Update of the pages after the model update

Similar Questions

• I have Dreamweaver CS6, when I do my .aspx pages are not be being updated the model updates (html are ok).   Any suggegtions?

  When I make a change to the header of my model (using dreamweaver CS6) my .asxp pages are not updated.   Any suggestions as to why this could happen?

  To deepen our questions, we remembered that we had renamed the main level of the aspx pages folder, after that we have applied the model.  Once we have created the new folder in dreamweaver with its respective aspx pages, we were able to apply the model and changes to the model propagated down to the pages as expected.

• Windows Update has encountered an error and cannot display the requested page after that I click on express update.

  Original title: page Web update always comes back also cannot display the Web page after that I click on express update.

  Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d

  Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014

• Cannot find the model of my laptop BIOS update page

  Hello. I have a HP Pavilion dv6-6154tx notebook PC. My latest version of the BIOS installed is Hewlett - Packard F.1B, 10/05/11.

  I wanted to check if my BIOS is up to date, and if there was a newer version of the BIOS available.

  So I went to the HP support for laptop page (http://h22207.www2.hp.com/us-en/products/laptops) and chose Pavilion laptops > models dv4000 to dv6999 > dv6000 Entertainment Notebook PC series > products outside the corresponding United States.

  But alas, I couldn't find the model of my laptop which are listed there. It has dv6150tx and so he climbs to dv6161ea, but not dv6154tx.

  What should I do now? Is there another way, I can update the BIOS of my laptop?

  Thank you.

  Hello

  You can find your page notebooks driver at the following link, but it doesn't look like bios version F.1B is the last.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5167394#N11064

  Kind regards

  DP - K

• Model number: how to fix the pages so that they update when updates to the model?

  I've created dozens of pages using templates and I forgot to check the "update of the page when the template is changed" I created the pages, defeating my purpose for the use of the models. How can I edit the pages so that they update when I change their model?

  I tried to modify > templates > update Pages (and update current Page) but nothing change.

  I use Dreamweaver CS4, Mac system. Thank you!

  Sorry - there is no quick fix because by not checking this option, the 'child' pages are created with NO markup model at all.

• Dreamweaver 8.  Update of the model does not appear in other pages

  I created a template for my Web site. All pages in the Web site is used. Sometimes when I change the model and save, it queries on save the template and update the pages using the template. Sometimes he asks only to save the model. I just had to model and want the changes to be made in the related pages, but I can't ask him if I want to update the pages. What I am doing wrong? Also is there a way to force all pages that use a model to be rerfreshed from the model? (Changes in the model, I had attended a non editable section). Thank you

  That would certainly do. I would add that, as the means of 8? No - this is the case
  unlikely, I don't think I would! 8)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "annpmul" wrote in message
  News:ea33q5$Go7$1@forums. Macromedia.com...
  > I found my problem. I was not using the correct model dwt file.

• Incorrect paths for active content after the update of the models

  When I apply a new model with a page in Dreamweaver CS3 all links updated correctly with the exception of any content active. The paths of active content (files .swf) point to the correct locations. The paths to the files remain the same, as if they were always pointing towards the model. All other links and paths are updated properly (images, links), but not the Flash. Everyone heard talk of this problem/bug? I just can't understand why it's happening.
  I must add, however, when you open a new document from the template links ARE correct. Only when the application of the template to a page, or when I update the model and update the pages associated with it that happens. Am I missing something?

  Thanks Murray. Who did the trick.
  I guess I'll use only the paths relative to root for the insertion of these objects in the future.

  Detective Conan!

• Certificate autoenrollment fails after the update of the model

  Asked me to extend the period of validity on the certificates that we issue to users to authenticate on our wireless LAN. Group Policy allows us to cause users to automatically enroll for a certificate by using a version 3 template (our issuing CA is Windows Server 2003 Enterprise Edition). Users were able to automatically enroll for certificates with no problems.

  To increase the duration of validity, I modified the model certificate as a business administrator (I also increased the renewal period), then forced all certificate holders to re-register, which changed the model on the CA to 101,0 version (previously it was 100.2).

  None of my users seem to be reenrolled for the updated certificate. The search Event Viewer on my PC, I see four 'CertificateServicesClient-CertEnroll' information events (event ID 65, 64 & 66) suggesting that I connect successfully to the issuing certification authority, followed by a source "CertificateServicesClient CertEnroll" error (event ID 13) and error (ID of the event 6) source "CertificateServicesClient-autoenrollment" (details below). This sequence is generated whenever the autoenrollment is triggered.

  Can anyone suggest what could be the problem here? Thank you very much, Damion.

  Log name: Application
  Source: Microsoft-Windows-CertificateServicesClient-CertEnroll
  Date: 18/07/2011 08:44:24
  Event ID: 13
  Task category: no
  Level: error
  Keywords: Classic
  User: domain\user
  Computer: COMPUTER.exe.nhs.uk
  Description:
  Registration certificate for user domain\username could not enroll a certificate WirelessUser with the ISSUINGCA.domain\Issuing CA 19934 request for domain ID (the request template version is newer than the version of the model of support. 0 x 80094807 (-2146875385)).

  Log name: Application
  Source: Microsoft-Windows-CertificateServicesClient-registration auto
  Date: 18/07/2011 08:44:25
  Event ID: 6
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: COMPUTER.exe.nhs.uk
  Description:
  Automatic registration of certificate for domain\user failed (0 x 80094807) the request template version is newer version of model taken in charge.

  This problem has been resolved by a restart of the server.

• How to get rid of the Windows Server Post-Setup security updates after deployment of the model

  Hello

  I installed w2003 from zero, configured and set as much as I could. When I rebooted the VM, it is online and ready to use. I converted it to the model. I've implemented the following personalization settings:

  & lt; ConfigRoot & gt;

  & lt; _Type & gt; Vim. CustomizationSpecItem & lt; / _type & gt;

  & lt; Info & gt;

  & lt; _Type & gt; Vim CustomizationSpecInfo & lt; / _type & gt;

  & lt; changeVersion & gt; 1245322835 & lt; / changeVersion & gt;

  & lt; Description / & gt;

  & lt; lastUpdateTime & gt; 2009-06-18 T 11: 00:35Z & lt; / lastUpdateTime & gt;

  & lt; name & gt; 2003 & lt; / name & gt;.

  & lt; Type & gt; Windows & lt; / type & gt;

  & lt; / info & gt;

  & lt; spec & gt;

  & lt; _Type & gt; vim.vm.customization.Specification & lt; / _type & gt;

  & lt; globalIPSettings & gt;

  & lt; _Type & gt; vim.vm.customization.GlobalIPSettings & lt; / _type & gt;

  & lt; / globalIPSettings & gt;

  & lt; identity & gt;

  & lt; _Type & gt; vim.vm.customization.Sysprep & lt; / _type & gt;

  & lt; guiUnattended & gt;

  & lt; _Type & gt; vim.vm.customization.GuiUnattended & lt; / _type & gt;

  & lt; autoLogon & gt; true & lt; / Autologon & gt;

  & lt; autoLogonCount & gt; 2 & lt; / autoLogonCount & gt;

  & lt; password & gt;

  & lt; _Type & gt; vim.vm.customization.Password & lt; / _type & gt;

  & lt; clear & gt; false & lt; / plain text & gt;

  & lt; value & gt; XXXXXX & lt; / value & gt;

  & lt; / password & gt;

  & lt; time zone & gt; 85 & lt; / time zone & gt;

  & lt; / guiUnattended & gt;

  & lt; identification & gt;

  & lt; _Type & gt; vim.vm.customization.Identification & lt; / _type & gt;

  & lt; joinWorkgroup & gt; WORKING group & lt; / joinWorkgroup & gt;

  & lt; / identification & gt;

  & lt; licenseFilePrintData & gt;

  & lt; _Type & gt; vim.vm.customization.LicenseFilePrintData & lt; / _type & gt;

  & lt; autoMode & gt; perSeat & lt; / autoMode & gt;

  & lt; / licenseFilePrintData & gt;

  & lt; userData & gt;

  & lt; _Type & gt; vim.vm.customization.UserData & lt; / _type & gt;

  & lt; computerName & gt;

  & lt; _Type & gt; vim.vm.customization.VirtualMachineNameGenerator & lt; / _type & gt;

  & lt; / computer_name & gt;

  & lt; fullName & gt; XXX & lt; / fullName & gt;

  & lt; orgName & gt; XXX & lt; / orgName & gt;

  & lt; productId & gt; XXXXXXXXXXXXX & lt; / productId & gt;

  & lt; / userData & gt;

  & lt; / identity & gt;

  & lt; nicSettingMap & gt;

  & lt; _length & gt; 1 & lt; / _length & gt;

  & lt; _Type & gt; vim.vm.customization.AdapterMapping [] & lt; / _type & gt;

  & lt; e id = "0" & gt;

  & lt; _Type & gt; vim.vm.customization.AdapterMapping & lt; / _type & gt;

  & lt; adapter & gt;

  & lt; _Type & gt; vim.vm.customization.IPSettings & lt; / _type & gt;

  & lt; dnsServerList & gt;

  & lt; _length & gt; 2 & lt; / _length & gt;

  & lt; _Type & gt; String [] & lt; / _type & gt;

  & lt; e id = "0" & gt; XXXXXX & lt; /e & gt;

  & lt; e ID = '1' & gt; XXXXXXX & lt; /e & gt;

  & lt; / dnsServerList & gt;

  & lt; Gateway & gt;

  & lt; _length & gt; 2 & lt; / _length & gt;

  & lt; _Type & gt; String [] & lt; / _type & gt;

  & lt; e id = "0" & gt; X.X.X.X & lt; /e & gt;

  & lt; e id = "1" / & gt;

  & lt; / Gateway & gt;

  & lt; IP & gt;

  & lt; _Type & gt; vim.vm.customization.UnknownIpGenerator & lt; / _type & gt;

  & lt; /IP & gt;

  & lt; primaryWINS / & gt;

  & lt; secondaryWINS / & gt;

  & lt; subnetMask & gt; 255.255.255.0 & lt; / subnetMask & gt;

  & lt; / adapter & gt;

  & lt; /e & gt;

  & lt; / nicSettingMap & gt;

  & lt; options & gt;

  & lt; _Type & gt; vim.vm.customization.WinOptions & lt; / _type & gt;

  & lt; changeSID & gt; true & lt; / changeSID & gt;

  & lt; deleteAccounts & gt; false & lt; / deleteAccounts & gt;

  & lt; / options & gt;

  & lt; / spec & gt;

  & lt; / ConfigRoot & gt;

  everything's fine, the virtual machine gets deployed perfectly, with the 1 question, it ends with

  

  all security updates have been installed on the original vm (the one I did the model from) and the automatic updates on. The problem is obvious... Deployment + customization allows you to deploy the virtual machine in a few clicks without interacting with the operating system, but now I have to go and click on the Finish button for the virtual machine online. Does anyone have a quick remedy for that? Thank you

  You must create a key in the Windows registry.

  See:

  http://TechNet.Microsoft.com/en-us/library/cc757061 (WS.10) .aspx

  André

• Updated the models encourage not updated on sync

  After talking with an assortment of people Adobe, I was advised to take my question on the forums to see if someone else might have a workflow that will accomplish what I am trying to acquire: a model master centralized control, out of which subsites can base their models. (I apologize ahead if my entry takes an arrogant tone.) For brevity, I'm being pretty straightforward - I'm not really a Dreamweaver-enemy.)
  
  Here's the full version:
  We are a large company, and the public Web site is all custom code. However, we have many departments, and many of them have their own public information sites. We use Dreamweaver on a departmental level for the public web site of each service, managed by a person designated by him in this Department. The idea is to have a "company" basic model that establishes the catch-all provision that each of my Department webmasters can use as the basis to create a template for the site of their Ministry. Theoretically, they don't would be concerned with the details for their Department and would inherit a widespread company container from the main template. (Currently, it's the Wild West, and each Department is responsible for their own model - you can imagine the wild variations in appearance through our presence on the web.)
  
  When I initially created each service to have a web site, I manually create their models / directory on the server and put the main template in this directory (in fact, each Department has just a symbolic link to master, but I digress). The permissions are such that they cannot edit this file on the server. (They obviously can change it locally, but it can never be replaced on the server - if I could lock it so that they could not accidentally change it locally, I would do it; but I don't know how to do such a thing without having a flag 'read-only' on the model or something Dreamweaver.) Yet once again, I digress.)
  
  In any case, what I want to do is the following: in the event that the main template on the server changes (which would result in the file of Templates/Master_Template.dwt for each service I placed there immediately appearing to have been changed), I might have users synchronize their site (that overused realization of Dreamweaver that changed the model), pull down the model and be invited to update their template Department (because it is based on the model of 'master' now-changed), which would be cascaded to update pages based on the model of their Department. Theoretically, this should work, because if you actually open the local copy of the Master_Template.dwt, change and save it, the update process works exactly as it should.
  In the real world, however, the "...". and update their Department model... "part is where the process stops, because when a template file is updated via synchronization rather than change manually, either this opportunity to update all dependent resources (potentially outdated) is presented.
  
  It was suggested to use Contribute for the Department, but Contribute sites with no knowledge of the elements of library or the modification of the model, it should be I have centrally manage * all * models instead of just the main template - and that's exactly what I'm trying to escape to do by delegating peacekeeping each ministerial department site.
  
  The only work around I can think of is this: in the case of an update of the master model, have each user synchronize their site, pull down the new master, open it, make a few simple changes (a space or similar), delete it (so the model can be saved) and then save the now-modified-but-not-actually-changed local main template file, which would engage the update that I'm looking.
  
  Such a process might generously describe "subject to error."
  
  I'm a little surprised that this kind of thing has not been processed (that I can find) front. If it was, I'd like a link. The solution is such a good fit that I'm reluctant to give up Dreamweaver and go with something else - looks like a lapse such small feature - but he tanks completely the overall strategy.
  
  Frankly, I think it is a bug. I don't think it matters how or by whom the changes made to the model - if Dreamweaver ever notice that the model is different, he should realize that any resource based on this template could potentially be stale and offer the possibility to update. Or, at the very least, there should be a way to "Refresh" the site - have Dreamweaver compare the State of each resource to their ancestor model (s) to check the consistency and offer the opportunity to upgrade at that point to the possible contradictions. Something else that "synchronize your site, open the main template, add a space, delete, save, updates start" would be a better solution to workaround.
  
  I can't wait to hear suggestions, however.

  Quote:
  Posted by: newsgroup user
  I'm not aware anyway make it work the way you are the Template of DW engine
  describing. The Templates folder and its files of constitutive models MUST be
  in the root of the site.
  However, I confess, I have not read your post in full to extract all the
  the granularity that you offered. If I missed something, please let me
  don't know.

  No, has nothing to do with what I'm trying to do.
  However, I received a correction to part of my message of an engineer from Adobe:

  Quote:
  Hi Travis,
  I read your post on the forum and agree it would be nice to have this kind of functionality in Dreamweaver, but because this isn't the standard use case (a site other subsites of conduct), you have to pass through a hoop more in Dreamweaver, rather than simply synchronize.
  I don't think you have to do the steps, opening the modified model, bringing a change, delete, and save. On the other hand, it please try the menu item:

  Modify > templates > update Pages.

  This should update all pages according to the current state of the Templates folder. Thus, instead of your steps: "synchronize your site, open the main template, add a space, delete, save, launch updates. Please try:
  1. synchronize Site
  2. modify > templates > update Pages...

  I totally forgot this menu item - it provide a usable workaround.

• Multiplication of updates to surveillance of the models for a group of Directors in OEMCC 12 c

  My understanding is that if a surveillance model is part of a collection of model associated with a group of Directors that changes to the model of surveillance are propagated so that changes to the surveillance model affect all members of the group.  However, I brought the changes that are not spread (even after synchronization should be given).

  Is my understanding of the propagation of changes to correct follow-up of models?

  Updates to a collection of models must be propagated to the target in the regular group of Directors for the next model synchronization operation. If the changes have not been propagated, you can check the following:

  -Model synchronization has occurred by looking at the status of synchronization.

  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/administration_group.htm#EMADM12505

  -Model has been applied with success (for example navigate to Enterprise > surveillance > models of monitoring, select a template and click on last operation apply)

  Kind regards

  -Loc

• Regarding the model updates, what means this error message 'not updated, point not found' mean?

  This is the second time I've posted this question so I hope someone will answer. In recent weeks, I found that I could apply is no longer a model in a group operation (returns the error above). If I change the model and save it shows all files associated with the update but does not actually update them and again returns the error 'not updated, point not found'. As a test, I created a copy of a .html special and enforced the associated model file. When I apply a change of model, it does correctly update the newly created file, but not the others. I also made a comparison of mechanical (by using windiff.exe) between the original file and duplicate file, and there is NO difference in both .html files. I also deleted and then recreated my cards site several times.

  As an aside, elements of library successfully.

  I use Dreamweaver CS6 on Windows 7.

  OK, here's an update. The three sites Web I was working on is gone live this weekend. As part of this activity, I created a new source folder in My Documents where I loaded the production version of the code. I created new DW sites for each and have begun changes in final production code which resulted in a number of model and the library updates the many pages on the sites. If you remember, the updated library mass worked fine but the update of the model is not. Well, I'm not sure what has changed other than the location of the source folder, but all works normally now. Go figure. I'm not complaining but just confused because I had been through this drill before.

  I guess there is no need of the cavalry. Thanks again for your help.

  Al

• Image links are not updated in the model

  If I create a template page, not all the image links are updated, more precisely, mouse over event links are not updated. Is there something I need to change to get these links to change the model? I use Dreamweaver CS6

  You used behavior of image for DW swap on these mouseovers, links would be updated.  Your manual approach is causing DW miss those links when it updates the pages.

• kaosweaver and updating the model

  When KW will add a code to the head tag of a page that is linked to a template, update the model itself removes the code KW in the linked page?  Apparently not, but I would like confirmation.

  Thank you

  I better leave it as what as he works, I can say?

  I'll fix it.

  Where can I insert editable regions, you suggested in the template?

  In the template file, change it.

  on this subject.

  and this-

  on this subject.

  Now you should be set.

  When you apply a template of what I think to decide on the allocation of the parts?

  What will change on each page.  These are editable regions.  Or do you mean that you apply patterns to existing pages?  It's MUCH more embarrassing.

  I'm surprised DW allowed me to spoil the model - unless I simply ignored the warnings?

  I remember well, DW8 would allow you to create a new template so that it did not contain these necessary areas - maybe it was the file > new model?

  I do not know...

• Where is the model of update files dialog box?

  I change my template, click on file, save all.  It saves but does not open the template files update dialog box.  It does not update the pages based on the template.  What I am doing wrong, how can I fix?  In the preferences on the General category I update links when moving files: Prompt is selected.

  Here are seven common mistakes which will result in changes of proliferation do not model for child-

  1 rename the Templates folder

  2 move the folder models to another level of folder in the site other than the root level

  3. move a template outside of the Templates folder.

  4 changes to an editable model (which is not set)

  5. on the assumption that the changes made to the model will be will be by simply downloading the file Template modified on the server without downloading also files the modified

  6 corrupt the site cache to make the link between the model and the child page is broken

  7 create your child pages simply by opening the model, adding specific page content and re-record the model with an extension rather than expanding *.dwt *.html. (you can tell if this is the case by looking at the code on a page of the child - if you see something like