Pavilion 500: passwords in Explorer 11

Similar Questions

• Pavilion 500-108es: problem with HP Pavilion 500 - 108es BIOS? password

  Hello

  We have a HP Pavilion 500-108es provided with

  This screen. "Enter the password for start" would be the translation. Guy said he didn t wrote a password in the BIOS and swear by himself, it seems.

  I tried to remove the CMOS battery, change, a clear CMOS, etc... but nothing has worked.

  ¿Any idea?

  Thank you!

  Hello:

  For your desktop PC, you need to move some jumpers to clear the BIOS password.

  Please see the link below... Erase password settings.

  http://support.HP.com/us-en/product/HP-Pavilion-500-100-desktop-PC-series/5395585/model/6559295/document/c03757575/

  Important: The instructions as you see them on the Web page are not quite correct.

  I modified the instructions below...

  To clear the password BIOS follow these steps:

• Pavilion 500-451nl: controller Ethernet and PCI Simple Communications Center missing

  I bought a new HP Pavilion 500 - 451nl that came with 10 Windows installed.  I did not like the new OS so I refomated the hard drive and installed Windows 7 64-bit.  Now, Miss me the drivers for the following items:

  -Ethernet Controller:

  PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF103C & REV_0C

  PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  -PCI Simple Communications Controller:

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF7103C & REV_04

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF7103C

  PCI\VEN_8086 & DEV_8C3A & CC_078000

  PCI\VEN_8086 & DEV_8C3A & CC_0780

  I searched on the site of HP but very confusing.  Can someone guide me to the right direction where I can download the drivers for the controllers above?

  Thank you

  Silvio

  Hello:

  Try this one... I explored the driver file after extraction of the pilot inside under components and look for the hardware ID you have posted...

  [Intel.ntamd64.6.2]
  ; DisplayName Section DeviceId
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1E3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1CBA
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1C3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1DBA
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1D3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_8C3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_9C3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_8D3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_9CBA
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_8CBA
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_9D3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_A13A

  This package contains the Intel Management Engine Interface driver for support of office models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73237.exe

• How to clear the BIOS on an HP Pavilion 500-214ed

  Hi all

  in a Flash of genius unprecedented I accidentally disabled all the USB ports on my Pavilion 500-214ed. Which now leaves me with a useless system, since both USB keyboard and mouse do not work. So I need to reset the BIOS to factory settings.

  I have found the ROM_RECOVERY (E16) jumper on the motherboard, which I guess is that I need to clear the BIOS, but I can't find a manual or something to let me know which jumper settings, I need.

  Can someone point me in the right direction?

  Thanks in advance

  Steve

  Hi, Steve:

  Normally, you can find that info on the motherboard plug page but it isn't here.

  Have you tried to unplug the PC and carefully remove the cmos battery room and pressing the power button to remove all residual power to the motherboard?

  If all goes well, remove the cmos battery will also clear the BIOS settings.

  But if you look at the motherboard first, there are no jumpers labelled CMOS and password?

• 500-300na Pavilion: problem with Pavilion 500-300na (mother of Memphis-S) - Dead / no beeps sound and video

  Hello - I hope someone can help me please
  
  I have desktop PC HP Pavilion 500-300na.
  The PC worked very well without problem - I went for a stay of two weeks during which the PC was not in use and power was turned off. I'm back from vacation and the PC does not work now.
  
  When you press the power button, the LED lights up, CPU fan, electric fan and the two spin system fan. There is no video. There is no beep error codes. What is it - actually dead.
  If I hold the button for about 5 to 10 seconds, the fans run down, but the rest spinning CPU fan.
  
  What I've done so far:

  Tried another monitor.
  Tried a different power supply.
  Powered by the motherboard on its own with any other disconnected.
  Taken the Cmos battery on the motherboard for 1 min and replaced it.
  Clean the dust from the fans (they were not so bad as to be honest).
  
  The machine worked with in PCI16 slot video card - I removed this for the test. As I can't get into the Bios, I can't put in the work of the "mother video card." Not sure if it is a problem.
  The unit has a strip of 8 GB of ram DDR3 - I tried this in another location without any changes.
  I have not tested the ram. I have not tested the CPU or deleted one of the fans / heat sinks.
  
  Thanks for any help you can provide
  Chris

  Okay, I think THAT I managed to fix it and understand what the problem was.
  
  I think the problem was double - first of all, before the problem started, Technical Assistance from HP have a BIOS update and download. I think that this update changed the Startup Configuration in the BIOS to "ENABLED" Secure.
  
  Not really a problem. . BUT...
  
  The video card I was running was a riser and secure boot DISABLED neeeded and legacy support ENABLED.
  
  I have reset the BIOS using the jumper (bios password) information – I also did a 'blind' changing information from the bios to switch to the use of the video of the motherboard (bash F10 for 10 seconds at the start, then three arrows down, then two returns... This pass BIOS to "Apply default settings and exit"). I don't know who really helped, but the machine comes up in life.
  
  I put the information here, in which case another experience a similar problem.
  
  Chris

• Desktop PC HP Pavilion 500-310a (8.1, 64 - bit) problem since

  HP Pavilion 500-310a Windows 8.1 PC 64 bit

  I bought my PC 4 months and I had one thing after another.

  It is still off after 2 minutes and you will have to re-enter, enter the password to the start screen.  The tiles on the start screen often do not respond and I am often without e-mail, this time it is said on the parameters are not AVAILABLE.  My emails come back to drafts or returned to people I did not in the send to box when he's working.

  I would be grateful if someone could help because I called several numbers, and I'm not getting anywhere except that... they want loads of money to address the problem. I don't know if they are true, I got using the internet figures.

  I'm not familiar with computers or their simple English jargon would be good.

  Cordially D56

  Your system is under warranty, please call Tech support 1 (800) 474-6836 is 24/7 and it's free for you. (call guarantee).

• To access the data from the old hard drive connected to the HP Pavilion 500-242ea

  Recently I bought HP Pavilion 500-242ea (Windows OS 8.1) as my old pc died. I connected the old hard drive via the Usb Adapter kit. The old drive appears in the Device Manager and file Explorer and disk management in drive F, but shows no volume. I know that the old drive is not complete and the drive works as I put the disc in and they charge. When I click on the old drive-F car - in the message "Please insert the disk" leader explore appears. Anyone know how to access the data on the old drive which has the cable IDE.

  Please help need to copy the old drive imporatant files.

  Thank you

  Just had to ask, you know the difference between the hard drive and CD/DVD drive?  Don't get angry, read this.

  You said "I know that the old drive... works as I can put disks and they load. When I click on the old player disc-F-in the message "Please insert the disk" leader explore appears. »

  Anything that involves a CD/DVD drive. You can't put a disk on a hard disk.

• Pavilion 500-336: updated drivers audio HP Pavilion 500-336

  Here's the audio that I have on my computer: IDT 92HD65C

  Looking at the Device Manager, I see that the driver date is 07/11/2013.  Where can I find the updated drivers for this?

  The version of the driver I have right now is 6.10.6496.0

  Is there still a good reason do not update the audio drivers?

  Hello:

  The audio works fine now?

  If so, I would not update the driver.  Many problems with W10 and IDT audio.

  There is an audio driver IDT W10 on your PC support page if the Beats Audio doesn't work properly or not at all.

  6.10.6504.0 Rev.A

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-500-300-desktop-PC-series/6879020/model/7127002

• Pavilion 500 - 200 t: the proccessor upgrade

  I just upgraded memory of my desktop HP pavilion 500-200 t CTO at max (16 GB), I was wondering if I could upgrade my processor or is it 'fixed' to the motherboard?

  Hi @deerpark243,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have questions about upgrades of the processor. I'll be happy to help you.

  First the CPU and does not set on the motherboard.

  Please refer to the motherboard, (Memphis-S) sheet.

  To half way down you will see "information update processor.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Pavilion 500-297c: Boot failure now need to recoversystem

  My Pavilion 500-297c will not start.   All initial tests HD pass ok.   I am running an extended test.   Resetting the system w/maintain files fails.

  I guess even a hard disk failure.   I purchase and install a new HD.  The system came with Windows 8, which has since been upgraded to Windows 10.

  So, I'm going to need some kind of bootable recovery disk HP.  No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Also, given that the current hard drive always seems to work at least in part, I hope to set it up as a second drive on the system once I get the new HD installed.  What is the best way to try that?

  > No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Because Windows 10 _was_ installed on your computer, a "fingerprint" of your computer is registered with Microsoft.

  This 'fingerprint' allows you to download Windows 10, on any computer and create a bootable DVD that can be used on your computer, without having to enter a 25-character license key.

  Reference: https://www.microsoft.com/en-us/software-download/windows10

  There is no need to wait for HP to courier-ship anything for you.

  Tip: buy a new disk drive and install, remove your current hard drive.

  Install Windows 10 on the new drive and then attach the old drive as a "slave."

  and copy all your files to it on the new drive.

• Pavilion 500-056: accidentally disabled my speakers! sound/no

  So here's the scoop. My computer (HP Pavilion 500-056) had been broken for a year now, and I finally fixed and reinstalled windows 10. Everything worked well and I was very happy until I realized that I had no sound coming out of my speakers. Through my process of DIY autour, check the cables and the entry and other output sockets, there seemed to be no problem. I went in the sound mixer, and there, I accidentally disabled my speakers, so they don't pop up on the list more! I have no idea how to turn them on now, and I still have no idea how fix my sound. If someone could help pronto, I would be very happy! Thank you!

  Hello

  If they were just disabled, you can re-enable the as follows.

  Do a right-click the speaker icon in the taskbar and select "playback devices".

  In the next window, right-click on an empty area and enter a checkmark against "Show disabled devices".

  If your speakers are now listed, right-click them, then select activate.

  Kind regards

  DP - K

• HP Pavilion 500-311no: the hp Pavilion 500-311no upgrade

  Hp Pavilion 500-311no desktop PC, I bought a few years ago and now I feel like I would get some more power out of it then is it possible to upgrade this computer. I use mostly this pc for a game so what I'm looking to upgrade is the gpu. It seems that the motherboard supports the latest grphics cards and I think they should also fit the case. Incase of replacement parts, the power supply needs to be replaced probably as well. Also overclocking motherboard support and how the overclocking and replacement parts affect warranty?

  Greetings,

  You have some positives on your side:

  PCIe available x 16 slot 3.0.

  UEFI BIOS.

  Your chassis will limit the duration of the update of the graphics card.

  You have only a 300 Watt power supply.

  Most of the HP motherboards cannot be overclocked. I have a processor Intel 4820 K. HP offers limited overclocking abilities with this processor.

  Check the measurements on the existing power supply.  A diet of 600 runs most new graphics cards high-end. NVIDIA cards tend to require less energy than equivalent AMD cards.

  Check the height of the rear panel input/output where the x 16 slot is to determine the maximum length of a new card.

  Shop for a new card graphics and power supply when you know your limits. The high-end cards are usually double slot. Make sure you have room to install a card double slot. You need to be able to burst a second plate of input/output rear panel to install a dual slot graphics card.

  Modular power supplies reduce tangles of cables in the chassis.

  See you soon!

• How can I replace a 5 in 1 memory card reader in a HP Pavilion 500-027c desktop PC

  I bought a desktop PC computer given to nine HP Pavilion 500-027c Wal-Mart, 2 weeks ago... 5-in-1 memory card reader does not work... the Device Manager indicates that it works correctly, but when I put a memory card, nothing happens... The white light will come on indicating that the memory card has been inserted, but the computer does not recognize that something has been done... I would just replace the card reader itself... I see on the hp support where it is possible to replace the reader of card memory (before I/O), but I don't know where to buy the card reader itself real... I have no card on the card reader either... Help, please!

  Hello

  You can find a list of the parts for your machine:

  http://PartSurfer.HP.com/search.aspx?SearchText=H5P68AA

  What card you use, the machine only supports the following cards:

  • Secure Digital (SD, SDHC, SDXC)

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion 500-314: IDT High Definition Audio works do not (HP Pavilion 500-314)

  Hello.  I have a HP Pavilion 500-314.  It works on Windows 10.  My audio worked fine until I had to reset the computer after my computer went into a loop of "prepare the AutoFix.  Once I reset the computer, there was an 'x' next to the small speaker icon in the lower right corner.  When I move my mouse over the "speaker" icon, he says "no speakers or headphones are connected.  It drives me crazy that the other posts about the IDT High Definition Audio did not work.   I would appreciate a quick response.  Thank you for your time.

  Shayna - Ghram-Kaiser

  Hello:

  Given that I don't know what other posts read you about it, what works for most forum members is to install the audio driver IDT W8.1 support page and the driver of your PC.

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported. -Provides the models of desktop audio driver version and supported operating systems.

  File name: sp65946.exe

  If you have already done this and it has not resolved the problem, unfortunately I don't have any other suggestions for you to try.