Update IDM 8.1 to 8.1.1 newest

Similar Questions

• Add IDM to the list of add-ins checked

  Older versions of Mozilla Firefox allowed for Internet Download Manager module and I used it frequently, but with the last update I can use it is no longer. When will this fix?

  Thank you!

  Hi ragempa, Mozilla announced a procedure for publishers of extensions to submit them and get them signed by the team of modules. No doubt IDM will do it later. But it shouldn't be compulsory...

  In the final version of Firefox 40 and 41, the signature requirement is not applied, there is only a warning. If your says the extension is blocked because it is not signed, please check the following parameter:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the xpi and make a pause so that the list is filtered

  (3) if the preference xpinstall.signatures.required is in bold and "user set" true, double-click on it to set it to false

  If that is already set to false, then another problem with the add-on that is originally not not to work. Could check you updates IDM?

• Question about IPS signature updates.

  I installed ASA5510 (with AIP10) on our customer site. But I can't find out how to upgrade the IPS signature. Automatic update is possible? i.e. through CCE id.

  Our client is not MC IDS. What should we do? Let me know, please.

  Without MC there are no automatic updates directly from CEC. However, you can configure a local server (SSH or FTP) and copy packages to update signature for this EAC server. Then, you can run a manual upgrade of IDM (https://1.2.3.4) or the CLI (session in the ASA SSM card) or set up a schedule of automatic upgrade that will modernize the sensor on the local server periodically. To configure the auto updates, IDM would be the easiest to use. If you want to do a manual upgrade here is an example for the CLI:

  session # 1

  # conf t

  # ssh host 1.2.3.4

  # upgrade scp:[email protected]/ * ///home/user/upgrades/ IPS-sig-S192-minreq-5.0-1.pkg

• IaaS Service could start after update vCAC 6.0.1

  Hello

  I've updated our Infrastructure 6.0 to 6.0.1 vCAC.

  Device update IDM worked well and also vCAC device update completed without error.

  After the restart of the IaaS Service could start.

  I continued to upgrade the server IaaS components because I thought that different versions could cause problems.

  Update of components IaaS completed without errors as well.

  Then I rebooted vCAC device once more but the defective still service to start.

  

  Connected to the portal, DEM status shows the following errors:

  

  Anyone know how to fix this?

  Thank you!

  I think that the newspaper seems ok (errors are more like warnings that some notifications are not received until the services are started). According to the newspaper, it looks like that at least part of the IaaS is configured (integration of SSO works and so on). Thus, the IaaS service shows as being down because of DEMS (as you pointed out in the original post). You can also check this by going to: https://vcacVA-ip/component-registry/services/status/current and find the part "iaas-service" of the xml. It will be an error message. So, it might be that the DEM is not started. I don't remember the exact windows service name of the service DEM, but if you go to the list of windows services, you might find some vCAC services that are not started it. If this is the case, begins just services will change the status (after 2-4 minutes).

• Internet Download Manager works only with firefox

  Identical to the header, last updated will not IDM work. Had to go back to an older version of firefox for IDM would work.

  1. team Mozilla updates FireFox browser every six weeks, that's why our team also updates IDM integration into FireFox so every six weeks. Team Mozilla updates FireFox browser every six weeks, that's why our team also updates IDM integration into FireFox so every six weeks. Please make sure that you have installed the latest version of IDM.

  2. Please check that the integration in FireFox is enabled in IDM "Options-> general" dialog box

• You will need to add the number of days to the end date of the users.

  Hello
  I have a code where we adding the number of days (30) to the current date and update IDM DB user end date.
  Now, we have a requirement to add the number of days (30) to the existing fence of user instead of add to the current date.
  
  * public String incrementDate (int daysToAdd)
  {
  Start date
  log.info("NotifyLastDayOfService::incrementDate(): entrez»);
  SimpleDateFormat sdf = new SimpleDateFormat ("yyyy-MM-DD 00:00:00");
  Calendar c = Calendar.GetInstance ();
  c.Add (Calendar.DATE, daysToAdd); number of days to add
  String PROMOTIONDate = sdf.format (c.getTime ());
  log.info("NotifyLastDayOfService::incrementDate(): sortie»);
  return Nouvelle_date;
  }*/
  
  Have any body set up this scenario?
  Please suggest.
  
  
  Thank you
  Kalpana.

  You can try this as well

  where oimAttribute = "Users.End Date"

  public String updateOIMAttributeForDateType (String oimAttribute, Date endDate, long take, String daysToAdd)
  {
  tcUserOperationsIntf userOperationsIntf = null;
  HashMap modifyMap = new HashMap ();
  HashMap searchmap = new HashMap ();
  SimpleDateFormat formatter = new SimpleDateFormat ("yyyy-MM-DD hh: mm :"); ")
            
  try {}
  Calander cal = null;
  cal.setTime (endDate);
  Cal.Add (Calendar.DATE, Integer.parseInt (daysToAdd));
  Date Edate = cal.getTime ();

  modifyMap.put (oimAttribute, Edate);
  searchmap.put ("Users.Key", String.valueOf (take));
  userOperationsIntf = Platform.getService (tcUserOperationsIntf.class);
  tcResultSet searchset = (searchmap) userOperationsIntf.findAllUsers;
  userOperationsIntf.updateUser (searchset, modifyMap);
  return a SUCCESS;
  } catch (Exception e) {}
  If (Logger.isErrorEnabled ()) logger.error (e.getMessage ());
  error return;
  } {Finally
  try {}
  If (userOperationsIntf! = null) userOperationsIntf.close ();
  } catch (Exception e) {if (logger.isErrorEnabled ()) logger.error (e.getMessage ()) ;}}
  }

• Oracle Internet Directory Config error Linux x 64 java.lang.NoClassDefFoundE

  Hello
  
  I'm configuration (v11.1.1.2) identity management product, the installation was very well made. I started to configure it using the config.sh script. I chose to create a new weblogic domain and selected to configure OID and OVD.
  
  I am running Red hat linux 5.4 x 64 bit OS.
  
  I gave all the parameters configuration, such as requested and if failure at the stage where it creates the Oracle Internet Directory store with the error in the log below:
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM EVENT CONFIG] onConfigurationStatus-> ab274dda-a540-4666-bc1b-9d367b26b3b9 StatusMsg: {0} creation ASComponent.
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] reportStartConfigAction: EXIT...
  [2011-02 - 02T 18: 20:29.969 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] beginning to create the component
  [2011-02 - 02T 18: 20:30.057 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Action for the oid1 is to CREATE
  [2011-02 - 02T 18: 20:30.057 + 00:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] trying to create the oid1 component
  [2011-02 - 02T 18: 20:30.447 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] OID onCreate... [[
  
  ]]
  [2011-02 - 02T 18: 20:30.466 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] not a DB CARS: 10.23.74.119:1521:RMG
  [2011-02 - 02T 18: 20:30.467 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] DB connection string: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.23.74.119) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = RMG)))
  [2011-02 - 02T 18: 20:30.885 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] SCHEMA_VERSION_REGISTRY Control Panel...
  [2011-02 - 02T 18: 20:30.894 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Version of the schema OID: 11.1.1.3.0
  [2011-02 - 02T 18: 20:30.911 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Num of OIDs: 1
  [2011-02 - 02T 18: 20:31.029 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] TO validate input parameters
  [2011-02 - 02T 18: 20:31.097 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] Ports: nonssl = 3060 ssl = 3131
  [2011-02 - 02T 18: 20:31.097 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] directory specific OID creating
  [2011-02 - 02T 18: 20:31.098 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] JPS Files already exist: oracle.as.config.ProvisionException: Dest file (/ opt/oracle/middleware/asinst_1/config/JPS/jps-config-jse.xml) already exists.
  [2011-02 - 02T 18: 20:31.098 + 00:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] files already exist: oracle.as.config.ProvisionException: Dest file (/ opt/oracle/middleware/asinst_1/config/JPS/system-jazn-data.xml) already exists.
  [2011-02 - 02T 18: 20:31.674 + 00:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000Irb_0ZpFw000jzwkno1DIOnZ000003, 0] []
  java.lang.NoClassDefFoundError: oracle/security/xmlsec/util/Base64
  to oracle.security.jps.internal.common.util.JpsCommonUtil. < clinit > (JpsCommonUtil.java:212)
  at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:155)
  at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:166)
  to oracle.iam.management.oid.install.wls.OIDComponentHelper$ 1.run(OIDComponentHelper.java:396)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.iam.management.oid.install.wls.OIDComponentHelper.setCredInCSF(OIDComponentHelper.java:389)
  at oracle.iam.management.oid.install.wls.OIDComponentHelper.setPasswdsInCSF(OIDComponentHelper.java:361)
  at oracle.iam.management.oid.install.wls.OIDComponent.onCreate(OIDComponent.java:177)
  at oracle.as.config.impl.OracleASComponentBaseImpl.createComponent(OracleASComponentBaseImpl.java:596)
  at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:105)
  at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:144)
  at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
  at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
  at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
  at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
  at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
  at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:861)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: java.lang.ClassNotFoundException: oracle.security.xmlsec.util.Base64
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
  
  Help, please.
  
  If necessary, I can post the full log... but his very large... So just post newspapers around the error message...
  
  Published by: 833360 on February 2, 2011 10:59

  Hello

  Few things to check.

  What is the JDK/JRE Version.
  What is the version of WLS?
  From the error lines, I can see THAT RCU Version is 11.1.1.3.

  If the WLS version is 10.3.3, so it is not supported with IDM 11.1.1.2.

  Suggestions: update IDM to 11.1.1.3 and configure it. Here are the steps.

  -Cancel the Configuration Wizard, delete the directories of domain Instance ACE and WebLogic OR if it's on the virtual machine, you can return to the previous snapshot.
  -Update IDM in 11.1.1.3
  -Execute config.cmd or confg.sh

  Let me know the result.

  Thank you
  GK

• String operation

  Hi all
  
  
  Hope you are doing great!
  
  
  I have the following string as parameter of a procedure. Two fields, name and value separated by *: * and each record separated by *, *.
  
  fdicrate:0.002314, segId1:0.4, segId2:0.3, segId3:0.2, segId4:0.1, segId6:0.0, segId7:0.5
  
  
  I need to parse through the srting and update a table with the name and the value...
  
  
  Any help would be really appreciated.
  
  
  
  My current proc looks like this individual getting IN settings to update the table...
  
  PROCEDURE set_ecrspread)
  FDIC in VARCHAR2,
  DDB in VARCHAR2,
  Cape in VARCHAR2,
  mm in VARCHAR2,
  internal IN VARCHAR2,
  Corp in VARCHAR2,
  National IN VARCHAR2,
  last_edit IN VARCHAR2,
  ReturnStatus OUT VARCHAR2
  )
  AS
  v_code NUMBER;
  v_errm VARCHAR2 (64);
  BEGIN
  
  
  UPDATE idm.characteristics
  SET valtext = fdic,
  last_edit_by = last_edit,
  last_edit_ts = SYSDATE
  Situation WHERE = 'Law' AND chardomain = 'FDICRate' AND charcd = 'FDICRate ';
  
  UPDATE idm.characteristics
  SET valtext = national,
  last_edit_by = last_edit,
  last_edit_ts = SYSDATE
  Situation WHERE = "Act" AND chardomain is "ECRSpread" AND charcd = "7";.
  
  UPDATE idm.characteristics
  SET valtext = ddb,
  last_edit_by = last_edit,
  last_edit_ts = SYSDATE
  WHERE State = 'Law' AND chardomain is 'ECRSpread' AND charcd = '6';.
  
  UPDATE idm.characteristics
  SET valtext = cap,
  last_edit_by = last_edit,
  last_edit_ts = SYSDATE
  Situation WHERE = 'Law' AND chardomain is 'ECRSpread' AND charcd = '4';.
  
  UPDATE idm.characteristics
  SET valtext = mm,
  last_edit_by = last_edit,
  last_edit_ts = SYSDATE
  Situation WHERE = 'Law' AND chardomain is 'ECRSpread' AND charcd = '3';.
  
  UPDATE idm.characteristics
  SET valtext = internal,
  last_edit_by = last_edit,
  last_edit_ts = SYSDATE
  Situation WHERE = 'Law' AND chardomain is 'ECRSpread' AND charcd = '2';.
  
  UPDATE idm.characteristics
  SET valtext = corp,
  last_edit_by = last_edit,
  last_edit_ts = SYSDATE
  Situation WHERE = 'Law' AND chardomain is 'ECRSpread' AND charcd = '1';.
  
  
  ReturnStatus: = "update";
  
  
  
  Thanks in advance
  MB
  
  Edited by: user32322435 May 14, 2010 14:26

  Hello

  Here's one way:

  MERGE INTO  table_x     dst
  USING (
       SELECT     REGEXP_SUBSTR ( :param
                       , '[^,:]+'
                       , 1
                       , (2 * LEVEL) - 1
                       )          AS name
       ,     TO_NUMBER ( REGEXP_SUBSTR ( :param
                                   , '[^,:]+'
                                   , 1
                                   , (2 * LEVEL)
                                   )
                   )          AS val
            FROM     dual
            CONNECT BY     LEVEL <= 1 + LENGTH (:param)
                                            - LENGTH (REPLACE (:param, ','))
        )               src
  ON    (src.name          = dst.name)
  WHEN  MATCHED THEN UPDATE
  SET   dst.val = src.val
  ;
  

  I did a lot of assumptions about what you need and what amounts to your data.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT statements) so I can recreate your table because it is before the UPDATE.
  Also post what the table should look like after the UPDATE.
  It never hurts to say what version of Oracle you are using.

• Drive DVD W520 does not not with Windows 10

  After the upgrade to Windows 10, the DVD drive no longer reads disks on the W520. It still works under Linux, so it's probably a driver issue. I checked the drivers on the Lenovo site and there is no DVD driver. The power player and opens but nothing is read off the drive. It does not appear in 'my computer '. Device Manager shows the drive with a caution triangle icon. Attempt to automatically update the pilot says that is already the newest one installed. Solutions Center Lenovo says that the driver is disabled. Deactivation and reactivation of the reader do nothing. How can I solve this problem?

  Looking for more in the Device Manager, I found that there is a registry error (code 19). Follow this guide and it fixed it.

  https://support.Microsoft.com/en-us/KB/929461

• DeskJet 710C: HP Deskjet 710C does not work under Windows 10

  As I moved to Windows 7, I had to connect the printer via a USB/LPT connector and issue the fix in this link http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Deskjet-710-720-810-820-1000-Series... so that it can work properly. It is printed without flaw during my use of Windows 7.

  Then came an upgrade of Windows 10... And when installing my printer is not able to print more than any way, form or content.

  Basically, the or crashes when I try to print something. EventLog exposes the following error (translated from English):

  Application with the error name: spoolsv.exe, version: 10.0.10586.0, time stamp: 0x5632d53b

  Name of the module with the error: HPVSCP50. DLL, version: 1.0.0.6, time stamp: 0x4431bcd4

  ExceptionCode: 0xc0000005

  Checking this list http://support.hp.com/us-en/document/c04658195 shows that the printer is supposed to work.

  Finding a few more people with similar problems and solving the issue by using another PC, I thought that Windows 10 not like USB/LPT connector I have on it. So I got a cheap printserver I plugged in the printer, and reconfigured Windows to use the printserver port to print. PrintServer works perfectly, but still the HPVSCP50. DLL crashes when you print something (even something basic like a Windows Test Page), close the process.

  Tried to grab the drivers from Windows Update to make sure that I had the newest and still no go. HP website refers to Windows 10 drivers by Microsoft than those needed to be used, but this driver crashes. So I guess it might be a flaw in Microsoft Windows 10 provides driver.

  Anyone have an idea how I can get Windows 10 just talking to my old and trusty printer? Because I still have the printer toner, and I know the printer is still operational to 100%, I think it should work, also because it is listed as a printer to work for Windows 10.

  Sorry, but I would like to buy a new printer.

• Videos stopped working

  After being directed to update my version of Shockwave Flash to the newest version (11.3.300.268), all the videos stopped showing. What should I do now? Can I reinstall a version of earliewr? I use Firefox 14.0.1

  Flash Player Help. Installation problems | Mac OS

  Flash Player Help. Installation problems | Flash Player | Windows

  Mylenium

• It shows "idm cc disabled due to security issues" I can to activate

  the IDM module is disabled due to security issues, how I ennable

  Update to the latest version of IDM.

• new faucet botton has stopped working after a few updates

  Hi, FireFox has had a few updates for IDM modules as usual, but after he (new tap botton) stopped working, even the new tap since the right-click option does not work, please help

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Pavilion 15-n010tx: HP 15-n010tx BIOS update problem - no internet. Help!

  Hello

  On how to solve the problem of Intel VT - X on the BIOS, even if I enable vt - x on the BIOS it doesn't allow me to install HAXM. So I decided to update the BIOS. My BIOS version was F.66 A. I checked on the HP software and the download page for the BIOS for HP Pavilion 15 - n010tx. He showed two results:

  http://support.HP.com/in-en/drivers/selfservice/HP-Pavilion-15-n000-notebook-PC-series/5401225/model...

  

  I downloaded the update of the BIOS to F.67 and used the Setup program to update my BIOS sucessfully. But then I noticed that I can not internet CCADE on Google chrome. So I decided to restore the BIOS. But on his way, I chose the version F.67.A himself to a restore to. this has changed my current versions and earlier BIOS F.67. I tried to install the F.66 A by downloading its download file, but does not have that, the update of the BIOS in the installer option has been disabled.

  Tried to install A F.66 via external USB using HP_TOOLS and create image files. But during the installation it management through Firmware utility, it says "Unable to BIOS Open File signature."

  

  Maybe if I can find the correct SIG file, it will be solved.

  I messed up a lot. My pc boots fine. Everything is going well except the internet connection.

  Any help will be appreciated. Thanks in advance

  Nikhil-

  Hi all

  I managed to solve this problem of "no internet Connection" after a BIOS update "F.67 has ' on Hp computer pavilion laptop 15-n010tx with W8.1."»

  I just checked in IDM for recovery of a file download and it said 'cannot open the Internet socket. I did some research on Google and resolved this.

  The Solution is to:

  http://forums.techguy.org/networking/745349-open-socket-error-no-Internet.html

  ------------------------------------

  Press Windows + R and type CMD and press to enter.

  At the prompt, type:

  netsh winsock reset catalog

  and

  netsh int ipv4 reset reset.log

  -------------------------------------------

  A response by message 'Avistor '.

  Thanks to him.

  and thanks to "erico" for the quick response.

  Best regards

  Spoiler (Highlight to read)

   

• The update free Windows 10 not resumed after the shutdown of the Pc down. Why?

  I am of the India, I get power outages or network problems normally. I started to download the windows 10 free update, it filled up to 10% (Total 2,936.3 MB in 10%). All of a sudden I faced the power failure and my PC was arrested. After a while, I have on my pc and the update is downloading 0% again. What is the solution of my problem? How take it back? How to continue downloading? If it's only my internet data will be wasted and I will never get free update to windows 10. Please solve my problem.

  https://www.Microsoft.com/en-us/software-download/techbench

  This Web site allows you to download the file to install manually, but the problem is that you must fill it in 24 hours. If you have IDM, you can extend the time limit by a silly workaround, if you want I'll give you that too.

  Answer back for all the questions, hope that helps

  *Bhai Punjab me rehta hai kya?: P