update key

Similar Questions

• Qosmio X 770 loss of function after the Win 10 update key

  Hello. I recently upgraded from Win 7 to win 10 via download, and my function key does nothing. The Eco utility also is all out of wack and does not seem to meet. Don't know how else to describe it, other than that. Appreciate any help.

  Chris

  Best option is to clean, install, chuck all the Toshiba bloat including all the so-called eco and Windows power management stuff to. Trust me it works much better. I was obliged, in a clean installation, after that the SSDS failed recently. Surprisingly, Windows took care of all the drivers on my 870 X and the laptop works perfectly, my only concern is the CPU time that seem too high, maxing out at 90 degrees for the games, but about to take it apart and redo the radiator paste on the CPU/GPU cooler. Time GPU is OK, around 75 degrees max.

  However, the downside for me was some F keys no longer work. WiFi but is now just WiFi/Bluetooth power, speaker volume, microphone, display, and the display brightness all work but the power touchpad is not. Multimedia keys don't seem to work either (play/pause, track skip) only the screen brightness, volume, and multi display keys have a graphic, none of the others don't.

  Toshiba does not support Windows 10 for anything earlier X - 70 has. shameful when you pay a lot for these Qosmios. Don't buy Toshiba again when the X 870 dies, not only I don't think it's a shame to not offer better support on products like the Qosmio series, the X-70 b is now little more than a toy with his R9 M365X AMD, not more powerful than a Geforce 940 M GPU to!

• now that I put to the top of my microsolft account how do I set up my windows anytime update key or nwhere is because I downloaded windows 2003 and need the key to upgrade to windows 7

  I downloaded office 2003 they needed the key to upgrade for windows from my computer to my microsft Office Access and upgrade and treat the new additon of windows. You can help me get the upgrade to windows 7 active so I can use the downloads.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• update of a primary key column

  Hello

  I have a problem I want to expose you for your opinion.

  In a table of the source, I have a primary key consisting of four columns (let's call them A, B, C and D).

  Columns D must be updated with a different value (a Mappin with another table)

  My ODI interface, I set the update keys a, B, C, but of course, it does not work because there is violation of the primary key

  I thought, the first value of D in a new column (D_OLD) and use as a 4th update key.

  What do you think?

  Please suggest me the right way to do it

  Thank you for your return

  Hello

  Maybe I did not understand your problem correctly, but you say that you want to update the value of col D what happens to the part b of your primary key. You cannot update the row using columns A, B and C, because they are not unique. Am I wrong? If this is the case, then how will you identify which line you want to update the value of col D for. Tell if you have 2 lines with the same value for columns A, B and C, and a different value of D so how do you know which line you want to update? If you have the answer to this question, then you should be able to update as well.

  Thank you

  Ajay

• Toshiba Satelite a300 Windows 7 32 bit problem with music keys

  Hi, I just installed Windows 7 (32 bit) and I have a problem with the music keys. I can't find driver for it even on the toshiba official site. I had been looking in this and many other forums, but no answers have been good enough to solve my problem. "I've been to the installation of several ' for sure the work drivers" and nothing. It is with my Web camera - no driver. After I installed my touchpad began to be brighten up, but I still can't use the music BIOS update keys. I hope someone can help. Please :)

  Sorry for my English

  Install the Toshiba value added for the A300 (use the PVAT Win7, not the PVAT Vista).

  This site of Toshiba: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

• Could not get the updates of Windows for Windows 7

  I'm running Windows 7, Home Premium edition, 64-bit and using IE 11.  Windows Update stop working, so after trying all the fixes recommended, I reinstalled Windows 7 thinking that would solve the problem.  Once more, Windows Update just works for 8 hours and still running.  I also tried to update to Windows Defender and it was still running 8 hours later.

  I looked in the registry editor and Windows Update keys aren't there.

  Please help, or I can go crazy.

  Install the rollup of convenience. The value of the automatic updates to "never check for updates" and then restart. Install (prerequisite) KB3020369:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46817

  Cumulative convenience:

  http://download.windowsupdate.com/d/msdownload/update/software/UPDT/2016/05/Windows6.1-kb3125574-v4-x64_2dafb1d203c8964239af3048b5dd4b1264cd93b9.MSU

  It takes two more facilities manual for windows update to work:

  KB3145739

  KB3161664

  In case the question returns next month, it is nothing to worry about. Microsoft keeps brings updates that the client cannot handle. We will keep you updated.

  Best regards, VZ

• I can't activate windows license key 7

  I can't activate windows 7 Professional. I installed windows 7 Home premium and upgraded to windows 7 Professional. Now, I get a message saying that my license key of windows is not original. When I try to enter the Professional license key, it is said that the key is not valid, because it is only an update key. When I enter the key for Home premium, it indicates that the key will not work because I installed windows 7 Professional. What can I do in this case?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Star wars the old Republic updates a day blocked

  Hello this is a week that I downloaded star wars the old Republic (I was a former player a subscription and left the game in the passage of the free play too) and installed all going well until the but arrived has update (key resources 1 exactly) it blocks on the % and the number of the % change all the time it can be like 0 17 as 39 etc... After having tried miles and a solution with technical service I decided to start option "troubleshoot compatibility"(dans les options de d'un clique droit sur le launcher.exe) and it tells me "incompatible programs" so I want to know if the problem is not my version of windows 7 (I was already in 7 as I played the first game) I'm desperate to tell me that I could never play again ". I looking forward to your answers.

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Hello

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  
  http://support.Microsoft.com/common/international.aspx

• Can't use the product key to activate Windows 8

  Original title :-2147023450

  Because my new phone Samsung (which has been activated online) does not have a product key Windows 8 I download Belarc, which shows the product key.

  I used this product to update key.  Microsoft has refused to acknowledge this product key.

  This key cannot be used to activate Windows 8. In addition, your new laptop Samsung if it came preloaded with Windows 8 should already be enabled. The only thing you had to do was to connect to the Internet and it would activate automatically.

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

  If you have problems activating, try to do a Reset and attempt to activate again:

  You have two options:

  If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.

  To do this, follow these steps:

  · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · In virtue remove all and reinstall Windows, click Start

  Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

• difference between the incremental update of the IKM oracle and incremental update IKM oracle (PL - SQL)

  Hello

  What is the difference between the incremental update of the IKM oracle and updated incremental IKM oracle (PL - SQL) and incremental update IKM oracle (line by line).

  Thank you

  Papai

  The only difference is that the second using plsql for incremental update. He also to manage clob issues well enough.

  If you need to know more you can read the description of each KM section.

  Incremental update IKM Oracle (PL-SQL)

  -------

  Description:

  -Knowledge integration module

  -Integrates data into an Oracle table from target in incremental update mode using PL/SQL.

  -Non-existent rows are inserted. already existing lines are updated.

  -Data can be controlled. Data invalid are isolated in the error Table and can be recycled.

  -This KM uses PL/SQL to perform the inserts and updates until and blob columns are supported. Please see the restrictions.

  -When you use this module with a source table logged, it is possible to synchronize the deletions.

  Restrictions:

  -When working with the logged data, if the "synchronize destruction of the newspaper" are executed, the lines deleted on the target are engaged

  -The data are updated even if not changed (upgrade from any (e)

  -The number of lines (number of inserts/changes) is not available because the transactions are performed using PL/SQL

  -Comparison of the data is performed using the key to update defined in the interface. It must be set.

  -L'option TRUNCATE does not work if the target table is referenced by another table (foreign key)

  -Options FLOW_CONTROL, and STATIC_CONTROL call the Module knowledge check to isolate invalid data (if no CKM is defined, an error occurs). These two options should be set to NO in the case where an integration Interface meets a TEMPORARY target data store.

  -L' FLOW_TABLE_OPTION option is set by default to NOLOGGING. Set it to a space if the interface is running on an Oracle 7 database

  -Deletions are committed regardless of the VALIDATION option

  Incremental update of the IKM Oracle

  -------------

  DESCRIPTION:

  -Integrates data into an Oracle table from target in incremental update mode.

  -Non-existent rows are inserted. already existing lines are updated.

  -Data can be controlled. Data invalid are isolated in the error Table and can be recycled.

  -When you use this module with a source table logged, it is possible to synchronize the deletions.

  REQUIREMENTS:

  -The update key defined in the interface is required.

  RESTRICTIONS:

  -When working with the logged data, if the "synchronize destruction of the newspaper" are executed, the lines deleted on the target are engaged

  -L'option TRUNCATE does not work if the target table is referenced by another table (foreign key)

  -Options FLOW_CONTROL, and STATIC_CONTROL call the Module knowledge check to isolate invalid data (if no CKM is defined, an error occurs).

  These two options should be set to NO in the case where an integration Interface meets a TEMPORARY target data store.

  -L' FLOW_TABLE_OPTION option is set by default to NOLOGGING. Set it to a space if the interface is running on an Oracle 7 database

  -Deletions are committed regardless of the VALIDATION option

  -L' ANALYZE_TARGET option will allow to assess correct statistics only if the VALIDATION is set to Yes. Otherwise, the IKM gather statistics based on old data.

  -Default UPDATE option is TRUE, which means by default it is assumed that there is at least one column nonkey specified in a target data store.

• Acrobat 8 update: can't find / download AcrobatUpd810_efgj_incr.msp

  I don't understand how Acrobat 8, with known problems to auto-update, can be easily updated manually.

  I've downloaded several incremental backups, 8.1.1 8.1.2 > > 8.1.3, but 8.1.0 is not found!

  Adobe - search: acrobat % 208% 2E1% 2E0

  Extremely frustrating, more as each update has its own download page, please consolidate them into a single page for all 8.x updates.

  Can anyone confirm this 8.1.0 download is legitimate? He seems to get on Adobe.com, but why should I take a chance?

  http://www.softwarepatch.com/graphics/Acrobat-8-Professional.html

  Having to go through a 3rd party Web site for an update key blows my mind.

  Please improve this process.

  Find the resource in another post:

  FTP://FTP.Adobe.com/pub/Adobe/Acrobat/win/8.x/

  This should be front and Center on Adobe.com, relying on a forum for this basic information is always a failure.

• Problem of incremental update in the treatment of updates

  Hi all

  I use ODI 11.1.1 and IKM Oracle incremental update. I have the following problem:

  My target table contains the following keys: NAME EVENT_ID, location_id and following columns, VALUE

  And assume that my source table that contains the same columns and a TIME column.

  If the source table is as follows:

  EVENT_ID LOCATION_ID NAME TIME VALUE

  1                1                   T         1          1

  1                1                   T         2          2

  If these two lines are loaded into the staging table I$ at the same time and the target table does not contain already the (1,1) combination for event_id, location_id 2 new lines will be inserted into the fact table. I would not have only one line with the most recent value. The problem is that step 'make update' will never report the second row as 'U' because there is no such thing as the combined update key in the fact table.

  How can I get the desired behavior?

  Hello

  There are several ways to do so. It depends mainly on your cardinality.

  APPROACH 1 (VERY BAD): filter

  • Place a filter with this text
    • EVENT_ID | LOCATION_ID | TIME IN (SELECT EVENT_ID |) LOCATION_ID | MAX (TIME) FROM TABLE GROUP BY EVENT_ID, LOCATION_ID)

  APPROACH 2: make a subselect interface

  1. create a temporary with interface
     • EVENT_ID = EVENT_ID
     • LOCATION_ID = LOCATION_ID
     • TIME = MAX (TIME)
  2. then put this interface (yellow) in your source and mark as subselect
  3. make an inner join

  METHOD 3: VIEW

  1. give an opinion on your db
     • create view MYVIEW AS SELECT EVENT_ID, location_id, MAX (TIME) FROM TABLE GROUP BY EVENT_ID location_id
  2. reversing the trend
  3. inner join

  APPROACH 4: FUNCTION ANALYTICS (good)

  Use an analytic function. See for example Re: 2nd Max Sal. But what will little customization.

  However, a variable is not a solution.

  Let us know

• 'KEY' box grayed out

  Hi Experts,
  
  I did it with my ODI mappings.
  By default in this mapping, ODI made 'The header ID' column as the primary KEY.
  
  However, the combination of the column 'Header ID' and 'NUMBER of LINE' is a KEY.
  
  Can't activate the checkbox as a KEY for "LINE NUMBER" as well.
  ODI has grayed out in this field. Infact, for all other columns.
  
  For this reason, the query that generates the ODI is not giving the unique records and therefore do not.
  
  Any work around that? or how to activate the KEY field?
  
  Any suggestions would be a great help.
  
  Thank you very much
  Shyam

  When you click on your name of target data store, a 'update key' is specified?
  If so, it is normal that the key field is grey. "Update key", select not "defined". Then you will be able to activate the key field.

  You can also change the primary key in your data store, in the view of the model.

• Can we delete a key through update_project API member

  Hello
  
  My requirement is that if the project start date is greater than the system date, then during the update such projects, I remove exsiting key member and add new key members. I'm not able to delete the existing key and also did not find any means / parameter which can be spent in update_project api so that it will remove existing key member. I use project_role_tbl_type to add/update key members.
  
  If anyone has an idea, please share it with me.
  
  Thank you

  No, we don't have a public API for the removal of key members.

• ODI error: no key is declared in your target data store

  Hi all
  
  I'm trying to update a field in a table (MSSQL data) fields in the same table using the incremental IKM MSSQL put up-to-date.
  
  When I try to run the interface the following error occurs:
  
  com.sunopsis.tools.core.exception.SnpsSimpleMessageException: flow control is not possible if no key is declared in your target data store
  
  I chose the 'Key' option on the primary key field in the "target column properties" under the mapping tab in the designer, but when I select the 'update key' in the workflow tab, there is no fields to select.
  What is the difference between these two key configurations in the designer? Why the ODI is not recognizing the key specified on the target?
  
  Thanks in advance

  Hello

  You must create a PK by adding the constraint in your target "Data bank" (go to models-> your data store target-> expand it, right-click on the constraints-> new key and select your PK on the columns tab). Then, you can see the PK in the drop of the update key.

  In addition, FLOW_CONTROL should be enabled if you need to dispose of "error capture" mechanism (E$) etc., if not you can set to false.

  Thank you
  Guru