IaaS Service could start after update vCAC 6.0.1

Similar Questions

• The cryptographic services service could start, Windows Update, error

  The basic problem is that I am unable to run Windows Update.
  I get the error,
  "The Windows Update cannot currently check for updates because the service is not running." You may have to restart your computer. »
  The service is running, and I am able to stop it and restart.
  I crossed my event logs and was able to come up with three different mistakes that I think some research are related. I have read several forums including a few on this site that say I need to fix 50202. But I'm unable to locate this hotfix, microsoft has removed all the items that have been linked to him.
  I am running Win 7 64 bit

  ERROR 1

  The Cryptographic Services service failed to initialize the catalog database. The ESENT error is:-583.

  Description:
  The Cryptographic Services service failed to initialize the catalog database. The ESENT error is:-583.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      257
      0

  ERROR 2
  Log name: System
  Source: Service Control Manager
  Date: 07/01/2011 15:26:44

  Event ID: 7023
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: PC-user
  Description:
  The Windows Defender service terminated with the following error:
  % - 1906441657

  ERROR 3
  Log name: System
  Source: Service Control Manager
  Date: 08/01/2011 05:53:11
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: PC-user
  Description:
  The Windows Search service terminated with service specific error %-2147217025.
  The event XML:

  I tried you to repair the catalog database?

  http://TechNet.Microsoft.com/en-us/library/cc734083 (WS.10) .aspx

  I tried to reinstall my system with Windows 7 64-bit recovery discs from the hidden partition on the HARD drive and receive the same mistakes.

   

  Any help would be greatly appreciated.

  Here is the error I get when I run the command:
  C:\Windows\System32>esentutl/p c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1
  \Catdb - 85E5 - 00C04FC295EE}

  Utilities for Microsoft (r) Windows (r) extensible storage engine
  Version 6.1
  Copyright (C) Microsoft Corporation. All rights reserved.

  Error: access to the database from the source "c:\Windows\System32\catroot2\{F750E6C3-38EE-11
  D1-85E5-00C04FC295EE} \catdb' failed with Jet error 1811.

  Log name: Application
  Source: CAPI2
  Date: 08/01/2011 08:16:19
  Event ID: 257
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: PC-user

  I was finally able to resolve this problem.  I found the answer on another forum and it solved my problem as well.

  The error was caused by Intel Rapid Storage Technology technology program that comes with my Toshiba laptop.

  I guess the old driver did not like the new 640 GB hard drive, I installed.  Maybe it was designed only for up to 500 GB (that's the size of my old hard drive which worked well).

  Technology Intel Rapid Storage Technology program was shown in the notifications of the taskbar with a yellow exclamation point.

  As soon as I put to update this driver at latest on the Intel site, Windows Update and everything worked.

  Hope this helps anyone else having the same problem

  P thanks to Bear for all your help.

  Glenn

• InDesign fails to start after update (on Win7). Any ideas?

  InDesign fails to start after update (on Win7). Any ideas?

  I reinstalled InDesign and also restarted creative Cloud App.

  Had to happen at a crucial time in date limit!

  Help :-) gratefully received

  The program does not start and immediately gives the error "Indesign stopped working and needs to close."

  In the end I contacted support and they had to fix the program.

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• ColdFusion service does not start after update 12

  Hello

  I'm running CF10 on Windows 2008 R2 server.

  Today I applied the update patch 12 to my server Coldfusion10 installation and now 10 Coldfusion Application Server does not start.

  After installation I ran configuration of the Web server, such as recommended. Now, when I start from server manager concole I get an error Windows cannot start Coldfusion 10 application server...

  When I start the Coldfusion Administrator I get page with:

  Service temporary unavailable!

  The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later.

  Jakarta/ISAPI/isapi_redirector/1.2.32)

  I downloaded the patch directly from this http://helpx.adobe.com/coldfusion/kb/coldfusion-10-update-12.html page after update running administrator and download failed several times.

  I restarted the server box, but it did not help.

  Any ideas?

  Thank you

  CF10 reinstalled, now works

• every night does not start after update

  Win 7 x 64
  42.0A1 every night
  Does not start in normal or safe mode after update. Tried - safe-mode and shift method.

  Last crash Crash ID ID: bp-2bd17147-3a07-458b-9c89-4a37e2150718 doesn't mean anything to me.

  I can't put up with these accidents more. I worked on it for over 2 hours today.

  Please, someone help quickly.

  Hi rob86, every night is an early pre-release version where instabilities are expected. If you want to have a more stable environment, please use another channel: https://www.mozilla.org/firefox/channel/#firefox

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• XP does not start after update BIOS on Satellite L

  I've just updated my BIOS 2.10 to 2.20 to try to overcome a problem of overheating with Linux.
  The reboot of the XP laptop will not start. I get the XP screen for a few seconds and then the blue screen of death flashes until restarting the laptop before. The blue screen is so fast, that it's not finished writing the text - I can't see all the numbers to check the error.

  If I choose Linux Mint of my GRUB screen, the laptop starts properly. I also see the Windows partitions. I tried to boot from a XP disc to run CHKDSK, but I go to the step where it says it inspects the configuration of my then hangs on a black screen / white and there it is.

  Any ideas? Is it possible to roll back the BIOS?

  Hello

  > Is it possible to roll back the BIOS?

  Yes, you can downgrade (rollback) If you made a backup.

  Can enter you the Bios and check if the compatible mode (after updating the Bios, it might put AHCI default)?

• computer does not start after update

  what computer starts without updates without problems.
  When the computer starts after a update it does not start and goes into the Startup Repair. after repair, I check: diagnosis and repair of the details:
  the root cause of watch - start criticalfile c:\ntoskrnl.exe is corrupt. with a 0xa error code

  can I fix it myself?

  horticulturist,
  Did you run the System File Checker?  If so, what were the results?  If you haven't done so already, you will need to run (sfc/scannow) so that it can check your system files for all questions.  Also this happens after any update is installed, or only the current links that are pending?  I suggest try to install an update at a time and see if you are able to get the updates installed or not.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photoshop CC 2015 does not start after update

  After update from yesterday, I get the error message "the operation could not be completed" when I try to run Photoshop.

  Any ideas?

  Thanks, Dirk

  Jitendra Hello,

  Thanks for these suggestions, but they don't work - however, I found a discussion, which seemed to have solved the problem or at least found the source of the problem. For your information, it's here: Photoshop CC 2015 do not launch after update

  Kind regards

  Dirk

• Windows did not start after update of the Service Park 2

  Update Windows Installer service Park 2 but my system could not start. I do restor system but cannot start windows.

  There is a free Microsoft support when it comes to updates:

  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetyupdatesnotinstalled&task=country&St=1&wfxredirect=1

• Windows does not start after update

  Stop PC last night and let it install 3 critical updates at shutdown. On the PC this morning, it won't start. Repair of the system indicates it cannot automatically repair...

  Restores the auto system restore point before the decommissioning, and it now boots normally...

  Then, Mr. Gates, who, following updates kills my PC? :::

  Update security for Windows 7 (KB2419640)

  Download size: 857 kb

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=204803

  Help and Support:
  http://support.Microsoft.com

  Update for Windows 7 (KB2454826)

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  This is a reliability update. Install this update to enable a set of performance and features updated graphics, Media Foundation and the XPS components on Windows 7 systems.  After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/2454826

  Help and Support:
  http://support.Microsoft.com

  Update for Windows 7 (KB976902)

  Download size: 4. 3 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to enable future updates to install successfully on all editions of Windows 7 or Windows Server 2008 R2. This update may be required before you can install the selected future updates. After you have installed this item, it cannot be deleted.

  More information:
  http://support.Microsoft.com/kb/976902

  Help and Support:
  http://support.Microsoft.com

  Windows malicious software removal tool - January 2011 (KB890830)

  Download size: 999 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  After the download, this tool runs once to search your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and remove infections found. If an infection is detected, the tool displays a status report the next time that you start your computer. A new version of the tool will be offered each month. If you want to manually run the tool on your computer, you can download a copy from Microsoft Download Center, or you can run a version online from microsoft.com. This tool is not a replacement for an antivirus product. To help protect your computer, you must use an antivirus product.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=39987

  Help and Support:
  http://support.Microsoft.com

  This thread seems to describe the problem you are experiencing:

  Windows 7 - KB2454826 fails and only recover after reboot

• Vista will not start after update 09/12/2009.

  After you install the updates available for me on December 9, 2009, Windows Update wanted the computer to restart to complete the installation. I made and went on my merry way. A while later, I rebooted the computer, but the screen resolution was twisted, is no longer big screen, had compressed air and had a strange grid points, and after the progress bar Windows Vista, the screen remains black - the Welcome screen never showed up.

  Kick system repair CD, found 'a fix will prevent' and system restore suggested. Subsequently, attempted to start Vista, but got the same result as before. Tried the CD to repair a few times more and always suggested the same thing, leading me to believe it was not actually the application of the system restore.

  Vista is able to boot in safe mode and safe mode with networking and attempted a restoration of the system from there to just before the patch, the night before (a prior restore point updates 12/8) and a point 12/5. In all cases restarted to complete the restoration and then rebooted to see if it worked - never did. Whenever I went to the system restore, it doesn't seem like it had restored any point...

  Attempted to launch Windows Update in safe mode, but nothing happened. Went to the windows update website to see if I could get the ActiveX update, but he comes to propose I have run Windows Update from my computer (nice), with no 'help' link or other way to declare that it did not work.

  Went into Add/Remove programs to see if there was an installable patch listed, but it does not list something beyond mid-November.

  Help. =[

  Run the System File Checker (the command is SFC/scannow) from the command prompt.  Also check that your system has all virus\malware.  Here is a link to a thread with some good information: get rid of malware

  You can also run a disk error check as well.    Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XP does not start after update

  I bought two Fujisu systems used with 2.8, 512 and 40 GB. I installed xp sp3. He was successful but when I update my two computers do not start. When the "xp" logo come from. It restarts. Please help me how to solve the problem and why this happens.

  CrystalBall © SEZ...

  Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"
  http://support.Microsoft.com/kb/953356

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009.  This support will cost you 59 US$ per incident now. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Infinite loop start after updating to Vista Home edition

  I own a lenovo model 8705CTO mini tower PC.

  At the end of July, an automatic update of Vista cannot install properly, which left the starting in a State sequence, appears:

  "Configuring updates: stage 3 of 3-0% complete.

  "Microsoft Vista Home Basic"

  for 10 seconds, then

  "Shutting down".

  for a minute or two

  and restart again in the same loop.
  This loop lasted several hours.

  With the help of:

  "Rescue and Recovery - repair Express."

  the following message is generated:

  "Errors have been detected in the operating system."

  "Click on files" reveals:

  Details

  Status of name
  Bootmgr corrupt

  The bootmgr file has 325 KB

  Apparently, it was generated on 01/18/2008 and contains 333 203 bytes.

  Operating system restore points prior facilities only are not available, since the automatic update has left the system with the restore than identical behavior points.

  How can I recover without having to re - install the operating system from scratch?
  It is advisable to remove the bootmgr file and it re - generate from scratch?
  What is the procedure to achieve this?

  Thanks for your response (s)

  HD

  I have created the disk as described, as the 64-bit version. The standard disc worked and allowed me to use repair tools.
  BTW, these are already shipped with the LENOVO system, and I consulted the tools off during the START-UP phase, then by restarting the PC.

  The answer to the success of the recovery could be found here, after that I tried
  "Configuring updates: stage 3 of 3-0% complete.
  on Google and looking at various web pages:http://support.microsoft.com/default.aspx/kb/949358

  (Restore points were crushed, because automatic updates have been selected, and the computer ran unattended for more than a week by substituting the last point valid restore as update VISTA tried to re - install the updates failed every night)

  Method 3: Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method.

  • Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows.
  • Use this method only after trying other methods.

    Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue.

  • Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available.
  • After using this method, the following conditions may exist until reinstalling Windows:
    • An update is being installed may not be installed correctly.
    • Windows Update may not work correctly.
    • If an update is installed, you may be unable to stop the installation process.
    • You may be unable to enable and disable certain Windows functions in option.
    • Certain optional Windows features may not work correctly.
    • The computer may be in an unprotected state.

  To rename the Pending.xml file, and edit the registry, follow these steps.

  Start Windows Vista and go to system recovery options:

  1. Insert the Windows Vista installation disc in the disc drive, and then restart the computer.
  2. When you are prompted to restart from the disc, press any key.
  3. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next.
  4. On the Install Windows page, click repair your computer.
  5. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next.

  Use the system recovery options to rename the Pending.xml file and modify the registry:

  1. In the System Recovery Options page, click command prompt.
  2. Type cd C:\windows\winsxs, and then press ENTER.
  3. Type ren pending.xml pending.old, and then press ENTER.
  4. Type regedit and press ENTER.
  5. Select HKEY_LOCAL_MACHINE.
  6. On the file menu, click load the hive.
  7. Look for the following folder:
     C:\windows\system32\config\components
  8. When you are prompted for a name, type Offline_Components.
  9. In the registry editor, find and delete the following registry subkey:
     HLKM\Offline Components\AdvancedInstallersNeedResolving
     HKLM\Offline Components\PendingXmlIdentifier

  Exit the registry editor:

  1. At the command prompt, type exit to quit the registry editor.
  2. Press ENTER.
  3. Click restart.