Update of Questions / Help

Similar Questions

• Have to restore the ipod after downloading the update. Question, help please

  Hello!

  I have a large music library on my iTunes and so all my music does not fit on my iPod Classic 160 GB, which is fine.

  I have the latest version (last one that came out) the iPod Classic 160 gb.

  I have the latest version of iTunes.

  I use Windows 7.

  So basically I had no questions for recent years until last week.

  For a long time, I went through my collection of music [in view of SONGS] and placed check marks next to all the songs I want on my ipod.

  It's the way I like it. I have enough free space on my ipod for new music, I get every month so that it works.

  I connect the iPod to iTunes and SYNC my library, and it adds new songs I added to my iTunes library since I'm finally connected.

  Okay - here is the problem.

  Last week, when I connected my iPod Classic to iTunes, I got a saying there was an update to download.

  I am used to what is going on all the time with my iPhone, but I can't remember the last time there was an update for my iPod.

  Intrigued and not think what awkward or troublesome would come from him, I'm agree to download and install the new update.

  When he did download it says that it does not recognize the device (iPod). After searching for hours for help, I finally disconnected, stop, restart and rec-connected my iPod to iTunes.

  He says that he has no music on my iPod. I checked and it was not. He disappeared. ***!?!

  Fortunately, all my music was always in iTunes so I went with my library SYNC (again, I have the titles I want selected already). He said he could only and basically the only option was to reset my iPod to its factory settings. Because the way that my iPod is empty anyway, I thought, fine, so I did. I have restored its original settings.

  Later, I did the same thing after disconnecting. Shut down, restart, clean the cache and the registry, etc and then reconnected the iPod to iTunes. My first thought was maybe I should try to download the update again - since the ipod is empty at this time - what the *, why not - I would rather finish now than get my music on my iPod to be prompted to download new update, and start all over. So I clicked Check For Updates when my iPod was connected to iTunes and it said there is no new update. I don't remember the exact update, but I'm sure it was like 2.05 something, and what I have now (and had before all this happened) was 2.04 or something like that. So does well, no update? No matter what. At this point, I'm SO frustrated - I want just to SYNC my library via checked/selected songs and get back them on my iPod.

  When I went to SYNC, nothing happened.

  So I went to the tab that showed the music and it only gives me the option to SYNC my library of ENSEMBLE music (which is too large and does not fit on my iPod) - OR - I can go through this form on this page and browse and select the ARTISTS that I would like to add.

  It's so frustrating. First of all, I don't want to pass by and re - select all the songs I want to add - the main reason being - he did already - when you click on my library and select the songs view, you can see all the songs that I previously have selected/checked remains unchanged. Second, if I had to do it the way he wants me to all simply by selecting ARTISTS who will not work.

  Sorry for this long crazy question - but basically - how now factory - reset iPod Classic for SYNCING with my iTunes library with the songs of checked/selected, I already have checked - and not to go through and do it by limiting my will and have to select only the artist (not to mention that I did as I want).

  I appreciate any help or insight that someone could offer.

  Much appreciated!

  On the settings screen of the iPod summary (what you see in iTunes when you select iPod), there is a checkbox to Sync only checked songs and videos (wording may be different for your iPod).  Enable (check) this setting in combination with sync entire music library.

• Windows Vista will be preform no updates anyone can help, thank you

  Windows Vista will be preform no updates anyone can help, thank you

  Hello

  1. what happens when you try to run Windows Update? You get an error message? If Yes, what is the exact full error message?

  2. you have made no changes to the computer before the broadcast took place?

  3. is the specific question of an update?

  Method 1:

  Run Windows Update Reset (aggressive mode):

  http://support.Microsoft.com/kb/971058

  Now, restart the computer and check the update.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Download the update system analysis tool version of operating system and control accordingly.

  http://support.Microsoft.com/kb/947821

  How to check the updates failed:

  If you access windows update by clicking the Start button to in address bar type windows update and click on enter, click on updates of the review, and it will show you what that is either installed or not updated.

  If the problem remains even in collect and send the Windows Update log.

   

  Follow the below article to collect the log file:

   

  http://support.Microsoft.com/kb/902093

  Use SkyDrive download collected files and post screen/image capture

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

  Hope the above information is helpful.

• What are Service Packs? Can I upgrade to Service Pack 2 for free? If yes how? If I update it will help or hinder my system? Any pack is better than another?

  Windows Vista Service Pack (basic information)

  Hello

  I know this may seem a simple/stupid question, but I do not understand what are "Service Packs".  I don't know much about computers.

  I have restored my laptop to the factory setting today and I reinstall my programs again.  I am trying to install a new program as well (Autodesk Inventor 2012).  The installation says I can't because I need Service Pack 2 and I only have Microsoft Vista Home Premium (Version: 6.0.6001 Service Pack 1 Build 6001).

  What are Service Packs?  Can I upgrade to Service Pack 2 for free?  If yes how?  If I update it will help or hinder my system?  Any pack is better than another?

  Thanks for the information and assistance that you can give.

  AstoriaBoro

  You can install Service Pack 2 very simply - go to Windows Update and check for new updates - then install all available updates.

  Once they are complete, return again (after a reboot) and do the same thing - repeat until there are no left.

  Along the way you will be installed Service pack 2 :)

• Popup declared attempt to access Firefox; clocked to 'block '. now can not access ALL Web sites; update did not help; What's wrong??

  Reported popup web site tries to access Firefox (don't remember exact message); available buttons: allow once, allow, block; has chosen the block (I selected allow once before, but that seemed to be a bad idea). After that, I get "Unable to connect" no matter where I go. You had to use IE to join of Mozilla.org. Firefox update did not help. Troubleshooting procedure did not help.

  Hello, this looks like a problem with your security/firewall software blocking the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• Cannot change attributes read-only files, by updating the drivers help Driver Whiz from HP.

  Original title: change file attributes

  I'm updating some drivers help Driver Whiz from HP.  The new drivers download but will not be installed.  Apparently, I need to remove the read-only file attributes, but no matter what I do it continues to change the next time I have access to the file to read-only.  Any ideas?

  Hi keuller,

  You can read the following article and check if it helps:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

  Hope this information is useful.

• How to download the update of Captivate (no ' Update' in the Help menu.)

  

  I want to update my Captivate, but there is no "update" in my help menu.

  According to the documentation, I click on "update" and I download the file.  But I don't see "update" in my help menu. (See the illustration).

  Install Adobe Application Manager from here and run it to check the updates. It must indicate the update available in Captivate. You can install it from there.

  Adobe - Adobe Application Manager: for Windows

  You can also download the patch here as well.

  Adobe - Adobe Captivate Support Center: downloads

  Anthony

• First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please

  First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please!

  Hi RC,.

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  Looks like you have somehow the mac version.

  Download the updated windows 6.7 camera raw from this link:

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• How content update answered questions beyond a day ago?

  trying to update a question but don't know where to see old messages?

  I found the discussions.  @

• Why can't that download updates tab in help in Windows cs6 64bits

  Why can't that download updates tab in help in Windows cs6 64bits

  Hi Jeff,

  Everything is Ok now Sever is down I think. I've now updated.  For more information CS6 camera raw using windows 7 64 bit it says my firewall was to blame (b-l s... t)

  Thank you for your interest in my problem

  Kind regards

  Mayo

• Cannot update PSE11! The update under the Help menu option is disabled!

  The update under the Help menu option is disabled!

  My Adobe Application Manager does not display the items on the list. I try to check the updates it and the program says there is no update, and I positively know are updates that I am using camera Raw 7.1.0.354.

  What can I do?

  I am running windows 8 pro with media center and my location is Spanish.

  After a bit of trial and error, I managed to update the software by running as an administrator. This enabled the "Update" feature in the Help menu and everything went smoothly. It is strange, however, that users will need to do such things in order to keep the software updated.

  lglrg14, you can try running as administrator to see if this solves your problem...

• How to reset the homepage of "Firefox Home Page" when a software I downloaded did Yahoo search as homepage on start engine up-same update did not help.

  I downloaded a software that allows me to convert my laptop into a Wifi hotspot. He asked me (during installation) to set the home page of my browser like search engine Yahoo. After you download it, I tried to update Firefox by clicking "Troubleshooting information", but it hasn1t has worked so far. I would like to see the home page of Mozilla Firefox when I run my internet connection. Kindly help.
  Thank you and best regards,
  Safi.

  Hi, try to run the SearchResetadd-on, which will reset your home page, research and the new tab etc, otherwise.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.