open it, please try below mentioned

  1. Right-click on the file and select open with...
  2. Select Choose default program
  3. Select Adobe Reader from the list (if it is not in the list, and then navigate to C:\Program Files (x 86) \Adobe\Reader 10.0\Reader, then select AcroRd32.exe)
  4. Don't forget to check the box "always use the selected program to open this type of file."
  5. Click ok

  ~ Dominique

• HP Envy (E7A75EA): help! Update firmware laptop = death! Flashing caps lock (2 flashes).

  Hi all

  I have just updated the firmware on my desire to 2014 (device E7A75EA code) to "F.68 Rev.A" to HP support and now it does not start!  Instead, all I get is a blank screen and the caps lock flashes twice (tells me means corrupt BIOS!)

  I followed the instructions carefully and no error message appeared in Windows, but the laptop restarts it impossible to load Windows and just gets stuck on this white screen.  I tried removing the battery/power cord, and then holding down the power button for 1 minute, but it did not help.

  Can I boot from the CD/USB and flash back, the old firmware (v43 I think)?

  Help, please!

  He's alive!

  I removed the CMOS, powered by the laptop battery (it starts in Windows), stop, put back the battery CMOS and continues to start correctly.

• Each single screw updated my laptop

  each time new updates come out my laptop downloads them and installs them, then I stopped as usual, installation however are there. When I go to use the next time, it starts normal with the scrolling green bar, and then he sits right on a black screen before the log should appear. This occurs each time new updates are published. so I have to just keep the start/stop button and then do system restore and keep my phone begging me to update.

  Hi MetalNinja247,

  Follow these steps:

  Step 1:

   

  Create a new user account and check if the problem is recurring in the newly created account.

  Step 2:

  If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.

  For instructions on repairing the corrupted user profile, see repair a user profile corrupted .

• Update problem, laptop cannot stop enymore

  When I block my user account is "configuration updates step 1 of 3 for 30 seconds, then when I disable comes to install the new updates, do not cut, that I takes colleagues overnight, the next day morning th laptop computer is always on and it starts again," he said.
  install new configuration new ubdates step 1 of 3 and so on. Now for months. What can I do?

  Hi Miss Elli,

  ·        Are you able to boot to the desktop?

  If you are able to boot to the desktop, the steps below:

  1. note the updates listed in the updated view. Steps to follow:

  a. Click Start, in the search box, type in update

  b. click on windows Update

  c. click view update history

  2. then download the stand-alone package updates. You can download the stand-alone version of the link with the number of KB below:http://www.microsoft.com/downloads and check if the problem is resolved.

  3 start the clean boot computer and try to install. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  Make sure that you reset the computer in normal mode (you can see step 7)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updating a laptop that has been months in offline mode

  I have an old laptop that was inactive for months due to a defective power cord. I fixed it and want to get it online.
  I want to install all the security updates Microsoft up to present while the PC is always online, because I'm afraid that the PC could get diverted, if it is connected online without the security updates already installed. The PC is running Windows XP service pack 2.

  Can I do this at once without downloading 100 updates on another computer and install them separately? My concern is valid that the PC can automatically be at risk before the updates are installed (even if I don't run all the apps until the end live update)?

  I have an old laptop that was inactive for months due to a defective power cord. I fixed it and want to get it online.
  I want to install all the security updates Microsoft up to present while the PC is always online, because I'm afraid that the PC could get diverted, if it is connected online without the security updates already installed. The PC is running Windows XP service pack 2.

  Can I do this at once without downloading 100 updates on another computer and install them separately? My concern is valid that the PC can automatically be at risk before the updates are installed (even if I don't run all the apps until the end live update)?

  It comes to this forum to update to Windows Vista. Suggest that the validation for the Windows Update Newsgroup
  In addition, we suggest you to download SP3 standalone full package , Save , then read these articles:

  Steps to take before you install Windows XP Service Pack 3

  Windows XP SP3 - read all the prerequisites for a successful installation

  Once you have read the articles and applied SP3, you can connect safely XP system to an internet connection IF
  the network has a router hardware firewall and/or the native XP firewall is enabled.
  Then, download the windowsupdateagent30 - x 86 .exe package and save it.
  Stop the service automatic updates of the Services console or open a command prompt and type in
  the following text and press enter

  net stop wuauserv
  net stop bits

  Let the open command prompt window
  Now install windowsupdateagent30 - x 86 .exe
  IF a message that is already installed, then you will need to add a command to windowsupdateagent30 - x 86 .exe

  WindowsUpdateAgent30 - x 86 .exe/force

  If you have problems to install the Windows UPDATE agent, see this tutorial .
  Restart the system later and then go to the Windows Update site.
  Install the updates of high priority Security first and the system will then be protected against all currently known vulnerabilities.
  Then install the updates at your leisure.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Microsoft updates keeps laptop computer misuse of my husband

  The other day I jumped the laptop open & he said that it has been updated 2 3 or something to that effect. It remained like that for hours without having it done. I had to do a repair and restart it at an earlier date to get going again. This has happened three times since. Today, I was actually online looking at something up when I hit my offline & this scenario all started again. What gives? What is c?

  The other day I jumped the laptop open & he said that it has been updated 2 3 or something to that effect. It remained like that for hours without having it done. I had to do a repair and restart it at an earlier date to get going again. This has happened three times since. Today, I was actually online looking at something up when I hit my offline & this scenario all started again. What gives? What is c?

  First of all, read this MSKB to and do step 1 to clean boot Vista: How to troubleshoot a problem by performing a boot in Windows Vista
  Open Internet Explorer by right clicking it's icon or a shortcut and choose "Run as Administrator" , enter the password if one is used, and then click on continue. Then, go here: How to reset the Windows Update components?
  Click the Fixit button and allow the Fixit run to its default option.
  When the Fixit is complete, restart the system, leaving in the clean boot state.
  Now let's see if the updates install now.
  If they don't, then do step 7 to cancel the State of clean boot and boot the system in normal mode of Windows.

  If they do not, please copy and paste the last lines 50 or so WindowsUpdate.log in your answer:
  How read windowsupdate.log

  MowGreen MVP Data Center Management - update of safety Consumer Services