Update MSXML caused the failure of Quickbooks, why?

Similar Questions

• Is windows update causes the failure of the system?

  I have windows XPsp2 and I've updated with XPsp3 and it takes place in a few errors and the failure of the system to my PC. Unlike my aunts PC she XPsp1 with a slow internet connection so she was not able to update, but it works for more than a year. then the causes updated a few problems in the future?

  No, do not keep your computer fully patched all the time causes more problems.

  4 steps to protect your computer
  http://www.Microsoft.com/security/pypc.aspx

  NB: If WinXP SP3 is not installed by April 12, 2010, your computer WinXP SP2 will not be offered as all other reviews of security updates and the Windows Update Web site will not be available.er

  The above has applied to WinXP SP1 computer your aunt since October 2006.

  For you and your aunt...

  HOW to get a computer WinXP SP1 or SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• Printer HP Laserjet installed - choose Properties causes the failure of protection

  Using Vista with a N 3500 HP color laserjet.  Worked fine for almost a year.  Then after an update of Windows - choose change properties in the printer driver causes a protection fault.  Cannot change the type of paper, hand feeding, color, copies etc.  Removed from the printer.  The most recent driver reinstalled on HP site.  The same problem.  Tried to change properties of Run as administrator, the printer properties, but most of the options are grayed out.  Saw a blog about the bad update HP printers, but can't find the article.

  Appreciate any help.

  Hi JRobinson1234,

  Please indicate the full error you receive, to better understand the issue.

  You can try the following steps:

  Step 1: Run the Fixit available in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  Check whether the problem is resolved

   

  Step 2: Make sure that the printer is set as default.

  1. on the Windows taskbar, click the Start button, select Control Panel, and then click Printers. The Printers folder opens.

  2. look for a green check mark next to your printer. This check box indicates which product is the default printer for Windows.

   

  Step 3:  You can follow the steps mentioned in the link below

  Why can't I change the printer properties?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-change-the-printer-properties

  You can check with HP to known problems

  http://welcome.HP.com/country/us/en/contact_us.html

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When Firefox crashes and restart is necessary, Firefox always try to open the same tabs that caused the failure before.

  I use tabbed browsing all the time. When I open a tab of a Web site that poses a problem, freezing Firefox (but not the computer), I find that I can delete the Firefox problem only by restarting the computer. I am so appalled to find that Firefox then tries to recreate the same set of tabs that caused the problem in the first place, causing Firefox freeze again. Usually I can get it out by closing Firefox and very long wait for Firefox to close completely so that it can be restarted again.

  This problem occurs in version 4.0 as well as in the latest version of 3 that I had. I remember that in some versions previous Firefox asks if you want to recreate your tabs or open in a new browser window. I always took the second option. This choice is no longer makes its appearance.

  Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about: config to get page the on: sessionrestore page immediately with the first reboot after a failure has occurred or the Task Manager was used for the closing of Firefox.

  Which allows to deselect the tabs that you do not want to reopen, but will reopen the other tabs.
  
  See:

  • http://KB.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• Updating JRE after the failure of sysprep

  Hello

  During our deployment of windows 7, we have problems with JRE 7. We can install and update with no problems before sysprep. But after sysprep when a user tries to update it fails with "interrupted installation". We have set up installation logging and found MSI error 1603, with a reference to CustomAction InstallJava. As stated in the newspaper here:

  MSI (s) (0C: 04) [09:55:16:706]: the LastUsedSource value: C:\Users\USERNAME\AppData\LocalLow\Sun\Java\jre1.7.0_45\.

  MSI (s) (0C: 04) [09:55:16:706]: value LastUsedType: n.

  MSI (s) (0C: 04) [09:55:16:706]: A LastUsedIndex: 1.

  MSI (s) (0C: 04) [09:55:16:706]: op of execution: ActionStart (name = InstallJava, Description = registration of Java Runtime Environment),

  Action 09:55:16: InstallJava. Registration of Java Runtime Environment

  MSI (s) (0C: 04) [09:55:16:706]: op of execution: CustomActionSchedule(Action=InstallJava,ActionType=3073,Source=BinaryData,Target=MSIInstallJRE,)

  MSI (s) (0C: F8) [09:55:16:722]: call for a custom action to distance. DLL: C:\Windows\Installer\MSI31AC.tmp, point of entry: MSIInstallJRE

  MSI (s) (0C: 78) [09:55:16:722]: generation random cookie.

  MSI (s) (0C: 78) [09:55:16:738]: created server custom with PID 2180 (0 x 884) Action.

  MSI (s) (0C: 58) [09:55:16:987]: running as a service.

  MSI (s) (0C: 58) [09:55:16:987]: Hello, I am your server custom action high 32 bits.

  CustomAction InstallJava returned error code 1603 (note this is perhaps not 100% accurate if translation happened inside the bin to sand)

  Action ended at 09:55:52: InstallFinalize. Return value 3.

  Any1 have experience with a situation like this?

  We found the problem!

  Our anti-virus program, Symantec Endpoint Protection, apparently had a parameter definition called:

  "To prevent the registration of new Browser Helper Objects (HIPS) [AC15]" that was causing the problem.

  We have disabled this and the problem disappeared completely.

  --

  Kemicaze

• Update kb948465 caused the error 80070490 error code

  KB948465 low load failed in sept 09, no down load came in the sence, checked several times and tried to get them, nothing. I finally found this site.

  http://support.Microsoft.com/kb/958044

  You receive a ""0 x 80070490 "error code when you use the Windows Update site or Microsoft Update Web to install updates"

  If the information above does not resolve the problem:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Update of 31.3 lists caused the failure.

  My mailing lists have been works well until the update of this car. A work around for previous incidents of this problem, which a name without spaces list, has not worked this time. Only by selecting all addresses from the list and dragging them to the line address works.

  Can you please restore the function of mailing list?

  Thank you
  ... Alan

  No, not back... you have a problem, but it is clearly not the same.

  I am not able to reproduce an error on a daily build, then perhaps you could try to restart with the modules disabled in the Help menu to see if it is an aberrant add-on cause you pain.

• Pavilion G6 - 1061ee BIOS update error causing the extreme fan noise

  Hello

  It been a while since that HP has completed a new update of the BIOS for my Pavilion G6-1061ee, I got v f.63.

  But now, they have made a new update of BIOS that is v f.65 I downloaded the file (the insydeFlash BIOS update) and when I run it and press START, my system freeze suddenly and EXTREMELY increase fan noise, it's like my CPU usage is 300% then in a few moments, the system shuts down and I could not be able to turn on the computer again , So I had to unplug the AC adapter and remove the battery then return everything back to be able to turn it on.

  So can anyone help me with this problem.

  OS: 8 64-bit Windows

  RAM: 8 GB (Original was 4 GB... And added another 4 GB)

  CPU: Intel (r) Core i5 CPU M480

  GPU: Radeon HD 6470 M with Intel HD 3400 grapchics

  - And thank you

  Kind regards
  Pedro Marthon

  Hello PedroMarthon.

  Are you currently overclocking the graphics card?

  In order to solve this problem, I think you should uninstall third-party drivers and use the official drivers for Windows 7 and the workaround posted by my peers.  The reason I suggest, is that the use of third-party drivers could cause strange problems and it will be easier to solve the problem.

  What I would say is remove the third-party drivers and then using the method posted in my response above.  Once the process is complete, I would try and then update the BIOS again.  If successful, you can remove Windows 7 drivers and again use your third-party drivers.  However, I'm not against the use of third-party drivers.

  I appreciated the way in which you have been given to work with me, so I went to come your messages of congratulations.  If you think that I was helpful please click the White Star under my name to give my messages of congratulations.  I would really appreciate it!

  I will keep an eye out for your next answer.  I wish you a nice day!

• update computer caused the loss of HP webcam (fixed) video camera just keeps loading

  This same problem has been resolved about 1 week ago by the community, but since Microsoft is updated and it loads just continually once more. I tried the latest patch which has been uninstall driver and reboot, but even if I tired it a few time it doesn't fix it this time ideas?

  Given that the same drivers buggy being reported by the operating system, try to update your drivers for the generic "device drivers video USB" that come with the operating system (as shown below) and see if that makes a difference.

  

• Satellite L750D - update BIOS causing the CD Player problems

  I have a L750D-1GC Satellite running Windows 7. Recently I updated the BIOS to 1.60 04/05/12 THIS worm 1.40

  I noticed that since that more that I have problems my CD player in what I can read CD/DVD but does not burn. Using burning software, it appears the combustion happens (rotation of the disk and green light), but at the end it breaks down. I have tried several Microsoft Fixit program but the problem persists, help?

  I put t think that the BIOS update would impact on the functionality of CD/DVD drive.
  Usually, the firmware of the CD/DVD drive contains information about the compatible media and I put t that any link between this question and the previous update of the BIOS.

  For me is looks like the laser lens is dirty or the lens may not be properly calibrated to read/write from the disk
  Try to clean the laser lens with cotton wool trick and liquid alcohol in many cases this would set similar question and the player couldn't handle the media properly.

• Download of update KB982312 causes the error code 646

  Hello

  COULD SOMEBODY PL HELP ME TO INSTALL THESE UPDATES. FRUSTRATED TRYING TO DOWNLOAD THEM. SOME ARE NOT DOWNLOAD ARE KB982308, KB979441 KB982158, KB982135, KB982312, KB982331. WHEN I TRY TO DOWNLOAD IT, THEY SEEM TO DOWNLOAD IT UNTIL THE KB982312. FOR SOME REASON, HE IS UNABLE TO DOWNLOAD IT WHICH SEEMS TO HANG ALL THE OTHER MENTIONED DOWNLOADS. NEXT, I GET AN ERROR 646 COD.

  PL HELP

  Thank you

  ED

  * original title PROBLEMS DOWNLOADING THESE updates *.

  Double post:

  If you experience problems with the Office updates, try to manually download the same and install.
  You can search the individual updates here:
  http://www.Microsoft.com/downloads/en/default.aspx

  He just put in the KB number and then perform a search.

  If this still creates a problem, then try to disable User Account Control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  Vista: http://windows.microsoft.com/en-AU/windows-vista/Turn-User-Account-Control-on-or-off

  or disconnect from the internet and try the update again.

  TaurArian [MVP] 2005-2010 - Update Services

• Any virus causes the failure of HARD drive at phyiscal aspects?

  I just bought a Seagate HDD on May 12, 2012 and an audit using HD tour pro without any problem and work well, after a few weeks, I have download SeaTools website Seagate and check, then find Self Test fail, after test HARD drive using long-term credits, which take a lot of time and hang in the middle of the process so I get no choice but restart XP and check again, after a few tries, I hear a few click, click the HARD disk and not be able to start even through I restore XP using Ghost.  I have no idea on what to do HARD physical disk fail?

  Someone there suggestions if unable to complete the Long generic will cause any physical damage on the HARD disk or not?

  Thanks in advance for your suggestions

  Hello

  I already have my suggestion...

  SeaTools tells you that the drive is defective, so it's probably and you have reasons to return it for a free replacement within the warranty period. You can check it on the site of Seagate...

  http://support.Seagate.com/customer/en-us/warranty_validation.jsp?form=0

  Tricky

• Can't download XP security update KB2676562; get the error Code: 0x8007054F - why?

  5 attempts have all failed; error code not defined in the list of available

  Hello

  I suggest you try the methods mentioned below and check if it helps:

  Method 1:

  Offline installation

  Download and save the Setup on your desktop package and try to install the same.

  Download the update from the link below:

  Update security for Windows XP (KB2296011)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=912A7C20-8177-4F65-B986-43FCA6375EC1&displaylang=en

   

  Method 2:

  Follow the steps listed in the following article to resolve the problem:

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Hope this information is useful.

• Print PDF caused the failure of the print spooler

  I have been all over these blogs, and nobody has the answer. I had no problem and then today when I tried to print a pdf file, everything went haywire. I can not print, I can't remove and reinstall my printer, I can't restart the print spooler (it tries but stops, and then said: he started, but he didn't). HELP ME, PLEASE.
  Janie

  Hello jrino,

  Thank you for using the Microsoft answers Forum

  Apart from the pdf printing problem can you print other programs such as Word, Notepad, or Wordpad? Try to go to the event viewer and see what errors are being given in the viewer list. Also during activation of the print spooler service, make sure that the spooler depends on all the services are started as well.

  Access Event Viewer: right click on computer and select manage. Click event viewer, and then expand the view so that you can access the different categories. Expand Windows logs, and then click Application. Scroll down and see what kind of errors you found and see if that helps you evil pulls on the question. Post what you find in this thread.

  Looking for services that depend on: click console in the management of the computer Services. Click Services and Applications and then click Services. Find the print spooler and double-click to view the properties. Watch dependent services for the spoooler and to ensure that these services are started and running as well. If one or more of the dependent services do not work this may cause your spooler to stop working as well.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.