Update preview DNG and metadata issue

Similar Questions

• Preview RAM and general issues of speed

  Dear experts,

  I have a little problem. When I go for a RAM Preview, sequelae decides to stop and have a think for a few minutes. This occurs even on images low resolution and without any audio.

  I'm also a bit disappointed by the speed General I get in After Effects, but fear it's something simple, that I do in my memory settings.

  Please take a look below at my preferences of the AE and system information. Thanks much for any help. (There is not much else running on my computer)

  

  Disable multiprocessing. Pointless exercise even try with only 4 GB of RAM...

  Mylenium

• How can I make Lightroom correctly handles errors on the function "Update DNG Preview and metadata?

  It is more of a bug report, but unfortunately I can't find a good place to put it.

  Steps to reproduce:

  -Produce an invalid DNG (a corrupt)

  -J' Iintroduce yourself in your catalog (replace valid)

  -Select the invalid image (or any group container) in Lightroom

  -Select "metadata-> Update DNG previews and metadata.

  -Wait until the heat death of the universe

  Actual results:

  -At the end of the universe, Lightroom has yet to alert the user and behaves as if the update is running (progress bar is visible but empty)

  Expected results:

  -Lightroom displays the same error popup displays for other processes as 'Validate the DNG files', allowing the user to see what pictures are problematic and fix them (by a restore from a backup)

  System:

  -Retina MacBook Pro 13 ", end of 2013

  -Mac OS X 10.10.3

  -Lightroom CC 2015.1.1

  You can report and track issues here:

  http://feedback.Photoshop.com/photoshop_family

• Bug - Update DNG previews and metadata?

  I am relatively new to using Lightroom, so maybe it's not a bug, but it certainly doesn't seem fair...

  When I choose [metadata > Update DNG previews and metadata] my pre-selection of metadata saved previously is cleared. I was in the habit of using Ctrl + S to save the metadata in a photo, but I read in the help file for the following:

  " If you work with a DNG file, choose metadata > Update DNG previews and metadata to save changes to metadata in the file and also generate an overview based on current raw processing settings. " ".

  This should not happen; It could cause a lot of grief. Or is there something I'm missing here?

  Reapply the preset will result in no loss of data, nor can it delete the original.

• DNG files, metadata and catalog

  Hello I currently have LR2.7 64-bit running on W7 64 bit. My camera captures native DNG (Leica M9). I import via "Convert to DNG and add to the catalogue" worth compression without loss for files when importing (for copy and extra copy on external hard drive). I prefer not to rename files on import as my first sorting level is contiguous numbering of all original.

  I'm little upgrade to LR3, however I'm waiting for the resolution of the problems reported with the catalog updates. My plan is to first import the images to the laptop when traveling and important copies to my desktop, a first action to return. I understand that there may be issues of import and export of catalog files on both machines currently duplicate with. I prefer a lot to keep multiple copies on computers apart until I swallowed the files in my normal diet at home.

  I'm looking options to avoid rebuilding a catalog, if something is not bad. I prefer to keep initial develop information, Keywords, changes of ratings made on the laptop.

  I understand that the development parameters are stored in the DNG itself rather than in a file. I'm not sure just where each type of information is stored, which is listed in the file and in the lrcat file. I understand that previews are inconsequential, because I need to be updated in any case those who, after the changes.

  So specifically, if I just copy the DNG files after my initial changes on the laptop with the main machine, what information willl be kept and who will be lost if I throw the laptop catalog to reduce to nothing all the problems with import/export?

  Development settings?

  Keywords?

  Ratings/labels?

  I have the ability to import via CS5 on both machines but try to optimize my use of LR for as many functions as possible.

  Develop settings are the final position of the sliders in the develop module. With this information, Lightroom can make the photo with your changes. You do not lose this information if you write to XMP and then reimport into Lightroom.

  Develop the story is the sequence of steps that you followed to reach the final position. You lose that when you write to XMP and then reimport into Lightroom.

  I guess I don't understand the point of the exercise (unless it's purely an educational exercise). If you export in the catalog, and then import from catalog, something that Lightroom is very easy to do, you don't lose any of the catalog information.

  So, you have at your disposal, a method that retains all the information catalog; and a method that doesn't work. Which one will you use?

• Help a update my computer resembling windows 95 and document issues! :(

  Hi I have not used my computer in about two weeks. I just turned on my computer and configured an update, rebooted and then proceeds to set up. He went to my screen which showed a background image of hello kitty that I placed there connection. But once you ID and waiting for my computer fully load the bottom black screen that must be an image, my startup toolbar looks like windows 95, all my documents does not appear when you click documents early upward (images, word, etc.), when you click on the download folder it gives me an error saying that I need a program , it shows that all my documents (images words, downloads, etc.) when I click on the name of my computer in the start menu up, which is strange, my computer mouse can be an animated hello kitty but now its back to normal, I lost all my favorites and I must now re-implementation to date of what was updated. Anyone have any ideas on how to help me with this? Or is it a new update of all HP computers have? I have a Windows 7 Home Premium HP.

  Thank you!

  P.S. When I say my computer it looks like Windows 95, I mean, fonts, and everything changed. The only thing that miss me is the challenge of chips and chimera, then it wouldn't be so bad lol.

  Hi I have not used my computer in about two weeks. I just turned on my computer and configured an update, rebooted and then proceeds to set up. He went to my screen which showed a background image of hello kitty that I placed there connection. But once you ID and waiting for my computer fully load the bottom black screen that must be an image, my startup toolbar looks like windows 95, all my documents does not appear when you click documents early upward (images, word, etc.), when you click on the download folder it gives me an error saying that I need a program , it shows that all my documents (images words, downloads, etc.) when I click on the name of my computer in the start menu up, which is strange, my computer mouse can be an animated hello kitty but now its back to normal, I lost all my favorites and I must now re-implementation to date of what was updated. Anyone have any ideas on how to help me with this? Or is it a new update of all HP computers have? I have a Windows 7 Home Premium HP.

  Thank you!

  P.S. When I say my computer it looks like Windows 95, I mean, fonts, and everything changed. The only thing that miss me is the challenge of chips and chimera, then it wouldn't be so bad lol.

  Hello

  Are you sure it is an update of Windows and not an update of HP?

  If an HP update, you will need to contact them.

  _____________________________________________________

  Do a Safe Mode if necessary system restore to prior problems.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  _____________________________________________________

  If graphics problems persist after that:

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  ______________________________________________________

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• I have some serious issues update to existing and new to download applications.

  Hello

  I just bought a laptop with w8
  I have some serious issues update to existing and new to download applications.
  When I click to download an app it still works but does not settle anything.
  at this point, I can't click the back (arrow) button to return to the main image of the store
  the windows button works and I can continue to use my computer
  the new application (or the update for an existing one) is not installed.
  Here are some useful points:
  -No installation other than Mc. provided McAfee antivirus preinstalled.
  -computer is not in a proxy connection
  -windows update does not work, when I click it works forever without doing anything
  -J' have tried to run the troubleshooter, but it fixes all the time the same 2 questions and that solves nothing
  -J' I reset the cache to store without change
  -without any logical explanation, some updates and downloads have managed at the beginning. then, when the problem started I have reset the cache and I could download a couple more. now everything is blocked and no solution found on this forum does not work.
  Please help me
  thanx
   
  Original title: problem with store windows

  Hello

  I suggest to run the following command and check to see if it helps.

  To fix Windows Update errors, use Deployment Image Servicing and Management.

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2 type the following commands. Press ENTER after each command.

  o DISM.exe / Online/Cleanup-image /Scanhealth

  o DISM.exe / Online/Cleanup-image /Restorehealth

  3. close the command prompt, and then run Windows Update again.

• I want to confirm that the update of Adobe Reader 10.1.15 is legitimate.  This update apparently fixes security vulnerabilities and customer issues.

  I want to confirm that the update of Adobe Reader 10.1.15 is legitimate.  This update apparently fixes security vulnerabilities and customer issues.

  Hi Jeremiah,.

  Yes, the Player update 10.1.15 is legitimate.

  In fact, we released the latest patch 10.1.16 October 13.

  You can download the same: Adobe - Acrobat: for Windows

  For immediate release notes please reference: https://helpx.adobe.com/acrobat/release-note/release-notes-acrobat-reader.html

  Kind regards
  Rave

• Windows updates and logon issues

  Two quick questions, please:
  1: when the updates of Windows 7 contains new updates, is there a way to still display the latest updates that I refused? With XP, I could click on an option indicating that those who refused the updates would display is no longer. I have always to investigate these things and exclude those who do not apply to my situation. I don't want to have to re - investigate each of them whenever he appears.
   
  2: I have my system starts automatically for a certain user, namely me. Is it a key shot or something that would make it to start the administrator sign-in, instead, when needed, vs having to enter in the "me" user first, and then disconnect, etc.?

  Thank you. I was not able to find answers to these questions, probably because they are a little weird.

  1. you can select the update right click and select hide.  Then he stops to appear.

  2. until the Welcome screen appears, hold the SHIFT key to get to the login screen.

• Lost photos and workflow issues

  I have a question which is perhaps a bit lengthy...

  I have CC on two computers, my laptop that I was using CC on since a year now and my work computer that I use CC on since a few months. I went to grab the raw version of a few images from my work computer to find that they had never actually been saved. They had been available in LR before, but then I went from catalogs, and when I went back to the original, I had the "!" error on all my photos. What I did not know before, but now I know, it's that LR only saves a virtual copy of the image. However, I didn't do anything differently when downloading pictures to my work computer, and I've never had this problem on my home computer. In fact, I can go to my computer and see that all the images in RAW saved in my files.

  So I guess my question is, how can I change my workflow when it comes to images so that this doesn't happen? Also, why the images are saved on my drive of your personal computer? Is it because I saved before lightroom?

  I am very confused.

  The problem with the icon exclamation point on your photos has nothing to do with 'save' photos, or save changes to the metadata. Your changes and metadata are automatically saved in the catalog file (in fact, you can not disable this option). So your changes and metadata are always saved, there is no change in the required workflow.

  Exclamation point icon indicates that the file of the photo itself is not found in the location Lightroom think that the photo is in. This could be because you have renamed, moved or deleted the actual photo file (or the folder that contains it) outside of Lightroom. Under Windows, it can also indicate that the player now has a different drive letter. To resolve this issue, please follow these instructions: Adobe Lightroom - find folders and files moved or missing

  What I did not know before, but now I know, it's that LR only saves a virtual copy of the image.

  Technically, not true. Lightroom saves the editing command sequence you have done, and whenever he needs to show you the photo in the develop Module, it makes the image of these change orders. In the library Module, Lightroom is based on previews it creates to show you the image (which are not a "virtual copy" of the image).

• Time to update the BIOS and firmware of remote management?

  I'll put up a 'new' ThinkServer RD630 (2954A6U). It was purchased for a project that never happened, and we are now dry and reuse to replace an old Office Server. The current firmware versions are:

  • BIOS: 2.05
  • ME: 2.1.5.73
  • BMC 1.7
  • IPMI 2.0

  Page 61 of the User Guide ThinkServer says, "update the BIOS on your server only if the new BIOS version specifically solves a problem you have. We don't recommend updates to the BIOS for servers that do not need. [...]"

  As far as I know, we have no problems. The system starts fine and runs Windows Server 2012 well enough.

  HERE'S MY QUESTION:

  Should I update the BIOS and firmware IMM (remote management) to the current version? Are there hidden problems, security issues or other concerns that it is worth?

  Other indicators of initial configuration that you can share with a new admin would be much appreciated, too! Thank you.

  With the help of the Lenovo Support, I was able to fix my problem where I couldn't get to the menu of the BIOS of the 630 RD (in F1) and all I saw was a cursor on the screen. I describe the procedure in detail here:

  https://forums.Lenovo.com/T5/ThinkServer-rack-mounted/BIOS-settings-blank-with-cursor-after-BIOS-UPD...

  Thank you to all those who commented above and especially to those who have sent me suggestions via PMs.

• Security update 2015-007 and 008-2015 break 10.9.5 printing

  2015 updates security-007 and 2015 - 008 times break impression on Mavericks (10.9.5) from several applications including display PDF in preview, Word (Office 2011) and Pages on my MacBook Mid of 2012 Pro and Mid 2011 iMac 21.5 inches.  Both worked perfectly until the installation of these updates of security resulting in a font substitution odd (rectangles instead of the characters of irregular shape) at two previews print output printed in several different printers from different manufacturers.  First of all, I met this with security update 2015-007 and was able to remedy this by reinstalling Mavericks and install all updates EXCEPT security update 2015-007.  I hope that the updated 2015-008 security would be this patch, but I have exactly the same problem with printing.  Once again, the solution is to reinstall the Mavericks and do NOT install the security update.  In the details of these two patches, there something about a change in the authentication of the police to prevent the execution of malicious code.  This seems to be breaking the Mavericks called police.  Update to Yosemite or El Capitan was perhaps a work around, an absolutely essential piece of software I use (medical Dragon Dictate for Mac v3.x) runs only on the Mavericks and not later (SHAME ON NUANCE for not updating their software to run on MacOS versions up to 3 years and more after the release and SHAME on them to charge over $ 500 just to be able to run on Yosemite and not El Capitan!).

  This isn't a problem with Office 2011 as a pure delete and reinstall does not solve the problem.  He also the effects of several aps print native Apple, including the overview and Pages. Only do a clean reinstall of Mavericks without the security updates solve the problem.

  Apple has really need identify the bug and the patch for the next security update and test specifically in 10.9.5 with Office 2011.  Other applications which are both of these computers include Dropbox and office of carrier running on a large system level, but none of these applications have nothing to do with the policies of handling or rendering.

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

  Or you can use your Apple ID to register on this site and go the Apple BugReporter. Allegedly, you will get a response if you submit your comments.

  Comments via Apple Developer

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite

• Trying to update my ipod and he repeats the mistake - 69 change my settings, but that change

  I'm trying to update my ipod and it says: error - 69 and change settings which settings

   
  [Moved from comments]

  Hello

  iPod is an Apple product,

  You need either Apple Support or in their Discussion Forums.

  "iOS: Troubleshooting update and restore issues.

  Symptoms

  Follow these steps if you receive an error or a warning message when you try to update or restore your iPhone, iPad or iPod touch via iTunes.

  http://support.Apple.com/kb/TS1275

  iOS: unable to update or restore

  Follow these steps to perform a restore from recovery mode on your iPhone, iPad or iPod touch.

  http://support.Apple.com/kb/ht1808?viewlocale=de_DE

  And Apple Discussions:

  iPod touch

  https://discussions.Apple.com/community/iPod/Ipod_touch?CategoryID=221

  More old iPods

  https://discussions.Apple.com/community/iPod/older_ipods?CategoryID=146

  See you soon.

• my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  Hello
   
  (1) what version of Windows are you using?
  (2) remember to make changes to the computer before the question?
  (3) what browser do you use for Internet Radio?
  (4) what do you exactly mean by the loss of the webradio?
  (5) on which site you want to play the radio?

  (6) using WIndows Media Player to listen to Radio Online?
   
  See also a few following articles dealing on VoIP.
  Troubleshooting VoIP
  http://TechNet.Microsoft.com/en-us/library/ff849747.aspx
  How IP phones connect to the network
  http://TechNet.Microsoft.com/en-us/library/gg425740.aspx
   
  Get back to us with more information on the issue so that we can better help you to provide the resolution.

• CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3adefda0-69f3-4075-96ee-e2c61bd599cc>