Updating a laptop that has been months in offline mode

Similar Questions

• OIM11gR2ps2 how to use OID - 11.1.1.6 Connector for updating a user that has been created through LDAPsync?

  Hello

  I have two connectors configuration, a database connector generic to an Oracle database that the provisions of a user account (it works fine). The second connector, I am still getting set up properly is a LDAP connector specifically OID - 11.1.1.6.0.

  Use case:

  A user creates an account through automatic recording and is created simultaneously in OUD ldap with the johnDoe1 username. johnDoe1 connects in IOM and asks an instance of application called DBAccount. They fill out the application in all there information (user ID, fname, lname, phone, address, title, etc.). Once they support demand goes through the necessary approvals and after that it's approved successfully the info is put in service to the database. Once this operation has been successful, I would like to provision an update a users ldap entry that was created in the custom attribute ldapsync is called OUDappusername, this attribute is an attribute with value mutli because if demand for the other apps, they will be updated in the OUD aswell. This OUDappusername will be generated by an event handler or to pre-populate the plugin and the format will be "app |" user name' where app is the app they ask and User_name is the user name they use to connect to the IOM, for example "DBAccount". johnDoe1. If they keep asking other apps they will be updated in the OUDappusername so that they may have DBAccount | johnDoe1 and ask another application called app2, then they will also have app2 | johnDoe1 and so on.

  Is this possible with the connector and how do I set it up to users update rather than set up a new account in the OUD?

  The question:

  I currently have the configuration of connector so whenever I have set up a user creates a new user rather than allow me to simply update a user. It is possible to configure the connector for updating existing users is born through ldapsync, rather than those created through the app instance configuration. I have found no documentation on that.

  Thanks in advance,

  J

  Edit #1 - I changed the wording and added more details.

  Edit #2 - I reworded my question to be more specific and focus on a single issue and changed the title to be more specific.

  Post edited by: 6d986dc3-6c9b-401d-9892-76032e7a1e05 on April, 07/04/2014

  Hello

  I just wanted to post what we found the answer. We did not use the connector, but what we did was we created a custom, adapter, which is a small and associated java class then new task in the process definition for the database resource in the console design and we made calls to jndi for the ldap Protocol to update this attribute multivalue. It was very quick and easy and could be tested before the implementation of the IOM. Thanks again for all the help and talk me through the procedures.

  Thank you

  J

• First Elements 9 requesting an update of driver that has been done, not read video

  I have the first elements 9, which worked perfectly for years, who recently was to give me a box of pop-up message saying that the Intel Series 4 expresschipset display driver needs to be updated.  I went to the Intel site and run their tool of diagnosis of update and update this driver and vefified has been updated.  I restarted the computer, uninstalled and reinstalled Prime - it still calls for the update and does not display any video, making it essentially useless.  Any suggestions?  I have only heaviely use the program about once, twice a year... I don't want to be forced to update simply because he behaves badly, please and thank you

  Debra888

  Yes, the BadDrivers.txt file is for Premiere Elements 9.0/9.0.1 running under Windows 7 64-bit when you use the following specific instructions for what you have

  Local disk C

  Program data

  Adobe

  First Elements

  9.0

  and in the folder 9.0 is the BadDrivers.txt file that you delete. Be sure to have the folder Option show hidden files folders and active readers so that you can see the full quoted path. After you open a Premiere Elements project, the program will generate BadDrivers.txt file again and I hope your problem is gone.

  The rationale for deleting the file BadDrivers.txt located in the post 10 of this older thread.

  http://forums.Adobe.com/thread/732067

  This file has been a life saver for many - and even those with later versions to 9.

  Please let us know if it worked for you.

  Thank you.

  RTA

• where I can download windows 2000 for free that I have the key number for my laptop that has been updated for xp, but now it is really slow, so I want to go back too 2000

  where I can download windows 2000 to my laptop, it was the original windows for my laptop but I upgraded to xp, thinking that it would be quicker but it has become very slow, so I want to go back to 2000, but it was preinstalled and I do not have a disk but have the keycode on the basis of my computer laptop can anyone help

  You are unable to download any version of Windows.  You must contact the computer manufacturer that built your computer and install Windows 2000 on it to see if you can get a copy of their share.  I highly doubt you will be able to because Windows 2000 is entirely not taken in charge since 2005.

• Is it possible to update a column that has been selected as a KEY?

  Hello.
  
  I'm trying to run an interface that takes a distinct value of the column source and fill in the dimension of the target (table). Dimension of the target (table) has an another colum (surrogate key) which is filled through a sequence in oracle. Source and target are in Oracle. LMK used (Oracle Oracle (DBLINK) 2).
  
  Problem is when the key column must be defined with update so when I run the update checking interface in the active mapping window and update 'YES' in the IKM (incremental update of Oracle). I have an error message that ODI performs a step for updating the current lines (although table is empty) and says the table.column name is not valid. I agree that it makes sense, but how to solve this problem.
  
  If I select the surrogate (column number sewurnce) as gived key key always error. So to be precise how to deal with such a situation. Is it possible that I have create another column that is populated by a separate number by ODI and I do that as a key.
  
  Any help will be much appreciated.
  
  
  
  Table_name1 T update
  Set)
  
  ) =
  (
  Select
  
  of PFTW. I have _Table_name $ S
  where T.column_name1 = S.column_name1
  )
  
  where (column_name1)
  en)
  Select columns_name1
  of PFTW. I table_name1 $
  where IND_UPDATE = 'U '.
  )
  I'm the separate lines by checking the checkbox separate lines in the target zone properties window.

  As I understand it, you have two columns in the target, an excerpt from the Source a different surrogate key (that is, the sequence). In this case you would never updated, so go Oracle incremental updates with Option No. update and insert Yes.

• Hello, I just bought a new windows 7 service pack 1 than my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  my laptop is a lenovo

  On Sunday, October 5, 2014 12:59:11 + 0000, dougdgp wrote:

  bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  my laptop is a lenovo

  Depends entirely on this laptop you have. If it has a 64-bit processor
  You can use 64-bit Windows. If a 32-bit CPU, you can't.

  If you don't know you have, hold down the Windows key and press
  Break | Break. It will tell you if you have a 32-bit
  processor or 64-bit processor.

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  How your post is related to Windows Update (compared to the Windows upgrade)?

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error: "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'

  Original title: laptop won't read the music files stored on external hard drive

  I have an old Compaq laptop Windows XP, so it was out of memory I transferred everything on a Portable Seagate (500 GB) hard drive and started to access it. It's worked well for over a year, but lately, began to stop playing my music files. Absolutely everything on the hard drive opens, however, images, files and folders, but when I go into Windows Media Player, it pops up with this error message:

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.
  I have not modified parameters or anything that moved. I used to be just able to restart the laptop, or disconnect and reconnect the hard drive and it works again, but now it or not will be not at all, or it will cut off half way through a song and then not to play anything more.
  I can't find any support for this problem because the phone reads that the hard drive is there, and everything else works. Only the music doesn't. I tried to play music on a connected USB and it works fine. I'm so confused!
  Hi lkm0293,
   
  Here are some articles that you might find useful:

  Windows Media Player Error Message help

   

  Error message when you type the name of a file to play with Windows Media Player: "Cannot open file."

• I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone.

  I'm at my wits end, HELP ME! I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone! This happened to me several times and I can't ever find anywhere. It just disappears. Can someone help me? I want to know why he spends, how I can solve this problem how can I recover my work and where it went! I blame my laptop or windows or the manufacturer?

  I wrote a full description of my problem, but of course it also disappeared. I type 2-300 words and pooofff they disappear I can't explain it better or go on any more because I just it loose once AGAIN all! I tried to explain in more detail a related problem, but of course he gone too so I send this before I lose too.
  original title: email disappears

  The text turns blue, because you mentioned it.  The most plausible explanation to highlight all of the text while typing is due to hit CTRL-A, which is the same as Edit | Select all.  Then when you type a character when this text is highlighted, then highlighted (blue) text is replaced by the character you typed.  Be very careful to not press the CTRL key instead of the SHIFT key when you type a capital letter A or else which will never happen.

  If your cursor jumps around then also scan your system against viruses and malware.

  Steve

• I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  It seems that your version is not the latest.

  Check help / about... what version it reads.

  It should be 2015. (9.2.0 build 41)

  Otherwise, please update your version via app updates... or cloud in respect of aid.

• Cannot access the story I just bought Adobe story, but when I press sign there appears a ST logo with a spinning @bar that has been on my screen for hours

  I just bought Adobe story, but when I press on connect it appears a ST logo with a spinning @bar that has been on my screen for hours

  Can you please try the following?

  -first of all, make sure that you have flash player update. You can get the latest version of https://get.adobe.com/flashplayer

  Now open a session in anticipation of history for some time see if it solves your problem or not

  -If it don't then try opening your browser's private browsing/incognito mode and try connecting to the story from there

  If you are able to connect then you should try clear the cache and cookies of your browser

• How to delete data that has been downloaded? (NOT all data)

  Hello
  
  I would like to delete data that I downloaded up to a point. I'm on 11.1.2.1.
  
  The dimensions I have are;
  
  Accounts
  Periods - FEB
  Years - 2013_2014
  -Real-world scenarios
  Versions - final
  ABCGroup
  Products
  POV - monthly
  
  I do the download via the text file and have a rules file to get the upload done. ABCGroup has several cost centers, several account codes, product codes and amounts. That's what is downloaded.
  
  Example:
  
  Real, Final, monthly publication, 2013_14, FEB
  ABCCGroup, accounts, products
  403,5732,000,-3165694.41
  
  403,7321,000,-36081516.27
  
  403,7321,101,36081516.27
  
  I would like to know if it is possible to delete all the data that has been downloaded by this text file.
  
  Thank you

  Hello

  Just do the same combination in excel add in or smart view and change the value to #Missing and send it.

  The other way is that you can write a script for the same and use CLEARDATA inside.
  Please see the link - http://docs.oracle.com/cd/E12825_01/epm.111/esb_dbag/frameset.htm?dcadevcs.htm

  Hope this helps

  Concerning
  OHS...

• Just bought an album & download, a track that has been 'Album' only has not downloaded, but it has been purchased?

  Just bought an album & download, a track that has been 'Album' only has not downloaded, but it was purchased?

  Ive tried everything I can think off, but cannot get loaded. Tried all the usual verification, for available downloads etc. both my Mac and iphone but its does not work.

  When I view the album on Itunes, her show songs that downloaded, except this last song, which only says: 'bought', but no option to download.

  So, ive got 7/8 of an album! which is a rip off and very frustrating?

  Anyone have any ideas?

  Steve

  You and I can have a similar problem. Has been the "Skeleton Tree" album by Nick Cave and the Bad Seeds?

  I am facing the same issue. I can get the song 'Album Only' to appear in my music library by clicking on the album and then clicking on "See the complete Album." However, I still cannot sync with my iPod/iPhone, and unless I click on "Show full Album", I can't do my music library to interact with it at all (that is, if I play the full album, it ignores the song 'Album Only'). And even if I do this, I can't move it to a playlist or something like that.

  I would really like to have an answer to that as well.

• How to locate the owner of an iPhone that has been reported lost and deleted?

  How to locate the owner of an iPhone that has been reported lost and deleted?

  You return to the police or to the carrier the phone is bound to and let them deal with him. Privacy laws prevent Apple, or the carrier to disclose this information.